Upload
thermaltechnologies
View
219
Download
0
Embed Size (px)
Citation preview
8/2/2019 Valley Panel Datasheet
1/1
DATA SHEET
HEATED vAllEy/UTiliTy PAnEl
(866) 635-8123
www.therma1.m
T-Panels can be
installed on new
or exisng roofs.
he T-Panel System melts and pre-
ents property-damaging ice dams,
he formaon of dangerous icicles
nd heavy snow load. Theres no
onger a need to shovel and scrape
way snow and ice.
Heat Cable channels are
designed to hold 11mm
or 13 mm cables.
HEATED vAllEy PAnElThis panel is 2 wide and can be custom cut to t the length of your roofs valleyor guer. Thermal Technologies innovave roof snow and ice eliminaon systems
are aracve and cost eecve. They ensure that the buildings owner will not have
the frustraon, property damage, and costs associated with ice dams and water
damage, caused by the inability of roofs to drain water during winter months. Thermal
Technologies revoluonary roof de-icing systems will extend the life of your roof and
reduce the destrucve situaons that snow and ice can inict on any roof.
SPEcificATionSMaterial Selecon Recycled Aluminum Alloy 6063 Temper - T5
Color Spray Powder Coang Colors
Panel Size 2 x 6Designed to eliminate snow blockage and ice
dams in guers and valleys.
Heang Systems Commercial Grade-Self Regulang Heat Cable (in 100-
130 VAC or 208-277 VAC). The T1 System requires 2 feet
of Heat Trace per foot of panel. Designed for 11mm or
13 mm heat cables.
Components The 2 (T1) Heated Eave Panel System Includes Alumi-
num Alloy Snap-Loc Top, Aluminum Alloy Base Panel
Oponal Items Ambient and/or Moisture Sensor Controllers,
self-regulang heat trace for guers and downspouts
Electrical
Requirements
N.E.C. 426-28 requires 30 mA Ground Fault circuit
protecon for snow and ice melng applicaons