Valmont® Irrigation has a policy of continuous product improvement and development. As a result, certain changes in standard equipment, options, price, etc., may have occurred after the publication of this bro-chure. Some photographs and specifications may not be identical to current production. Your local Valley® dealer is your best source for up-to-date information. Valmont Irrigation reserves the right to change product design and specification at any time without incurring obligations.

©2013 Valmont Industries, Inc., Valley, NE 68064 USA. All rights reserved. 07/13

See your local authorized Valley Dealer:

Reduce Your Risk For:

• Downtime• Crop loss• Expensive repairs later

We have the program that meets your machine’s age and needs. Call us today!

Certified PreventativeMaintenance Program

Reduce Your Riskof an In-SeasonBreak Down.We can make it easy.

Schedule Your Preventative Maintenance Today.

WWW.HERITAGETRACTOR.COM

2701 NW Hwy 24Topeka, KS 66618

Two Star Program

Includes ALL One Star Program checks Plus:

Pivot Point / Incoming Power Checks:✔ Visually check pivot contactors for arcing ✔ Placement of screens / shields on generator, pump panel and electric pump motors

Spans / Alignment Checks:✔ Visual inspection of nuts/bolts and structural members ✔ Control arm is clear of obstacles✔ Visually inspect tower box contactors✔ Inspect tower box covers for damage & proper latch-ing

Drive Unit Checks:✔ Inspect wheel gearbox input & output seals✔ Proper tightness of gearbox mounting bolts✔ Visually inspect gear motor seals✔ Motor lead cable condition & properly secured✔ Inspect all span ball and socket joints✔ Proper tightness of wheel lug nuts✔ Inspect towable basebeams for structural integrity✔ Check towable hubs for wear

Three Star Program

Includes ALL One Star Program checks and Two Star checks and the following:

Pivot Point / Incoming Power Checks:✔ Inspect collector ring brushes✔ Inspect condition of pivot riser pipe gasket seal✔ Generator belts for proper tension

Spans / Alignment Checks:✔ Power cable condition✔ Tower box bearings for proper cam movement ✔ Proper safety micro switch position ✔ Overhang cable inspection ✔ Visually check and re-align the machine if needed

Drive Unit Checks:✔ Flex joint boot condition and tighten bands as required✔ Gearbox output shaft bearings & back lash ✔ End-of-field stop/autoreverse proper cam adjustments✔ Inspect connections in centerdrive junction box and drain holes

One Star ProgramPivot Point / Incoming Power Checks:✔ Grease pivot swivel✔ Collector ring electrical connections & drainage✔ Drain pivot and spans✔ Anchor bolts or chains✔ Pivot point nuts and bolts for proper tightness✔ Running light operation check✔ Inspect for ground rod at each tow location✔ Air pressure in towable pivot tires✔ Visual inspection for proper equipment grounding✔ Electrical connections: control panel & cord connectors✔ Proper size fuses✔ Proper installation of incoming power wires✔ Proper operation of auxiliary contacts on main disconnect✔ Operation of pump shutdown circuit✔ Relays are securely seated in socket bases✔ Cables are securely seated in connectors

Spans / Alignment Checks:✔ Span pipe drains inspected / seals flipped over✔ Pull sand trap, drain, clean and re-install✔ Drain booster pump✔ Grounding between towers✔ Check safety shutdown✔ Inspect tower box for any loose wire connections & cord connectors

Drive Unit Checks:✔ Check oil and drain water in wheel and centerdrive gearboxes✔ Check gearbox ventilation hole in expansion chamber✔ Inspect drive shaft shield placement✔ Tire air pressure✔ Grease towable hubs

Heritage Tractor Valley® Certified Preventative Maintenance Programs.

If needed, we will provide a quotation for parts and

service recommended.

Call Today!

$40 / Drive Unitadd $85 / Corner Arm

$50 / Drive Unitadd $85 / Corner Arm

$60 / Drive Unitadd $85 / Corner Arm

WWW.HERITAGETRACTOR.COM

2701 NW Hwy 24Topeka, KS 66618

Contact Bruce Engler - 785-506-5456 or bengler@heritagetractor.com