PRINCIPLE OF OPERATION

(A) Gas with entrained liquid enters thevessel where the gas expands and entersthe inertial vane mist extractor.

(B) Inertial forces resulting from rapiddirection change force liquid dropletsagainst the vane walls. Liquid dropletscoalesce on the vane wall surface.

(C) The liquid is then drained by gravity tothe liquid reservoir in the bottom of thevessel and away from the main gasstream.

STANDARD LINE SEPARATOR

Peerless Standard Line Separators provide a direct, straight-through design most typically used in plant air or gas systems. Body nominal diameters from 150mm to500mm and ratings up to 50 bar are availablefrom stock.

CUSTOM- DESIGNED

VARI-LINETM SEPARATORS

For applications where space is at a premiumand piping limitations prevent the use of astraight-through line separator, Peerless VARI-LINE Separators are designed with severalnozzle configurations. Internal bafflingpermits multiple combinations of inlet andoutlet connection locations (see figures A F).

LINE SEPARATOR BENEFITS

Efficient removal of liquids from gasstreams

Ideal for limited space installations Negligible pressure drop Wide range of gas capacities and

pressure ratings

Stock or custom (VARI-LINE) designs

PERFORMANCE GUARANTEE

Peerless Line Separators are guaranteed toremove 100% of all liquid droplets 8 micronsand larger. The outlet gas will contain nomore than 0.1 US gallon of entrained liquidper 13 litres MMSCF at maximum ratedcapacity.

LINE SEPARATORS

A B

C

making energy safe, efficient and clean

LINE SEPARATOR

VARI-LINE SEPARATORS

Figure A

Figure B

Figure C

Figure D

Figure E

Figure F

fold fold

making energy safe, efficient and clean

LINE SEPARATOR

For applications with space and piping limitations

VERTICAL SEPARATOR

For slug removal applications and small footprint installations

Flexible separator designs High-capacity vanes Guaranteed performance

TYPICAL APPLICATIONS

Gas transmission and metering Fuel gas conditioning Oil mist removal Chemical plants Ammonia and urea plants Desiccant bed protection Molecular sieve protection SAGD (Wet Steam)

HORIZONTAL SEPARATOR

For handling high liquid rates and large slugs

FOR HIGH-EFFICIENCY, HIGH-CAPACITY, COSTEFFECTIVE GAS AND LIQUID SEPARATION

Frequently used vane profilescomprising three double-pocket

and single-pocket designs

PRINCIPLE OF OPERATION

(A) Contaminated gas entering the vane unitis directed into adjacent vertical channelswhere each one subjects the gas to rapidmultiple changes in direction.

(B) Inertial forces resulting from rapiddirection change force liquid dropletsagainst the vane walls. Liquid dropletscoalesce on the vane wall surface.

(C) Gravity, surface tension, and momentumdrive the coalesced liquid into the vanepockets. Liquid flows down the pocketsand collects in the liquid reservoir.

(D) Clean gas exits the tail end of the vanepack.

SPECIAL FEATURES

Peerless Vane Separators are configured to meet the needs of special applications,including:

Fixed or removable vane elements Welded or bolted frameworks Wash systems Multi-stage systems Flow distribution manifolds Retrofit Kits

VANE PROFILES

Peerless Vane Elements are available in severalhigh-performance profiles. Peerless specifiesthe correct vane profile for each application.

CROSS SECTIONAL VIEW OFPEERLESS VANE ELEMENT

MIST EXTRACTOR CONFIGURATIONS

Vane elements of a specific profile areassembled into one of four majorconfigurations: single-bank, double-bank,four-bank and eight-bank. Configurations areselected to match specific applications. Design solutions are developed for uniqueoperational situations such as performanceenhancement or retrofits.

VANE ELEMENTS AND ASSEMBLIES

VANE PROFILES

P5X

P5

P6X

P8X

P8

BS EN ISO 9001:2000 Registered

Registered Office: Cardinals Court, Bradford Street,Braintree Essex, CM7 9AT, UKRegistration Number 2627558

Printed onRecycled Material

Incorporating:

Middle East Sales OfficePeerless Europe Limitedc/o Teyseer Trading & Contracting Co.PO Box 1556 , Doha, QatarTel: +974 44626367 Fax: +974 44626369Email: sales@peerlesseurope.com www.peerlesseurope.com

Peerless Europe Limited

Cardinals Court, Bradford Street, Braintree, Essex, CM7 9AT, UKTel: +44 (0)1376 556030 Fax: +44 (0)1376 556059Email: sales@peerlesseurope.comwww.peerlesseurope.com

C CA

B B D

Eight Bank Single Bank

Double V Bank Four Bank

Vane Seperators - 6x A4 single side sheets - roll fold:Layout 1 13/9/10 10:17 Page 1

fold fold

PEERLESS... COMBINING INNOVATION WITH EXPERTISEIN SEPARATOR DESIGN AND FABRICATION

Peerless Single Barrel separators serveeffectively as liquid slug-catchers and performespecially well in 3-phase applications.

Innovative Designs

Cost-Effective Retrofits

Guaranteed Performance

PRODUCT PERFORMANCE GUARANTEEPeerless Horizontal Slug Catcher Separators are guaranteed to remove 100% of all liquid

droplets 8 microns and larger. The outlet gas will contain no more than 0.1 US gallon of

entrained liquid per MMSCF at maximum rated capacity. (13 litres/Million SCM)

HORIZONTAL SEPARATORS

SINGLE BARREL GAS SEPARATOR

High efficiency liquid removal

Wide liquid handling operatingrange, including slug

Extremely high gas throughput

Options for 3-phase flowapplications

Large liquid retention volume

PRINCIPLE OF OPERATION

(A) Gas and liquid entering the vessel arediverted by the inlet baffle to removeslugs and bulk liquids.

(B) Liquid falls to the bottom of the vessel through quieting plates into the first sump.

(C) Gas and remaining mist enter the vane separator.

(D) Remaining liquid collected at thebottom of vane pack and is drained by the down-comer pipes.

(E) Submerged down-comer pipes andseal pots result in optimal drainage,whilst preventing gas bypass.

(F/G) Drains and liquid level controllersensure efficient liquid discharge out ofthe vessel.

FEATURES

These separators are designed to provideefficient liquid removal at high gas flowcapacities. They effectively handle largeliquid slugs and are easily applied to 3-phase separation.

HORIZONTAL SINGLE-BARREL SEPARATOR

C

D

E

A

BG

F

F

DOUBLE-BARREL SEPARATOR

High-efficiency liquid slug removal No liquid re-entrainment Extremely high gas throughput Lower barrel acts as a quiet

retention chamber

PRINCIPLE OF OPERATION

(A) Gas and liquid entering the vessel arediverted by inlet baffle to remove slugsand bulk liquids.

(B) Liquid drains into the lower barrelthrough the first down-comer pipe.

(C) Gas and remaining mist enter the vaneseparator.

(D) Remaining droplets collected at thebottom of the vane pack drain into the lower barrel through the seconddown-comer pipe.

(E) The split lower barrel with two sets of liquid level controllers ensure properdischarge of the liquid from the lowerbarrel.

FEATURES

Double-Barrel Separators are designed to provide efficient liquid removal. Theyachieve higher gas-flow capacitiesthrough the longitudinal arrangement of separation elements in the upperbarrel. The lower barrel segregates theliquid away from the gas flowing in the upper barrel, thus eliminating re-entrainment. The lower barrel acts as a retention chamber providing residencetime for gas bubbles to emerge from the liquid.

Peerless Double-Barrel Slug-Catchers efficientlyremove bulk liquids from high gas flows.

HORIZONTAL SEPARATORS

HORIZONTAL DOUBLE-BARREL SEPARATOR

A

PRODUCT PERFORMANCE GUARANTEEPeerless Double Barrel Slug Catcher Separators are guaranteed to remove 100% of all liquid droplets 8 microns and larger. The outlet gas will

contain no more than 0.1 US gallon of entrained liquid per MMSCF at maximum rated capacity. (13 litres/Million SCM)

B ED

C

VERTICAL GAS SEPARATOR BENEFITS

High-efficiency liquid removal fromgas streams

Broad operating range Effective slug removal Minimal footprint High and low liquid:gas ratio

compatibility Available as a retrofit to existing

vertical separators

PRINCIPLE OF OPERATION

(A) Gas and liquid entering vessel arediverted by the inlet baffle to removeslugs and bulk liquids.

(B) Gas and remaining mist enter the vaneseparator.

(C) Removed liquid collects at the bottom.

(D) The submerged down-comer pipe drainsliquids to the bottom of vessel.

(E) Liquid level controls monitor the collectedliquid amounts for efficient liquiddischarge out of the vessel.

FEATURES

Peerless Vertical Gas Separators are designedto handle both high and low liquid-to-gasratios. They are especially recommended forapplications where heavy liquid entrainmentcauses a slugging problem. Peerlessproprietary devices provide smaller vesselconfigurations when compared to mesh pador other separation devices.

VERTICAL SEPARATORS

PRODUCT PERFORMANCE GUARANTEEPeerless Vertical Gas Separators are guaranteed to remove 100% of all liquid droplets 8 microns and larger.

The outlet gas will contain no more than 0.1 US gallon of entrained liquid per MMSCF at maximum rated capacity. (13 litres/Million SCM)

VERTICAL GAS/LIQUID SEPARATOR

A

B

C

D E

Peerless Vertical Gas Separators operate in gasplants, refineries, petrochemical plants, andother applications where the vessel footprintmust be minimised.

Vane Seperators - 6x A4 single side sheets - roll fold:Layout 1 13/9/10 10:17 Page 2

fold fold

PEERLESS... COMBINING INNOVATION WITH EXPERTISEIN SEPARATOR DESIGN AND FABRICATION

Peerless Single Barrel separators serveeffectively as liquid slug-catchers and performespecially well in 3-phase applications.

Innovative Designs

Cost-Effective Retrofits

Guaranteed Performance

PRODUCT PERFORMANCE GUARANTEEPeerless Horizontal Slug Catcher Separators are guaranteed to remove 100% of all liquid

droplets 8 microns and larger. The outlet gas will contain no more than 0.1 US gallon of

entrained liquid per MMSCF at maximum rated capacity. (13 litres/Million SCM)

HORIZONTAL SEPARATORS

SINGLE BARREL GAS SEPARATOR

High efficiency liquid removal

Wide liquid handling operatingrange, including slug

Extremely high gas throughput

Options for 3-phase flowapplications

Large liquid retention volume

PRINCIPLE OF OPERATION

(A) Gas and liquid entering the vessel arediverted by the inlet baffle to removeslugs and bulk liquids.

(B) Liquid falls to the bottom of the vessel through quieting plates into the first sump.

(C) Gas and remaining mist enter the vane separator.

(D) Remaining liquid collected at thebottom of vane pack and is drained by the down-comer pipes.

(E) Submerged down-comer pipes andseal pots result in optimal drainage,whilst preventing gas bypass.

(F/G) Drains and liquid level controllersensure efficient liquid discharge out ofthe vessel.

FEATURES

These separators are designed to provideefficient liquid removal at high gas flowcapacities. They effectively handle largeliquid slugs and are easily applied to 3-phase separation.

HORIZONTAL SINGLE-BARREL SEPARATOR

C

D

E

A

BG

F

F

DOUBLE-BARREL SEPARATOR

High-efficiency liquid slug removal No liquid re-entrainment Extremely high gas throughput Lower barrel acts as a quiet

retention chamber

PRINCIPLE OF OPERATION

(A) Gas and liquid entering the vessel arediverted by inlet baffle to remove slugsand bulk liquids.

(B) Liquid drains into the lower barrelthrough the first down-comer pipe.

(C) Gas and remaining mist enter the vaneseparator.

(D) Remaining droplets collected at thebottom of the vane pack drain into the lower barrel through the seconddown-comer pipe.

(E) The split lower barrel with two sets of liquid level controllers ensure properdischarge of the liquid from the lowerbarrel.

FEATURES

Double-Barrel Separators are designed to provide efficient liquid removal. Theyachieve higher gas-flow capacitiesthrough the longitudinal arrangement of separation elements in the upperbarrel. The lower barrel segregates theliquid away from the gas flowing in the upper barrel, thus eliminating re-entrainment. The lower barrel acts as a retention chamber providing residencetime for gas bubbles to emerge from the liquid.

Peerless Double-Barrel Slug-Catchers efficientlyremove bulk liquids from high gas flows.

HORIZONTAL SEPARATORS

HORIZONTAL DOUBLE-BARREL SEPARATOR

A

PRODUCT PERFORMANCE GUARANTEEPeerless Double Barrel Slug Catcher Separators are guaranteed to remove 100% of all liquid droplets 8 microns and larger. The outlet gas will

contain no more than 0.1 US gallon of entrained liquid per MMSCF at maximum rated capacity. (13 litres/Million SCM)

B ED

C

VERTICAL GAS SEPARATOR BENEFITS

High-efficiency liquid removal fromgas streams

Broad operating range Effective slug removal Minimal footprint High and low liquid:gas ratio

compatibility Available as a retrofit to existing

vertical separators

PRINCIPLE OF OPERATION

(A) Gas and liquid entering vessel arediverted by the inlet baffle to removeslugs and bulk liquids.

(B) Gas and remaining mist enter the vaneseparator.

(C) Removed liquid collects at the bottom.

(D) The submerged down-comer pipe drainsliquids to the bottom of vessel.

(E) Liquid level controls monitor the collectedliquid amounts for efficient liquiddischarge out of the vessel.

FEATURES

Peerless Vertical Gas Separators are designedto handle both high and low liquid-to-gasratios. They are especially recommended forapplications where heavy liquid entrainmentcauses a slugging problem. Peerlessproprietary devices provide smaller vesselconfigurations when compared to mesh pador other separation devices.

VERTICAL SEPARATORS

PRODUCT PERFORMANCE GUARANTEEPeerless Vertical Gas Separators are guaranteed to remove 100% of all liquid droplets 8 microns and larger.

The outlet gas will contain no more than 0.1 US gallon of entrained liquid per MMSCF at maximum rated capacity. (13 litres/Million SCM)

VERTICAL GAS/LIQUID SEPARATOR

A

B

C

D E

Peerless Vertical Gas Separators operate in gasplants, refineries, petrochemical plants, andother applications where the vessel footprintmust be minimised.

Vane Seperators - 6x A4 single side sheets - roll fold:Layout 1 13/9/10 10:17 Page 2

PRINCIPLE OF OPERATION

(A) Gas with entrained liquid enters thevessel where the gas expands and entersthe inertial vane mist extractor.

(B) Inertial forces resulting from rapiddirection change force liquid dropletsagainst the vane walls. Liquid dropletscoalesce on the vane wall surface.

(C) The liquid is then drained by gravity tothe liquid reservoir in the bottom of thevessel and away from the main gasstream.

STANDARD LINE SEPARATOR

Peerless Standard Line Separators provide a direct, straight-through design most typically used in plant air or gas systems. Body nominal diameters from 150mm to500mm and ratings up to 50 bar are availablefrom stock.

CUSTOM- DESIGNED

VARI-LINETM SEPARATORS

For applications where space is at a premiumand piping limitations prevent the use of astraight-through line separator, Peerless VARI-LINE Separators are designed with severalnozzle configurations. Internal bafflingpermits multiple combinations of inlet andoutlet connection locations (see figures A F).

LINE SEPARATOR BENEFITS

Efficient removal of liquids from gasstreams

Ideal for limited space installations Negligible pressure drop Wide range of gas capacities and

pressure ratings

Stock or custom (VARI-LINE) designs

PERFORMANCE GUARANTEE

Peerless Line Separators are guaranteed toremove 100% of all liquid droplets 8 micronsand larger. The outlet gas will contain nomore than 0.1 US gallon of entrained liquidper 13 litres MMSCF at maximum ratedcapacity.

LINE SEPARATORS

A B

C

making energy safe, efficient and clean

LINE SEPARATOR

VARI-LINE SEPARATORS

Figure A

Figure B

Figure C

Figure D

Figure E

Figure F

fold fold

making energy safe, efficient and clean

LINE SEPARATOR

For applications with space and piping limitations

VERTICAL SEPARATOR

For slug removal applications and small footprint installations

Flexible separator designs High-capacity vanes Guaranteed performance

TYPICAL APPLICATIONS

Gas transmission and metering Fuel gas conditioning Oil mist removal Chemical plants Ammonia and urea plants Desiccant bed protection Molecular sieve protection SAGD (Wet Steam)

HORIZONTAL SEPARATOR

For handling high liquid rates and large slugs

FOR HIGH-EFFICIENCY, HIGH-CAPACITY, COSTEFFECTIVE GAS AND LIQUID SEPARATION

Frequently used vane profilescomprising three double-pocket

and single-pocket designs

PRINCIPLE OF OPERATION

(A) Contaminated gas entering the vane unitis directed into adjacent vertical channelswhere each one subjects the gas to rapidmultiple changes in direction.

(B) Inertial forces resulting from rapiddirection change force liquid dropletsagainst the vane walls. Liquid dropletscoalesce on the vane wall surface.

(C) Gravity, surface tension, and momentumdrive the coalesced liquid into the vanepockets. Liquid flows down the pocketsand collects in the liquid reservoir.

(D) Clean gas exits the tail end of the vanepack.

SPECIAL FEATURES

Peerless Vane Separators are configured to meet the needs of special applications,including:

Fixed or removable vane elements Welded or bolted frameworks Wash systems Multi-stage systems Flow distribution manifolds Retrofit Kits

VANE PROFILES

Peerless Vane Elements are available in severalhigh-performance profiles. Peerless specifiesthe correct vane profile for each application.

CROSS SECTIONAL VIEW OFPEERLESS VANE ELEMENT

MIST EXTRACTOR CONFIGURATIONS

Vane elements of a specific profile areassembled into one of four majorconfigurations: single-bank, double-bank,four-bank and eight-bank. Configurations areselected to match specific applications. Design solutions are developed for uniqueoperational situations such as performanceenhancement or retrofits.

VANE ELEMENTS AND ASSEMBLIES

VANE PROFILES

P5X

P5

P6X

P8X

P8

BS EN ISO 9001:2000 Registered

Registered Office: Cardinals Court, Bradford Street,Braintree Essex, CM7 9AT, UKRegistration Number 2627558

Printed onRecycled Material

Incorporating:

Middle East Sales OfficePeerless Europe Limitedc/o Teyseer Trading & Contracting Co.PO Box 1556 , Doha, QatarTel: +974 44626367 Fax: +974 44626369Email: sales@peerlesseurope.com www.peerlesseurope.com

Peerless Europe Limited

Cardinals Court, Bradford Street, Braintree, Essex, CM7 9AT, UKTel: +44 (0)1376 556030 Fax: +44 (0)1376 556059Email: sales@peerlesseurope.comwww.peerlesseurope.com

C CA

B B D

Eight Bank Single Bank

Double V Bank Four Bank

Vane Seperators - 6x A4 single side sheets - roll fold:Layout 1 13/9/10 10:17 Page 1

fold fold

PEERLESS... COMBINING INNOVATION WITH EXPERTISEIN SEPARATOR DESIGN AND FABRICATION

Peerless Single Barrel separators serveeffectively as liquid slug-catchers and performespecially well in 3-phase applications.

Innovative Designs

Cost-Effective Retrofits

Guaranteed Performance

PRODUCT PERFORMANCE GUARANTEEPeerless Horizontal Slug Catcher Separators are guaranteed to remove 100% of all liquid

droplets 8 microns and larger. The outlet gas will contain no more than 0.1 US gallon of

entrained liquid per MMSCF at maximum rated capacity. (13 litres/Million SCM)

HORIZONTAL SEPARATORS

SINGLE BARREL GAS SEPARATOR

High efficiency liquid removal

Wide liquid handling operatingrange, including slug

Extremely high gas throughput

Options for 3-phase flowapplications

Large liquid retention volume

PRINCIPLE OF OPERATION

(A) Gas and liquid entering the vessel arediverted by the inlet baffle to removeslugs and bulk liquids.

(B) Liquid falls to the bottom of the vessel through quieting plates into the first sump.

(C) Gas and remaining mist enter the vane separator.

(D) Remaining liquid collected at thebottom of vane pack and is drained by the down-comer pipes.

(E) Submerged down-comer pipes andseal pots result in optimal drainage,whilst preventing gas bypass.

(F/G) Drains and liquid level controllersensure efficient liquid discharge out ofthe vessel.

FEATURES

These separators are designed to provideefficient liquid removal at high gas flowcapacities. They effectively handle largeliquid slugs and are easily applied to 3-phase separation.

HORIZONTAL SINGLE-BARREL SEPARATOR

C

D

E

A

BG

F

F

DOUBLE-BARREL SEPARATOR

High-efficiency liquid slug removal No liquid re-entrainment Extremely high gas throughput Lower barrel acts as a quiet

retention chamber

PRINCIPLE OF OPERATION

(A) Gas and liquid entering the vessel arediverted by inlet baffle to remove slugsand bulk liquids.

(B) Liquid drains into the lower barrelthrough the first down-comer pipe.

(C) Gas and remaining mist enter the vaneseparator.

(D) Remaining droplets collected at thebottom of the vane pack drain into the lower barrel through the seconddown-comer pipe.

(E) The split lower barrel with two sets of liquid level controllers ensure properdischarge of the liquid from the lowerbarrel.

FEATURES

Double-Barrel Separators are designed to provide efficient liquid removal. Theyachieve higher gas-flow capacitiesthrough the longitudinal arrangement of separation elements in the upperbarrel. The lower barrel segregates theliquid away from the gas flowing in the upper barrel, thus eliminating re-entrainment. The lower barrel acts as a retention chamber providing residencetime for gas bubbles to emerge from the liquid.

Peerless Double-Barrel Slug-Catchers efficientlyremove bulk liquids from high gas flows.

HORIZONTAL SEPARATORS

HORIZONTAL DOUBLE-BARREL SEPARATOR

A

PRODUCT PERFORMANCE GUARANTEEPeerless Double Barrel Slug Catcher Separators are guaranteed to remove 100% of all liquid droplets 8 microns and larger. The outlet gas will

contain no more than 0.1 US gallon of entrained liquid per MMSCF at maximum rated capacity. (13 litres/Million SCM)

B ED

C

VERTICAL GAS SEPARATOR BENEFITS

High-efficiency liquid removal fromgas streams

Broad operating range Effective slug removal Minimal footprint High and low liquid:gas ratio

compatibility Available as a retrofit to existing

vertical separators

PRINCIPLE OF OPERATION

(A) Gas and liquid entering vessel arediverted by the inlet baffle to removeslugs and bulk liquids.

(B) Gas and remaining mist enter the vaneseparator.

(C) Removed liquid collects at the bottom.

(D) The submerged down-comer pipe drainsliquids to the bottom of vessel.

(E) Liquid level controls monitor the collectedliquid amounts for efficient liquiddischarge out of the vessel.

FEATURES

Peerless Vertical Gas Separators are designedto handle both high and low liquid-to-gasratios. They are especially recommended forapplications where heavy liquid entrainmentcauses a slugging problem. Peerlessproprietary devices provide smaller vesselconfigurations when compared to mesh pador other separation devices.

VERTICAL SEPARATORS

PRODUCT PERFORMANCE GUARANTEEPeerless Vertical Gas Separators are guaranteed to remove 100% of all liquid droplets 8 microns and larger.

The outlet gas will contain no more than 0.1 US gallon of entrained liquid per MMSCF at maximum rated capacity. (13 litres/Million SCM)

VERTICAL GAS/LIQUID SEPARATOR

A

B

C

D E

Peerless Vertical Gas Separators operate in gasplants, refineries, petrochemical plants, andother applications where the vessel footprintmust be minimised.

Vane Seperators - 6x A4 single side sheets - roll fold:Layout 1 13/9/10 10:17 Page 2

PRINCIPLE OF OPERATION

(A) Gas with entrained liquid enters thevessel where the gas expands and entersthe inertial vane mist extractor.

(B) Inertial forces resulting from rapiddirection change force liquid dropletsagainst the vane walls. Liquid dropletscoalesce on the vane wall surface.

(C) The liquid is then drained by gravity tothe liquid reservoir in the bottom of thevessel and away from the main gasstream.

STANDARD LINE SEPARATOR

Peerless Standard Line Separators provide a direct, straight-through design most typically used in plant air or gas systems. Body nominal diameters from 150mm to500mm and ratings up to 50 bar are availablefrom stock.

CUSTOM- DESIGNED

VARI-LINETM SEPARATORS

For applications where space is at a premiumand piping limitations prevent the use of astraight-through line separator, Peerless VARI-LINE Separators are designed with severalnozzle configurations. Internal bafflingpermits multiple combinations of inlet andoutlet connection locations (see figures A F).

LINE SEPARATOR BENEFITS

Efficient removal of liquids from gasstreams

Ideal for limited space installations Negligible pressure drop Wide range of gas capacities and

pressure ratings

Stock or custom (VARI-LINE) designs

PERFORMANCE GUARANTEE

Peerless Line Separators are guaranteed toremove 100% of all liquid droplets 8 micronsand larger. The outlet gas will contain nomore than 0.1 US gallon of entrained liquidper 13 litres MMSCF at maximum ratedcapacity.

LINE SEPARATORS

A B

C

making energy safe, efficient and clean

LINE SEPARATOR

VARI-LINE SEPARATORS

Figure A

Figure B

Figure C

Figure D

Figure E

Figure F

fold fold

making energy safe, efficient and clean

LINE SEPARATOR

For applications with space and piping limitations

VERTICAL SEPARATOR

For slug removal applications and small footprint installations

Flexible separator designs High-capacity vanes Guaranteed performance

TYPICAL APPLICATIONS

Gas transmission and metering Fuel gas conditioning Oil mist removal Chemical plants Ammonia and urea plants Desiccant bed protection Molecular sieve protection SAGD (Wet Steam)

HORIZONTAL SEPARATOR

For handling high liquid rates and large slugs

FOR HIGH-EFFICIENCY, HIGH-CAPACITY, COSTEFFECTIVE GAS AND LIQUID SEPARATION

Frequently used vane profilescomprising three double-pocket

and single-pocket designs

PRINCIPLE OF OPERATION

(A) Contaminated gas entering the vane unitis directed into adjacent vertical channelswhere each one subjects the gas to rapidmultiple changes in direction.

(B) Inertial forces resulting from rapiddirection change force liquid dropletsagainst the vane walls. Liquid dropletscoalesce on the vane wall surface.

(C) Gravity, surface tension, and momentumdrive the coalesced liquid into the vanepockets. Liquid flows down the pocketsand collects in the liquid reservoir.

(D) Clean gas exits the tail end of the vanepack.

SPECIAL FEATURES

Peerless Vane Separators are configured to meet the needs of special applications,including:

Fixed or removable vane elements Welded or bolted frameworks Wash systems Multi-stage systems Flow distribution manifolds Retrofit Kits

VANE PROFILES

Peerless Vane Elements are available in severalhigh-performance profiles. Peerless specifiesthe correct vane profile for each application.

CROSS SECTIONAL VIEW OFPEERLESS VANE ELEMENT

MIST EXTRACTOR CONFIGURATIONS

Vane elements of a specific profile areassembled into one of four majorconfigurations: single-bank, double-bank,four-bank and eight-bank. Configurations areselected to match specific applications. Design solutions are developed for uniqueoperational situations such as performanceenhancement or retrofits.

VANE ELEMENTS AND ASSEMBLIES

VANE PROFILES

P5X

P5

P6X

P8X

P8

BS EN ISO 9001:2000 Registered

Registered Office: Cardinals Court, Bradford Street,Braintree Essex, CM7 9AT, UKRegistration Number 2627558

Printed onRecycled Material

Incorporating:

Middle East Sales OfficePeerless Europe Limitedc/o Teyseer Trading & Contracting Co.PO Box 1556 , Doha, QatarTel: +974 44626367 Fax: +974 44626369Email: sales@peerlesseurope.com www.peerlesseurope.com

Peerless Europe Limited

Cardinals Court, Bradford Street, Braintree, Essex, CM7 9AT, UKTel: +44 (0)1376 556030 Fax: +44 (0)1376 556059Email: sales@peerlesseurope.comwww.peerlesseurope.com

C CA

B B D

Eight Bank Single Bank

Double V Bank Four Bank

Vane Seperators - 6x A4 single side sheets - roll fold:Layout 1 13/9/10 10:17 Page 1

123456