RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

How to create MapInfo Vector file?

To create MapInfo Tab (vector) file from vector data, please follow the steps given below…

Start MapInfo, select file type as “Microsoft Excel” and open the excel sheet containing vector data

for On-Air Macro sites.

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Check the check box and press OK

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Set Field Properties window will appear. Press OK.

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

A MapInfo Table will be created as shown below:

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Open MapBasic Program SiteSee2.3

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Go to Table WFI SiteSee Create Site Boundaries

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Choose latitude and longitude from the columns lat and long. Choose Site radius = 0.3 (Km),

Beamwidth = 45 (degrees), orientation from the column Planned Bore and press OK.

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Save the table as fans.

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Now open the fans table.

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Another window showing Site Fans will be displayed as shown below:

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Go to Maintenance Table Structure and select the fans table.

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Modify Table Structure window will open up. From this window select the values that you want to

be displayed in search and press OK.

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Now Go to Layer Control and change the display of Site Fans as per your wish.

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Label the Site Fans with Site_ID from Layer Control.

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

Now add other layers like Roads, Cluster Boundaries, Labels etc by opening them in the Current

Mapper as shown below:

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

RF Optimization Team (North) Ufone (PTML)

Prepared by: Nasir Hakeem

--------- THE END --------