Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
VECTIS - VINIS - DUO
www.tecnoma.com
VINIS, DUO and VECTIS3 sprayers with different designs to answer every specific need.
VINISpump + turbine + boom on the front
DUOspraying unit on the 3 point linkage with an articulated trailer behind
VECTISpump on the front / turbine + boom behind
Lift arm linkage on vectis
articulated drawbar on vinis
cranked sliding half axle
a modern design to optimize appLication, with a mixture of ergonomics, performance and environmentaL respect.
ChaSSIS a reliable design to resist intense use in any conditions.
Fabricated steal chassis �Polyester coating and epoxy primer for extreme chemical �resistance
LINkagEcreated to maximize stability and steering.
VINIS: articulated drawbar for tight turning �DUO: 3 point linkage spraying unit with an articulated �trailed tankVECTIS: Link arm hitching with rotating drawbar and �longitudinal settings
axLESmultiple settings to adapt the equipment to any vineyard.
2 cranked half axles sliding into an axle holder => track �width and clearance settingsLongitudinal setting for the axle position �
main and rinsing tanks on vectis
tank equipment
automatic belt tensioner
vectis turbine column
TaNkSthe tanks were designed to minimize residual spray and to facilitate the rinsing management. the tank assembly has a smooth ergonomic shape to preserve the vegetation whilst driving through the crop.
High density polyethylene rotomoulded tanks, for rigidity �and durability with smooth inner tank walls to limit waste residues for easy cleaningVINIS and DUO tanks: �
Main tank: 600 ℓ and 800 ℓ -Rinsing tank 55 ℓ and 70 ℓ -
Narrow VECTIS tanks: �Main tank: 800 ℓ and 1000 ℓ -Rinsing tank: 85 ℓ -
Standard VECTIS tanks: � Main tank 1000 ℓ and 1200 ℓ -Rinsing tank: 120 ℓ -
15 ℓ built-in hand wash tank �Variable pressure agitation to keep an even mixture �2 rotating washing nozzles for complete flushing �External tank gauge on the front right hand side �Centralised sump to ensure total emptying �
FaNfan efficiency is essential for a good quality application. maximum output with a turbine as close as possible to the hands and canons.
VINIS and DUO: 450mm fan on the front. 26hp required �VECTIS: 450mm or 560mm fan on the rear. 26hp �or 35hp requiredSteel fan housing for maximum air speed �Fan may be disengaged due to a dog clutch system �Free wheel between the pump and the fan to avoid �overrun vibrationsBelt drive fan with automatic tensioner on the belt: �gas ram keeping the right tension at all timeOil bath bearing gearbox with outside oil gauge giving �durability and easy access for maintenance8 output air manifold with equal distribution �
centralised operating area
induction hopper and can wash (option)
Lav’ton: rotary washing nozzle
gravity or integrated autonet
Rinsingtank
Transfertvalve
Main tank
Electric tractor circuit
EaSy OpEraTINg arEaa water circuit for all uses with a centralised and ergonomic easy operating area.
Accessible suction filter for daily cleaning �Chemical induction and can wash �Variable agitation �Spraying controls �Main tank cleaning with 2 rotary washing nozzles �Ability to clean the boom water circuit without any returns �to the main tank
Options: Gravity Autonet: sequential tank dilution system driven -from the cabIntegrated Autonet: sequential tank dilution through the -water pump and driven from the cab (only for VECTIS)
pUmp aND FILTErSself priming piston diaphragm pump. high and regular flow for good agitation and application.
VINIS & DUO: Piston diaphragm pump PM150 giving �70 ℓ/min and 15 barsVECTIS: Piston diaphragm pump PM190 giving �105 ℓ/min and 15 bars500 micron filling filter �594 micron suction filter with a none return valve: �the filter may be cleaned with a full tank
Option: 365 micron pressure filter
pressure gauge
in cab joystick to manage the sprayer
pneumatic air regulator reguLair
rEgULaTIONregulation and distribution are the main keys for an evenly distributed spray along the boom.
reguLair: regulation by manual pressure adjustment with pneumatic regulator.
A simple and ergonomic control on every sprayer function with joystick:
Section control �Regulation (dependant on equipment and options) �Boom movement (dependant on equipment and options) �
REGULAIR guarantees good pressure stability during spraying and automatically compensates the section cut off without any calibrated return adjustment.
100 mm diameter pressure gauge �Boom sections control by TECNOMA’s solenoid valves �Semi continuous circulation for fast section closing and �openingRegulation returns go to the pump suction for a perfect �control of the tank returns
regulation valve for dpae
vititronic control box for dpae
VITITrONIC DpaE rEgULaTIONRegulation proportional to the forward speed (DPAE). The regulation valve adapts the spray and flow according to the forward speed to apply the same rate anywhere on the vineyard.
How it works:
Rate setting in ℓ/ha �Speed sensor fitted to tractor or sprayer wheel �Pressure sensor on the boom �Flow regulation according to the pressure and the speed �Spraying control box in the cab �Easy adaptation to various plantation widths and heights �20 fields records: surface, volume and distance travelled �
pneumatic 4 finger hand with dcv and monostop
vitisit boom with pneumatic equipment
face by face preciJet equipment
ThE Spraythe right dose in the right place while reducing atmospheric drift.
pneumatic:
Every “gun” is equipped with an fixed internal diffuser in �the centre to ensure an evenly distributed circular spray patternPolyethylene hands and cannons: can be adapted to any �vineyard with a high shock resistance3 dimensional settings for the hands �Monostop: DCV and individual cut off system �
preciJet: application control and drift reduction. a spraying system which allows you to reduce chemical quantities without reducing chemical application to the plant.
Air flow assisted face by face spraying system.
Polyethylene tube: light, robust and shock resistant �Cone shape tube: fluidity through the rows and equal �speed and volume from the top to the bottom of the air output.Retractable attachment with automatic return in case of �collision26 hp turbine: low power and fuel consumption �Linear air flow all the way up: equal application �1250 mm high for standard PreciJet: 4 nozzles / face �with orientation adjustment and height settings MonoStop Nozzle holder with anti-drip DCV �Hollow Cone ceramic nozzles: perfect rate control and �durability
Option: 1 670 mm high for PreciJet with 5 nozzles
narrow equipment
vitifix
Key points:
Equal application and air distribution along the boom �Optimum spray penetration into the canopy �Perfect rate control thanks to ISO nozzles �Air speed control depending on vegetation density �Spray localisation according to vegetation height �Possibility to work without air assistance (usually at the �beginning of the season)Optimized air flow: PreciJet uses low air volume. 450 mm �turbine and 26 hp: low power and fuel consumptionAtmospheric and ground drift reduction: chemical rate �reduction without reducing application to the plant
BOOmSdifferent types of booms and spraying equipment to adapt your sprayer to any vineyard type.
TECNOMA booms are fitted on the turbine housing with either manual or hydraulic height control (dependant on equipment and options).
narrow equipment: pneumatic 4 hands and 4 cannons
Adjustable cannons are fitted on a fixed boom �Compatible with VINIS, DUO and VECTIS �
vitifix: pneumatic 4 hands and 4 cannons
Cannons fitted on a horizontal runner: manual position �settingManual cannon orientation settings �Compatible with VINIS, DUO and VECTIS �
polyethylene tube
with a conic profile giving a uniformed air repartition along
the boom
pneumatic assistance: Linear air flow for good penetration into the vegetation
and canalized spray spectrum.
vitisit
hydrauLic vitimoBiL with preciJet equipment
vitivario vg with preciJet
vitisit: pneumatic 4 hands and 4 cannons
Cannons fitted on a hydraulic horizontal runner: left and �right are independently hydraulically adjustedManual cannon orientation setting �Compatible with VINIS, DUO and VECTIS �
manuaL vitimoBiL: pneumatic 4 hands and 4 cannons
2 manual lateral folding arms with safety system �Cannon position setting along the boom �Manual cannon orientation setting �Compatible with VINIS, DUO and VECTIS �
hydrauLic vitimoBiL:
Pneumatic: 4 hands and 4 cannons �Precijet: 4 PreciJets face by face, sliding along the boom �to spray 2 complete rows from 1,5m to 2,5m plantation width2 hydraulic independent lateral folding arms �Compatible with VINIS, DUO and VECTIS �with pneumatic equipmentCompatible with VINIS and VECTIS with PreciJet �equipment
vitivario and vitivario vg:
Pneumatic: 4 hands and 4 cannons �PreciJet: 4 or 6 PreciJets face by face, sliding along �the boom to spray 2 or 3 rows. From 1,5m to 4,5m plantation width with 4 PreciJets and from 1,5m to 2,5m plantation width with 6 PreciJets2 hydraulic independent lateral folding arms mounted on �a horizontal runner giving hydraulic lateral setting at all timesCompatible with VINIS, DUO and VECTIS with pneumatic �equipmentCompatible with VINIS, DUO and VECTIS with 4 PreciJets �Compatible with VECTIS with 6 PreciJets �
Booms total width unfolded
total width folded
height between
boom and ground
Lifting setting
vitifix 2000 mm 1500 mm on VINIS 1640 mm
400 mm
vitisit ii 3400 mm 2200 mmon VECTIS 1900 mm
400 mm
manuaL vitimoBiL 3720 mm Ø on VINIS
1640 mm400 mm
hydrau-Lic
vitimoBiL3720 mm Ø on VINIS
1640 mm400 mm
vitivario de 5600 to 6550 mm
Ø on VECTIS 1900 mm
400 mm
Booms total width unfolded
total width folded
height between
boom and ground
Lifting setting
vitifix 2000 mm 1500 mm on VINIS 1640 mm
400 mm
vitisit ii 3400 mm 2200 mmon VECTIS 1900 mm
400 mm
manuaL vitimoBiL 3720 mm Ø on VINIS
1640 mm400 mm
hydrau-Lic
vitimoBiL3720 mm Ø on VINIS
1640 mm400 mm
vitivario de 5600 to 6550 mm
Ø on VECTIS 1900 mm
400 mm
description vinis 600 vinis 800 duo 600 duo 800 vectis 800e
vectis 1000e
vectis 1000
vectis 1200
cha
ssis,
turb
ine
and
wat
er c
ircui
t
Chassis Design Turbine boom and pump on the front
Spraying unit (turbine, boom and pump) on the 3 point linkage with
an articulated trailer behind
Pump on the frontTurbine and boom behind
Turbine 450 mm - 26 CV 450 mm - 26 CV - PreciJet 560 mm - 35 CV - Pneumatic
Clutch type Manual clutch
Transmission Oil bath bearing gearbox and automatic tensioner on the belt Oil bath bearing gearbox and automatic tensioner on the beltFree wheel between the pump and the fan
Axle 2 cranked half axles slinding into an axle holder2 longitudinal axle settings
2 cranked half axles slinding into an axle holder4 longitudinal axle settings
Tyres 185/65 R15 185/65 R15 205/70 R15 235/70 R15
Mud guard Ø Serie (depend on configuration)
Drawbar Articulated drawbar 3 point linkage Link arm hitching
Main tank 600 ℓ 800 ℓ 600 ℓ 800 ℓ 800 ℓ 1000 ℓ 1200 ℓ
Remote drain Serie
Lav’Ton 2
Agitators 2 4
Rinsing tank 55 ℓ 70 ℓ 55 ℓ 70 ℓ 85 ℓ 120 ℓ
Hand wash tank 15 ℓ
Pump PM150 de 70 ℓ/min PM190 de 105 ℓ/min
Filtration 500 micron filling filter594 micron suction filter with nne return valve
Regulation REGULAIR, constant pressure regulation
Pressure gauge Ø100 mm
Distribution TECNOMA solenoid valves
Sections 2 setions
Step Ø Serie
Hydraulic lift Serie with PreciJet Ø Serie with PreciJet
Hydraulic Hydraulic command by circuit selection (except VITIFIX and manual VITIMOBIL)
Boom
s
NARROW EqUIPMENT Pneumatic equipment (4 hands et 4 cannons)
VITIFIX Pneumatic equipment (4 hands et 4 cannons)
VITIMOBIL Pneumatic equipment (4 hands et 4 cannons)
VITISIT II Pneumatic equipment (4 hands et 4 cannons)
HYDRAULIC VITIMOBIL Pneumatic equipment or PreciJet 4 faces Pneumatic Pneumatic or PreciJet 4 faces
VITIVARIO Pneumatic equipment or PreciJet 4 faces Pneumatic equipment or PreciJet 4 or 6 faces
Hydraulic lift Serie with PreciJet
Hydraulic control Circuit selection - 2 double acting control valves or 1 double acting and 1 single acting control valves (depend on booms) (No hydraulic control on VITIFIX and manual VITIMOBIL)
opt
ions
Articulated drawbar Ø XStep Ø X Ø
Tyres 26.1200 R12 205/70 R15 26.1200 R12
26.1200 R12 29x12.5x15 235/70 R15
29x12.5x15
Axle Ø Double axle with 165/70 R14Bogie with 6x9x10
Induction hopper XCan wash XSpirovit X
Pressure filter 365 micron pressure filterSections 4 sections instead of 2
Sequential dilution Gravity Autonet Gravity AutonetIntegrated Autonet
Hose reel and hand lance XPressure setting from the cab with REGULAIR X
DPAE regulation VITITRONIC XOther pneumatic equipment X
TELESIT for cannons X
PreciJet length 1670 mm - 5 nozzles instead of 1250 mm - 4 nozzles
VITIMOBIL EXTENSIONS Extension for 4780 mm boom total width Ø Extension for 4780 mm boom total width
Hydraulic lift Hydraulic lift with single acting or double acting control valve from the tractor with pneumatic equipment
ED hydraulic distribution X
TECNOma SErVICEA worldwide network
Genuine parts available on CD and all the NOZAL nozzles range. www.nozal.fr
Dealer stamp
S.A.S. - Capital 1 174 400 euros - R.C.S. EPERNAY B 350 484 309 - 54 rue Marcel PAUL - F - 51206 EPERNAY CEDEX Tél. 33 (0)3 26 51 99 99 - Fax 33 (0)3 26 51 83 51 - Site : www.tecnoma.com - Email : [email protected]
january 2012
H1
L2 L3L1
H1
L2L1
L3
L4
L5
H1
L3 L2L1
vectis vinis
duo
Join us on
http://fr-fr.facebook.com/groupe.tecnoma
L1 total length L2 L3 L4
total widthL5
tank widthh1
tank height tyres
vinis 600 2530 1655 to 1755 875 to 775 1090 990 990 185/65 R15
vinis 800 2680 1760 to 1830 920 to 850 1200 990 990 185/65 R15
duo 600 2990 2340 650 1090 990 990 185/65 R15
duo 800 3140 2490 650 1200 990 990 185/65 R15
vectis 800e 2790 1940 850 1244 1050 1050 185/65 R15
vectis 1000e 2790 1940 850 1257 1090 1050 205/70 R15
vectis 1000 2995 2050 945 1250 1210 1200 235/70 R15
vectis 1200 2995 2050 945 1390 1210 1200 235/70 R15
DImENSIONS