8
GENERAL APPLICATION The unique rotating disc choke valves have been designed for the upstream segment of the oil and gas market, excelling in applications with high differential pressure and abrasive fluids, including production, high pressure separators and well injection and fracturing applications. They are used in: • Oil and gas production • Level control valve • Blowdown valve • Water injection • Steam injection • Gas injection • Fracturing • Handling drilling fluids • Handling slurry • Gas lift valve VONK CHOKE VALVES MODEL SCV (ANGLE BODY) FEATURES • The standardized forged body and standard flanges ensure short delivery time and lowest cost of ownership. • Field proven extended service life, delivered by a robust but simple rotating disc and bean design. • Low life cycle costs resulting from improved resistance to corrosive and/or abrasive production fluids. • Ease of maintenance and inspection, facilitated by removal of limited internals while valve remains in service. • Operational confidence and safety, guaranteed by repeatable 100% shut-off to Class V ASME FCI-70. • Operational reliability with the capability of handling high pressure drops and delivering precise C v values. • Controlled environmental impact governed by reduced effects of noise and vibration. • Improved pressure recovery performance factor delivered by the unique bean and disc design. Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications TECHNICAL DATA Body material: AISI 4130 Bonnet type: Bolted Body rating: 6000 psig Connections: Flange, hub, thread and butt weld Pressure range: ASME 150 / 2500 API 2000 / 5000 Temperature range: -46 to +250°C -51 to +482°F Body size: NPS 1 to 3 End connections: NPS 1 to 6 Leakage class: Class V acc. ASME FCI-70-2 VCTDS-03222-EN 15/03 © 2015 Pentair plc. All Rights Reserved. www.pentair.com/valves

Valves

Embed Size (px)

DESCRIPTION

valves

Citation preview

Page 1: Valves

General application

The unique rotating disc choke valves have been designed for the upstream segment of the oil and gas market, excelling in applications with high differential pressure and abrasive fluids, including production, high pressure separators and well injection and fracturing applications.

They are used in:• Oil and gas production• Level control valve• Blowdown valve• Water injection• Steam injection• Gas injection• Fracturing• Handling drilling fluids• Handling slurry• Gas lift valve

Vonk CHOke VaLVeSModel SCV (Angle Body)

Features

• The standardized forged body and standard flanges ensure short delivery time and lowest cost of ownership.

• Field proven extended service life, delivered by a robust but simple rotating disc and bean design.

• Low life cycle costs resulting from improved resistance to corrosive and/or abrasive production fluids.

• ease of maintenance and inspection, facilitated by removal of limited internals while valve remains in service.

• Operational confidence and safety, guaranteed by repeatable 100% shut-off to Class V aSMe FCI-70.

• Operational reliability with the capability of handling high pressure drops and delivering precise Cv values.

• Controlled environmental impact governed by reduced effects of noise and vibration.

• Improved pressure recovery performance factor delivered by the unique bean and disc design.

Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications

technical data

Body material: aISI 4130Bonnet type: BoltedBody rating: 6000 psigConnections: Flange, hub, thread and

butt weldPressure range: aSMe 150 / 2500 aPI 2000 / 5000 Temperature range: -46 to +250°C -51 to +482°FBody size: NPS 1 to 3end connections: NPS 1 to 6Leakage class: Class V acc. aSMe FCI-70-2

Vctds-03222-en 15/03© 2015 Pentair plc. all Rights Reserved.www.pentair.com/valves

Page 2: Valves

2

Vonk CHOke VaLVeSModel SCV (Angle Body)

Valve specificationValve model SCVBody type Right angleBody rating 425 barg / 6000 psigInlet connection See dimension tablesOutlet connection See dimension tablesBonnet type BoltedBody/bonnet material See "material options"Stem material Duplex (standard)Trim material Tungsten carbideFlow charateristic LinearSeat tightness Class V

product oVerView

The choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability in the most challenging oil and gas applications as the industry copes with extreme operating conditions and remote operating environments. The SCV model is designed as an angle body configuration and is available from NPS 1 to NPS 3 body sizes, incorporating engineered rotating disc trim technology which minimizes wear while maximizing controllability and guaranteeing positive shut-off service. Our choke valve range is highly versatile and is designed with an ISO top flange for easy automation. The forged standardized bodies ensure a high body integrity. The standardized forged body and standard flanges ensure short delivery time and lowest cost of ownership.

FlanGes

aSMe flanges can be delivered with:• Raised face, stock finish• Raised face, smooth finish• RTJ groovesDimensions are given in mm, weights are approximate in kgs of bare valve. Other sizes are available on request.Standard end-to-end dimensions are available. On request, the build-in dimensions can be modified to customer specification.

Materialstemperature class

PU -29 / 121°C -20 / 250°FLU -46 / 121°C -51 / 250°F

certification levelPSL 1PSL 2PSL 3

Materialsapi 6a material class

aa BB dd eeBody aISI 4130 aISI 4130 aISI 4130 aISI 4130Bonnet aISI 4130 aISI 4130 aISI 4130 aISI 4130Stem Duplex Duplex Duplex DuplexBolting aSTM a320 L7M aSTM a320 L7M aSTM a320 L7M aSTM a320 L7MFront disc Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbideBean Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide

Protective bushing

Turning fork

Front disc

Bean

Page 3: Valves

3

C

B

A

C

B

A

NPS 1 aSMe 300 RF 171 6.73 222 8.74 183 7.20 37 82(DN 25) aSMe 600 RF 178 7.01 229 9.02 183 7.20 37 82

aSMe 600 RTJ 177 6.98 228 8.99 183 7.20 37 82aSMe 900 RF 189 7.44 240 9.45 183 7.20 43 95aSMe 900 RTJ 188 7.42 239 9.42 183 7.20 43 95aSMe 1500 RF 189 7.44 240 9.45 183 7.20 44 96aSMe 1500 RTJ 188 7.42 239 9.42 183 7.20 44 96aSMe 2500 RTJ 204 8.05 255 10.05 183 7.20 47 103

NPS 2 aSMe 300 RF 179 7.05 237 9.33 183 7.20 42 92(DN 50) aSMe 600 RF 189 7.44 247 9.72 183 7.20 44 97

aSMe 600 RTJ 190 7.48 248 9.76 183 7.20 44 97aSMe 900 RF 218 8.58 276 10.87 183 7.20 59 130aSMe 900 RTJ 219 8.62 277 10.90 183 7.20 59 130aSMe 1500 RF 218 8.58 276 10.87 183 7.20 60 131aSMe 1500 RTJ 219 8.62 277 10.90 183 7.20 60 131aSMe 2500 RTJ 244 9.60 302 11.89 183 7.20 75 164

NPS 3 aSMe 300 RF 189 7.44 247 9.72 183 7.20 49 109(DN 80) aSMe 600 RF 199 7.83 257 10.12 183 7.20 52 116

aSMe 600 RTJ 200 7.87 258 10.15 183 7.20 52 116aSMe 900 RF 218 8.58 276 10.87 183 7.20 66 146aSMe 900 RTJ 219 8.62 277 10.90 183 7.20 66 146aSMe 1500 RF 233 9.17 291 11.46 183 7.20 79 173aSMe 1500 RTJ 234 9.21 292 11.49 183 7.20 79 173aSMe 2500 RTJ 287 11.28 345 13.56 183 7.20 123 270

2 1/16" aPI 2000 190 7.48 248 9.76 183 7.20 45 100aPI 3000 219 8.61 277 10.89 183 7.20 59 130aPI 5000 219 8.60 277 10.89 183 7.20 60 131

3 ⅛" aPI 2000 200 7.87 258 10.16 183 7.20 54 119aPI 3000 219 8.60 277 10.89 183 7.20 65 143aPI 5000 234 9.23 292 11.51 183 7.20 80 175

Vonk CHOke VaLVeSModel SCV (Angle Body)

standard diMensions and end connections 1” Body sizeconnection type class

a ±2 B±2 c weightmm inch mm inch mm inch kg lbs.

Page 4: Valves

4

C

B

A

C

B

A

NPS 2 aSMe 300 RF 199 7.83 257 10.12 221 8.70 63 138(DN 50) aSMe 600 RF 209 8.23 267 10.51 221 8.70 65 142

aSMe 600 RTJ 210 8.26 268 10.55 221 8.70 65 142aSMe 900 RF 238 9.37 296 11.65 221 8.70 79 174aSMe 900 RTJ 239 9.41 297 11.69 221 8.70 79 174aSMe 1500 RF 238 9.37 296 11.65 221 8.70 80 175aSMe 1500 RTJ 239 9.41 297 11.69 221 8.70 80 175aSMe 2500 RTJ 264 10.39 322 12.67 221 8.70 95 209

NPS 3 aSMe 300 RF 209 8.23 267 10.51 221 8.70 70 155(DN 80) aSMe 600 RF 219 8.62 277 10.91 221 8.70 73 161

aSMe 600 RTJ 220 8.66 278 10.94 221 8.70 73 161aSMe 900 RF 238 9.37 296 11.65 221 8.70 87 191aSMe 900 RTJ 239 9.41 297 11.69 221 8.70 87 191aSMe 1500 RF 253 9.96 311 12.24 221 8.70 99 218aSMe 1500 RTJ 254 10.00 312 12.28 221 8.70 99 218aSMe 2500 RTJ 307 12.07 365 14.35 221 8.70 143 315

NPS 4 aSMe 300 RF 215 8.46 283 11.14 221 8.70 79 174(DN 100) aSMe 600 RF 238 9.37 306 12.05 221 8.70 93 205

aSMe 600 RTJ 239 9.41 307 12.08 221 8.70 93 205aSMe 900 RF 250 9.84 318 12.52 221 8.70 105 231aSMe 900 RTJ 251 9.88 319 12.56 221 8.70 105 231aSMe 1500 RF 260 10.24 328 12.91 221 8.70 121 267aSMe 1500 RTJ 261 10.27 329 12.95 221 8.70 121 267aSMe 2500 RTJ 330 13.00 398 15.67 221 8.70 185 408

2 1/16" aPI 2000 210 8.27 268 10.55 221 8.70 66 146aPI 3000 239 9.39 297 11.68 221 8.70 80 177aPI 5000 239 9.39 297 11.67 221 8.70 80 177

3⅛" aPI 2000 220 8.66 278 10.94 221 8.70 75 164aPI 3000 239 9.39 297 11.67 221 8.70 86 190aPI 5000 254 10.02 312 12.30 221 8.70 100 221

4 1/16" aPI 2000 239 9.41 307 12.09 221 8.70 93 204aPI 3000 251 9.89 319 12.57 221 8.70 104 230aPI 5000 261 10.27 329 12.94 221 8.70 122 269

Vonk CHOke VaLVeSModel SCV (Angle Body)

standard diMensions and end connections 2” Body sizeconnection type class

a ±2 B±2 c weightmm inch mm inch mm inch kg lbs.

Page 5: Valves

5

C

B

A

C

B

A

NPS 3 aSMe 300 RF 249 9.78 342 13.44 305 12.01 168 369(DN 80) aSMe 600 RF 259 10.18 352 13.84 305 12.01 171 376

aSMe 600 RTJ 259 10.21 352 13.87 305 12.01 171 376aSMe 900 RF 278 10.93 371 14.59 305 12.01 185 407aSMe 900 RTJ 278 10.96 371 14.62 305 12.01 185 407aSMe 1500 RF 293 11.52 386 15.18 305 12.01 197 433aSMe 1500 RTJ 293 11.55 386 15.21 305 12.01 197 433aSMe 2500 RTJ 346 13.62 439 17.28 305 12.01 241 530

NSP 4 aSMe 300 RF 255 10.02 353 13.88 305 12.01 178 392(DN 100) aSMe 600 RF 278 10.93 376 14.78 305 12.01 192 423

aSMe 600 RTJ 278 10.96 376 14.82 305 12.01 192 423aSMe 900 RF 290 11.40 388 15.26 305 12.01 204 450aSMe 900 RTJ 290 11.43 388 15.29 305 12.01 204 450aSMe 1500 RF 300 11.79 398 15.65 305 12.01 220 485aSMe 1500 RTJ 300 11.83 398 15.69 305 12.01 220 485aSMe 2500 RTJ 370 14.55 468 18.41 305 12.01 284 626

NPS 6 aSMe 300 RF 268 10.53 378 14.86 305 12.01 197 434(DN 150) aSMe 600 RF 293 11.52 403 15.85 305 12.01 229 505

aSMe 600 RTJ 293 11.55 403 15.88 305 12.01 229 505aSMe 900 RF 316 12.42 426 16.75 305 12.01 258 568aSMe 900 RTJ 316 12.46 426 16.79 305 12.01 258 568aSMe 1500 RF 347 13.64 457 17.97 305 12.01 303 667aSMe 1500 RTJ 349 13.74 459 18.07 305 12.01 303 667aSMe 2500 RTJ 454 17.88 564 22.21 305 12.01 501 1103

3⅛" aPI 2000 260 10.22 353 13.88 305 12.01 173 380aPI 3000 278 10.94 371 14.61 305 12.01 184 405aPI 5000 294 11.57 387 15.23 305 12.01 198 435

4 1/16" aPI 2000 279 10.96 377 14.82 305 12.01 193 425aPI 3000 291 11.46 389 15.31 305 12.01 204 450aPI 5000 300 11.82 398 15.68 305 12.01 222 489

7 1/16" aPI 2000 295 11.59 405 15.93 305 12.01 233 513aPI 3000 316 12.44 426 16.78 305 12.01 258 568aPI 5000 350 13.76 460 18.09 305 12.01 315 693

Vonk CHOke VaLVeSModel SCV (Angle Body)

standard diMensions and end connections 3” Body sizeconnection type class

a ±2 B±2 c weightmm inch mm inch mm inch kg lbs.

Page 6: Valves

6

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

6.5

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100

Cv

12.5 mm8 mm

25 mm18 mm

0

3

6

9

12

15

18

21

24

27

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100

Cv

0

100

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100

35 mm50 mm

Cv

90

80

70

60

50

40

30

20

10

8 21 2.6 2.312.5 32 6.5 5.6

18 45 13 11.525 64 27 23.4

35 88 50 43.350 128 103 89.2

Vonk CHOke VaLVeSModel SCV (Angle Body)

oriFice diaMeters and cv Values 1" Bodyorifice (mm) Bean size Max cv Max kv

1" VaLVe CHaRaCTeRISTICS

active turning angle %

active turning angle %

2" VaLVe CHaRaCTeRISTICS

active turning angle %

3" VaLVe CHaRaCTeRISTICS

oriFice diaMeters and cv Values 2" Bodyorifice (mm) Bean size Max cv Max kv

oriFice diaMeters and cv Values 3" Bodyorifice (mm) Bean size Max cv Max kv

Page 7: Valves

7

AA

SECTION A-A SCALE 1 : 3

2

4

5

6

7

10

12

13

11

14

15

16

3

9

8

1

A

B

C

pos. no parts1 Body2 Bean3 Seal body-bonnet4 Front disc5 Bearing6 Protecting bush7 Turning fork8 Stem seal9 Seal body-bonnet10 Spring11 Bearing12 Studs and nuts13 Bearing14 Bearing15 Bonnet16 Bonnet shaft

Vonk CHOke VaLVeSModel SCV (Angle Body)

actuation options• Manual• Pneumatic• Hydraulic• electric• Pneumatic stepping• Hydraulic stepping• electro-hydraulicOther actuator available upon request

handwheel mounting position a. optional B and c are also possible.

Page 8: Valves

8

pentair ValVes & controlswww.pentair.com/valves

all Pentair trademarks and logos are owned by Pentair plc. all other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change product designs and specifications without notice. Pentair is an equal opportunity employer. © 2015 Pentair plc. all rights reserved.