VALVES AEROSOL FOR ACTUATORS - coster.com.arcoster.com.ar/en_GB/Download/Catalogue/Actuators-Section.pdf · S T R E S N I L A N O I T C E R I D D R A D N A T S NOTES: actuator V04.804

2.0.01

ACTUATORS FOR AEROSOL VALVES

A wide range of standard actuators for aerosol valves are available to match the varying applications required.

Besides the actuators for common uses (foams, gels, liquid and viscous products, etc.) there are also actuators with special characteristics and functions.

Actuators and spray caps are listed on catalogue.

In the spray caps the central button is positioned between two higher side walls, in order to avoid accidental actuation: a protection cap is therefore no longer necessary.

Both the actuators and the spraycaps come in standard white. Different colours are available on request.

All dimensional specifications in the catalogue should be considered only for reference use.

revision: 7 30/09/2015

COSTER

2.0.02

STANDARD MICROMIST INSERTS

Prechamber

Ø O

rific

e

S

A

BPrechamber

Ø O

rific

e

S

A

B

DIRECTIONAL INSERTS STRUCTURE

F - Flat W - With Nozzle

channels

MICROMIST STRUCTURE

SPRAY CONE

N - Narrow

< 2

5°

M - Medium

25°

÷ 4

0°

L - Large

> 4

0°

Spray cone based on alcohol-butane products (50% - 50%)

Prechamber

Ø O

rific

es

H

SA

B

L

revision: 7 30/09/2015

NOTES: [ 1 ] Not applicable to 600 and 1300 series actuators and to 900 series slotted actuators.

Code Spray Orifice Orifice S Prechamber Dimens. Dimens. Standard Type Notes Cone Ø thickness Y/N Ø Thickness A B Colour

V06.205 N 0.60÷0.70 2.70 NO 4.6 1.1 Red F [ 2 ]

V06.210 N 0.80 0.70 YES 1.3 0.4 2.7 1.5 Green F [ 3 ]

V06.211 N 1.00 0.70 YES 1.3 0.4 2.7 1.5 White F [ 3 ]

V06.261 N 0.50 0.50 YES 1.2 1.4 3.3 1.4 Black W [ 4 ]

V06.263 N 0.50 0.80 YES 1.2 1.1 3.3 1.4 Sky blue W [ 4 ]

V06.264 N 0.58 0.50 YES 1.2 1.4 3.3 1.4 White W [ 4 ]

V06.268 N 0.65 0.50 YES 1.2 1.4 3.3 1.4 White W [ 4 ]

STANDARD DIRECTIONAL INSERTS

NOTES: [ 2 ] Only for V04.804 actuator [ 3 ] Only for V05.553, V05.905, V05.910, V05.1310, V05.770, V05.1770, V05.1803, V05.1843 actuators [ 4 ] Only for V05.770, V05.1770, V05.1803, V05.1843 actuators

V06.201 M 0.50÷0.60 0.60 4 0.50 x 0.50 NO 2.70 1.50 Yellow

V06.202 L 0.40 0.25 4 0.15 x 0.20 NO 2.70 1.50 Sky blue

V06.203 M 0.30 0.20 3 0.20 x 0.25 YES 0.50÷1.00 0.20 2.70 1.50 Black

V06.204 L 0.45 0.50 4 0.25 x 0.30 YES 1.6 0.60 2.70 1.30 Grey

V06.206 M 0.50 0.50 4 0.45 x 0.50 YES 1.6 0.60 3.10 1.50 Brown

V06.207 M 0.60÷0.70 1.00 4 0.45 x 0.70 NO 3.20 1.50 Sage green

V06.208 M 0.40 0.40 4 0.15 x 0.40 NO 2.70 1.50 Amaranth

V06.209 M 0.48 0.35 6 0.25 x 0.20 NO 2.70 1.85 Black [ 1 ]

V06.212 M 0.50 0.30 6 0.25 x 0.40 NO 2.70 1.65 Brown [ 1 ]

V06.213 M 0.30 0.20 3 0.20 x 0.25 YES 0.50÷1.00 0.20 2.70 2.05 White [ 1 ]

V06.215 M 0.50 1.00 2 0.45 x 0.80 NO 2.90 1.10 Yellow

V06.220 L 0.50 0.20 4 0.40 x 0.25 YES 1.2 0.35 2.70 1.90 Dark grey [ 1 ]

V06.221 M 0.60÷0.70 0.60 4 0.50 x 0.50 NO 2.70 1.50 Lilac

V06.222 L 0.50 0.30 4 0.25 x 0.30 NO 2.70 1.50 Black

V06.225 L 0.45 0.60 4 0.25 x 0.30 NO 2.70 1.50 Sage green

V06.226 M 0.50 0.30 4 0.50 x 0.50 NO 2.70 1.50 Yellow

V06.228 M 0.80 0.70 4 0.50 x 0.50 NO 2.70 1.50 Azure

V06.230 M 0.60÷0.70 1.00 4 0.35 x 0.70 NO 3.20 1.50 Red

V06.231 M 0.30 0.60 4 0.20 x 0.30 NO 2.70 1.50 White

V06.232 N 0.30 0.30 4 0.20 x 0.30 NO 2.70 1.50 Green

V06.233 M 0.40 0.60 4 0.25 x 0.30 NO 2.70 1.50 Blue

V06.234 N 0.25÷0.35 0.40 4 0.20 x 0.30 NO 2.70 1.50 Grey

V06.235 M 0.55÷0.90 0.70 4 0.25 x 0.20 NO 3.10 1.50 Black

V06.236 N 0.45÷1.00 0.80 3 0.30 x 0.30 NO 3.00 1.50 Azure

V06.237 M 0.45÷0.55 0.80 3 0.25 x 0.35 YES 1.2 0.35 3.00 1.50 Amaranth

V06.238 M 1.00 0.70 4 0.50 x 0.50 NO 2.70 1.50 Neutral

V06.239 M 0.60 0.35 6 0.25 x 0.20 NO 2.70 1.85 Ivory [ 1 ]

V06.241 M 0.35 0.25 4 0.45 x 0.50 YES 1.6 0.65 3.10 1.75 Pink [ 1 ]

V06.252 M 0.60 0.70 4 0.50 x 0.80 YES 0.60÷1.20 0.50 3.10 1.10 Red

V06.260 M 0.45÷0.55 1.00 4 0.35 x 0.70 NO 3.20 1.50 White

V06.269 M 0.40 0.35 6 0.25 x 0.20 NO 2.70 1.85 Blue [ 1 ]

V06.270 N 0.30 0.30 4 0.20 x 0.30 NO 2.70 1.50 Green

V06.271 N 0.25 0.40 4 0.15 x 0.20 NO 2.70 1.50 Red

V06.272 M 0.40 0.25 3 0.30 x 0.40 YES 0.40÷1.00 0.20 2.70 1.50 White

V06.273 M 0.28 0.25 4 0.15 x 0.10 NO 2.70 1.50 Neutral

Code

Spra

y co

ne

Orifi

ce D

iam

eter

Thic

knes

s Or

ifice

S

No. o

f cha

nnel

s

L x

H Ch

anne

ls

Prec

ham

ber

Prec

ham

ber D

iam

eter

Prec

ham

ber T

hick

ness

Dim

ensi

on A

Dim

ensi

on B

Stan

dard

Col

our

Note

s

COSTER

2.1.01

ACTU

ATOR

S

ACTUATORS

Coster manufactures a wide range of actuators of various types and sizes, suitable for most applications of aerosol products.

SERIES 1300 ACTUATORS 2.1.05For press down valves with stem Ø 3.9.

SERIES 900 ACTUATORS 2.1.06Slotted actuators for press down and tilt-action valves with stem Ø 3.9.




SERIES 2300 ACTUATORS 2.1.08For press down valves with stem Ø 3.9. Suitable for filling with actuator fitted on the valve.



ACTUATORS FOR FOAM 2.1.10For press down valves with stem Ø 3.9.

ACTUATORS FOR GEL 2.1.11For press down valves with stem Ø 3.9.

revision: 9 15/07/2016

COSTER

2.1.02revision: 9 15/07/2016

OVERCAPS 2.1.12For actuators for foam and for gel.

FOAMING ACTUATORS 2.1.13For upside-down use for press down valves with stem Ø 3.9.

ACTUATORS FOR WHIPPED CREAM 2.1.14For upside-down use for press down valves with stem Ø 3.9.

SERIES 600 ACTUATORS 2.1.15For tilt-action valves with stem Ø 3.9.

SERIES 400 ACTUATORS 2.1.15For vertical spray, for press down and tilt-action valves with stem Ø 3.9.

SPECIAL ACTUATORS 2.1.16For press down and tilt-action valves with stem Ø 3.9.

ACTUATORS WITH SPECIAL INSERTS 2.1.17For press down valves with stem Ø 3.9.

ACTUATORS WITH EXTENSION TUBE 2.1.19For press down valves with stem Ø 3.9.

ACTUATORS FOR PHARMACEUTICALS 2.1.20For press down valves with stem Ø 3.9.

ACTUATORS FOR NASAL APPLICATIONS 2.1.21For standard valves or pumps with stem Ø 3.9.



ACTUATORS FOR PHARMACEUTICALS 2.1.25For press down valves with stem Ø 2.8.

ACTUATORS WITH EXTENSION TUBE 2.1.26For press down valves with stem Ø 2.8.

ASTHMA INHALERS 2.1.27For press down valves with stem Ø 2.8.

COSTER

2.1.03

ACTU

ATOR

S

revision: 9 15/07/2016

ACTUATORS FOR AUTOMATIC DISPENSERS 2.1.31For valves with stem Ø 2.8.

ACTUATORS FOR EUROSTEM VALVES 2.1.32For press down valves with eurostem Ø 3.3.

TWIST ACTUATOR 2.1.33Twist-lock actuator for press down valves with stem Ø 3.9.

CRYSTAL ACTUATOR 2.1.35Crystal actuator for press down valves with stem Ø 3.9.

ROTOR ACTUATOR 2.1.37Rotor twist-lock actuator for press down valves with stem Ø 3.9.

CAPRI ACTUATOR 2.1.39Capri actuator for press down valves with stem Ø 3.9 and eurostem Ø 3.3.

COSTER

2.1.04revision: 9 15/07/2016

COSTER

2.1.05revision: 4

30/09/2015

VO5.1371

V05.1301, V05.1350,V05.1356

VO5.1310

SERIES 1300 ACTUATORS

VO5.1355, V05.1358,VO5.1360

FOR PRESS DOWN VALVES WITH STEM Ø 3.9

Series 1300 actuators are usually supplied fitted on the valve.

V05.1371: with micromist insert. Can use all micromist inserts described at page 2.0.02.

CODE Ø ORIFICE (mm)

V05.1301 0.50

V05.1350 1.00

V05.1356 0.85

V05.1301, V05.1350, V05.1356: actuators without insert for medium-narrow directional spray.

V05.1310: with directional insert. Can use all directional inserts described at page 2.0.02.

12.9

6.4

2.1

Ø 10.8

Ø 12

12.9

6.4

2.1

Ø 10.8

Ø 12

12.9

6.4

2.1

Ø 10.8

Ø 1212

.9

6.4

2.1

Ø 10.8

Ø 12

V05.1355, V05.1358, V05.1360: actuators without insert for narrow directional spray.


V05.1355 0.80

V05.1358 0.65

V05.1360 1.00

2.1.06

COSTERrevision: 1 31/07/2010

V05.905

V05.945

V05.901



V05.551

V05.553

V05.945: without insert for directional spray. Orifice Ø 0.65 mm.





FOR PRESS DOWN AND TILT-ACTION VALVES WITH STEM Ø 3.9

Series 900 slotted actuators can be supplied fitted on the valve. Designed to be positioned in the appropriate cap.


14.6

6.4

1.8

Ø 10.8

Ø 12

14.6

6.4

1.8

Ø 10.8

Ø 12

14.6

6.4

1.8

Ø 10.8

Ø 12

16

12

3

Ø 23

Ø 21.5

16

12

3

Ø 23

Ø 21.5

COSTER

2.1.07revision: 2

31/03/2012


V05.703

V05.740, V05.760,V05.775

V05.2701

V05.770WITH EXTENSION

V05.701

Ø 17.7

15.6

Ø 22.8

12.5

6 Ø 17.7

15.6

Ø 22.8

12.5

6

Ø 17.7

15.6

Ø 22.8

10.8

6

Ø 17.7

15.6

Ø 22.8

12.0

5

6

Ø 17.7

15.6

Ø 22.8

10.8

6

8.7 L

V05.770





V05.2701: with micromist insert. With Ø 0.5 mm reduction in the stem socket. Only for BOV2 and BOV3 valves. Can use all micromist inserts described at page 2.0.02.

V05.770 WITH EXTENSION: with fitted polypropylene V06.74/L or V06.75/L extension.

CODE Ø A LENGTH ORIFICE L V06.74/10 0.80 10

V06.74/15 0.80 15

V06.75/10 1.50 10

V06.75/15 1.50 15

15.6

10.8

6

Ø 22.8

Ø 17.7

V05.740, V05.760, V05.775: without insert for directional spray.

CODE ORIFICE Ø (mm)

V05.740 0.50

V05.760 0.60

V05.775 0.75

Ø A

2.1.08





15.6

12.2

5.5

Ø 22.8

Ø 17.7

V05.2101



12.8

7.2

2.1

Ø 12.5

Ø 10.8

V05.2370

V05.2371

V05.2370: with micromist insert. Actuator with TDW (Tactile Danger Warning) symbol for the blind.Can use all micromist inserts described at page 2.0.02.

Series 2300 actuators are designed to be used with heads which do not use sealing gaskets. They are normally supplied already mounted on the valve.

V05.2371: with micromist insert. Can use all micromist inserts described at page 2.0.02.12

.8

7.2

2.1

Ø 12.5

Ø 10.8




V04.804: with micromist insert. Suitable for oven cleaners.

V04.804

V05.870

Ø 19.7

20

Ø 21.6

12

1.5

Ø 19.7

20

Ø 21.6

12

1.5

COSTER

2.1.09revision: 5

31/07/2010



V05.1801: with micromist insert. Can use all micromist inserts described at page 2.0.02. (*)

V20.60, V20.87, V20.92: overcaps. Details at page 2.1.12.

V05.1803: with directional insert. Can use all directional inserts described at page 2.0.02. (*)

V05.1803

V05.1801

Ø 26.2

23.4

14.6

5.5 6.5

Ø 34.1

Ø 32.3

Ø 26.2

23.4

14.6

5.5 6.5

Ø 34.1

Ø 32.3

(*) These actuators, if they are to be used with an aluminium mounting cup, are only compatible with the version that has a reduced external diameter (V01.47/R e V01.135/R).

V05.1841

V05.1843

V20.87

V05.1841: with micromist insert. Can use all micromist inserts described at page 2.0.02. Only for ogive-shapedaluminum cans, Ø max 40 mm. (*)

V05.1843: with directional insert. Can use all directional inserts described at page 2.0.02. Only for ogive-shapedaluminum cans, Ø max 40 mm. (*)

Ø 26.2 25

.9

17.1

8 9

Ø 34.1

Ø 32.3

Ø 26.2

25.9

17.1

8 9

Ø 34.1

Ø 32.3

V20.60 V20.92

OVERCAPS FOR SERIES 1800 ACTUATORS

2.1.10


ACTUATORS FOR FOAM

14.4

19.2

Ø 23.5

12.5

5

23 20

Ø 34.5

14.5

5.3

Ø 26.2

25.1

Ø 34.1

14.6

5.5 6.5

Ø 32.5

15.3

16.1

11.3

6.5

Ø 23.8

Ø 26.2

23.4

Ø 34.1

14.6

5.5

6.5

Ø 32.3

V05.963

V05.453

V05.992

V05.496

V05.967

FOR PRESS DOWN VALVESWITH STEM Ø 3.9

V05.453: actuator for foaming products. Orifice Ø 2 mm.

V05.496: actuator for foaming products. Orifice Ø 2.2 mm.

V05.992: actuator for foaming products. Orifice equivalent Ø 3 mm. (*)

V05.963: actuator for foaming products. Orifice Ø 2.4 mm. (*)

V05.967: actuator for foaming products. Orifice equivalent Ø 3 mm. (*)


COSTER

2.1.11revision: 6

31/03/2012

ACTUATORS FOR GEL


V05.982

V05.452

V05.987

V05.983

V05.987: actuator for gel products. Orifice Ø 0.8 mm. (*)

V05.452: actuator for gel products. Orifice Ø 1.2 mm.



Ø 23.5

19.2

14.4

11.8

5

23

20

Ø 34.5

15

5.3

Ø 32.5

25.1

Ø 34.1

14.6

6.5

Ø 26.2

5.5

Ø 32.3

23.4

Ø 34.1

14.6

6.5

Ø 26.2

5.5

V05.981: actuator for gel with flow-ratereduction in the seating of the stem.Only for BOV2 and BOV3 valves. (*)

V05.981


Ø 32.3

23.4

Ø 34.1

14.6

6.5

Ø 26.2

5.5

V04.1443

V04.1443: actuator with special insert for gel products. Orifice Ø 1.8 mm.Only for 20K and 20BOV valves.

14.9

Ø 16.3

11

11.5

2.1.12

COSTER

OVERCAPS

FOR ACTUATORS SERIES 1800,ACTUATORS FOR FOAM,ACTUATORS FOR GEL

revision: 3 31/07/2010

V16.125: for V05.963 and V05.983actuators only.

V20.60: overcap with gloss surface for V05.967, V05.981, V05.982, V05.987, V05.992 and 1800 series actuators.

V20.87: overcap with gloss surface for V05.967, V05.987 and 1800 series actuators.

V20.87

V16.125

V20.60 Ø 34 25

.5

R 3.5

Ø 30.4 3.9

8

Ø 34

21.5

Ø 34

25.5

R 3.5

V20.92: overcap with satin surfacefor V05.967, V05.981, V05.982, V05.987, V05.992 and 1800 series actuators.

V20.92

COSTER

2.1.13revision: 5

31/03/2012

ACTUATORS FOR FOAM FOR UPSIDE-DOWN USE

V05.990

V05.988

V05.1984

21.2

14.1

6

5

Ø 32.5

41.5

Ø 34.1

16.6

7 8

Ø 5.5 FOR PRESS DOWN VALVES WITH STEM Ø 3.9

V05.1984: with fan spray, typical for foam household or industrial products.

V05.988: only for aluminium cans with Ø max 50 mm and ogival shoulder. Available with V20.21 or V20.26 overcap. (*)(°)

V05.990: only for aluminium cans with Ø max 53 mm and ogival shoulder. Available with V20.26 or V20.88 overcap. (*)(°)

44.3

15.2

6 8

Ø 32.5

Ø 34.1

Ø 30.5

Ø 6.5

Ø 34.5

(*) These actuators, if they are to be used with an aluminium mounting cup, are only compatible with the version that has a reduced external diameter (V01.47/R e V01.135/R).(°) If used with aluminum cans with a flat flaring, verification of proper functioning is necessary.

2.1.14


V05.938

V20.21

V20.26

ACTUATORS FOR WHIPPED CREAM FOR UPSIDE-DOWN USE

Ø 34

39.5

Ø 34

OVERCAPS

R = 1

R = 3.5


V05.938: available with V20.21 or V20.26 overcaps. (*)

V20.21: overcap for V05.938, V05.988 actuators.

FOR ACTUATORS FOR FOAM AND ACTUATORSFOR WHIPPED CREAM

V20.26: overcap for V05.938, V05.988, V05.990 actuators.

42

14.6

5

Ø 32.5

Ø 12.5

Ø 35

5.3

V20.88

V20.88: overcap for V05.990 actuator.

Ø 34

44

R = 20

R = 13


39.5

COSTER

2.1.15revision: 2

31/03/2012


V05.671

V05.650, V06.656

V05.658, V06.660

Ø 12

12.6

6.4

2.1

Ø 10.8

Ø 12

12.6

6.4

2.1

Ø 10.8

Ø 12

12.6

6.4

2.1

Ø 10.8

V05.622 WITH TUBE

Ø 12 12

.6

V07.9/L

6.4

L

2.1

Ø 10.8

FOR TILT-ACTION VALVES WITH STEM Ø 3.9

The series 600 actuators can be supplied fitted on the valve.


V05.650, V05.656: actuators without insert for medium-narrow directional spray.


V05.650 1.00

V05.656 0.85

V05.658, V05.660: actuators without insert for narrow directional spray.


V05.658 0.65

V05.660 1.00

ACTUATOR TUBE Ø ORIFICE (mm) Ø ORIFICE (mm) 0.5 0.6

V05.622: for HD polyethylene V07.9/L tube supplied unfitted. Tube length (L) on request.

SERIES 400 ACTUATORS FOR VERTICAL SPRAY

FOR PRESS DOWN AND TILT-ACTION VALVES WITH STEM Ø 3.9

V05.417, V05.419: without insert for directional spray.



V05.417 0.50

V05.419 0.70

V05.416

V05.417, V05.419

Ø 6.5

21

10.5

8.3

Ø 6.5

21

10.5

8.3

Ø 24 Ø 29

Ø 24

Ø 29

2.1.16


SPECIAL ACTUATORS

V05.36

V05.432

FOR VALVES WITH STEM Ø 3.9

V05.432: without insert. Standard colour: red. For lubricating and de-icing locks.

V05.911

V05.911: without insert. Foaming Actuator. Only for tilt-action valves for upside-down use with 20 mm mounting cup (20TR).

20

12

2.2

Ø 25.75

Ø 11.75

15

7.2

1.8

Ø 8

Ø 5.5

32.2

12.8

7

Ø 6

Ø 17

V05.36: without insert. Slotted model for complete emptying of the can (one shot).


V05.36/4 0.40

V05.36/9 0.90

V05.1906

V05.1906: without insert. Twin Spray Actuator with double delivery hole Ø 0.4 mm.

32.2

12.8

7

Ø 6

Ø 17

18.7

6.4

2.1

Ø 12Ø 6

V05.978

V05.978: without insert for directional spray. Only for tilt-action valves.

COSTER

2.1.17revision: 2

15/02/2015

ACTUATORS WITH SPECIAL INSERTS

V05.498

V05.498 + V07.15/L + V05.958


V05.498: valve covering actuator with spout for inserting tubes and accessories.

V05.498 + V07.15/L + V05.958: with polypropylene V07.15/L tube and V05.958 end actuator. Tube length (L) on request. Supplied unfitted.Actuator is not suitable for pharmaceuticals applications.

19

14.6

30.8

Ø 34.5

V05.498 + V06.68/L: with polypropylene V06.68/L tube supplied fitted. Tube length (L) on request.

V16.125

Ø 30.4 3.9

8

V05.498 + V16.96

V05.498+V16.96: actuator with brush insert. Supplied unfitted.

V05.125: overcap for V05.498 actuator.

2.1.18


ACTUATORS WITH SPECIAL INSERTS


V04.498/L

V04.498/L: actuator suitable for tire inflators/repair products. PVC + brass tube supplied fitted. Tube length (L) on request.

COSTER

2.1.19

ACTUATORS WITH EXTENSION TUBE

revision: 3 15/02/2015


V05.1322: with HD polyethylene V07.9/L tube, supplied unfitted. Tube length (L) on request. Actuator can be supplied fitted on the valve. ACTUATOR ORIFICE Ø (mm) 0.5 TUBE ORIFICE Ø (mm) 0.6

V05.722: with HD polyethylene V07.9/L tube, supplied unfitted. Tube length (L) on request. ACTUATOR ORIFICE Ø (mm) 0.5 TUBE ORIFICE Ø (mm) 0.6

V05.1164 + V06.1/L: for dental use. With AISI 304 stainless steel V06.1/L tube, fitted.

TUBE VO6.1/73 73 LENGTH (mm) VO6.1/120 120

ACTUATOR ORIFICE Ø (mm) 0.4 TUBE ORIFICE Ø (mm) 1.0

V05.723: with LD polyethylene V07.12/L tube or with polypropylene V07.15/L tube. Tube supplied unfitted. Tube length (L) on request.

V07.12 ORIFICE ACTUATOR 1.0

Ø (mm) TUBE 3.6

V07.15 ORIFICE ACTUATOR 1.0

Ø (mm) TUBE 1.0

V05.1322

V05.722

V05.1164 + V06.1/L

V05.723

V05.498: with polypropylene V07.15/L tube, supplied fitted. Tube length (L) on request.Actuator is not suitable for pharmaceuticals applications.

V05.498

ACTUATOR ORIFICE Ø (mm) 2.5 TUBE ORIFICE Ø (mm) 1.0

2.1.20



V05.466 + V06.59/130: supplied with V06.59/130 vaginal tube not fitted. Tube length = 130 mm. Different lengths on request.

V05.466 + V06.59/13020

.8

12.8

10.5

2

Ø 8

Ø 23

V04.2480

V04.2480: nasal actuator with internal micromist insert.

Supplied with V20.109 overcap.

ACTUATORS FOR PHARMACEUTICALS

53.4

20.6

50.8

Ø 14

24.8

Ø 23.7

38.5

COSTER

2.1.21

NASAL ACTUATOR FOR VALVES

revision: 4 30/09/2015

SALUS ACTUATOR FOR SEA-WATER SOLUTIONS FOR STANDARD VALVES OR PUMPS WITH STEM Ø 3.9 MM

12.9

Ø 23.4

17.7

Ø 5.6

39.9

Ø A Ø B

4.8

CODEØ A

(mm)Ø B

(mm)VERSION

V21.147/30/40 0.30 0.40 Adult

V21.149/25/25 0.25 0.25 Kid

V21.151/75/40 0.75 0.40 Jet

V21.151/75/75 0.75 0.75 Super Jet

V21.147 - V21.151

12.9

Ø 23.4

17.7

Ø 5.8

V21.147, V21.149, V21.151: nasal actuator suitable for KV continuous valves and all male Bag-On-valves.

Also suitable for 32MSPfine mist Spray Pump(only for 100 µl dose size).

Its ergonomic shape makes irrigation easier also for children and aged people.

Special internal insert (secure & reliable).

Limited risk of after-use bacterial contamination.

Clean Room manufacturing.

Can be Gamma-irradiated (Max 40 KGy).

All components are in EP/USP compliant material (Polyethylene HD).

Can be supplied with V20.106 translucent shaped plastic overcap unfitted.

39.9

Ø A Ø B

V21.149

2.1.22


NASAL ACTUATOR FOR VALVES

Ø 5.8 Ø A Ø B

Ø 23.4

17.7

39.9

Ø 5.6Ø A Ø

B

17.7

39.9

4.8

V21.148 - V21.152

SALUS ACTUATOR FOR SEA-WATER SOLUTIONS FOR FEMALE BAG-ON-VALVES (KWBFU - NKWBFU)

V21.148, V21.150, V21.152: nasal actuator suitable only for female Bag-On-valve (KWBFU - NKWBFU).

Its ergonomic shape makes irrigation easier also for children and aged people.

Special internal insert (secure & reliable).

Limited risk of after-use bacterial contamination.

Clean Room manufacturing.

Can be Gamma-irradiated (Max 40 KGy).

All components are in EP/USP compliant material (Polyethylene HD).

Can be supplied with V20.106 translucent shaped plastic overcap unfitted.

V21.150

CODEØ A

(mm)Ø B

(mm)VERSION

V21.148/30/40 0.30 0.40 Adult

V21.150/25/25 0.25 0.25 Kid

V21.152/75/40 0.75 0.40 Jet

V21.152/75/75 0.75 0.75 Super Jet

COSTER

2.1.23revision: 4

31/03/2012


V05.1253

V05.1245

V05.1271

V05.1233

14

Ø 13.9

7.8

4.6

9.9

Ø 12.65

8

4.15

9.9

Ø 14.7

8

4.15

15.5

Ø 14.7

8.2

4.6

V05.1245: with micromist insert. Can use all micromist inserts described at page 2.0.02. With silver or gold metal sheathing on request.





2.1.24

COSTERrevision: 231/03/2012


V05.1471

V05.1405

V05.149213

Ø 14

9.7

4.7

14.9

Ø 16.3

8.8

5

15.5

Ø 14.7

8.8

4.6





Series 1400 actuators are not suitable for metered dose valves.

COSTER

2.1.25


V05.497


V05.497: nasal actuator without insert. Can be supplied with the V16.46 overcap.

V05.29

17.5

Ø 24

19.3

43.6

9.8 14

.5

Ø 13.5

9.5

V05.31

revision: 730/04/2013

8.2 14

.5

Ø 13.5

V05.6

V05.31: foaming actuator.

V05.6: directional actuator.

V05.29: foaming actuator. For 20D and 32D valves.

8.2 14

.5

Ø 13.5

9.5

2.1.26

COSTER



V05.1278: throat-spray products actuator with micromist insert.

V05.447 + V06.59/130: supplied with V06.59/130 vaginal tube not fitted. Tube length = 130 mm. Different lengths on request.

20.8

12.8

8.8

2

Ø 8

Ø 23

V05.27

V05.26 + V06.1/L

V05.27: with HD polyethylene V07.9/L tube, supplied unfitted. Tube length (L) on request.

ACTUATORS WITH EXTENSION TUBE


V05.26 + V06.1/L: with AISI 304 stainless steel fitted tube. For dental use.

V05.1278

V05.447 + V06.59/130

60

14.5

18.1

23

Ø 24

TUBE VO6.1/73 73 LENGTH (mm) VO6.1/120 120

revision: 5 31/03/2012

COSTER

2.1.27revision: 2

31/03/2012

ASTHMA INHALERS

FOR PRESS DOWN VALVES WITH STEM Ø 2.8 & Ø 3.18

2-PIECE ASTHMA INHALER FOR METERING VALVES

V05.1227: FOR 20DR VALVEV05.1280: FOR 20DPH VALVE

Actuator supplied with V20.94 protective cap.

Different spray holes available for HFA or CFC propellants;

Color code according to formulation or customer requirements.

Can be customized with company logo.

Ergonomic design.

V05.1227 / V05.1280 + V20.94

26.7

57.5

74.8

30.7

19.1 X 27.4

14.9

13.5

14.6 X 22.8

2.1.28

COSTER

ASTHMA INHALERS

FOR PRESS DOWN VALVES WITH STEM Ø 2.8 & Ø 3.18

revision: 1 31/03/2012

V05.1296 / V05.1297 + V20.101


V05.1296: FOR 20DR VALVEV05.1297: FOR 20DPH VALVE




Can be customized with company logo.

Ergonomic design.

27.7 X 29.9

57.9

75

27.6

15.6

13.4

16.3 X 23.4

19.9 X 28.4

COSTER

2.1.29revision: 1

31/03/2012

ASTHMA INHALERS


V05.1256 + V20.93


V05.1256: FOR 20DR VALVE




Ergonomic design.

44.5

56.3

74.9

Ø 3

27.4 13.5 29.7

16.4

26.7

23.5

67.0

Ø A

2.1.30

COSTER

ASTHMA INHALERS


revision: 2 31/03/2012

V05.23 + V16.289

V05.23 + V16.1

V05.23: inhaler actuator. Can be supplied with the V16.1 or V16.289 overcap.

7

Ø 2

8.3

19.6

38.7

16.6

23

Ø 24.5

Ø 2

4.5

19.6

10.2

38.7

16.6

23

Ø 24.5

Ø 2

6.1

Ø 2

4.5

COSTER

2.1.31revision: 5

20/07/2016

ACTUATORS FOR AUTOMATIC DISPENSERS

V05.962

V04.972

11

3.6

6.9

7.5

14 2.5

2

FOR VALVES WITH STEM Ø 2.8

V05.962: actuator for automatic dispensers.

3.8

12

17

6.6 6.6

V04.972: actuator with insert for automatic dispensers.

2.1.32


ACTUATORS FOR EUROSTEM VALVES

V05.1770WITH EXTENSION

V05.1771

V05.893

V05.1770



FOR PRESS DOWN VALVES WITH EUROSTEM Ø 3.3

V05.893: foaming actuator.

V05.1770 WITH EXTENSION: with polypropylene V06.74/L or V06.75/L fitted extension.

CODE Ø A LENGTH ORIFICE L V06.74/10 0.80 10

V06.74/15 0.80 15

V06.75/10 1.50 10

V06.75/15 1.50 15

15.6

11.2

6

Ø 22.8

Ø 17.7

15.6

10.5

6

Ø 17.7

Ø 22.8

15.6

10.5

6

L 8.7

Ø 17.7

Ø 22.8

Ø A

19.2

12.2

5

14.4

Ø 23.5

V05.1871

V05.1873

V05.1871: with micromist insert. Can use all micromist inserts described at page 2.0.02. Can use overcaps(see page 2.1.12). (*)

V05.1873: with directional insert. Can use all directional inserts described at page 2.0.02. Can use overcaps(see page 2.1.12). (*)

23.4

13.4

6.5

Ø 26.2

Ø 34.1

Ø 32.3

5.5

23.4

13.4

6.5

Ø 26.2

Ø 34.1

Ø 32.3

5.5

(*) If intended for use with an aluminum mounting cup, these actuators are only compatible with the version that has a reduced external diameter (V01.47/R and V01.135/R).

COSTER

2.1.33revision: 4

31/03/2012

TWIST ACTUATOR

TWIST-LOCK ACTUATOR FOR PRESS-DOWN VALVESWITH STEM Ø 3.9

V21.94 V21.99

25.4

14.7

8.2

Ø 34.5

Ø 33.9

5.5

25.4

14.7

8.2

Ø 34.5

Ø 33.9

5.5

V21.94: actuator with micromist insertand tamper-tag (Warranty Seal).Can use all micromist inserts describedat page 2.0.02, except V06.252. (*)

V21.99: actuator with directional insertand tamper-tag (Warranty Seal).Can use all directional inserts describedat page 2.0.02. (*)

(*) If intended for use with an aluminum mounting cup, these actuators are only compatible with the version that has a reduced external diameter (V01.47/R and V01.135/R).

V21.120: actuator with micromist insertand without tamper-tag (Warranty Seal).Can use all micromist inserts describedat page 2.0.02, except V06.252. (*)

V21.121: actuator with directional insertand without tamper-tag (Warranty Seal).Can use all directional inserts describedat page 2.0.02. (*)

V21.120V21.121

2.1.34


TWIST ACTUATOR

SECURITY LOCK-UNLOCK POSITION

UNLIMITED COLOUR COMBINATIONS

Twist is a valve-cover actuator suitable for both aluminum and tin-plate cans.

Twist incorporates the twist-lock closure system, which prevents accidental use of the actuator:actuator can be pressed only after rotation.

Two versions are available: with or without additional tamper-tag (Warranty Seal).

From the top:

- the version without additional tamper-tag;

- the version with the additional tamper-tag;

- close-up of the tamper-tag.

This highly visible Warranty Seal, located at the back of the actuator,must be removedbefore using the actuator.

The visible tamper-tag is available only for V21.94 and V21.99 versions.

Both the rotation block ring and the actuator key can be produced in any numberof different opaque or translucent colours.

The actuator is available in both micromist insert and directional insert versions.

The former is suitable for alcohol-based deodorants, sun-sprays, hair sprays and similar products; the latter is suitable for products containing components in suspension, such as anti-perspiration deodorants (AP), dry shampoos and so on.

COSTER

2.1.35revision: 2

15/02/2015

CRYSTAL ACTUATOR

CRYSTAL ACTUATOR FOR PRESS-DOWN VALVESWITH STEM Ø 3.9

V21.112

V21.113

V21.112: Crystal spray actuator with micromist insert, suggested for aluminium cans with ogival shouder, Ø max 53 mm. Can use all micromist inserts described at page 2.0.02.

V21.113: Crystal anti-perspirant actuator with directional insert, suggested for aluminium cans with ogival shouder, Ø max 53 mm. Can use all directional inserts described at page 2.0.02.

27.4

15.9

7.5

Ø 34.1

Ø 32

6.5

27.4

15.9

7.5

Ø 34.1

Ø 32

6.5

2.1.36


CRYSTAL ACTUATOR

FEATURES


Crystal is a actuator in a spray version and a directional version for deodorants.

In terms of styling, the Crystal actuator features a transparent crystaline cover with the activation zone protected by an unbreakable seal.

The finished article is thus a single unit, both practical and available for immediate use, with no need for a protective cap.

Both the actuator key and cover can be pro-duced in any number of different translucent colours.


The former is suitable for alcohol-based deodorants; the latter is suitable for products containing components in suspension, such as anti-perspiration deodorants (AP).

COSTER

2.1.37revision: 2

30/09/2015

ROTOR ACTUATOR

ROTOR TWIST-LOCK ACTUATOR FOR PRESS-DOWN VALVESWITH STEM Ø 3.9

V21.127

V21.128

V21.127: Rotor spray actuator with micromist insert, suggested for aluminium cans with ogival shouder, Ø max 53 mm. Can use all micromist inserts described at page 2.0.02 except V06.252.

V21.128: Rotor anti-perspirant actuator with directional insert, suggested for aluminium cans with ogival shouder, Ø max 53 mm. Can use all directional inserts described at page 2.0.02.

26

15.7

10.5

Ø 34.5

Ø 33.85

6.5

26

15.7

10.5

Ø 34.5

Ø 33.85

6.5

26

15.7

10.5

Ø 34.5

Ø 33.85

6.5

26

15.7

10.5

Ø 34.5

Ø 33.85

6.5

These actuators are not suitable for KPM and RKRA type valves (long stroke).

2.1.38


ROTOR ACTUATOR

FEATURES


Rotor is a new snap-on 1” valve actuatorwith twist-locking mechanism.

The rotating closure ring thatsignals “locked!” with an audible click,and has two ribbed areas foran ergonomic feel and easy turning.

The finger pad sits below the twistcollar to avoid accidental actuationand to ensure high top-load resistance.

The actuator snaps on over the 1” valvemounting cup and is designed to fit moststandard size aluminum and tinplate cans.

Rotor is particularly suitable for usewith ogival shoulder aluminum cans.

Rotor is developed for diverse productapplications such as sunscreens,topical sprays, deodorant and A/P sprayproducts; it is usable with most Costerstandard inserts.

Both the rotation closure ring and the actuatorkey can be produced in any numberof different opaque or translucent colours.


The former is suitable for alcohol-baseddeodorants, sun-sprays, hair sprays and similar products; the latter is suitablefor products containing componentsin suspension, such as anti-perspirationdeodorants (AP), dry shampoos and so on.

COSTER

2.1.39revision: 0

15/02/2015

CAPRI ACTUATOR

CAPRI ACTUATOR FOR PRESS-DOWN VALVESWITH STEM Ø 3.9AND EUROSTEM Ø 3.3

V21.143, V21.145

V21.144, V21.146

Capri spray actuator with micromist insert and overcap. Suggested for aluminium can with ogival shoulder, Ø max 45 mm. Can use all Coster micromist inserts, except V06.252. The overcap can have two different surfaces: glossy or matt.

27

17.6

3

Ø 36

8.3

V21.143: version for valves with stem Ø 3.9.

V21.145: version for valves with eurostem Ø 3.3.

Capri anti-perspirant actuator with directional insert and overcap. Suggested for aluminium can with ogival shoulder, Ø max 45 mm.Can use all Coster directional inserts.The overcap can have two different surfaces: glossy or matt.

V21.144: version for valves with stem Ø 3.9.

V21.146: version for valves with eurostem Ø 3.3.

32

27

16.2

5

3

Ø 36

8.3

32

27

17.6

3

Ø 36

8.3

32

27

16.2

5

3

Ø 36

8.3

32

2.1.40


CAPRI ACTUATOR

FEATURES


Capri is a two piece spray actuator with overcap suitable for 1’’ male aerosol valves.

It consists of a finger pad with integrated spray channel, conveniently fitted within the collar.

The finger pad is ergonomically designed with ribbed finish for an easy and comfortable actuation.

OvercapCapri is also equipped with an overcap, available either with matt or glossy surface.

ApplicationsCapri is suitable for a wide range of products such as deodorants (both DEO and AP), cosmetics, sunscreens, pharmaceuticals and households; it can be equipped with most Coster standard inserts.

Capri has a universal and unisex look which makes it easy to adapt and customize to a variety of products.

Finger pad, collar and overcap can all be supplied in any colour, allowing unlimited combinations.

COSTER

2.2.01

SPRA

Y CA

PSSPRAY CAPS

SPRAY CAPS FOR TIN PLATE CANS 2.2.03Spray caps for necked-in tin plate cans for press down valves with stem Ø 3.9.

SPRAY CAPS FOR VARIOUS CANS 2.2.04Spray caps for various cans for press down valves with stem Ø 3.9.

SPRAY CAPS FOR VERTICAL SPRAY 2.2.04Spray caps for vertical use for soft-touch valves with eurostem Ø 3.3.

ORBIT SPRAY CAP 2.2.05Spray cap for Ø 45, 49, 52 necked-in tin plate cans,Ø 45, 50, 53 Cebal Transfer alu-cans; for press down valves with stem Ø 3.9.

SFERA SPRAY CAP 2.2.07Spray cap for Ø 52 necked-in tin plate cans, Ø 53 Cebal Transfer alu-cans and BOV dual compartment sistem valve.

NASH SPRAY CAP 2.2.09Spray cap for Ø max 50 transfer aluminium cans for press down valves with stem Ø 3.9.

HYDRA SPRAY CAP 2.2.11Spray cap for Ø 57 necked-in tin plate cansfor press down valves with stem Ø 3.9.

DOLOMITE SPRAY CAP 2.2.13Spray cap for Ø 49 necked-in tin plate cansfor press down valves with eurostem Ø 3.3.

revision: 715/07/2016

COSTER

2.2.02

Ø Nominal D1 D2 H2 H5 C

45 43.60 45.20 5.60 5.30 2.90

49 47.80 49.30 7.00 5.50 2.90

52 50.70 52.70 8.00 5.60 3.20

57 55.50 57.60 9.50 6.00 3.30

65 63.20 65.90 13.50 6.30 3.30

H 2 ± 0

,4D2 ± 0,3

D1 ± 0,3

C ±

0,1

5

H 5

+ 0

,5

- 0

NECKED-IN CAN DIMENSIONSAS PER EN 15007 (EX FEA 214 E) SPECIFICATIONS

HINGED TUBE-HOLDER INSERTSUITABLE FOR ALL SPRAY CAPS

12,5

V16.225/224 hinged tube-holder insert with polypropylene V07.15/L tube, supplied fitted from 100 mm to 160 mm length. Other length on request (tube supplied unfitted).

Insert supplied separately from the spray cap.

Below, detail of the insert; right, the tube seat insert with the tube fitted.

revision: 7 15/07/2016

COSTER

2.2.03revision: 1

31/03/2012

SPRAY CAPS FOR TIN PLATE CANS

V17.18, V17.19, V17.20, V17.22, V17.26

B

A

V17.24, V17.25

B

A


V17.18, V17.19, V17.20, V17.22, V17.26: spraycap with micromist insert for necked-in tin plate cans. Available in different dimensions for cans of varying diameters. Can use all micromist inserts described at page 2.0.02.

CODE CAN A B Ø mm

V17.18 45 31 45

V17.19 52 33 47

V17.20 57 33 47

V17.22 49 33 47

V17.26 65 38 52

Can dimension at page 2.2.02.

V17.24, V17.25: spraycap with micromist insert for necked-in tin plate cans. Available in different dimensions for cans of varying diameters. Can use all micromist inserts described at page 2.0.02.

CODE CAN A B Ø mm

V17.24 49 27.2 41.2

V17.25 52 30.5 44.5

V17.52, V17.53, V17.59

A

B

CODE CAN A B Ø mm

V17.52 49 23.6 42.4

V17.53 52 25.0 45.0

V17.59 57 27.2 49.0

V17.52, V17.53, V17.59: spraycap with micromist insert for necked-in tin plate cans. Available in different dimensions for cans of varying diameters. Can use all micromist inserts described at page 2.0.02.

2.2.04


SPRAY CAPS FOR TIN PLATE CANS

V17.70, V17.71


V17.70, V17.71: spraycap with micromist insert for necked-in tin plate cans. Available in different dimensions for cans of varying diameters. Can use all micromist inserts described at page 2.0.02.

A

SPRAY CAPS FOR VERTICAL SPRAY

FOR SOFT-TOUCH VALVES WITH EUROSTEM Ø 3.3

V18.62: monobloc spray cap for necked-in Ø 52 tin plate cans. Suitable only for soft-touch valves with short stroke and reduced activation pressure type KEN (eurostem Ø 3.3). No micromist insert is needed.

V18.62

47

26

Ø 52

SPRAY CAPS FOR ALUMINIUM CANS Ø 35


V17.31: spraycap with micromist insert for aluminium cans Ø 35. Can use all micromist inserts described at page 2.0.02.

V17.31

36

22

Ø 34.3

CODE CAN A B Ø mm

V17.70 52 35.5 50.0

V17.71 57 34.2 50.0

B

COSTER

2.2.05revision: 4

31/03/2012

ORBIT SPRAY CAP


V21.85, V21.86, V21.92: Orbitspray cap with micromist insert for necked-in tin plate cans and Cebal Transfer alu-cans. Can use all micromist inserts described at page 2.0.02.

V21.93, V21.95, V21.96: Orbit spray cap with directional insertfor necked-in tin plate cans and Cebal Transfer alu-cans. Can use all directional inserts described at page 2.0.02.

V21.97, V21.98, V21.106, V21.107: Orbit spray caps for gel and for foam. Available for necked-in tin plate cans and Cebal Transfer alu-cans. Flow-rate reduction in the seatingof the stem, with Ø 1.0 mm orifice.

V21.93, V21.95, V21.96

V21.97, V21.98, V21.106, V21.107

V21.85, V21.86, V21.92

C

A

B

Ø

C

A

B

Ø

C

A

B

Ø

ORBIT with micromist insert

CODEØ CAN (mm)

A B CTIN PLATE ALUMINUM

V21.92 45 45 43.4 21.6 33.8

V21.85 49 50 47.2 23.4 36.8

V21.86 52 53 47.2 23.4 38.1

ORBIT with directional insert

CODEØ CAN (mm)


V21.93 45 45 43.4 21.6 33.8

V21.95 49 50 47.2 23.4 36.8

V21.96 52 53 47.2 23.4 38.1

ORBIT gel

CODEØ CAN (mm)


V21.97 49 50 47.2 23.4 36.8

V21.98 52 53 47.2 23.4 38.1

ORBIT foam

CODEØ CAN (mm)


V21.106 49 50 47.2 23.4 36.8

V21.107 52 53 47.2 23.4 38.1

2.2.06


ORBIT SPRAY CAP

VISIBLE TAMPER-TAG

UNLIMITED POSSIBILITIES OF COLOUR COMBINATIONS

To meet customer demand, Orbit spray cap is fitted with a newly-developed and visible tamper-tag (guarantee seal)on the rear side of the finger pad.

The spray-channel presents an oval finger pad, together with an oval spray nozzle front: the name Orbit arises from these oval designs.

The separate arrangement of spray-channel finger pad and outer cap offers unlimited possibilities to combine different colours.

To satisfy the increased demand for transparent and trans-lucent colour variations and to ensure transparency, the core of the mould is polished.

COSTER

2.2.07revision: 3

15/02/2015

SFERA SPRAY CAP


Can dimension at page 2.2.02.

V31.28

V31.28: Sfera spray cap for gel with protection overcap V20.103.Suitable for necked-in Ø 52 mm tin plate cans and Cebal Transfer Ø 53 mm alu-cans with BOV valves.Orifice Ø 0.8.

V31.36

40

25

10

Ø 52

V31.29

40

25

10

Ø 52 40

25

10

Ø 52

V31.30

58

33.7

11

.5

Ø 57

V31.30: Sfera spray cap for foam with protection overcap V20.107.Suitable for necked-in Ø 57 mm tin plate cans. Orifice Ø 2.2.

V31.29: Sfera spray cap for foam with protection overcap V20.103.Suitable for necked-in Ø 52 mm tin plate cans and Cebal Transfer Ø 53 mm alu-cans. Orifice equivalent Ø 3.1.

V31.36: Sfera spray cap for gel with protection overcap V20.103.Suitable for necked-in Ø 52 mm tin plate cans and Cebal Transfer Ø 53 mm alu-cans with BOV female valve. Orifice Ø 0.8.

2.2.08


SFERA SPRAY CAP

SFERA STANDARD SPRAY CAPFOR FOAM AND GELSfera spray cap, a member of the vast family of Coster spray caps and actuators,is a very efficient actuator available in two versions, for foam and for gel.

Both of these actuators are equipped with a protection overcap to avoid accidental actuation.

COSTER

2.2.09revision: 0

30/04/2015

NASH SPRAY CAP

FOR PRESS-DOWN VALVESWITH STEM Ø 3.9

V31.8

V31.8: spray actuator with micromist insert and protection overcap V20.83.Suitable for transfer aluminium cansØ max 50 mm. Can use all micromist inserts described at page 2.0.02.

28

44

Ø 46

4

V31.11: anti-perspirant actuator with directional insert and protectionovercap V20.83. Suitable for transfer aluminum cans Ø max 50 mm. Can use all directional inserts described at page 2.0.02.

V31.11

28

44

Ø 46

4

V31.9

V31.9: actuator for gel with protection overcap V20.83. Suitable for transfer aluminum cans Ø max 50 mm. Orifice Ø 1.5.

28

44

Ø 46

4

2.2.10


NASH SPRAY CAP

V20.83: protection overcap.

V20.83

40

Ø 45.7

V31.10: actuator for foam with protection overcap V20.83. Suitable for transfer aluminum cans Ø max 50 mm. Orifice Ø 2.0.

V31.10

28

44

Ø 46

4

COSTER

2.2.11revision: 4

30/04/2015

HYDRA SPRAY CAP


V17.74

V17.66

V17.74: Hydra spray cap with micromist insert; suitable for necked-in Ø 57 mm tin plate cans. Can use all micromist inserts described at page 2.0.02.

V17.66: Hydra spray cap with directional insert; suitable for necked-in Ø 57 mm tin plate cans. Can use all directional inserts described at page 2.0.02.

V18.75: Hydra spray cap without insert,for directional spray (Ø orifice: 0.7 mm);suitable for necked-in Ø 57 mm tin plate cans. For insecticide sprays.

50

32

28

Ø 57

50

32

28

Ø 57

V18.75

50

32

28

Ø 57

2.2.12


HYDRA SPRAY CAP

HYDRA SPRAY CAP FOR INSECTICIDES AND HOUSEHOLD PRODUCTSHydra spray cap is a standard spray cap specifically developed for household and insecticideproducts.

It is produced in a wide range of colours.

Hydra is available in two different versions: two-piece (with micromist insert) and single-piece (with directional hole).

COSTER

2.2.13revision: 0

15/07/2016

DOLOMITE SPRAY CAP

FOR PRESS-DOWN VALVESWITH EUROSTEM Ø 3.3

V21.153

V21.153: spray cap with micromist insert and slider for lock-unlock mechanism.Suitable for necked-in Ø 49 mm tin plate cans. Can use all micromist inserts described at page 2.0.02.25

.5

52.2

Ø 49

V21.154: anti-perspirant cap with directional insert and slider for lock-unlock mechanism. Suitable for necked-in Ø 49 mm tin plate cans. Can use all directional inserts described at page 2.0.02.

V21.154

31.2

25.5

52.2

Ø 49

31.2

2.2.14


DOLOMITE SPRAY CAP

FEATURES Dolomite is a two piece spray cap suitable for 1” male aerosol valves.

It consists of a cap with integrated actuator and a slider.

The slider is ergonomically shaped and activates the lock - unlock mode of the spray cap. The “lock-unlock” writing on the slider helps user to identify the open or close position.

APPLICATIONS Dolomite is suitable for a wide range of products using a micromist or directional insert and is particularly suitable for deodorants and cosmetics.

UNLIMITED COLOURCOMBINATIONS Dolomite can be supplied either in a unique colour combination or using different colours for the cap and the slider, making it easy to adapt and customize to a variety of products.

Documents

VALVES AEROSOL FOR ACTUATORS - coster.com.arcoster.com.ar/en_GB/Download/Catalogue/Actuators-Section.pdf · S T R E S N I L A N O I T C E R I D D R A D N A T S NOTES: actuator V04.804