THE COMPANY

Founded in 1983, Micro-Trim, Inc.

has long been known as the

headquarters for the manufacturing

of custom trim kits for the

installation of microwave ovens,

cooktops and thermal ovens.

Micro-Trim employs an in-house

sales staff to work with you on your

special and everyday requirements.

Experienced order personnel assures

you of prompt, on-the-spot telephone

service at all times.

Trim kit manufacturing is our only

business...and we are good at it. Give

us a call to assist you with your next

installation.

Custom trim kits from Micro-Trim

are manufactured for use with most

appliances new and old.

They are fabricated from high

quality aluminum, then color

powder coated or anodized for a fine

f inish. The kit provides an

attractively styled, easily installed

product.

A complete line of kits are available

to fit your personal requirements

whether your project is a simple

appliance change out, a complete

remodel, a new home, or a tract of

new homes.

To compliment your installation, kits

are available in:

CUSTOM KITS

Many new installations

present a need for something

other than a standard trim kit.

Our ability to manufacture

custom kits is unequaled and

custom products make up a

large percentage of our

business. Installations such

as: to cover Custom Kits

existing openings larger or

s m a l l e r t h a n t h e

recommended opening;

THINGS TO REMEMBERWHEN ORDERING:

The following information is required and necessary when ordering a

MICROWAVE OVEN TRIM KIT.

Since microwave ovens vary greatly in size, there may be occasions

where additional measurements may be required on some installations

to insure a properly fitting kit.

For your convenience when ordering, we would be pleased to furnish

you with our easy to use Telephone/Fax Order Planning Form.

We have designed this form with you in mind for fast ordering in a

simple format that you can telephone or fax in with ease!

1. Oven manufacturer’s name.2. Oven model number.3. Existing cabinet cut-out size, if any.4. Will microwave oven be installed over a thermal oven? (If yes, make & model of oven or just oven width is required)

Black White Black White Stainless Steel FinishStainless Steel Finish

QUALITYDETAIL

Matching Width Kits that will match the width of a thermal oven of a

greater width; to enclose both microwave and Full Length Kits

thermal ovens of a smaller width; when replacing a Oven Fillers

thermal oven of a smaller height dimension; when Oven Rings

installing a replacement thermal oven into a wider cut-out dimension;

and when installing a cooktop into an oversized Cooktop Trim Kits

existing countertop opening and many more. The illustrations in this

brochure will help you when ordering a kit from our custom line.

Matching WidthCustom Kit

Used on bi-level installations when the width of the microwave oven is less than that of the thermal oven and matching widths are desired.

MIC

RO

WAVE

TR

IM-K

ITS

MICROWAVETRIM-KITS

Standard KitUsed on most installations where no prior cabinet cut -out exis ts and our recommended cut-out is used.

Limited AreaCustom Kit

Used on installations where the existing opening height is l imited. Not recommended for use with Micro-Convection combo ovens. Other venting should be utilized in all installations.

MIC

RO

WAVE

TR

IM-K

ITS MICROWAVE

TRIM-KITS

Oversized top ventilator strips can be used when a pre-existing cabinet cut-out height is greater than our recommended opening height.

Extra Height TopCustom Kit

Extra Height Top & Bottom Custom Kit

Oversized top and bottom ventilator strips can be used when a pre-existing cabinet cut-out height is greater than our recommended opening height.

For bi-level installations when the microwave oven is a greater width than that of the thermal oven, and a full length one piece trim kit is desired.

Full LengthCustom Kit

OVEN RINGS

OVE

N R

ING

S

Used when an existing cabinet opening is larger than the replacement thermal oven. Oven Rings can be built to a variety of sizes depending on the existing opening. When ordering, please specify make and model number of the thermal oven and the existing cabinet opening. Oven Rings are available in:

Thermal Oven Rings

Black White Stainless Steel Finish

BEFORE AFTER

Color Samples

White Black StainlessSteel

Finish

Used to fill gaps on each side of an over-the-range microwave when the space between the cabinets is too wide. Standard Sizes: Custom sizes are available. Microwave Filler Kits are available in:

Microwave Filler Kits

BEFORE

AFTER

NOTE: Filler Kits must be installed before the microwave.

Black White Stainless Steel

MICROWAVEFILLER KITS

MIC

RO

WAVE

FIL

LE

R K

ITS

A - RequiredB - RequiredC - Required

1. MANUFACTURER’S MAKE

MODEL NUMBER2.

OPENING IN CABINET3. (see drawing - right)

A

C B

Ordering Information:Custom Sizes Available

3” W x 11” D x 15 3/4” H & 6” W x 11” D x 15 3 / 4 ” H

Used when the existing counter top depth is greater than the existing slide-in or drop-in range. Slide-In Range Fillers are available in:

Slide-In Range Fillers

BEFORE

SLIDE-INRANGE FILLERS

SLID

E-IN

RA

NG

E F

ILLE

RS

Ordering Information:

Black White Stainless Steel Finish

AFTER

1. MANUFACTURER’S MAKE

MODEL NUMBER OR WIDTH 2. OF SLIDE-IN RANGE (E)

EXISTING GAP SIZE TO BE FILLED3. (see drawing - right))

OVEN FILLERS

VENTED SOLID

Standard Filler 1 1/6” to 2 3/16” Standard Filler 1 1/6” to 2 3/16”

Extra Height Filler 2 3/8” to 4 5/16” Extra Height Filler 2 3/8” to 4 5/16”

Double Filler 4 3/8” to 8 5/8” Double Filler 4 3/8” to 8 5/8”

Used when the existing opening height is larger than the height of the replacement thermal oven. Filler Strips come in a variety of sizes, from 1 1/16 to 8 5/8 high. Fillers come in solid or vented and are usually placed below the thermal oven. When ordering, please specify solid or vented, width and height of filler needed. Oven Fillers are available in:

Black White Stainless Steel Finish

AFTERBEFORE

OVE

N F

ILLE

RS

Oven Fillers

One-piece seamless kits

Designed to fit almost any countertop opening

Allows a wide variety of cooktop choices

Things to Remember When Ordering

1. MANUFACTURER’S MAKE

MODEL NUMBER2.

EXISTING OPENING IN COUNTERTOP3. (see drawing - right))

COOKTOPTRIM-KITS

CO

OK

TO

P T

RIM

-KIT

S

Note: Cooktop Trim Kits are

cosmetic only and are not designed to support the weight of the cooktop. Some countertop modifications may be necessary for support. Cooktop Trim Kits are available in:

For use when installing almost

any desired cooktop into an

oversized existing countertop

opening. These kits alleviate the

extra expense of re-tiling or

replacing the existing countertop.

Each kit is fabricated out of

sturdy aluminum according to

your specifications.

Black White

Stainless Steel Finish Finished Installation

Trim Kit

A - RequiredB - RequiredC - If AvailableD - If AvailableF - If Available