Variable Speed 20 Single and Multi-spindle, Belt Drive ... · • Spindle reversing switch • Automatic tool ejector • Emergency STOP • High/low speed range selector • Drill

� Two Speed Variable Speeds 150-2000rpm� Variable Speeds 200-1300rpm� Variable Speeds 300-2000rpm

Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

www.clausing-industrial.com

Clausing Industrial, Inc.

Clausing 20" Drill PressesInfinitely Variable Speed Countershaft Drive...Dial to the best rpm for the tool and material while the job is running, with a Clausing Two Speed Variable Speed Drill Press.

� 150 to 2000 rpm... speeds to drill large holes, small holes to spot face, counterbore and ream.

� A flip of the switch changes from low range to high range, perfect for production applications with quick change tooling.� Greater capacity, too, with Clausing Two Speed, production rated 1" in cast iron, 3/4" in steel with optional power feed.

Handle more jobs ... better, faster with a Clausing 20" Two Speed drill press.

More features for superior performance...� Heavy-duty precision head... all bearing surfaces are precision bored simultaneously for exact alignment. Eight ball bearings support the drive and spindle, lower spindle bearing has a double row to absorb both radial and thrust loads.� 3 MT spindle... with 6-1/2" travel, 2-1/2" diameter quill and micrometer depth stop.� 4" column with 3/16" thick wall for great rigidity and accuracy.� Precision ground 22" x 19" oil through table, handles large parts and fixtures.

Clausing Drills areequipped

with a Spindle Guard that locks in an upright position, away

from spindle nose, for easy tool changes.

Powerful Countershaft Drive

� Three V-belts and a cog belt transmit positive power to the spindle.

Clausing’s heavy-duty drive delivers full power tospindle at all speeds.

Style AFloor Drill with 22” x 19.5” (559 x 495mm)Table, 66" (1676mm)column standard and 1/2"cored T-slots on 9" centers for table and base

Style BHead & Column Assembly and 20-501 TableAssembly

**Style BHead & Column

Assembly, 43" (1092mm)

Column Standard

Infinitely Variable Speed Countershaft Drive Style A Style BMotor Floor Drill Head & ColumnFurnished 22" x 19" Table Assembly

Two Speed Infinitely Variable Speeds: 150-2000 rpm 1-1/2 - 3/4 Hp 2-speed, 3-phase, 220v* 2276 2286-3002-speed, 3-phase, 440v* 2277 2287-300

Infinitely Variable Speeds: 200-1300 rpm 1-1/2 Hp11⁄2 Hp, 3-ph, 1140 rpm 2275 2285-300

Infinitely Variable Speeds: 300-2000 rpm 1-1/2 Hp11⁄2 Hp, 1-ph, 1725 rpm 2272 2282-30011⁄2 Hp, 3-ph, 1725 rpm 2274 2284-300

*Motor, 11⁄2-3⁄4 hp 1800/900 rpm, 60hz. SPECIFY VOLTAGE... When voltage is not specified,motor will be wired on lower voltage. Motors are ball bearing. 3-phase single speed motorsare 208/220/440v, 60hz. Single-phase motors are capacitor-start, 115/230v, 60hz.

Capacity, hand feed 1.25" (31.75mm) dia. Production rated, with optional power feed, 11/2 hp motor 1" (25.4mm) in cast iron 3/4" (19mm) in mild steelDrill to center of circle 20" (508mm) dia.Spindle nose No. 3MT, 1.74" (44.2mm) ODSpindle travel 6.5" (165mm)Column ground steel, 4" (102mm) dia., 3/8" (9.5mm) thick wallQuill (ground steel) 2.5" (63.5mm) dia.Quill return spring, capacity 40 lbs (18kg)TABLE, DRILL PRESS Style A Working surface 22" x 19.5" (559 x 495mm) Table slots two, 15.5" (394mm) long, for .5" (12.7mm) T-bolt Table travel, one setting 20" (508mm) Spindle to table, maximum 33.125" (841mm)BASE, DRILL PRESS Style A Working surface, ground 15.5" x 13" (394 x 330mm) Base T-slots two, 13" (330mm) long, for .5" T-boltSpindle to Base, maximum 43.375" (1102mm)

DRILL PRESS Style B Column bracket to center of spindle 9.25" (235mm) Column to center of spindle 10" (254mm) Spindle to table, max. distance 25.437" (646mm) Column length 43" (1092mm) Min. center to center distance 20" (508mm)Motor ... NEMA Frame Sizes 182 and 184Shipping weights, approximate, with motors Drill press Style A 630 lbs. (286kg) Drill press Style B 390 lbs. (177kg)

Specifications:

FLOOR MODELS FURNISHED with: No. 3MT spindle; table elevating mechanism; switch; belt guard; spindle guard. Motors and switches are installed and wired, ready to connect to power.

Overall Dimensions Width Depth Height

Drill press Style A 22" (559mm) 36" (914mm) 69" (1753mm)Drill Press Style B 20" (508mm) 3.25" (870mm) 51.625" (1311mm)

Optional Electrical Equipment*For Factory Installation Only NOTE: Magnetic starters protect motor against overload, low andno voltage-Thermal Overload Unit NOT required.

For Single Speed Motor No. 2371 MAGNETIC STARTER.*Protects motor against overload, low and no voltage. Motor will notautomat ically restart when power is restored. Transformer provides110v at start/stop push button. 6 lbs.No. 2371-15 MAGNETIC STARTER for 3-phase. Includes disconnectswitch and 110 volt push-buttons. No. 2377 REVERSING DRUM SWITCH for 1 & 3-phase.* Protectsmotor against overload, low and no voltage. Motor will not automatically restart when power is restored. Transformer provides110v at start/stop push button switch. 6 lbs.

For 2-Speed MotorNo. 2375 MAGNETIC STARTER and REVERSING DRUM SWITCH,with reverse on low speed. * Protects motor against overload, lowand no voltage. Motor will not automatically restart when power isrestored. Transformer provides 110v at start/stop push buttonswitch. 6 lbs.*Controls for field installation, and for single phase ... price on application.

Design and specifications are subject to change without notice.

**Head and Column Models Furnished with: No. 3MT spindle, head elevating mechanism, column, mounting flange, switch and belt guard.Motor and switches are installed and wired, ready to connect to power.

Clausing 20" (508mm) Multiple Spindle Drill PressesClausing multiple spindle drills can be custom built with up to four 20" heads. When ordering a multiple spindle drillpress use the table model number below, plus the appropriate head and column assemble for the corresponding number of heads.Mix and match any number of drill heads as your requirements demand. Example: If you wish to have a 3 spindledrill press with three-20" heads you would order (1) 20-503 table assembly and (3) 2286-300 20" head assemblies. Tell us the order to mount the heads and you have the 3-spindle drill you require.If you have a special request, contact us for a quotation. *Special orders priced on application.

80"

85.5"

20"10"

25.5"

24"

(2032mm)

(2172mm)

(508mm)(610mm)

(648mm)

One piece table, two legs furnished

20-504 • 4-Spindle

80"

85.5"

27"13" (330mm) (686mm)

(2032mm)

(2172mm)


20-503 • 3-Spindle

10" 10"

40"

20"

45.5"

(508mm) (254mm)(254mm)

(1016mm)

(1156mm)

25.5"

24"(610mm)

(648mm)


20-502 • 2-Spindle

40"

20"

45.5"

20"(508mm) (508mm)

(1016mm)

(1156mm)


20-501 • 1-Spindle381/4"

34"

91/4"10"9"257/16"

MAX.

263/16"

6"

41/2"

291/2"34"

855/8"MAX.

243/4"

(1) 2286-300Head & Column Assembly and

20-501 45.5" x 29.5" (1156 x 750mm)Table with Legs

(4) 2286-300Head & Column Assembly and20-504 85.5" x 29.5" (2172 x 750mm)Table with Legs

Drill Chuck and Arbor

No. 1897 Key-Type Chuck. Takes 3⁄16" (4.8mm) to 3⁄4" (19mm)drills. Adapts to 3JT spindle with No. 1898 arbor. 4 lbs. (1.8kg) No. 1898 Arbor. Adapts No. 1897 to 3JT spindle. 1 lb. (.5kg)

Mesh GuardNo. SK-208Top Mesh Belt Guard

Drill Press LampNo. 7022 Lamp. Cool burn-proof shade, aluminum reflector, switch, 19" (483mm) flexible arm, magneticbase, 6' (1.5m) cord and plug.

Clausing 20" (508mm) Drill Accessories CoolantSystemNo. 7044 CoolantSystem. 5 gallon capacity, 110 volt, 60cycle single-phasemotor, for single spindledrills. Flexible nozzle with regulator valve, plastichose, clamps, fittings,cord and plug. 18 lbs.

No. 7044-2 CoolantSystem. For two (2) spindle drills. 5 gallon capacity, 110 volt, 60 cycle single-phase motor. Complete with all valves, hose, fittings, cord and plug.No. 7044-3 Coolant System. For three (3) spindle drills. Like No. 7044-2 except arranged for 3 spindles.No. 7044-4 Coolant System. For four (4) spindle drills. Like No. 2044-3 except arranged for 4 spindles.v

ColumnsNo. 2294-AMT 66" (1676mm) Column in lieu of 43" (1092mm) Column 78 lbs. (35kg)

No. 2349-AMT 90" (2286mm) Column in lieu of 66" (1676mm) Column 107 lbs. (49kg)

Electric Foot ControlNo. 302 Electric Foot Control

No. 302R1 Electric Foot Control with reversing drumswitch for single speed drill

No. 302R2 Electric Foot Controlwith reversing drum switch fortwo speed drills Start and stopdrill from foot pedal

Programmable Macro-Driller Power Feed

No. 2215-1The Programmable Macro-Driller can be installed on anymodel of Clausing 20" drill press, either at time of purchaseor as a retrofit. It allows you to automate hole drilling and ismost effective on deep hole ‘Peck’ drilling. Peck drilling isused to prevent shavings from tangling with the drill bit andbreaking it. The up and down motion of ‘peck drilling’ allowsthe drill to go slightly deeper into the material then withdrawing to pull the chips out of the hole.The Programmable Macro-Driller is easy to program byusing the keypad.

Programmable Macro-Driller SpecificationQuill Travel: 6.4" (62mm)

Feedrate Range: 0.01 - 60 ipm (0.25 - 1500mm/min)Peck Steps: 0.001" - 6.4" (0.02 - 162mm)

Maximum Pecks per Hole: 1400Accurate Hole Depth: ±0.001" (0.02mm)Maximum Quill Force: 1250 lbs. (568 kg)

LED Numerals: 5/8" (15.9mm) highControl Power: 220/230 volt, 50/60 Hz

Single or Three PhaseMax. Drilling Capacity: 1" (25.4mm) in cast iron

3/4" (19mm) in mild steel

For detailed catalogs of the full line of Clausing Machine Tools visit our Web Site:

www.clausing-industrial.comor e-mail us and request an electronic (pdf) catalog at:

[email protected]

Your Authorized Clausing Precision Machine Tools Distributor

Issued 3-12

Clausing Industrial, Inc.1819 North Pitcher StreetKalamazoo, Michigan 49007-1886Phone: 269-345-7155 Fax: 269-345-5945Information: [email protected]

Call Toll Free: 800-323-0972or visit our website


Clausing Precision Lathes� Clausing/Colchester Geared Head Lathes� Clausing/Colchester Professional V.S. Lathes� Clausing/Metosa Geared Head & V.S. Lathes� Clausing/Metosa CNC Lathes � Clausing Large Swing Standard and CNC Lathes

Clausing Precision Mills� Clausing Bed Mills� Clausing CNC Bed Mills� Clausing Knee Mills� Clausing EVS Knee Mills� Clausing Universal Mills

Clausing Precision Grinders� Clausing Manual Grinders� Clausing 2 Axes Hydraulic Grinders� Clausing 3 Axes Hydraulic Grinders� Clausing ASDlll Automatic Grinders

Clausing Precision Drills� Clausing Belt-drive Drills� Clausing Geared-head Drills� Clausing Radial Drills

Clausing Precision Cutting Machines� Clausing/Kalamazoo Horizontal Bandsaws� Clausing/Kalamazoo Vertical Bandsaws� Clausing/Kalamazoo Cold Saws

Your Single Source for Machine Tools

SeriesTGeared-drive Round-column DrillsA heavy-duty Industrial Drilling Machine, designed for easy operation with manual feed

Standard Features and Equipment:• Drilling capacity in steel: 1" (25mm) maximum• Drilling capacity in cast iron: 1.18" (30mm) maximum• Tapping capacity in steel: .71" (18mm) maximum• Tapping capacity in cast iron: .87" (22mm) maximum• Depth scale and adjustable depth stop• “RS” models are equipped with automatic feed reversing

system for tapping• Thermomagnetic switch • Spindle reversing switch • Automatic tool ejector • Emergency STOP • High/low speed range selector• Drill guard with microswitch

TL25

Controls mounted on the frontof the headstock for operatorconvenience for fast and easyspeed selection

Page 2

TM25 TS25

Optional MCC-KT13.8" x 10.8 crossslide table

Ibarmia Drill Catalog 8-10 9/21/10 12:25 PM Page 2

Capacities, Specifications and Dimensions

Standard motor: 1800/3600 rpmSpindle speeds (rpm)90-192-300-504-612-1020-1740-3360

A

D H

G

FE

C

B

A1

A

D H

I

GF

E

J

B

A1

A

D H

I

GF

E

J

B

Page 3

Optional PKB

cabinets

Models TS18 TM18 TL18 TS25 TM25 TL25Auto feed reversing “RS” Models TS25RS TM25RS TL25RS

Capacities:Maximum drilling capacity in steel .71" (18mm) .71" (18mm) .71" (18mm) 1" (25mm) 1" (25mm) 1" (25mm)

Maximum drilling capacity in cast iron 1" (25mm) 1" (25mm) 1" (25mm) 1.18" (30mm) 1.18" (30mm) 1.18" (30mm)

Maximum tapping capacity in steel .55" (14mm) .55" (14mm) .55" (14mm) .71" (18mm) .71" (18mm) .71" (18mm)

Maximum tapping capacity in cast iron .71" (18mm) .71" (18mm) .71" (18mm) .87" (22mm) .87" (22mm) .87" (22mm)

Specifications:Spindle taper 3MT 3MT 3MT 3MT 3MT 3MTQuill diameter 2.44" (62mm) 2.44" (62mm) 2.44" (62mm) 2.44" (62mm) 2.44" (62mm) 2.44" (62mm)

Spindle travel (drilling depth) 4.72" (120mm) 4.72" (120mm) 4.72" (120mm) 4.72" (120mm) 4.72" (120mm) 4.72" (120mm)

Main motor power .75/1.1 Hp (.55/.80 Kw) 1/1.5 Hp (.73/1.1 Kw)

No. of speeds (see speed charts) 8 8 8 8 8 8

Dimensions and WeightsHeight (A) 47.6" (1210mm) 48.4" (1230mm) 75.8" (1925mm) 47.6" (1210mm) 48.4" (1230mm) 75.8" (1925mm)

Height (A1) 79.1" (2010mm) 79.9" (2030mm) - 79.1" (2010mm) 79.9" (2030mm) -Base: length x width (B) 22" x 15" (560x380mm) 22" x 15" (560x380mm) 24" x 15" (600x380mm) 22" x 15" (560x380mm) 22" x 15" (560x380mm) 24" x 15" (600x380mm)

Base to spindle (C) See (E) 20.9" (530mm) 47.6"(1210mm) See (E) 20.9" (530mm) 47.6" (1210mm)

Spindle center to column (D) 9.84" (250mm) 9.84"( 250mm) 9.84" (250mm) 9.84" (250mm) 9.84" (250mm) 9.84" (250mm)

Spindle to Table (E)Minimum 4.33" (110mm) 1.18" (30mm) 4.13" (105mm) 4.33" (110mm) 1.18" (30mm) 4.13" (105mm)

Maximum 19.7" (500mm) 12.6" (320mm) 25.2" (640mm) 19.7" (500mm) 12.6" (320mm) 25.2" (640mm)

Worktable: length x width (F) - 10.6" x 11.8" (270 x 300mm) - 10.6" x 11.8" (270 x 300mm)

Base height (G) 3.1" (80mm) 3.1" (80mm) 3.7" (95mm) 3.1" (80mm) 3.1" (80mm) 3.7" (95mm)

Column diameter (H) 3.94" (100mm) 3.94" (100mm) 3.94" (100mm) 3.94" (100mm) 3.94" (100mm) 3.94" (100mm)

Floor to top of base (I) 34.6" (880mm) 34.6" (880mm) - 34.6" (880mm) 34.6" (880mm) -Cabinet height (J) 31.5" (800mm) 31.5" (800mm) - 31.5" (800mm) 31.5" (800mm) -Net weight 298 lbs (135kg) 364 lbs (165kg) 408 lbs (185kg) 298 lbs (135kg) 364 lbs (165kg) 408 lbs (185kg)

Shipping weight 353 lbs (160kg) 419 lbs( 419kg) 496 lbs (225kg) 353 lbs (160kg) 419 lbs (419kg) 496 lbs (225kg)

Shipping dimension (length x width x height) 20" x 32" x 55" 20" x 32" x 55" 20" x 36" x 75" 20" x 32" x 55" 20" x 32" x 55" 20" x 36" x 75"(.5 x .8 x 1.4m) (.5 x .8 x 1.4m) (.5 x .9 x 2.1m) (.5 x .8 x 1.4m) (.5 x .8 x 1.4m) (.5 x .9 x 2.1m)

Ibarmia Drill Catalog 8-10 9/21/10 12:26 PM Page 3

Clausing Radial Drills Models: CL920AFeatures and Standard Equipment:l Limit switch l High speed gears are made of Nickel-Chrome Steel

and are heat-treated and ground for durabilityl Powerful 2 Hp spindle drive motor for heavy-duty

cuttingl Extra auxiliary dial for spindle feed depth indication,

allows review of spindle feed depth, .0394" to 7.874"l Special spindle balance mechanism, superior to

traditional balance mechanism and extends Balance Spring life

l Coolant systeml Low volt and overload protectionl CSA Electrics Standard l Tool kit and manuals

Model CL920AWorking Area:Column Sleeve Dia. (E) 8.28" (210mm)Column Face to Spindle Center

Maximum (D+C) 37.4" (950mm)Minimum (D) 8.7" (220mm)

Spindle Head Travel (C) 28.7" (730mm)Base Surface to Spindle End

Maximum (A) 47.6" (1210mm)Minimum (B) 13.8" (350mm)

Arm Vertical Travel (A-B) 25.2" (640mm)Arm Rotation (Right & Left) 180°Baseplate Working Surface 35.5" x 25.3" (902x643mm)Box Table Area

Length (L) 23.6" (600mm)Width (K) 17.5" (445mm)Height (H) 15" (380mm)

Base DimensionsFloor Area (R x S) 49.6" x 25.2" (1260x640mm)Height (Q) 6.5" (160mm)

Drill Head:Spindle Taper 4MTSpindle Stroke 8.66" (220mm)Quill Diameter 2.95" (75mm)Number of Spindle Speeds 6Spindle Speeds (rpm) 88, 154, 282, 455, 796, 1500 Number of Feeds 3Spindle Feed Rate (in/rev.) 0.002"/0.0035"/0.006"

(mm/rev.) .05mm/.09mm/.15mm)Spindle Drive Motor 2 hp (1.5 Kw)Elevating Motor 1 hp (.75 Kw)Coolant Pump Motor 1/8 hp (.10 Kw)

Dimensions and Weights:Max. Machine Height (F) 91.3" (2320mm)Base and Column Height (G) 79.1" (2010mm)Shipping Dim.

Length 71.1" (1806mm)Width 32.5" (826mm)Height 86.2" (2190mm)

Net Weight 2,756 lbs. (1250kg)Shipping Weight 3,086 lbs. (1400kg)

Specifications:

A

E

D

F

Q

C

B

R x S

G

K

L

H

Dimensions:

4

Model CL920A

Capacity:Drilling

In Steel 1.26" (32mm)In Cast Iron 2" (50mm)

TappingIn Steel 1" (25mm)In Cast Iron 1.26" (32mm)

BoringIn Steel 2.75" (70mm)In Cast Iron 4.06" (105mm)

Capacities:

Models with Autofeed Reversing Systemsfor Tapping Standard

A Line of Precision, High PerformanceGeared-drive Prismatic-column Drills


SeriesF Geared-drive Prismatic-column Drills

With Electromagnetic Clutch Automatic Feed Control

Rotating machine head, rotates45° left or right, for a wide rangeof machining applications.

Standard Features and Equipment:• Drilling capacity in steel: 1.38" (35mm) maximum• Drilling capacity in cast iron: 1.57" (40mm) maximum• Milling capacity in steel: 1.80" (45mm) maximum• Milling capacity in cast iron: 3.20" (80mm) maximum• Tapping capacity in steel: 1.18" (30mm) maximum• Tapping capacity in cast iron: 1.30" (33mm) maximum• 18 spindle speeds• Automatic feed reversing system for tapping

on “RS” models• Adjustable vertical position of head by geared-motor• Head rotates 45° left or right of center• Large worktable with 3 T-slots• Hardened and ground high quality steel gears• Gear box lubrication by automatic pump• Guide ways lubricated by manual pump• Speed plate and selecting levers on front of head• High/low speed range selector• Coolant tank and pump in machine base• Co-ordinate cross slide table• Automatic feed and cut-off by electromagnetic clutch• Work light • Front hand wheel for fine feed work• Depth scale and adjustable depth stop• Built-in low voltage electrical equipment in column rear• Emergency STOP• Spindle turn selection switch• Drill guard with microswitch

The F series Industrial Drilling Machine isequipped with standard features that allow awide range of drilling/milling applications. Therotating head, rotates 45° left or right, giveseven more machining flexibility.

Optional Equipment:• 50% lower feed range• Digital read-out system for table• Electronic SERVO feed unit X/Y axes• Quick tool change nut for ISO-30• Cross slide table• Cycle start foot pedal • Foot pedal for reversing• Worklight with magnetic base• Coolant system with independent container

BF-35

Page 2

Standard Models BF-35Auto feed reversing for tapping Models BF-35RS

Capacities:

Maximum drilling capacity in steel 1.38" (35mm)

Maximum drilling capacity in cast iron 1.57" (40mm)

Maximum milling capacity in steel 1.80" (45mm)

Maximum milling capacity in cast iron 3.20" (80mm)

Maximum tapping capacity in steel 1.18" (30mm)

Maximum tapping capacity in cast iron 1.3" (33mm)

Specifications:

Spindle taper ISO-30

Optional spindle taper (on request) 4MT

Quill diameter 2.95" (75mm)

Spindle travel (drilling depth) 7.87" (200mm)

Main motor power 1.5/2 Hp (1.1/1.5Kw)

Coolant pump motor power .12 Hp (.09Kw)

Head geared-motor power .1 Hp (.07Kw)

Number of speed (see speed charts) 18

Number of automatic feeds 3

Auto feed range in./rev. (mm/rev.) .0039/.0079/.118 (.1/.2/.3)

Dimensions and Weights

Height (A) 81.9" (2130mm)

Overall length (B) 57.1" (1450mm

Spindle to table (C)

Minimum 0"

Maximum 23.23" (590mm

Spindle center to column (D) 15.08" (383mm)

Maximum head height (E) 94.5" (2400mm)

Worktable width (F) 14.17" (360mm)

Worktable height (G) 35.43" (900mm)

Worktable length (H) 47.24" (1200mm)

Base width (I) 29.53" (750mm)

Overall width (J) 61.81" (1570mm)

X travel 27.56" (700mm)

Y travel 14.17" (360mm)

Net weight 2,756 lbs (1250Kg)

Shipping weight 3,197 lbs (1450Kg)

Shipping dimension (length x width x height) 67" x 67" x 95" (1.7x1.7x2.4m)


Y

B

D

F

G

E CA

I

H

X

J

Standard motor: 1800/3600 rpmModel Spindle speeds (rpm)BF-35 95-135-190-267-380-534-750-1065-1500

190-270-380-534-760-1070-1500-2130-3000

“RS” models are equipped with automatic feed reversing system for tapping.

Page 3

SeriesPGeared-drive Prismatic-column Drills

With Electromagnetic Clutch Automatic Feed Control

View of left side of machine head showinglifting equipment, stroke microswitches andautomatic lubrication pump for the guides.

Standard Features and Equipment:• Drilling capacity in steel: 2.75" (70mm) maximum• Drilling capacity in cast iron: 3.14" (80mm) maximum• Tapping capacity in steel: 2.51" (64mm) maximum• Tapping capacity in cast iron: 2.68" (68mm) maximum• Automatic feed reversing system for tapping

on “RS” models• Adjustable vertical position of head by geared-motor• Large worktable with 3 T-slots• Hardened and ground high quality steel gears• Gear box lubrication by automatic pump• Guide ways lubricated by manual pump• Speed plate and selecting levers on front of head• Coolant tank and pump in machine base• Automatic feed and cut-off by electromagnetic clutch• Work light • Front hand wheel for fine feed work• Depth scale and adjustable depth stop• Built-in low voltage electrical equipment in column rear• Emergency STOP• Automatic tool ejector• Forward and reverse turn push buttons • Drill guard with microswitch

The P series Industrial Drilling Machines are builtwith an extra heavy-duty base and worktable tohandle large and heavy work pieces.

Optional Equipment:• Automatic pitch control tapping with single speed brake motor• Automatic pitch control tapping with pneumatic rapid approach• Master guide spindle and nut set for automatic pitch

control tapping• Pneumatic counterbalance with rapid approach and retract• Pneumatic counterbalance with rapid approach and retract

for tube and and profile drilling• Pneumatic counterbalance with rapid approach and retract

with pitch controlled tapping• 50% lower feed range • Mechanical spotface device• Pneumatic counterbalance • Multi-spindle head guide rod• Union, dragging cone and assembly for multi-spindle head• START-STOP and emergency STOP pendent control• Pendant control panel with all functions • Cross slide table• ISO-40 spindle with quick change nut (models BP-40,50,70)• ISO-50 spindle with quick change nut (models BP-70 only)

BP-70L

All SeriesP modelsare supplied with

side protectionpanels with front

doors except thoseequipped with a

cross table.

Page 4

Standard Models BP-40 BP-50/50L BP-70/70LAuto feed reversing for tapping Models BP-40RS BP-50RS/50LRS BP-70RS/70LRS

Capacities:Maximum drilling capacity in steel 1.57" (40mm) 1.97" (50mm) 2.76" (70mm)

Maximum drilling capacity in cast iron 1.97" (50mm) 2.36" (60mm) 3.14" (80mm)

Maximum tapping capacity in steel 1.30" (33mm) 1.65" (42mm) 2.51" (64mm)

Maximum tapping capacity in cast iron 1.57" (40mm) 1.97" (50mm) 2.68" (68mm)

Specifications:Spindle taper 4MT 4MT 5MTSpindle taper (optional upon request) ISO-30 ISO-40 ISO-40/50Quill diameter 2.95" (75mm) 3.46" (88mm) 3.54" (90mm)

Spindle travel (drilling depth) 7.87" (200mm) 9.06" (230mm) 10.24" (260mm)

Main motor power 3 Hp (2.2Kw) 5.5 Hp (4Kw) 10 Hp (7.3Kw)

Coolant pump motor power .12 Hp (.09Kw) .12 Hp (.09Kw) .12 Hp (.09Kw)

Head geared-motor power 1 Hp (.7Kw) 1.5 Hp (1.1Kw) 1.5 Hp (1.1Kw)

Number of speed (see speed charts) 9 9 12Number of automatic feeds 3 6 6Auto feed range in./rev. (mm/rev) .0039/.0079/.0118 (.1/.2/.3) .0039/.0079/.118/.157/.197/.236 (.1/.2/.3/.4/.5/.6)

Dimensions and WeightsHeight (A) 85.8" (2180mm) 97.2"/122.8" (2470/3120mm) 103.1"/122.8" (2620/3120mm)

Base length (B) 52" (1320mm) 55.9"/58.6" (1420/1490mm) 62.6"/64.6" (1590/1640mm)

Spindle to Table (C)Minimum 7.09" (180mm) 11.02"/25.6" (280/650mm) 9.06"/23.6" (230/6000mm)

Maximum 33.07" (840mm) 39.4"/64.9" (1000/1650mm) 43.3"/63" (1100/1600mm)

Spindle center to column (D) 15.75" (400mm) 18.7" (475mm) 20.67" (525mm)

Maximum head height (E) 96.5" (2550mm) 108.3"/133.9" (2750/3400mm) 120.1"/139.8" (3050/3550mm)

Worktable width (F) 19.69" (500mm) 23.62" (600mm) 27.56" (700mm)

Table height (G) 27.56" (700mm) 27.56" (700mm) 27.56" (700mm)

Worktable length (H) 23.62" (600mm) 27.56" (700mm) 35.43" (900mm)

Overall width (I) 35.43" (900mm) 39.37" (100mm) 47.24" (1200mm)

Net weight 2,425 lbs (1100Kg) 3,086/3,527 lbs (1400/1600Kg) 4,078/4,629 lbs (1850/2100Kg)

Shipping weight 2,866 lbs (1300Kg) 3,527/4,078 lbs (1600/1850Kg) 4,630/5,291 lbs (2100/2400Kg)

Shipping dimension (length x width x height) 40" x 55" x 91" (1x1.4x2.3m) 48" x 107"/130" x 79" (1.2x2.7/3.3x2m) 56" x 111"/130" x 79" (1.4x2.8/3.3x2m)


H

I

G

EC

D

F

B

A

Standard motor: 1800 rpmModel Spindle speeds (rpm)BP-40 95-135-190

267-380-534750-1065-1500

BP-50/50L 66-91-133206-288-418617-866-1255

BP-70/70L 62-81-104-133191-250-321-410532-683-878-1120

Optional spindle motorsModel Motor Speed rangeBP-40 1200 rpm 63-1000 rpmBP-40 3600 rpm 190-3000 rpmBP-40 900/1800 rpm 47-1500 rpmBP-40 1800-3600 rpm 95-3000 rpm

BP-50/50L 1200 rpm 46-878 rpmBP-50/50L 3600 rpm 132-2510 rpmBP-50/50L 900/1800 rpm 33-1255 rpmBP-50/50L 1800-3600 rpm 33-2510 rpm

BP-70/70L 1200 rpm 40-748 rpmBP-70/70L 3600 rpm 124-2440 rpmBP-70/70L 900/1800 rpm 31-1120 rpmBP-70/70L 1800-3600 rpm 62-2240 rpm

“RS” models are equipped with automatic feed reversing system for tapping.

Page 5

SeriesPPrismatic-column Multiple Head Drills

Clausing IBARMIA Prismatic-column MultipleHead industrial drilling machines are mounted to extra heavy-duty base. The slotted table offers greater ease in positioningand handling bulky and heavy workpieces.Multiple Head drilling machines are ideal forwork where the workpiece requires more thanone operation. Each drill head on a multiplehead drill can be equipped differently to perform the operation required by that headsuch as... (automatic drilling cycle, automatictapping or any of the equipment offered).In many cases where production of severalpieces are required, the Multiple Head drillsare more productive than machining centersat a much lower cost. 3BP-50

4BP-40

Page 6

Models Size A B C D E F G L M Nmin. max.

2 Head Drills

2BP-40 31.5"(800mm) 86"(2180mm) 50"(1270mm) 7.1"(180mm) 33.1"(840mm) 15.7"(400mm) 96"(2450mm) 15.7"(400mm) 27.6"(700mm) 37.4"(950mm) 49.2"(1250mm) 21.7"(550mm)

2BP-50 37.4"(950mm) 97"(2470mm) 51"(1320mm) 11"(280mm) 39.4"(1000mm) 18.7"(475mm) 108"(2750mm) 15.7"(400mm) 27.6"(700mm) 37.4"(950mm) 49.2"(1250mm) 21.7"(550mm)


3 Head Drills

3BP-40 31.5"(800mm) 86"(2180mm) 50"(1270mm) 7.1"(180mm) 33.1"(840mm) 15.7"(400mm) 96"(2450mm) 15.7"(400mm) 27.6"(700mm) 59"(1550mm) 70.9"(1800mm) 21.7"(550mm)

3BP-50 37.4"(950mm) 97"(2470mm) 51"(1320mm) 11"(280mm) 39.4"(1000mm) 18.7"(475mm) 108"(2750mm) 15.7"(400mm) 27.6"(700mm) 59"(1550mm) 70.9"(1800mm) 21.7"(550mm)

3BP-70 41.3"(1050mm) 103"(2820mm) 59"(14900mm) 9.1"(230mm) 43.3"(1100mm) 20.6"(525mm) 120"(3050mm) 19.69"(500mm) 27.6"(700mm) 65"(1650mm) 77"(1950mm) 23.6"(600mm)

4 Head Drills


4BP-50 37.4"(950mm) 97"(2470mm) 51"(1320mm) 11"(280mm) 39.4"(1000mm) 18.7"(475mm) 108"(2750mm) 15.7"(400mm) 27.6"(700mm) 81"(2050mm) 92.5"(2350mm) 21.7"(550mm)


5 Head Drills

5BP-40 31.5"(800mm) 86"(2180mm) 50"(1270mm) 7.1"(180mm) 33.1"(840mm) 15.7"(400mm) 96"(2450mm) 15.7"(400mm) 27.6"(700mm) 102.3"(2600mm) 114"(2900mm) 21.7"(550mm)

5BP-50 37.4"(950mm) 97"(2470mm) 51"(1320mm) 11"(280mm) 39.4"(1000mm) 18.7"(475mm) 108"(2750mm) 15.7"(400mm) 27.6"(700mm) 102.3"(2600mm) 114"(2900mm) 21.7"(550mm)


6 Head Drills


6BP-50 37.4"(950mm) 97"(2470mm) 51"(1320mm) 11"(280mm) 39.4"(1000mm) 18.7"(475mm) 108"(2750mm) 15.7"(400mm) 27.6"(700mm) 124"(3150mm) 136"(3450mm) 21.7"(550mm)


Multiple Spindle Dimensional Drawings

Multiple Spindle Models, Size and Dimensions

G

EC

D

F

B

A

M

L

N N N N N

Page 7

SeriesF/PPrismatic-column Optional EquipmentModel Description:

7044 Coolant System with separate tank (all models)

7022 Worklight with magnetic base (all models)

PST Cycle or spindle turn START foot pedal

PSR Spindle reverse foot pedal (for tapping)

MH-4 Cross Slide Table 27.56" x 14.17" (BP-40, BP-50, BP-70)

SeriesFAR-F 50% lower feed rate range

LDG-F Digital read-out system (2-axis), for MH-4 cross table

SERVOX-F Servo feed X axis

SERVOY-F Servo feed Y axis

TCR-F Quick tool change nut for ISO-30

SeriesPRPF-P Automatic pitch controlled tapping with single speed brake-motor

RPF-ANR-P Automatic pitch controlled tapping with pneumatic rapid approach

HGP-P Master guide spindle and nut set for automatic pitch

controlled tapping

ACNL-P Pneumatic counterbalance with rapid approach and retreat

ACNL-S-P Pneumatic counterbalance with rapid approach and retreat for

tube and profile drilling

ACNL-RPF-P Pneumatic counterbalance with rapid approach and retract with

pitch control tapping

AR-P 50% lower feed rate range

DLM-P Mechanical spotface device

CN-P Pneumatic counterbalance for spindle return

UN-P Union, dragging cone and assembly for multi-spindle head

GM-P Multi-spindle head guide rod

PM-P Start-stop and emergency stop pendent control

PMC-P Pendent control panel

ISO 40 P ISO-40 spindle with quick change nut (BP40, BP50, BP70)

ISO 50 P ISO-50 spindle with quick change nut (BP70)

PSTCycle or spindle turn STARTfoot pedalPSRSpindle reverse foot pedal (for tapping)

RSAutomatic feed reversing system for tapping(standard on SeriesF/P-RS models)

RPFAutomatic pitch controlled tapping with single speed brake-motor. (for SeriesP models)

RPF-ANRAutomatic pitch controlled tapping with pneumatic rapidapproach. (for SeriesP models)

SERVO X SERVO YElectronic “SERVO” feed unit for X/Y axes.Feed range: .79 to 39.37 in/minRapid feed: 39.37 in/minAvailable for MH-4 cross table

Page 8

Cross Slide TablesSeriesP for models BP-40, BP-50, BP-70

MH-4 Cross Slide Table X Travel = 27.56" Y Travel = 14.17"Table net weight 661 lbs.

ACNL

UC

GMPM

CM

Assembly for Multi-Spindle HeadsACNLAutomatic drilling cycle with rapid approach, working feed and rapid retract, with additional pneumatic counterweight function for the multi-spindle head.

UCUnion, dragging cone and assembly of the multi-spindlehead.

CMMulti-spindle head with fixed or adjustable spindle.

GMMulti-spindle head guide rod.

PMSTART/STOP and emergency STOP control extension.

ACNLPneumatic counterbalance forautomatic drillingcycle with rapidapproach, workingfeed and rapidretreat.(for SeriesB models)

ACNL-SPneumatic counterbalance forautomatic drillingcycle with two rapidapproaches, andrapid retreat, fortube and profiledrilling.(for SeriesB models)

CNPneumatic counterbalance for

spindle return, recommended formulti-spindle head applications.

(for SeriesP models)

LDGDigital read-out system.Available for MH-3 and MH-4 crosstable

Page 9

For detailed catalogs of the full line of Clausing Machine Tools visit our Web Site:

www.clausing-industrial.comor e-mail us and request an electronic (pdf) catalog at:

[email protected]

Your Authorized Clausing Precision Machine Tools Distributor

Issued 07-2010

Your Single Source for Machine Tools

Clausing Precision Lathesn Clausing/Colchester Geared Head Lathesn Clausing/Colchester Professional V.S. Lathesn Clausing Large Swing Standard and CNC Lathesn Clausing/Metosa Standard and CNC Lathes

Clausing Precision Millsn Clausing Bed Millsn Clausing CNC Bed Millsn Clausing Knee Millsn Clausing EVS Knee Mills

Clausing Precision Grindersn Clausing Manual Grindersn Clausing 2 & 3 Axes Hydraulic Grindersn Clausing ASDll Automatic Grindersn Clausing ASDlll Automatic Grinders

Clausing Precision Drillsn Clausing Belt-drive Drillsn Clausing Geared-head Drillsn Clausing Radial Drills

Clausing Precision Cutting Machinesn Clausing/Kalamazoo Horizontal Bandsawsn Clausing/Kalamazoo Vertical Bandsawsn Clausing/Kalamazoo Tilt Frame Miter Bandsawsn Clausing/Kalamazoo Cold Saws

Clausing Industrial, Inc.1819 North Pitcher StreetKalamazoo, Michigan 49007-1886Phone: 269-345-7155 Fax: 269-345-5945Information: [email protected]

CCaallll TToollll FFrreeee:: 800-323-0972or visit our website


Documents

Variable Speed 20 Single and Multi-spindle, Belt Drive ... · • Spindle reversing switch • Automatic tool ejector • Emergency STOP • High/low speed range selector • Drill