Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
This water cooler is certified toNSF/ANSI 61.
GENERALSelf-contained, wall hung electric refrigeratedwater coolers with reliable vandal-resistantdesign. Constructed in 14 gauge heavy-dutystainless steel with a curved profile offering a safe and unobtrusive design. Ideal forapplications prone to tampering, such as prisons and educational facilities. Includes the water-efficient, SmartFlow™ Bubbler.
When properly installed, unit meets state andfederal requirements as defined by theAmericans with Disabilities Act for both childrenor adults. Unit is certified to NSF/ANSI 61 andmeets requirements of the Safe Drinking WaterAct. Unit is UL Listed and provides 50ºF water at 80oF inlet water and 90ºF ambient.
COOLER CABINET / BASINHeavy-duty 14 gauge stainless steel cabinet withfront access panel and integral basin. Durablesatin finish resists stains and corrosion and iseasy to maintain. Perforated venting with screensto prevent objects from being inserted into cooler.
COOLER TOPBasin has embossed bubbler pad. Anti-splashridge reduces splatter and contoured to insureproper drainage. Features heavy-duty, vandal-resistant drain.
VANDAL RESISTANT SMARTFLOW™BUBBLERVandal-resistant, water-efficient bubbler is one-piece, chrome-plated. Unit has integral hoodguard design to prevent contaminiation fromother users, airborne deposits and tampering.Reduces the flow of water by nearly 40%▲
but maintains a steady, satisfying water stream.Keyed into position to prevent rotation.
PUSHBUTTON ACTUATION MECHANISMSelf-closing, vandal-resistant pushbutton doesnot require grasping or twisting. Allows frontaccess stream height adjustment.
AUTOMATIC STREAM HEIGHT REGULATORSelf-closing assembly is located inside unit toprevent tampering. Unit resists corrosion andliming. A constant stream height is automaticallymaintained under line pressures that vary from 20 to 105 psi.
INLET STRAINEREasily cleaned in-line strainer screen traps articlesof 140 microns of larger before entering thewaterway.
TEMPERATURE CONTROLPositive sensing thermostat for controllingtemperature of storage tank water. Factory set at 50ºF. Adjustable +/- 5ºF.
STORAGE TANKStainless steel evaporator/storage tank for long life.
REFRIGERATION SYSTEMHermetically sealed, positive start compressorwith lifetime lubrication, built-in overloadprotection, efficient capillary sizing, large capacity dryer-stainer, and self-lubricated fancools copper/aluminum condenser. System uses R134a refrigerant. Protected by HalseyTaylor’s Limited 5 Year Warranty.
VENTILATIONInsure proper ventilation be maintaining 6”(152mm) minimum clearance from cabinetventing to wall.
SUGGESTED SPECIFICATIONSSelf-contained, vandal-resistant pressure watercooler that shall deliver 8 gph of 50ºF drinkingwater at 90ºF ambient and 80ºF inlet water. Unitshall be constructed of 14 gauge stainless steelwith integral basin. Venting shall include protective screening. Front vandal-resistantpush button activation with less than 5 lbs offorce. Water-efficient, vandal-resistant bubblershall be one-piece and operate on 20-105 psisupply line pressure. Shall include front accessstream height adjustment. Cooling system shallinclude insulated stainless steel evaporatortank, R134a refrigerant and calibrated capillarytube for refrigerant control. Shall includeadjustable, accessible thermostat. Shall complywith ANSI 117:1 and American with DisabilitiesAct for both children and adult frontal approach.The manufacturer shall certify the unit to meetthe requirements of NSF/ANSI 61, Safe DrinkingWater Act and be UL Listed.
NOTE: Continued product improvementmakes specifications subject to changewithout notice. See Halsey Taylor websitefor most current spec sheet.
Stainless Steel Finish Only
Optional Accessories (extra cost)
■■ Water Filter
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
A36 /8-2011
MODEL: ■■ HVR8HD-BL ADA Bi-Level Wall-Mounted
Barrier-Free Cooler
Vandal-ResistantHeavy-Duty 14-Gauge
halseytaylor.com
* With projector service and tap water at 80ºF and 90º F ambientTrap and service stop not included
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE:
HVR8HD-BL ADA SERIESModel Base* F.L. RatedNo. Rate Amps Watt
Cap. Usage
HVR8HD-BL ADA 8.0 4.0 370
▲ over average market performance
Printed in the U.S.A.
HVR8HD-BL ADA
Vandal-ResistantHeavy Duty 14-Gauge Bi-Level Barrier-FreeCooler(CONTINUED)
MOUNTING HEIGHTMounting height recommended 311/2" frombasin to floor. May be mounted at any desiredheight. Check local codes.
MOUNTING INSTRUCTIONSMount trap and install service stop to supplyline. Anchor hanger bracket securely to wall onall sides. Remove slip nut and gasket from trapand install on waste line tube. Hang cooler onbracket and engage waste line tube into trap
inlet. Centerline height of waste outlet will varyfrom floor line depending on mounting height. Install 3/8" supply tube to in-line strainer. Securebottom of cooler to wall using holes provided.
Trap and service stop not included.
OPERATING PRESSURES:Supply water - 105 psi maximum
ELECTRICAL 115 Volt / 60 Hz units furnished with plug-in, 3 wire grounding type service cord. Standard115 volt, 60 Hz, single phase. Install 115 voltreceptacle rated at 15-amp minimum toreceive 3-wire parallel blade grounding typemale plug.
FRONT VIEW / WALL LAYOUT SIDE VIEW
C
CL
L
C
E F
D
A
B
F
F
FINISHED FLOORPISO ACABADOPLANCHER FINI
HANGER BRACKETSFIJADOR DE SUSPENSION
SUPPORT DE SUSPENSION
5/16" DIA. (10 HOLES)8mm (10 AGUJEROUS)
8mm ( 10 TROUS)
5 15/16"( 150mm )
27" *( 686mm )
3"( 77mm )
18 9/16"( 472mm )
31 1/2"( 800mm )
RIMHEIGHT
32 9/16"( 827mm )ORIFICEHEIGHT
39 1/16"( 992mm )ORIFICEHEIGHT
12 5/8"( 320mm )
18 3/4"( 476mm )
20 1/8"( 511mm )
25 1/8"( 638mm )
3 1/2"( 89mm )
4 1/2"( 114mm )
5"( 127mm )
1 3/8"( 35mm )
1 3/8"( 35mm )
5 3/4"( 146mm )
5 3/4"( 146mm )
1 3/8"( 35mm )
1 3/8"( 35mm )
5 3/4"( 146mm )
5 3/4"( 146mm )
18 5/16"( 465mm )
19 1/8"( 486mm ) 2 7/16"
( 63mm )
1 9/16"( 40mm )
10"( 254mm )
5"( 127mm )
36 1/8"( 918mm )
6 1/2"( 165mm )
8 1/8"( 206mm )
6 1/2"( 166mm )
36 1/2"( 927mm )
LEGEND:
A = RECOMMENDED WATER SUPPLY LOCATION. SHUT OFF VALVE (NOT FURNISHED) TO ACCEPT 3/8" O.D. UNPLATED COPPER TUBE.B = RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/2" O.D. DRAINC = 1-1/2" TRAP NOT FURNISHEDD = ELECTRICAL SUPPLY (3) WIRE RECESSED BOXE = INSURE PROPER VENTILATION BY MAINTAINING 6" (152 mm) (MIN.) CLEARANCE FROM CABINET LOUVERS TO WALL.F = 5/16 BOLT HOLES FOR FASTENING UNIT TO WALL
* Adult ADA requirement (shown) - 27" (686mm); Child ADA requirement - 24" (608mm). Adjust all other measurements accordingly.