PUSHIN MOBILE SPLITTER

VARITAIN® PUSHIN ADVANCE

REEFER CONTAINER SOCKET

PUSHIN MOBILE EXTENSION

RoRo Ferries

Container TerminalsContainer Vessels

Shipowners

Founded in 1919 in Hamburg as a manufacturer of ship installation materials, we know the harsh climate on the coast and the challenges to man and material. These extreme conditions have shaped the demands on our products for nearly 100 years. The result is that everything we manufacture is made for the toughest environments.

VARITAIN® PushIn Advance and its friends are made for:

Power supply for reefer containers, thought outside the box.

To maximise on-board power supplies - and shipowners’ flexibility.

25 metres to extend a shipowner’s influence on board.

VARITAIN® PushIn Advance

PushIn Mobile Splitter

PushIn Mobile Extension

Stay on course with our power supply solutions.

To deliver goods reliably, safely and within the scheduled time, is the highest priority for every shipowner. It is also the responsibility for shipyards and in turn, us at WISKA®. On the following pages we are pleased to introduce solutions that guarantee our part in delivering this promise.

PushIn Mobile Splitter

For a shipowner it is of great benefit to stay flexible to the demands of the market. With our PushIn Mobile Splitter, we provide an easy-to-use, reliable and safe solution for greater flexibility. All a crew member has to do is connect the PushIn Mobile Splitter with an existing socket to simply double the capacity of one reefer container socket. So if a shipowner's client needs more reefer container sockets, this product helps to easily increase capacity.

One easy way to double.

Be prepared for being unprepared.

A design with a purpose.

1

Simply double the amount of reefer container sockets

without touching the electrical infrastructure of the

vessel.

Seal good: Feel good

Like all VARITAIN® friends, the PushIn Mobile

Splitter also uses our WISKA® Factory Seal, saying

there is no need to open the casing when con-

necting to reefers.

Made for toughest conditions

The weather conditions on a container vessel might

be tough. The halogen-free cable which comes with

the PushIn Mobile Splitter is proof of its robust-

ness. Supported by a high-quality WISKA® cable

gland with extra strain relief, this cable is prepared

to do its duty with good resistance to UV rays, sea

water, oil and fuel.

Created to be easy

Save time and money in complex mounting proce-

dures. Easy to carry, its handle allows you to move

the PushIn Mobile Splitter where you need to. As we

do with all our products, we aim to make your work

easier and more efficient.

DNV GL approved.

Technical data

Type: 2 sockets 32 A, 3 poles +E, 3 h acc. to IEC 60309, both individually fused with a MCCB 25 kA and 20 A

Operating voltage: 440 V

Frequency: 50 / 60 Hz

Protection class: IP66 / 67

Temperature range: – 25 °C - 45 °C

Material: Casing of 1.4301 stainless steel, both sides powder-coated, colour traffic white RAL 9016

Scope of delivery:1 plug 32 A, 3 poles +E, 3 h acc. to IEC 60309, cable 6 mm², 2 m, CH-N1BQ-F, WISKA® cable gland with high strain relief, carrier handle, easy mountable fixture set 1

2

4

We listened to your demands. This is our solution.

2

A relocated easy-to-access power terminal, high protection class, LED supported PushIn technology, a factory seal to provide maximum service support and much more: The VARITAIN® PushIn Advance is everything shipyards asked for – to give shipowners what they demand.

VARITAIN® PushIn Advance

The new WISKA® power port, outside the box.

A shipyard’s benefits:

Locating the new WISKA® power port on the outside of

the box was one move that gave two big advantages:

It maximises the comfort of installation, as the

main power terminal is easy to access, and it

minimises the risk of damage, as the casing lid can

stay closed the whole time.

Less space needed

We understand how valuable space on a container

vessel is. By relocating the power terminal we managed

to create a 40 % smaller casing. Which means less

use of stainless steel in production and more efficiency

in installation.

EMC gland accessories

Our EMC solution assures a 100 % effective shield

and significantly easier installation.

LED supported security

Every time you plug in, an LED signal simply shows

if the power supply is on.

Safety first thanks to PushIn technology

Thanks to the DNV GL approved PushIn technology

you only need to plug in to switch power on. The

moment you pull the plug out, the power supply is

automatically switched off.

Technical data

Type: 1 to 11 sockets 32 A, 3 poles +E, 3 h acc. to IEC 60309, indivi-dually fused with a MCCB 25 kA or 10 kA

Operating voltage: 440 V

Frequency: 50 / 60 Hz

Protection class: IP66 / 67

Temperature range: – 25 °C - 45 °C

Material: Casing of 1.4301 stainless steel, both sides powder-coated, colour traffic white RAL 9016

1

2

4

Maximum service with greater usability.

A shipowner's benefits:

Extend your power, reduce your effort.

Thanks to relocating the power terminal outside the

box, users no longer have to open the lid for connec-

tion. Our WISKA® Factory Seal offers you peace of

mind and security that access inside the casing is

untouched.

“Prevention is always better than cure” is a saying

that also applies to electrical ship installations. For

a well structured planning, the looper connects the

power terminals of two VARITAIN® PushIn Advance

with each other. In this way, it works as a cable

economiser that helps shipyards to provide the

most efficient electrical installation.

Patent pending.

DNV GL approval in progress.

3

FOAMEDFoamed sealing

Following the same principle of every PushIn product,

the box includes a high-class foamed sealing which

stands out from the seamless and captive cast for an

extended lifetime.

Venting technology

The WISKA® VentPLUG pressure compensation unit

ensures permanent pressure equalisation between

the interior and the exterior to minimise the risk of

condensation water (optional).

High protection

With an IP66 / 67 approved protection level, every

component of the socket is ready to resist tough

environmental conditions.

3

2

PushIn Mobile Extension

The best way to stand out on the market is by responding fast and safely to any demand. One answer to that demand is our PushIn Mobile Extension. It makes the organisation of the ship simpler and more flexible, by giving the shipowner the possibility of placing the containers far away from the next socket.

4

DNV GL approval in progress.

25 metres of toughness.

Portable security.

25 metres of cable maximise the reach of any

socket on the ship. Its thick exterior coating makes

this cable resistant enough to ensure trouble-free

performance in the toughest conditions.

In safe hands

The PushIn Mobile Extension keeps the crew safe

and comfortable. Thanks to the DNV GL approved

PushIn technology, voltage is supplied after you

plug into the reefer container socket. Its portable

design with a handle makes it easy to transport

throughout the ship.

A good seal to feel better

Our Factory Seal also extends to the PushIn Mobile

Extension, reminding crew members to leave the

box closed to prevent damages.

When the market asks, we answer.

Technical data

Type: 1 socket 32 A, 3 poles +E, 3 h acc. to IEC 60309, fused with a MCCB 25 kA

Operating voltage: 440 V

Frequency: 50 / 60 Hz

Protection class: IP66 / 67

Temperature range: – 25 °C - 45 °C

Material: Casing of 1.4301 stainless steel, both sides powder-coated, colour traffic white RAL 9016

Scope of delivery:1 plug 32 A, 3 poles +E, 3 h acc. to IEC 60309, cable 6 mm2, 25 m, CH-N1BQ-F, WISKA® cable gland with high strain relief, carrier handle

1

2

4

LED LIGHTING CCTV CAMERA SOLUTIONS

WISKA Hoppmann GmbHKisdorfer Weg 28 24568 Kaltenkirchen Germany

The new VARITAIN® and friends 09/2017 ® Registered WISKA brands are protected by trademark law in several countries.

+49-4191-508-0 +49-4191-508-129

contact@wiska.de www.wiska.com

We are one of the world‘s leading manufacturers of electrical equipment, maritime lighting solutions, and CCTV camera surveillance for trade, industry and shipbuilding. Founded in 1919, today our family-owned company employs over 260 people worldwide. We operate our own research and development facilities and production plants at our headquarters in Germany and have a global network of representatives and subsidiaries who ensure a quick and effective on-site customer service for you.

About WISKA®

Your expert for good times and quality manufacturing.All products can be found at www.wiska.com