SIMPLE OPERATING INSTRUCTIONS

Vacuum SealerCrenova V60PLUS Vacuum Sealer User Guide

How to close the lid?Press hard on two sides of the lid.

How to open the lid?Press the Lid Lock Release Button

on both sides to open the lid.

1

1.Place bag material under the rail bar.

2. Slide the built-in trimmer to cut enough bag material.

3. Place one end of bag material into vacuum channel (across sealing strip).

4. Close the lid;

5. When the indicator light of Single Seal is off, open the lid.

Press Single Seal Button to seal. 1

2

Make a Vacuum Bag

Single Seal

1

2

3

4

5

Note:the default setting is Dry Food Mode

Vacuum Seal &Cancel

Vacuum Seal &Cancel

FOOD

Blue Dry

Red Wet

FOOD

Blue Dry

Red Wet

1

2

Vacuum Seal Your Food

For Dry Food

2. Press the Vacuum Seal & Cancel Button, to vacuum seal the food. (Press again to cancel the vacuum sealing process.)

with blue indicator light.

1. Place open end of bag into vacuum channel.

3. When the indicator light of VacuumSeal & Cancel Button is off, open the lid.

1. Place open end of bag into vacuum channel.

2. Press the Food Button until the red indicator light is on.

Press the Vacuum Seal & Cancel Button to vacuum seal the food.

(Press again to cancel the vacuum sealing process.)

3. When the indicator light of Vacuum Seal & Cancel Button is off, open the lid.

For Juicy Food

2

1

2

3

1

2

3

Vacuum Seal &Cancel

ManualVacuum

Single seal

3

For Soft Food and Crisp Food

For Soft Food

2. Press the Mode Button, and the red indicator light is on.

Press the Vacuum Seal & Cancel Button to vacuum seal the food.

(Press the button again to cancel the vacuum sealing process.)

1. Place your food in bag, place open end of bag into vacuum channel.

3. When the indicator light of VacuumSeal & Cancel Button is off, open the lid.

1

2

For Crisp Food

2. Press and hold the Manual Vacuum Button to vacuum the food, release the button to stop vacuuming process.

1. Place open end of bag into vacuum channel.

3. Press the Seal Button to seal the bag.

1

2

3

1

2

3

MODE

Blue

Red Soft

Vacuum Seal &Cancel

4

Vacuum Seal with Accessories

1. Connect the vacuum container to your vacuum sealer using a vacuum hose.

3. Then remove the hose from vacuum sealer.

Remove hose from vacuum container first.

2.Press the Vacuum Seal & Cancel Button to start vacuum process, the vacuuming process is done after the

indicator light is off.

1

2

1

2

1

2

3