Upload
joymoti
View
215
Download
0
Embed Size (px)
Citation preview
8/10/2019 VA18 VA19
1/59
11/0.1.0 Rev2 0917
highe
rtem
pera
ture
s&
press
ures
Asubsidiaryo f International, I nc.
The Energy-Efficiency Leader!
Q.
D.
QuickD
eliv
eryP
rogra
m
8/10/2019 VA18 VA19
2/59
Q
uestio
ns?......SOLUTIONS FM & CE Approved
Solenoid Isolatedfrom corrosive, hightemperature or
fla mma b le med ia
No Minimum Pressureor flow required tooperate
Greater Forcea nd low torq ue of rota rysha ft ea s ily opens a ga insthig her pres s ures
Quick Actingw ithout a ir a s s is t
Manual Open/CloseOverride with visualposition indicator
Slight Rotary Motionmeans virtually noma intenanc e needed
Heavy Return Spring(s)provide positive closurea nd stay c losed a ga instmoderate backpressure
QUICK
DELIVER
Y
Q.D.
LESLIE (QD) QUICK DELIVERY PROGRAMS
QD - Guaranteed to ship in 5 working days or less
QD Premium - Guaranteed to ship in 24 hours or less
Ma n y sta n d a rd re p l a ce me n t p a rts a va i la b l e
th ro u g h th e QD a n d QD Pre mi u m p ro g ra ms.
Wide Flexibilityin mod es of a ctuation
Fail-Safe Shutoffprovided by pressure and
flow on los s of pow er
Optional Soli-Con
Actuator: Full voltage initial pulse
provide s a mple pow erto open
Reduced voltage aftersplit-second is sufficientto hold valve open prevents burnout frommec ha nic a l o verloa d
Rush Delivery ProgramsQD and QD Premiumdelivery available for
ma ny of our sta nda rdconfigurations.
Questio
ns?......SOLUTIONS
8/10/2019 VA18 VA19
3/59
RotaryOn-OffControl
Valves
Rotary
On-OffControlValves
HeatActuated
ElectricActuated
Pneumatic/
HydraulicActuated
APPLI CATI ONS
Dirty, viscous or unclean liquids
Fuel oils, gasoline, lube oils,fuel ga ses
Stea m, superheated s team,
ho t g as e s
All waters including seawater
So lvents, a mmonia, Halon, C O2
Air vacuum, inert gases, hydrogen,oxygen, helium
VALVE OPTI ONS
Heavy duty position switch(es) Manual override locking device
Molded coils
Gravity assist to fail position
Termina l b loc ks
External linka ge co ver
Overload relay
Seismic resisting construction
Limited space mountingorientations
Trip d ela y d evice s
U.S. Navy shock &vibrationres isting co nstruction
Materials traceability;c ertific a tion to MIL-I-45208
EL ECTRI C ACTUATOR
OPTI ONS
Wea the rproo f
Watertight
FM Approved Explosion Proof
(Class I, Groups A, B, C or D;
Cla ss II, G roups E, F or G;
Division 1 or 2)
8/10/2019 VA18 VA19
4/59
2
It is solely the responsibility of the system designer and the user to select products and materials suitable for their specific application
requirements and to ensure proper installation, operation and maintenance of these products. Assistance shall be afforded with the
selection of the materials based on the technical information supplied to Leslie Controls, Inc.; however, the system designer and user
retain final responsibility. The d esigner should consider applicable Cod es, material comp atibility, prod uct ratings and application details
in the selection and application. Improper selection, application or use of the products described herein can cause personal injury or
property damage. If the designer or user intends to use the product for an application or use other than originally specified, he must
reconfirm that the selection is suitable for the new operating conditions.
TABLE OF CONTENTS
2
LAURENCE ROTARY ELECTRIC ON-OFF CONTROL VALVES
TWO WAY
2500 S e rie s 3
S eries 500, 550, 600 Normally Closed 11
S eries 700, 700HP, 800 Norma lly C los ed , No Voltag e Trip, Ma nual Res et 15
S eries 750, 750HP, 850 Normally Open, No Voltag e Trip, Manua l Reset 19
S eries 1100, 1100HP, 1200 Normally Close d, Elec tric Trip, Ma nual Res et 23
S eries 1150, 1150HP, 1250 Normally Ope n, Elec tric Trip, Ma nual Res et 27
Series CY500, CY600 Cylinder Operated 39
THREE WAY
Series 3300 Fully Electrical 31
Series 3400, 3500 Manual Reset 35
Series 3450 for Diverting 39
ACTUATORSSoli-Con Actuator Dimensions 39
Solenoid Actuator Dimensions 40
S ELECTING /S P EC IFYING
Actuato rs S p e c S h e e t 43
3-Way F lo w F o rm s 44
Electric On-Off Control Va lves S pec S heet 45
LAURENCE FIRE-CIDE FM APPROVED HEAT ACTUATED VALVES
2800 S eries &S eries 1700/1800 47
3-Way F lo w F o rm s 52
Fire-Cide Series Valves S pec S heet 53
LAURENCE COMBUSTION TURBINE VALVES
Compressed Air Extrac tion Valve ba ck cover
Atomizing Air Bypas s Valve b a ck cover
LESLIE CONTROLS, INC. has a policy of continuous product research a nd improvement and reserves the right to change design a nd
specifications without notice. Responsibility for typographical errors is specifically disclaimed.
8/10/2019 VA18 VA19
5/593
2 5 0 0 S E R I E SELECTRICACTUATED,
FASTACTING,PROCESSFLUID,
SHUT-OFFVALVES
8/10/2019 VA18 VA19
6/59
2 5 0 0 S ERIE S - E LECTRICALLY ACTUATED S HUTOFF VALVE
ROTARY SHAFT
FAST DELIVERY- This m od ula r des ign provide s theca pab ility to stoc k valve components that c an b eassembled and shipped quickly.
FIELD REVERSIBILITY- The 2500 se ries is de signedwith versatility in mind. In order to adapt to changingprocess conditions, the valve action can be reversedwhile it rema ins in the pipeline. The o peration ma y b echanged from normally closed to normally opened with akit or vice versa.
SWITCH KITS - The 2500 series valves c an be fitted withad d on va lve po sition indication sw itch kits in the field.
Heavy duty po sition s witches in NEMA 4 a nd explos ionproof enclosures are featured.
FACTORY MUTUAL SYSTEMS APPROVEDEXPLOSION-PROOF - This s eries fea tures fully electricalvalves that are FM approved for safety shut-off of fuel oilsand gases. In addition, this series features FM approvedac tuators w here explosion-proof approval is required:Class I, Groups B, C, &D, Division 1, and Class II GroupsE, F, &G , Division 1 e xplosion proof; a nd NEMA 4watertight actuator enclosure with 1/2 NPTconduitconnection.
SPECIAL FEATURES
Tef lon
is a registered tradema rk of E.I. Dupont de Nemours Co.,Inc.
Series 2500 valves are 2-way, globe-type, piston valves.They a re operated by an external lever co nnecting the liftingac tion o f the linea r ac tuator to the va lve piston/plug througha rota ry shaft. The Rota ry Sha ft principle c rea tes a mec han-ical advantage enabling more force in operating the valve. Italso allow s stronger return spring ac tion to ensure reliab le,fail-sa fe return.
Isolated actuator: In the Rotary Shaft valve, the fluid iscontained in the lower valve body assembly, completelyaw ay from the e lectrica l portion of the valve. Therefore,there is no possibility of explosive gas or corrosive liquidlea king into the electrica l enclosure, as there is in a nypackless type solenoid valve.
High temperature capability: Because the magneticplunger and the so lenoid are mounted outside and aw ayfrom the va lve b od y, up to 425 F fluid temperature,including steam, can be safely handled without coil
insulation breakdown which is often associated withpackless type solenoid valves.
Quick acting, two position: S peed of operation is less thanone second and is independent of line-media conditions.
Manual operation provision: In case o f an emergency o r
for trial operation, the valve may be operated by hand usingthe external lever.
Visual position indication: The exte rnal lever a lso s ervesas a visual po sition indicator.
Corrosion resistant materials: All internal parts are madefrom 316 stainless steel.
Highpressurecapability:The mecha nica l ad vantag eprovided by the external lever of the rotary sha ft type ena blesthe valve to be fitted w ith a much s tronger c losure spring tha nis possible with any direct lift packless type solenoid valve.This a llow s a much higher ope ning p res sure and /or a g rea terfactor of s afety for opening a nd c losing the valve.
Much longer maintenance-free life: The s lig ht a rc (15-
30) of the rotary sha ft offers superior sea l life expec tanc ycompared to reciprocating-stem packing glands.
Dependable shutoff: P ressure and flow (ab ove the sea t)tending to close the va lve a chieves s hutoff reliab ility notpossible with ball, gate, or butterfly type valves.
Zero pressure operation: Valve is no t de pende nt onpress ure o r flow to o pen o r close fully.
No tinyorifices: These valves contain no dia phra g ms ,needle-sized orifices or piston rings typical of packlesst ype s o lenoid va lves w hich a re prone t o c logg ing.
Heavywalled valve bodies: All valves have heavy wa lledca st b odies w hich meet the ANSI ratings of class 150 &300 for steel.
A Doubled Seal System: Ensures an absolute minimum offugitive emiss ions. The prima ry s ea l is Teflon
with a springload ed, s econda ry s eal (see drawing below).
4
8/10/2019 VA18 VA19
7/59
2500 SERIES VALVE
PISTON OPTIONS
OPTION D - Direct Operated for Low Pressures
This series ca n be used for visc ous or dirty fluids as well a s
light liq uids and ga ses . These a re Direct Operated valves;
referring to the inner valve c ons truction w here t he full area valve
disc is lifted off the seat against the full inlet shutoff pressure.
This is d one w ithout the a id o f a p res sure as sist from the med ia
or b y a n interna l pilot or minimum flow req uirement. These
valves open a nd c los e, q uickly a nd fully, d ow n to z ero ps i.
Closing speed is essentially independent of fluid viscosity, line
press ure or pressure d rop a cross valve.
OPTION P - Pilot Operated for Clean Gases or Light Liquids
Use this series for light liquids (less than 200 SSU) and clean
ga ses in higher press ure a pplica tions than the D series.
Thes e a re S emi Direct Opera ted va lves. The a ctua tor lifts the
first stage port relieving the static line pressure on top of the
ma in pisto n. This relief crea tes a press ure imba la nce due to
inlet and outlet area size differences which assist in lifting the
pisto n off the s ea t, o pening the va lve fully. The first sta ge is
co nnecte d to the pisto n w ith a n a uxilia ry spring. Therefore, it is
ess entially the a ctuato r that provides a lifting a ction and not the
press ure imbalance. C onseq uently, there is no d ependence on
press ure or flow to op erate the va lve. This a llow s the va lve to
ac t a s Direct Operated dow n to zero psi compared to that ofmost pilot o pera ted or dia phra gm valves with needle s ized
orifices. Moreover, this allows the valve operation to be positive
and quick.
OPTION S - Semi-Direct Operated for Dirty/Viscous Liquids
Use this series for viscous or dirty liquids in higher pressure
a pplica tions than the D s eries . These a re S emi Direct
Operated valves. The a ctua tor lifts the full area disc off the
seat with the assistance of the pressure of the media. Because
the piston is c onnected to the ac tuator and not f loa ting, the
valve operation is pos itive a nd q uick. This a lso a llow s the va lve
to a ct a s Direct Operated a t low press ures d own to zero
psig. Visc ous or unclea n liq uids ca n b e ha ndled relia bly
because the first stage valve port is 25 to 50% of the main
port diameter; as compared to needle sized orifices of most
pilot operated valves.
Note: This opt ion is for use w ith liq uids only.
5
8/10/2019 VA18 VA19
8/59
2500 SERIES DIMENSIONS
Size & C onnections Max. Opening Diff. Press. (psi) Dimensions
Pipe/ Net
Port Direct (D) Pilot (P) Semi-Direct (S) Wgt. A B C D
Suffix (in.) Ends CV Metal Teflon Metal Teflon Metal Teflon (lbs.) (in.) (in.) (in.) (in.)
05 1/2 FNP T 3 300 300 720 300 N/A N/A 13 4 10-3/4 10 5-1/2
05 1/2 150FL 3 275 275 275 275 N/A N/A 15 4-1/4 10-3/4 10 5-1/2
05 1/2 300FL 3 300 300 720 300 N/A N/A 17 5-1/2 10-3/4 10 5-1/2
08 3/4 FNP T 6.8 135 135 720 270 600 270 13 3-1/2 10-3/4 10 5-1/208 3/4 150FL 6.8 135 135 275 270 275 270 15 4-7/8 10-3/4 10 5-1/2
08 3/4 300FL 6.8 135 135 720 270 600 270 17 7 10-3/4 10 5-1/2
10 1 FNP T 10 75 75 720 240 250 240 17-1/2 4 11-1/2 10 5-1/2
10 1 150FL 10 75 75 275 240 250 240 17-1/2 5-1/8 11-1/2 10 5-1/2
10 1 300FL 10 75 75 720 240 250 240 19 5-1/2 11-1/2 10 5-1/2
15 1-1/2 FNP T 22.5 25 25 400 285 125 125 25 7 12 10 5-3/4
15 1-1/2 150FL 22.5 25 25 275 275 125 125 26 6-1/2 12 10 5-3/4
15 1-1/2 300FL 22.5 25 25 295 285 125 125 47 7-1/2 12 10 5-3/4
20 2 FNP T 40 30 30 600 220 375 220 45 10-3/4 15 7 7
20 2 150FL 40 30 30 275 220 275 220 45 10 15 7 7
20 2 300FL 46 30 30 600 220 375 220 90 10-1/2 15 9 730 3 150FL 90 10 10 275 150 165 150 108 9-7/8 17-1/2 10 7
30 3 300FL 96 10 10 440 150 165 150 120 11-3/4 19-1/2 12 7
40 4 150FL 160 5 5 275 115 110 110 138 11-3/4 18-1/2 11-3/4 7
40 4 300FL 160 5 5 330 115 110 110 174 14 18-1/2 12-1/2 7
Dimensions do not show optional features such as position switch kits or manual reset (C dimension increases up to
2-1/2 inches ). P ress ures are ba sed on ANSI ratings at 100 F.
MOUNTING NOTE:All 2500 Series valves must be mounted with the solenoid in a vertical, upright
pos ition. Va lve bo dies a re to be mounted in a horizonta l pipeline. For mounting in vertica l pipeline
or any other pipeline orientation, please consult the factory.
6
8/10/2019 VA18 VA19
9/59
2500 SERIES ACTUATORS
SOLI-CONSOLENOID ACTUATORS
The S oli-Co n solenoid ac tuator is a solid-sta te-
co ntrolled electric a ctua tor, w hich effectively
eliminates coil burn-out due to mechanical overload.The s olid-sta te-controller a cts a s both a timer a nd
electrica l signa l co nditioner. Upon ene rgizing
(applying an electrical signal), the timing circuit
de livers a n inrush current s pike to the c oil to pull-
in the plunger (armature) and operate the valve.
After approxima tely a half sec ond (~ 500 ms), the
circuit drops the current to the coil to a small fraction
of an amp holding the plunger magnetically in its
new position. Actual c urrent d epends upon voltag e
a nd a ctuato r size (model); s ee ta ble below. The
conditioning circuit regulates the voltage and current
delivered to the coil allowing for greater voltagerang es a nd eliminat ing AC hum a nd c hatt er. This
low ers t he c oil tempera ture rise , resulting in longer
coil life, while also saving energy and maintenance
cos ts. Add itionally, should the valve b e operated in
exces s press ure o r blocked, the co il will not b e
d a m a g e d .
Model1 H old in g (a m p s ) In ru s h2(a m ps ) C yc le s3 per minute Voltag e (volts/hertz)
S C B 0.2 14.2 3 120/60 (Z)
S C B 0.17 7.5 3 220/60 (X)
S C E 0.04 13.5 3 125/DC (Y)
S C E 0.04 6.4 3 250/DC (W)
S C G 0.8 14.0 2 24/DC (V)
S C H Co vers the follow ing:
S C H 0.7 10.0 2 48/60 (U)
S C H 0.5 7.0 2 120/60 (U)
S C H 0.35 6.0 2 220/60 (U)
S C H 0.5 10.0 2 48/DC (U)
S C H 0.3 6.0 2 125/DC (U)S C H 0.25 5.0 2 250/DC (U)
ELECTRICAL REQUIREMENTSSolid-State-Controlled Actuators
1. For solenoid a ctuators, models SC G and S CH are used on 12 - 112 valves, and models S CB
and S CE are used on 2" - 4" valves. For electromagnet ac tuators, models SCG and S CH
are used on all valve sizes.
2. Inrush a mps do not a pply for manual reset - no voltage releas e va lve type.
3. Maximum cy cles p er minute (on/off) rated with a valve ha ving a fluid te mperature of 425F.
SOLI-CONELECTROMAGNET
ACTUATORS
The S oli-Con electromag net a ctua tor is a solid-sta te-
controlled electric actuator, which holds the plunger inthe latc hed po sition. The solid-sta te-controller a cts
as electrical signal conditioner. Upon energizing
(a pplying a n e lec trica l signa l), the circuit only a llow s
holding current to the coil, disabling
the inrush current d raw a nd pull-in event. This
a ctuato r is used on the Manual Rese t No Voltag e
Release (NV) valve type. In all other aspects, it is
the same as the solenoid a ctuators.
NOTE: All S oli-Con a ctua tors fea ture c ontinuousduty operation, Cla ss H co ils, function up to ama ximum a mbient tem perature of 185F (85C ), a ndco nta in a 1/2 FNP T co nduit co nnection.
7
8/10/2019 VA18 VA19
10/59
FULLY AUTOMATIC (FA)This fully electric valve a utoma tica lly cha nges its
position ba sed on electrica l signa l. When the S oli-
Con solenoid a ctua tor is de-energized (on loss of
electrical signal), the valve will fail to its normal orfail-sa fe pos ition. Upon a pplying or res toring the
electrical signal, the solenoid actuator will
automa tica lly energize and cha nge the va lve pos ition.
FM SAFETY SHUT-OFF (FM)This version o f the fully elec tric va lve is FM a pproved
for safety s hut-off of fuel oils a nd g a ses . The valve
fea tures a n explos ion proof S oli-Con so lenoid
actuator and is only supplied in the normally closed
fail-sa fe pos ition.
MANUAL RESET ELECTRICALLY TRIPPED (ET)This manua l reset valve mus t b e ma nually a ctuated
to move from its normal or fail-safe position to its
latched position. When the Soli-Con so lenoid
actuator is in the de-energized state (no electrical
signal), the valve is held mechanically in its latched
position. Upon a pplying a n electrica l signa l
(energizing), the so lenoid a ctua tor w ill trip the va lve
to revert bac k to its normal pos ition. Momenta ry
energizing is all that is required to trip this valve.
2500 SERIES VALVE TYPES
MANUAL RESET NO VOLTAGE RELEASE (NV)
This ma nual reset valve must be manua lly a ctua ted
to move from its normal or fail-safe position to its
latched po sition. When the So li-Conelectromag net a ctuator is e nergized (with an
electrica l signal), the va lve is held ma gnetica lly in its
latched po sition. Upon de-energizing (loss of
electrical signal), the electromagnet actuator will
relea se the valve to revert ba ck to its norma l
position. S ince the electromag net ac tuator is used
for holding only, it a voids the higher inrush current
of the s olenoid a ctuator.
OPTIONS:LIMIT SWITCHLimit s witches ma y b e s upplied to indica te valve
open/not o pen, va lve c lose d/not c lose d or bo th.
Choices are S P DTor DP DTsw itches. All switches
supplied will be both watertight and explosion proof.
TERMINAL BLOCKA terminal block ca n be furnished in a sepa rate
external enclosure for making electrical connections
to the electric actuator.
LOCKING DEVICEA locking d evice ma y b e s upplied with a ma nual
operator knob to hold valve in the override position.
P res s ure 2G P M
d ro p = [ ]x (S pec ific gra vity)C v
(PSID)
P res s ure 2460 + F S C FH
d ro p = [ ] x[ ]Inlet P sig + 15 1360 x C v
(PSID)
P res s ure 2lb/hr
d rop = [Specific Volume (ft3/lb )]x [ ]63xC v
(PSID)
FOR LIQUIDS:
FOR GASES:
F O R ST EAM :
PRESSURE DROP CALCULATIONS
SUITABLE FOR
0 TO 300PSI
SATURATED STEAM
8
8/10/2019 VA18 VA19
11/59
EXAMPLE: 2520FAC MP S 1FTEYL
2520 FAC MP S 1F T E Y L
1,2,3,4 5,6,7 8,9 10 11,12 13 14 15 16,17 a nd /o r 18
2520: 2-Wa y fully a utoma tic rota ry sha ft type Soli-Con valve with solid-state-controlled electric actuatorHorizontal pipe mounting; upright actuator
Co ntinuous d uty clas s H molded c oil With 1/2" NPT co nduit co nnection
2" pipe size, 2" port; Cv = approx. 40
FAC: Norma lly close d, energize to open, fail close d
M: Metal (Reg rinding) valve disc
P: P ilot ass isted operation
S: Sta inless steel valve bod y a nd inner parts
1F: ANS I Clas s 150 RF flang ed e ndsT: Teflo n rotary shaft sea l
E: FM Approved explosion proof a nd NEMA 4 wa tertight a ctua tor enclosure
Y: 125 Volts, DC
L: With locking device to hold va lve in the (ma nually override or energized) position
2500 SERIES ORDERING CODE
2 5 2 0 F A C M P S 1 F T E Y C S L
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Series Size Type Trip/Fail Disc P iston Material ANSI CL Shaft Enclo- Voltage Options
Position Seal Matl sure
Piston - Position 9
P = Pilot Operated
D = Direct Operated
S = Semi-direct2
Operated
Body/Bonnet Material - Position 10
S = Stainless Steel CF8M (316)
C = Carbon Steel WCB
ANSI CL - Position 11 & 12
1F = 150 Flanged
3F = 300 Flanged
3T = 300 FNPT3
Shaft Seal Matl - Position 13
T = Teflon
A = Ammonia Service
Enclosure5 - Position 14
E = Explosion Proof
W = Watertight (NEMA 4)
Series - Position 1 & 2
25
Valve Size - Position 3 & 4
05 = 12
08 = 34
10 = 1
15 = 112
20 = 2
30 = 3
40 = 4
Valve Type - Position 5 & 6
FA = Fully Electric
FM = FM Shut Off Valve1
ET = Electrically Tripped
NV = No Voltage Release
Trip/Fail Position- Position 7
O = Normally Open1
C = Normally Closed
Disc - Position 8
M = Metal
T = Teflon
1. FMO is not available.2. Liquid only3. 1/2" to 2" valve size only4. 1/2" to 112" valve size only; Universal Voltage is 48-240 VAC (50 or 60 Hz) and 48-250 VDC.5. Explosion Proof (E) required with FMC valve type. FM approved for CL.I, Div. I, Groups B, C
& D and CL.II, Div. I, Groups E, F & G.6. Not offered as explosion proof
Voltage - Position 15
U = Universal4
V = 24 DC4
W = 250 DC6
X = 220 (50 or 60 Hz)6
Y = 125 DC
Z = 120 (50 or 60 Hz)
Options - Position 16, 17 & 18
Switches
CS = SPDT Show Closed
CD = DPDT Show Closed
OS = SPDT Show OpenOD = DPDT Show Open
2S = SPDT Show Both
2D = DPDT Show Both
Other
T = Terminal Box
L = Lock Device w/Handle
9
8/10/2019 VA18 VA19
12/59
10
2500 SERIES VALVE SPECIFICATION FORMLaurence Products, Electric On /Off
I have (or a nticipate) a req uirement for a n electrica lly a ctuated valve as follow s:
Qua nt ity _________________P ipe S ize ________________
Fully Elec tric a l Energize t o Open (Norma lly Clos ed)
Energize to close (Norma lly Open)
2-way
Manually Reset Latch to Open (Normally Closed)
Latch to Close (Normally Open) Trip on C urrent Fa ilure Trip o n Ene rgiza tion
Summary of Application
Fluid Ha nd led _________Visc os ity ________@________C lea n? ________C o nc .________ S pec . G ra v. ___________
Ma x Op ening Different ia l P res s ure ________________ Fluid Temp _______________ Amb ien t Temp ___________
Flow Ra te _____________________ Max Allo w a b le P res s ure Dro p ____________________ Req d C v___________
B o d y Ma tl _____________________________________ Inne r P a rts ___________________ Va lve Dis c ___________
Sc rewed Ends Flanged150 Flanged 300 Socketweld Buttweld Other____________
Horizonta l P ipe Mounting Vertica l Pipe Mounting- Up Flow Down Flow
Actua tor Enc los ure: NEMA4 Wa te rtight/Dus ttig ht Explos ion P roof C la ss I,
G roup __________ Div__________ Other____________________
AC DC Volts ________ Hz ________ Du ty ________ Fre q ue nc y o f Op era tio n ________________________
Coil Insulation Clas s H (std) Other_________________________ P os ition S w itc h(es )__________
Other Optio ns _____________________________________________________________________________________
Other Des c rip tio n _________________________________________________________________________________
Please send ______c opies of dimens ion dra w ing ______copies of Laurence On-Off Valves Handbook.
P rojec t/J ob _________________________________________ Da ta S he et ________ of ________
Unit /C us to mer ______________________________________ S pec _____________________________________
P.O. /LC O File # ______________________________________ Ta g _______________________________________
Item _______________________________________________ Dw g ______________________________________
C ont ra c t ____________________________________________ S ervic e ___________________________________
MFR S eria l# ________________________________________
CONTROL VALVESPEC SHEET
QUESTIONS? CALL LESLIE CONTROLS @ (813) 978-1000 PLEASE FAX COMPLETED FORM TO: (813) 977-0174
Asubsidiary of International, Inc.
12501 Teleco m Drive Tamp a, Florida 33637
(813) 978-1000 FAX: (813)-978-0984
8/10/2019 VA18 VA19
13/59
11
SERIES 500, 550 & 600 2-WAY SHUTOFF TYPE (Fail Closed)
SOLI-CON VALVES
2-WAY SHUTOFF VALVES
ROTARY SHAFT TYPE
SERIES 500SC
SERIES 550SC
SERIES 600SC
FEATURES
SOLI-CONVALVES
8/10/2019 VA18 VA19
14/59
NEMA 1 NEMA 2 NEMA 3 NEMA 4 NEMA 4X NEMA 12ACTUATOR ENCLOSURE
FM APP ROVED EXPLOSION PROOFCLASS I, GROUPS B, C &D CLASS II GROUPS E, F &G
VALVE INNERDISC
SERIES SERIES SERIESBODY PARTS 500SC 550SC 600SC
ASTM* S ta inles s Rg 502S C 522S C 552S C 572S C 605S C 625S CB ronze B -62
S teel Res 502G SC 522G SC 552G SC 572G SC 605G SC 625G SC
Na va l B -61 Mo nel Rg 503S C 523S C 553S C 573S C 603S C 623S C
Bronze Res 503G S C 523G S C 553G S C 573G S C 603G S C 623G S C
S t a inle s s A-351 S t a inle s s Rg 506 S C 526S C 556S C 576S C 610S C 630S CS teel C F8 S teelType 304 Type 303/304 Res 506G S C 526G S C 556G S C 576G S C 610G S C 630G S C
S t a inle s s A-351 S t a inle s s Rg 507 S C 527S C 557S C 577S C 611S C 631S CS teel C F8 S teelType 316 Type 316 Res 507G S C 527G S C 557G S C 577G S C 611G S C 631G S C
S t a inle s s A-351 S t a inle s s Rg 508 S C 528S C 558S C 578S C 612S C 632S CS teel C N7M S teel
Alloy-20 Alloy-20 Res 508G S C 528G S C 558G S C 578G S C 612G S C 632G S C
A-216 S t a inle s s Rg 509 S C 529S C 559S C 579S C 609S C 629S CSteel**
WC B S teel Res 509G S C 529G S C 559G S C 579G S C 609G S C 629G S C
Fe d Rg 504 S C 524S C 554S C 574S C 604S C 624S CMonel QQ-N Monel
-288 Res 504G S C 524G S C 554G S C 574G S C 604G S C 624G S C
VALVE BODIES -
INNER PARTS -
REGRINDING DISC
RESILIENT DISC
SEAT -
BODY-BONNET FLANGE O-RING SEAL -
ROTARY SHAFT SEAL -
ACTUATOR ENCLOSURE -
ACTUATORS -
ACTUATOR VOLTAGES -
MOUNTING -
ACTUATOR CURRENT
LEVER LOCKING DEVICE -
GRAVITY OPERATED -
MATERIALS TRACEABILITY -
POSITION SWITCH(ES) -
EXTERNAL LINKAGE COVER -
TERMINAL BLOCK -
OPTIONAL FEATURES
12
8/10/2019 VA18 VA19
15/59
PRESSURES -
FOR HIGHER PRESSURES -
TEMPERATURES -
PORT SIZES -
TYPE CONNECTIONS -
**STAINLESS STEEL, STEEL, & MONEL VALVES -
Cv FLOWFACTORS -
SEE PAGE 4 -
TO SPECIFY A CATALOG NUMBER -
13
8/10/2019 VA18 VA19
16/59
DIMENSIONS
All above dimensions a nd w eights are a pproximate for
estimating purposes only.
Sta ndard flanges are drilled per ANSI B16.5 or
B16.24
Install valve with actuato r in upright position in a
horizontal pipeline.
Valve bodies can be rotated 90 to four positions to
facilitate mounting for direction of flow. Specify with
order if body orientation is to be different than
st a n d a rd sh ow n a b ov e.
Consult factory for vertical pipe mounting
dimensions. S pecify whether flow is upw ard ord ow n w a rd .
The actuator may be rotated 90 to for positions to
vary the location of the conduit connection. Allow
add itional headroom to remove a ctuator.
If available headroom is limited, valve can be
furnished with valve b ody inverted: add Z to s uffix
on pa ge 3 and s pecify flow direction desired.
DIMENSIONS
ORDERING DATACv FLOWFACTOR FORMULAS
DIMENSIONS
14
8/10/2019 VA18 VA19
17/59
S ERIES 7 0 0 , 7 0 0 HP, 8 0 0 2 -WAY MANUALLY RES ET
SAFETY SHUTOFF
S OLENOID VALVES NO VOLTAGE RELEASE - Trip on Current Failure
NORMALLY CLOSED - Reset to Open ROTARY SHAFT TYPE - with Rotary Teflon Shaft Seal
#6FUELOIL
#2FUELOIL
FUEL GASES
MANUALLY RESET, NO VOLTAGE RELEASE
NORMALLY CLOSED, RESET TO OPEN
SERIES 700 SERIES 800
FEATURES
SERIES 700HP
15
8/10/2019 VA18 VA19
18/59
CATALOG NUMBERPREFIXES
FOR SERIES 700HP ADD HPTO SERIES 700 PREFIX ABOVE
OPTIONAL FEATURES
16
8/10/2019 VA18 VA19
19/59
CATALOG NUMBER SUFFIXES
ORDERING DATA
17
8/10/2019 VA18 VA19
20/59
DIMENSIONSHORIZONTAL PIPE MOUNTING
* For DC s uffixes, d imension B is 1-1/2" less in mos t ca ses .
- All ab ove dimensions a nd weights a re approximate , for estimating purpos es only.
Dimensions are based on A.C. solenoid - (D.C. solenoid slightly larger in some cases).
- Net weights a re ba sed on a b ronze valve.
18
8/10/2019 VA18 VA19
21/59
S ERIES 7 5 0 , 7 5 0 HP, 8 5 0 2 -WAY MANUALLY RES ET
FAIL OPEN
S OLENOID VALVESFor Fire Deluge - Emergency Dump, Vent, Discharge- Process Cooling
NO VOLTAGE RELEASE - Trip on Current Failure
NORMALLY OPEN - Reset to Close, TRIPS OPEN
ROTARY SHAFT TYPE - with Rotary Teflon Shaft Seal
MANUALLY RESET, NO VOLTAGE RELEASE
NORMALLY OPEN, RESET TO CLOSE
SERIES 750
SERIES 750HP
SERIES 850
ROTARY SHAFT TYPE
FEATURES
19
8/10/2019 VA18 VA19
22/59
CATALOG NUMBERPREFIXES
FOR SERIES 750HP ADD HP TO SERIES 750 PREFIX ABOVE
OPTIONAL FEATURES
20
8/10/2019 VA18 VA19
23/59
CATALOG NUMBER SUFFIXES
ORDERING DATA
21
8/10/2019 VA18 VA19
24/59
DIMENSIONS
* For DC s uffixes, d imension B is slightly less in most c as es.
- All above dimensions and weights are approximate, for estimating
purposes only. Dimensions are based on
A.C. solenoid - (D.C. solenoid s lightly larger in som e ca ses ).
- Net weights are ba sed on a bronze valve.
22
8/10/2019 VA18 VA19
25/59
S ERIES 1 1 0 0 , 1 1 0 0 HP, 1 2 0 0 - 2 -WAY MANUALLY RES ET
TRIP SHUTOFF
S OLENOID VALVES ELECTRICALLY TRIPPED - Trip upon Energization
NORMALLY CLOSED - Latch to Open
ROTARY SHAFT TYPE - with Rotary Teflon Shaft Seal
MANUALLY RESET, ELECTRICALLY TRIPPED
NORMALLY CLOSED, LATCH TO OPEN
SERIES 1100
SERIES 1100HP (not shown)
SERIES 1200
ROTARY SHAFT TYPE
FEATURES
23
8/10/2019 VA18 VA19
26/59
FOR SERIES 1100HP ADD HPTO SERIES 1100 PREFIX ABOVE
CATALOG NUMBERPREFIXES
OPTIONAL FEATURES
24
8/10/2019 VA18 VA19
27/59
CATALOG NUMBER SUFFIXES
ORDERING DATA
25
8/10/2019 VA18 VA19
28/59
8/10/2019 VA18 VA19
29/59
8/10/2019 VA18 VA19
30/59
CATALOG NUMBERPREFIXES
FOR SERIES 1150HP ADD HP TO SERIES 1150 PREFIX ABOVE
OPTIONAL FEATURES
28
8/10/2019 VA18 VA19
31/59
CATALOG NUMBER SUFFIXES
ORDERING DATA
PRESSURES
29
8/10/2019 VA18 VA19
32/59
DIMENSIONS
- All above dimensions and weights are approximate, for estimating purposes only. Dimensions are based on
A.C. solenoid - (D.C. so lenoid s lightly larger in some ca ses ).
- Net weights are ba sed on a bronze valve.
Location of the conduit
connection varies depending
on the type of solenoid
enclosure and whether
A.C or D.C.
30
8/10/2019 VA18 VA19
33/59
SERIES 3300 - 3-WAY ROTARY SHAFT TYPE
DIRECT OPERATED - POPPET TYPE
S OLENOID VALVESFULLY ELECTRICAL (Automatic Reset)
FLOWFORMS
DIRECT OPERATED POPPET TYPE
ROTARY SHAFT TYPE FEATURES
- For PILOT CONTROL: Opening and Closing ofPneumatic and Hydraulic Control Valves, Devices& Systems; Safety Shutoff, Emergency Venting
- For DIRECTIONAL CONTROL: Diverting,By-Passing, Recirculating, Selecting,Sampling, Switching
31
8/10/2019 VA18 VA19
34/59
CATALOGNUMBER
PREFIXES
OPTIONAL FEATURES
* For purpose s of identifying a lloy by c hemical analysis
32
8/10/2019 VA18 VA19
35/59
CATALOG NUMBER SUFFIXES
ORDERING DATA
33
8/10/2019 VA18 VA19
36/59
34
DIMENSIONS (in.) (AC voltage only)
All dimensions a nd w eights
shown here are approximate
for estimating purpose s only. For dimensions for D.C.
voltag es - cons ult fac tory. As
an approximation, above
dimensions for D.C. are
ab out 10% greater than
co rrespo nding A.C.
dimensions in some ca ses.
For Series 3300, valve
bod ies c an b e rotated 90 to
four positions, to facilitate
mounting for direction of
flow. S pecify w ith order if
body orientation is to be
different than sta nda rdshown below.
For Series 3300V
dimensions - co nsult fac tory.
Spec ify whether B
connection should be facing
up or down.
For Series 3300Z
dimensions - co nsult fac tory.
Specify direction B
connection s hould be facing.
8/10/2019 VA18 VA19
37/59
35
S ERIES 3 4 0 0 & 3 5 0 0 - 3 -WAY MANUALLY RES ET
ROTARY SHAFT TYPE
SOLENOID
VALVESDirect Operated - Poppet Type
MANUALLY RESET, ELECTRICALLY TRIPPED
SERIES 3500 TRIP UPON ENERGIZATIONSERIES 3400 TRIP UPON CURRENT FAILURE
MANUALLY RESET, NO VOLTAGE RELEASE
ROTARY SHAFT TYPE FEATURES
FLOWFORMS
DIRECT OPERATED, POPPET TYPE
8/10/2019 VA18 VA19
38/59
CATALOGNUMBER
PREFIXES
OPTIONAL FEATURES
36
8/10/2019 VA18 VA19
39/59
CATALOG NUMBER SUFFIXES
ORDERING DATAPRESSURES
37
8/10/2019 VA18 VA19
40/59
8/10/2019 VA18 VA19
41/59
SERIES CY500 &CY6002-WAY ROTARY SHAFT TYPE
CYLINDER OPERATED VALVE
NORMALLY C LOSED - OP ENEND B Y C YLINDER
Horizo nta l or Vertic a l P ipe Mounting
Laurence Catalog No.
P ipe S ize C v (AP R) P ort Dia .
Va lve B od y Inner P a rts
Dis c s S ha ft S ea l
Fluid S pec . G ra v.
Vis c os ity Other P roperties
Max. Opening Differential Pressure
Opera ting Temps Amb ient
Flow Ra te P
Type Co nnec tions
S olenoid Enclosure
Vo lts He rtz - C oil Ins . C la ss
Dut y: Cont inuous Conduit Connection: 1/2" NP T
Dimens ions : D- F- H-
E- G - J -
Net Weig ht lb s
C urrent Da ta : Amps Hold ing
Amps Inrush
a t Volts Hertz
Refer to
Laurence S.O. Number
Laurence S erial No.
Item Ta g
Mark
Customer
P.O. Req .
U s er
Location
Install valve w ith solenoid in an upright p osition inhorizontal pipe lines. Allow sufficient headroom to
remove solenoid - see Dimension J .
To fa cilitate mounting fo r direct ion of flow, uppe r valve
body can b e rotated 180, lower valve bod y ca n be
rotated 90 to four positions - see instruction sheet.
FLOW FORM O - Connect inlet at B
Normally Closed Outlet a t A
Normally Open Outlet a t C
Latch to close C outlet, open A outlet
Trip to open C outlet, close A o utlet
39
8/10/2019 VA18 VA19
42/59
VALVE B OD Y C AN
B E RO TATED 90 TO
FOUR P OS ITIONS
TO FAC ILITATE
MOUNTING
FOR D IREC TION
OF FLOWSEE INSTRUCTION
SHEET
ALL FLANG ES DRILLED
TO ANS I S TANDARD S
VALVECLOSED
VALVEOPEN
S HO WN WITH
REGRINDING DISC
S HO WN WITH
RESILIENTDISC
SERIES CY500 & CY6002-WAY ROTARY SHAFT TYPE
CYLINDER OPERATED VALVE
NORMALLY C LOSED - OP ENEND B Y C YLINDER
Horizo nta l or Vertic a l P ipe mo unting
Laurence Catalog No.
P ipe S ize C v (AP R) P ort Dia .
Dis c s S ha ft S ea l
Fluid S pec . G ra v.
Viscosity
Other Properties
Max. Opening Pressure Differential
Opera ting Temps Amb ient
Flow Ra te P
Type Co nnec tions
Min. /Ma x. C yl. Op era tiing P re s sure /
Ac ting C ylind . C onn
Dimens ions : C - D- E- F-
G - H-
Net Weig ht lb s
Refer to
Laurence S.O. Number
Laurence S erial No.
Item Ta g
Mark
Customer
P.O. Req .
U s er
Location
SERIES CY500DIRECT OPERATED
SERIES CY600SEMI-DIRECT OPERATED
40
8/10/2019 VA18 VA19
43/59
41
SOLI-CON
NEMA 4 Explosion P roof RATED VOLTAG E INRUS H/ A B C D E F MAX. MIN. MIN.
FM Approved HOLDING 1 DIA S troke Forc e2 Hold 2
S C A ES CA 120 VAC 60 HZ 4.7 / 0.1 2-7/8 5 -1/2 2-3/16 4-1/4 1/4-2OUNC -2B 5/16-1B UNC -2B 1.5 7.0 27.0Range: 90-140 VAC
S C A ES CA 220 VAC 60 HZ 4.5 / 0.1 2-7/8 5 -1/2 2-3/16 4-1/4 1/4-2OUNC -2B 5/16-1B UNC -2B 1.5 7.0 27.0Range: 180-275
S CD ES CD 125 VDC 5.3 /0.1 2-7/8 5-1/2 2-3/16 4-1/4 1 /4-2OUNC -2B 5/16-1B UNC -2B 1.5 7.0 27.0Range: 90-140 VAC
S CD ES CD 250 VDC 2.5 /.16 2-7/8 5-1/2 2-3/16 4-1/4 1 /4-2OUNC -2B 5/16-1B UNC -2B 1.5 7.0 27.0Range: 180-275
S C B ES C B 120 VAC 60HZ 14. 2 / .2 3-1/2 7 -1/4 2 -11/16 5-3/4 3/8-16U NC -2B 7/16-14U NC -2B 2. 50 26. 0 77. 0Range: 90-140 VAC
S CE ES CE 125 VDC 13.5 / .04 3-1/2 7-1/4 2-11/16 5-3/4 3/8-16UNC -2B 7/16-14UNC -2B 2.50 21.0 60.0Range: 90-VDC
S C B N/A 220 VAC 60HZ 7. 5 / .17 3-1/2 7-1/4 2-11/16 5-3/4 3/8-16U NC -2B 7/16-14U NC -2B 2. 50 21. 0 60. 0Range: 180-275VAC
S C G ES C G 3 2 4 VD C 1 4. 0 / . 8 3 -1 /2 6-3 /1 6 2 -1 9/3 2 4 -3 7/6 4 1 /4 -2 OU NC -2 B 5 /1 6-1 BU NC -2 B 1 .5 0 1 0. 5 2 8. 0Range: 21.6-26.4 VDC
S C H ES C H3 48/120/240 VAC 6.5-12.0 /.4-1.4 3-1/2 6-3/16 2-19/32 4-37/64 1/4-2OUNC-2B 5/16-1BUNC-2B 1.50 10.5 28.0Range: 10%
S C H ES C H3 48/125/250 VDC 6.5-12.0 /.4-1.4 3-1/2 6-3/16 2-19/32 4-37/64 1/4-2OUNC-2B 5/16-1BUNC-2B 1.50 10.5 28.0Range: 10%
OPTIONALPLUNGER ATTACHMENTS
NOTES :
1. INRUS H/HOLDING - Amps at nominal voltag e.
2. FORCE/HOLDING in pounds - Ba sed on ma ximum temperature and m inimum voltag e.
3. SOLI-CON to be mounted on existing bracket.
1/2" NP T
CONDUIT
CO NNECTIONWITH MINIMUM
18" LONG
LEADS
SEE F FOR DIA
8/10/2019 VA18 VA19
44/59
FM APPROVED EXPLOSION PROOF
SOLENOID OPERATORS/ACTUATORS
F or CLASS I, G RO UPS A, B, C & D, Div is ion 1 & 2 Ar eas and
CLASS II, G RO UPS E, F & G , Div is ion 1 & 2 Ar eas .
42
8/10/2019 VA18 VA19
45/59
F M APPR O VED EXPL O SIO N PR O O F
SOLENOID OPERATORS/ACTUATORS
UNAUTHOR IZED ALTER ATIONS TO THE
S OLENOID ENCLOS URE VOIDS THE FM
AP P ROVAL AND THE P ROD UC T WARRANTY
FOR MOUNTING OTHER THAN P ULLING
UP RIGHT (AS S HOWN, PAGE 1),
P LEAS E C ONS ULTFAC TORY.
43
8/10/2019 VA18 VA19
46/59
FM APPROVED EXPLOSION PROOFSOLENOID OPERATORS/ACTUATORS
UNAUTHORIZE D ALTER ATIONS TO THE
S OLENOID ENCLOS URE VOIDS THE FM
AP P ROVAL AND THE P ROD UC T WARRANTY
FOR MOU NTING OTHER THAN PU LLING
UP RIGHT (AS S HOWN, PAG E 1),
P LEAS E C ONS ULT FACTORY.
44
8/10/2019 VA18 VA19
47/59
I have (or a nticipate) a req uirement for a n a ctuato r as follow s:
Qua nt ity _____________________ A.C. D.C . Volta g e____________ He rtz ____________
S um ma ry of App lic a tio n_______________________________________________________________________________
____________________________________________________________________________________________________
Actua tor Enc los ure: NEMA4 Wa te rtight/Dus ttig ht Explosion P roof C la ss I,
G ro up __________Div __________
Other____________________
S oleno id: Your n et pull or pus h fo rce (loa d) in lbs ._________P lunge r tra vel (s troke) req uired in inche s _________
P LEAS E S UB MIT DES C RIPTION OR G RAP H OF LOAD VS . S TROKE
S olenoid Actuato r to be mounted w ith a xis: Horizontal Vertical
Pulling Up Pulling Down Pushing Up Pushing Down
Will y ou pro vid e a s pring ret urn fo r th e S o lenoid Ac tua to r? ____________________________________________
IF S O, S UB MITDES CR IP TION OR G RAP H OF S P RING TENS ION (OR COMP RESS ION) VS . S TROKE
Type of plunger c onne ct ion
C levis w /Hole
Threa ded Rod
Thread ed Hole
_______________
Electromagnetic: Your net holding force (load) in lbs.______________
P ole pie c e d es ig n, if o th er tha n s ta nd a rd ____________________________________________________________
Ma ximu m P eriod o f Ene rgiza tio n ____________________ Freq ue nc y o f Op era tio n ____________________________
Amb ient Tempera ture R a ng e _____________________________ Ind oors /Out d o ors ____________________________
Coil insulation Clas s H (std) Molded Other_________________________________________________
S pec ia l Ele c tric a l C ha ra c teris tic s _______________________________________________________________________
Mo un ting d es c ription o r pro vis ions req uire d _____________________________________________________________
Are th ere a ny w eigh t, d ime ns iona l o r s ha pe limita tio ns ? __________________________________________________
Co il to have Lead Wires (std) Termina l B loc k Other________________________________________
Co nduit connection 1/2" NPT (s td ) 3/4" NP T Other ______________________________________
Other Des c rip tio n ____________________________________________________________________________________
Please se n d ______c opies of dimens ion d raw ing ______copies of Laurence On-Off Valves Handbook.
ELECTRIC ON/OFF ACTUATORS SPECIFICATION FORM
P rojec t/J ob _________________________________________ Da ta S he et ________ of ________
Unit /C us to mer ______________________________________ S pec _____________________________________
P.O. /LC O File # ______________________________________ Ta g _______________________________________
Item _______________________________________________ Dw g ______________________________________
C ont ra c t ____________________________________________ S ervic e ___________________________________
MFR S eria l# ________________________________________
CONTROL VALVESPEC SHEET
45
Asubsidiary of International, Inc.
12501 Teleco m Drive Tamp a, Florida 33637
(813) 978-1000 FAX: (813)-978-0984
8/10/2019 VA18 VA19
48/59
E LE CTRIC ON-OF F CONTROL VALVE S
ACTUATED
POSITION
(SOLENOID
ENERGIZED)
NORMAL
POSITION
(SOLENOID
DE-ENERGIZED)
3-WAY FLOW FORMS
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
FLOWFORM M FLOWFORM N FLOWFORM O FLOWFORM P
INLET AT A INLET AT C INLET AT B INLETS AT A & C
OUTLET AT B OUTLET AT B OUTLETS AT A &C OUTLETS AT A &C
VENT AT C VENT AT A
Each 3-way valve is factory adjusted
for one of the following Flow Forms:
For Pilot Control:Form M - Supply normally closed
Energize t o open inlet port.
De-energize to vent.
Form N - Supply normally openEnergize to vent.
De-energize to open inlet port.
For Directional Control:Form O - Diverting (one inlet, two outlets)
Energize to open normally closed outlet &close normally open outlet.
De-energize to reverse above action (return
to normal position).
Form P - Selecting (two inlets, one outlet)Energize to open normally closed inlet &
close normally open inlet.
De-energize to reverse above action (return
to normal position).
46
8/10/2019 VA18 VA19
49/59
E LE CTRIC ON-OF F CONTROL VALVE S
SPEC SHEETI have (or anticipate) a requirement for an electrically actuated valve as follows:
Qua nt ity _________________P ipe S ize ________________
Fully Electrica l
Energize to Open (Norma lly C los ed)
Energize to close (Normally Open) 2-way
Manually Reset Latch to Open (Normally Closed)
Latch to Close (Normally Open)
Trip on C urrent Fa ilure Free Hand le Trip o n Ene rgiza tion
Fully Electrica l 3-way
Manually Reset Trip on C urrent Fa ilure Free Hand le
Trip o n Ene rgiza tion
Pilot Control S upply Normally Closed (when de-energized
S u p ply No rm ally Ope n o r u nlatch e d )
Directional Diverting - 1 inlet, 2 outlets
Selecting - 2 inlets, 1 outlet
Fully Electrica l 4-way
Manually Reset Trip on C urrent Fa ilure Free Hand le
Trip o n Ene rgiza tion
S um ma ry o f App lic a tio n_______________________________________________________________________________
Fluid Ha nd led _________Visc o s ity ________@________C lea n? ________C onc .________ S pec . G ra v. ______________
Ma x Op ening Different ia l P res s ure ________________ Fluid Temp _______________ Amb ien t Temp ______________
Flow Ra te _____________________ Ma x Allow a b le P res s ure Dro p ____________________ Re q d C v ______________
B od y Ma tl _____________________________________ Inn er P a rts ___________________ Va lve Dis c ______________ Screwed Ends Flanged150 Flanged 300 Socketweld Buttweld Other_______________
Horizonta l P ipe Mounting Vertical Pipe Mounting- Up Flow Down Flow
Actua tor Enc los ure: NEMA4 Wa te rtight/Dus ttig ht Explosion P roof C las s I,
G ro up __________Div __________
Other____________________
AC DC Vo lts ________ Hz ________ Du ty ________ Fre q ue nc y o f Op era tio n ___________________________
Coil Insulation Class H (std) Other_________________________ P o s ition S w itc h(es ) ____________
Other Optio ns _______________________________________________________________________________________
Other Des c rip tio n ____________________________________________________________________________________
Please send ______co pies of dimens ion dra w ing ______copies of Laurence On-Off Valves Handbook.
NAME __________________________________________________DEPT. OR TITLE ____________________________
COMPANY __________________________________________________PHONE NO. ____________________________
ADDRESS __________________________________________________________________________________________
________________________________________________________________FAX NO. ____________________________
QUESTIONS? CALL LESLIE CONTROLS @ (813) 977-0137 PLEASE FAX COMPLETED FORM TO: (813) 977-0174
SEEFLOW FORMSON OPPOSITE PAGE
FOR 3-WAY OPTIONS
47
8/10/2019 VA18 VA19
50/59
FIRE-CIDE SERIES - HEAT ACTUATED SHUTOFF VALVE
ALL VALVES FA CTO RY M UTUA L S Y S TE M AP P ROVED FOR EMERGENCY S HUT-OFF
ROTARY SHAFT DESIGN
FIRE-CIDE series valves are globe-type valves, operated
by a ma nual external lever. Lifting a ction is trans mitted from
the lever directly to the valve stem and piston through the
rotary shaft. This me cha nica l advanta ge allow s the va lve
t o opera t e a t higher pres s ures a nd a llow s for a s t ronger
re t ur n s p rin g t o a s s u re re lia b l e , f a il-s a f e o p e ra t io n
compared to direct lift or direct acting valves. Closing
spee d, for fail closed valves, is not significa ntly a ffected by
fluid viscosity, line pressure or pressure drop across valve.
The slight arc of m otion (15-30) of the valve rotary sha ft
provides much longe r maintenance-free life o f the rotary
shaft seal compared to reciprocating-stem packing glands.
Fire safe rated S teel heavy-wa lled bo dy for high press ure Co rrosion resistant, s tainless steel inner parts Manua l ope ration provision for period ic tes ting Full diam eter internal valve port for high C vs ANSI Clas s threa ded o r RF flang ed ends Zero pressure and flow required for closing
FIRE-CIDE SERIES HIGHLIGHTS No diaphrag ms or need le sized orifices to c log Visc ous a nd d irty fluids ca n be ha ndled efficiently S tand ard fluid temperature rang e: -50 to 550 F MSS SP -61 sea t leakag e rated Quick ac ting, tw o pos ition; fails closed @ link rating All fusib le links a re UL Lis ted Inherently sa fe
BUILT FOR SAFETY
OSHA requires a hea t a ct ua t ed va lve on ea ch w it hdra w a l
line from indoor tanks conta ining flamm ab le o r com bustible
fluids. The FIRE-CIDE series valves conform to and exceed
the requireme nts of OS HA para . 1910.1016 (b) (4) (iv) (c).
Thes e va lves ca n a ls o be pla ced on outdoor f la mma ble
liquid lines as a sensible sa fety preca ution. They c an betripped manua lly a nd instantly by pulling a release pin for
periodic testing or ma nual operation.
48
8/10/2019 VA18 VA19
51/59
All d imensions (inches ), we ights (pounds)
a n d Cv
s listed are approximate and are for
estimating purposes only. All flange s are
drilled to ANSI B 16.5. Va lve is sho w n in the
mechanically latched open position; it trips
closed upon melting of the link or remova l of
pin. Valve bodies ca n be rotate d 90, 180 or
270 to a cco mmoda te flow direction. Larger
s iz e s a n d a lt e rn a te e n d c o n ne c t io n s a re
available. Please consult factory for further
details.
*PRESSURES - The a bo ve s uffixes repres ent the m aximum inlet d ifferentia l pres sure (psi) the va lves ca n be ope nedagainst. Because the line pressure and flow are above the seat, tending to close the valve, all valves will shut and hold
closed at e mergency press ures greatly exceed ing thos e figures sho wn. The ma ximum pressures are limited b y ANSI
B 16.5/B 16.34.
MOUNTING NOTE: All 2800 Series va lves must b e mo unted in an upright pos ition (a s s how n ab ove). Va lve b od ies a re to
be mounted in a horizontal pipeline. For mounting in vertica l pipeline o r any other pipeline orientation, please co nsult the
factory.
S IZE C ONNEC TIONS MAX. OP ENING DIFF. P RES S . (ps i) DIMENS IONS
P ipe/ NetDirec t (D) P ilot (P ) S emi-Direc t (S ) A B C DS uffix P ort End s C v Wt. (in.) (in.) (in.) (in.)
(in.) Meta l Teflon Meta l Teflo n Meta l Teflon (lb s.)
05 12 FNP T 3 300 300 720 300 N/A N/A 12 4 5 7 438
05 12 150FL 3 275 275 275 275 N/A N/A 13 414 5 7 438
05 12 300FL 3 300 300 720 300 N/A N/A 15 512 5 7 438
08 34 FNP T 6.8 250 250 720 270 720 270 14 312 6 7 438
08 34 150FL 6.8 250 250 275 270 275 270 16 478 6 7 438
08 34 300FL 6.8 250 250 720 270 720 270 20 7 6 7 438
10 1 FNP T 10 200 200 720 240 720 240 16 4 7 7 438
10 1 150FL 10 200 200 275 240 275 240 20 518 7 7 438
10 1 300FL 10 200 200 720 240 720 240 25 512 7 7 438
15 112 FNP T 22.5 1 50 150 720 170 720 170 21 7 8 8 4316
15 112 150FL 22.5 150 150 275 170 275 170 26 612 9 8 4316
15 112 300FL 22.5 150 150 720 170 720 170 40 712 12 12 4316
20 2 FNP T 40 150 150 400 220 400 220 34 1034 8 10 412
20 2 150FL 40 150 150 275 220 275 220 39 10 9 10 412
20 2 300FL 46 150 150 720 220 720 220 50 1012 10 12 412
30 3 150FL 90 100 100 275 150 275 150 97 978 9 11 412
30 3 300FL 96 100 100 720 150 300 150 112 1134 11 12 412
40 4 150FL 160 60 60 275 115 275 115 115 1134 10 11 412
40 4 300FL 160 60 60 720 115 300 115 125 14 13 14 412
FIRE-CIDE 2800 SERIES DIMENSIONS
EXPANDED OFFERING/ADDITIONAL OPTIONS
The 2800 series is a ba sic offering o f the FM approved FIRE-CIDE valves. In ad dition to all the features of the 2800
series, the 1700/1800 se ries is an expand ed offering of o ur heat ac tuated fusible link shutoff valves including s izes from
1/4" to 8" will full port co nstruction. The 1700/1800 series a lso offers a dd itional options s uch a s linkag e c overs, p os ition
indication switches, a nd buttwe ld or soc ketweld end co nnections. Materials for this s eries include B ronze, Naval Bronze,
Alloy 20, Monel, a nd Ha stelloy. For add itional information a nd a ca talog b ulletin, please co ntac t the fac tory.
49
8/10/2019 VA18 VA19
52/59
NOTE: Fusible links are UL approved.Threaded ends are available
in 12" to 2" only.
FIRE-CIDE 2800 SERIES ORDERING CODE
2 8 2 0 H 2 C M P S 1 F T
1 2 3 4 5 6 7 8 9 10 11 12 13
Class Size Link Fail Disc Piston Material ANSI CL Shaft
Position Seal Matl
Link- Position 5 & 6
H1 = 135F
H2 = 165F
H3 = 212F
H4 = 286F
H5 = 386F
Fail Position - Position 7
C = Normally Closed
Disc- Position 8
M = Metal1
T = Teflon
Piston - Position 9P = Pilot Operated
D = Direct Operated
S = Semi-direct2
Class - Position 1 & 2
28
Valve Size - Position 3 & 4
05 = 12
08 = 34
10 = 1
15 = 112
20 = 2
30 = 3
40 = 4
Material - Position 10
S = Stainless Steel 316
CF8M
C = Carbon Steel WCB
ANSI CL - Position 11 & 12
1F = 150 Flanged
3F = 300 Flanged
3T = 300 FNPT3
Shaft Seal Matl - Position 13
T = Teflon
M = Metal
1. Valve standard offering
2. Liquid only
3.12" to 2" only
EXAMPLE: 2820H2CMPS1FT
2820 H2 C MP S 1F T
1,2,3,4 5,6 7 8,9 10 11,12 13
2820: 2-Wa y FM Approved s a fety s hutoff, rotary s haft type Fire-Cide Va lve
Horizontal pipe mounting; upright actuator
2" pipe size, 2" port; Cv = approx. 40
H2: 165F fusible link
C: Fail Clos e, held openwith the link
M: Metal (Reg rinding) va lve d isc
P : P ilot ass isted operation
S: Sta inless steel valve bod y a nd inner parts
1F: ANS I Clas s 150 RF fla nged ends
T: Teflo n rotary shaft sea l
1. Valve standard offering2. Liquid only3. 1/2" to 2" valve size only4. Valve standard offering up to 425F
50
8/10/2019 VA18 VA19
53/59
QUESTIONS? CALL LESLIE CONTROLS @ (813) 978-1000 PLEASE FAX COMPLETED FORM TO: (813) 977-0174
I have (or anticipate) a requirement for a Fire Safety Shut Off valve as follows:
Qua nt ity _________________P ipe S ize ________________ FM Approved
Fail Closed
2-way Fail Open
S um ma ry o f App lic a tio n _____________________________________________________________________________
Fluid Ha nd led _______________________________________________________ S pec . G ra v. ___________________
Visc os ity _____________________ C onc ent ra tio n _____________________ Fre e of S o lids ? ___________________
Ma x Inlet P re s s ure ____________________________________ Min/Ma x Fluid Temp __________________________
Flo w Ra te ___________________________________ Ma x Allow a b le P res s ure Drop __________________________
Tempera ture Ra ting o f Fus ib le Link De s ired ____________________________________________________________
B od y Ma tl _____________________________________ Inne r P a rts ___________________ Va lve Dis c ____________
Screwed Ends Flanged 150 Flanged 300 Other______________
Horizonta l P ipe Mounting Vertical Pipe Mounting- Up Flow Down Flow
Position Switch to Indicate- Valve Open Va lve C lose d S P D T D PD T
Other Des c rip tio n___________________________________________________________________________________
Please send ____________ copies of an applicable dimension drawing.
Please send ____________ additional copies of Laurence On-Off Valves Handbook.
2800 SERIES FIRE-CIDE VALVE SPECIFICATION FORMLa urenc e P rod uct, Fusible Link
P rojec t/J ob _________________________________________ Da ta S he et ________ of ________
Unit /C us to mer ______________________________________ S pec _____________________________________
P.O. /LC O File # ______________________________________ Ta g _______________________________________Item _______________________________________________ Dw g ______________________________________
C ont ra c t ____________________________________________ S ervic e ___________________________________
MFR S eria l# ________________________________________
CONTROL VALVESPEC SHEET
51
Asubsidiary of International, Inc.
12501 Teleco m Drive Tam pa, Florida 33637
(813) 978-1000 FAX: (813)-978-0984
8/10/2019 VA18 VA19
54/59
1700, 1700HP AND 1800 SERIES ORDERING
VALVE BODY INNER PARTS DISC CATALOG NUMBER PREFIXES
B ro nz e S ta inle s s S te elReg rinding 1702 1702HP 1805
Res ilient 1702G 1702G HP 1805G
Na va l B ro nz e Mo ne lR eg rin din g 1702NB M 1702NB MHP 1805NB M
Resilient 1702NBMG 1702NBMG HP 1805NBMG
S te el S ta inle ss S te elReg rinding 1709 1709HP 1809
Res ilient 1709G 1708G HP 1808G
Stainless Steel Stainless Steel Reg rinding 1706 1706HP 1810
Type 304 Type 303/304 Res ilient 1706G 1706G HP 1810G
Stainless Steel Stainless Steel Reg rinding 1707 1707HP 1811
Type 316 Type 316 Res ilient 1707G 1707G HP 1811G
Stainless Steel Stainless Steel Reg rinding 1708 1708HP 1812
Alloy-20 Alloy 20 Resilient 1708G 1708G HP 1812G
Monel MonelReg rinding 1708M 1708MHP 1812M
Res ilie nt 1708MG 1708MG HP 1812MG
FOR VERTICAL PIPE MOUNTING, ADD V TO CATALOG NUMBER PREFIX ABOVE
CATALOG PIPE &PORT CLASS &TYPE CV FLOW MAXIMUM INLET PRESSURE (PSIG)
#SUFFIX SIZE (INCHES) CONNECTIONS FATING SERIES 1700 SERIES 1700HP SERIES 1800
14 600 S c rew ed 3.0 300 1480
18 12 150 Fla nged 3.0 285 285
20 300 Fla nged 3.0 300 740
24 600 S c rew ed 6.8 250 1480 148028 34 150 Fla nged 6.8 250 285 285
30 300 Fla nged 6.8 250 740 740
34 600 S c rew ed 10.0 200 740 1480
38 1 150 Fla nged 10.0 200 285 285
40 300 Fla nged 10.0 200 740 740
44 600 S c rew ed 15.5 150 740 740
48 114 150 Fla nged 15.5 150 285 285
50 300 Fla nged 15.5 150 740 740
54 600 S c rew ed 22.5 100 740 740
58 112 150 Fla nged 22.5 100 285 285
60 300 Fla nged 24.0 100 740 740
65 250 S c rew ed 40 60 400 400
69 2 150 Fla nged 40 60 285 28571 300 Fla nged 46 60 740 740
73 250 S c rew ed 63 40 300 400
75 212 150 Fla nged 63 40 285 285
77 300 Fla nged 69 40 300 740
81 3 150 Fla nged 90 20 285 285
85 300 Fla nged 96 20 300 740
91 4 150 Fla nged 160 10 285 285
95 300 Fla nged 175 10 300 740
106 6 150 Fla nged 375 285 285
108 8 150 Fla nged 760 285 285
SERIES
1700
SERIES
1700HP
SERIES
1800
52
8/10/2019 VA18 VA19
55/59
CATALOG PIPE FACE HORIZONTAL PIPE MOUNTINGNUMBER SIZE TO
SUFFIX FACE B C D NETWEIGHT
14 3" 6" 9" 3-3/4" 12 lb .
18 1/2" 5-1/4 6 9-1/4 3-3/4 13
20 5 6-1/2 9-1/2 3-3/4 15
24 3-1/2 7-1/4 9-1/4 3-3/4 14
28 3/4 5 7-1/2 9-1/2 3-3/4 16
30 5-3/8 7-1/2 9-1/2 3-3/4 20
34 4 6-1/2 9 3-3/4 16
38 1 5-1/8 8 9-1/4 4-1/4 20
40 5-1/2 8-3/4 9-1/2 4-1/4 25
44 4-3/4 8 9-1/4 4-1/4 18
48 1-1/4 5-1/2 8 9-1/2 4-1/4 22
50 5-7/8 8 9-3/4 4-1/4 32
54 5-1/2 8-1/2 9-1/2 4-1/4 21
58 1-1/2 6-1/8 8-1/2 9-3/4 4-1/4 26
60 9 10-3/4 12-1/4 6-1/2 40
65 6 9 9-1/2 4-1/2 34
69 2 7-1/2 9-1/4 10-1/4 4-1/2 39
71 10-1/2 10-1/2 12-1/4 6-1/2 50
73 7-7/8 9-3/4 11-1/4 6-1/2 50
75 2-1/2 8-1/8 9-3/4 11-1/4 6-1/2 60
77 11-1/2 11-1/4 12-3/4 6-1/2 75
81 9-7/8 11 11-3/4 6-1/2 97
85 3 11-3/4 11 12-3/4 6-1/2 112
91 11-3/4 10-3/4 12-3/4 6-1/2 115
95 4 14 11-3/4 14 6-1/2 125
106 6 16 14-1/4 16 8-3/4 240
1700, 1700HP AND 1800 SERIES DIMENSIONS
- All ab ove dimensions and w eights are approximate, for estimating purposes only.
- Net weights are bas ed on a bronze valve.
CONSULT FACTORY IF FURTHER DETAILS ARE NEEDED
- All flange s d rilled p er ANSI B 16.5
- Valve bod ies ca n be rotated 180 to ac commo da te flow direction right to left. (Horizontal P ipe Mounting)
- If availab le headroom is limited, va lve ca n be furnished w ith valve bod y inverted - Add Z to suffix.
53
8/10/2019 VA18 VA19
56/59
ACTUATED
POSITION
(LATCHED)
NORMAL
POSITION
(TRIPPED)
3-WAY FLOW FORMS
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
FLOWFORM M FLOWFORM N FLOWFORM O FLOWFORM P
INLET AT A INLET AT C INLET AT B INLETS AT A & COUTLET AT B OUTLET AT B OUTLETS AT A &C OUTLETS AT A &C
VENT AT C VENT AT A
Each 3-way valve is factory adjusted for one of the
follow ing Flow Forms:
For Pilot Control:Form M - Supply normally closedLatch to open inlet port.
Trip to ve nt.
Form N - Supply normally openLatch to vent.
Trip t o o pe n inlet po rt.
For Directional Control:Form O - Diverting (one inlet, two outlets)
La tch to open normally c olsed outlet &c lose
normally open outlet.
Trip to reverse a bo ve a ction (return to normal
position).
Form P - Selecting (two inlets, one outlet)Latch to open normally closed inlet &close
normally open inlet.
Trip to reverse a bo ve a ction (return to normal
position).
54
8/10/2019 VA18 VA19
57/59
FIRE-SIDE SERIES SPEC SHEET
I have (or anticipate) a requirement for a Fire Safety Shut Off valve as follows:
Qua nt ity _________________P ipe S ize ________________ FM Approved
Fail Closed
2-way
Fail Open
Flow Form M - Pilot Control, Latch to Open
Flow Form N - Pilot Co ntrol, La tch to Vent
3-way
Flow Form O - Diverting
Flow Form P - Selecting
4-wa y Consult Facto ry
S um ma ry o f App lic a tio n_______________________________________________________________________________
Flu id Ha nd led _______________________________________________________ S pec . G ra v. _____________________
Visc os ity _____________________ C onc ent ra tion _____________________ Fre e of S o lids ? _____________________
Ma x In let P re s s ure ____________________________________ Min/Ma x Fluid Temp ____________________________
Flo w Ra te ___________________________________ Ma x Allow a b le P res s ure Dro p ____________________________
Tempera ture Ra ting of Fus ib le Link Des ired _____________________________________________________________
B od y Ma tl _____________________________________ Inn er P a rts ___________________ Va lve Dis c ______________
Screwed Ends Flanged 150 Flanged 300 Socketweld Buttweld Other_______________
Horizonta l P ipe Mounting Vertical Pipe Mounting- Up Flow Down Flow
Position Switch to Indicate- Valve Open Va lve C los ed S P D T DPDT
Other Des c rip tio n ____________________________________________________________________________________
Please send ____________ copies of an applicable dimension drawing.
Please send ____________ additional copies of Laurence On-Off Valves Handbook.
NAME __________________________________________________DEPT. OR TITLE ____________________________
COMPANY __________________________________________________PHONE NO. ____________________________
ADDRESS __________________________________________________________________________________________
________________________________________________________________FAX NO. ____________________________
QUESTIONS? CALL LESLIE CONTROLS @ (813) 977-0137 PLEASE FAX COMPLETED FORM TO: (813) 977-0174
SEEFLOW FORMSON OPPOSITE PAGE
FOR 3-WAY OPTIONS
55
8/10/2019 VA18 VA19
58/59
Notes:
56
8/10/2019 VA18 VA19
59/59
COMPRESSED AIREXTRACTION VALVEFORINDUSTRIALGASTURBINES
ATOMIZINGAIRBYPASSVALVE
FOR DUAL-FUELCOMBUSTION TURBINES
R E L I A B I L I T Y
Designed to take the heat
All S S interna ls, nothing to c orrod e
S uperior dep end a bility for over 15 yea rs
La sts ten times longe r than the others
T URBI NE AVAI L ABI L I T Y Elimina tes c ompress or surg e w ories
Dow ntime to reb uild is virtua lly e limina ted
QUI CK, EASY I NST AL L AT I ON
Direc t repla ce ment on G E and other Ga s Turbines
QD &QD P rem ium Delivery ava ila le
More Economical, Compact &GreaterCa pa city tha n G lob e Va lves
All Stainless Steel
Resilient Seat
Class VI Shutoff
Hig h Tem p Ac tua to r QD Delivery available