COVERALL SIZING LAPCO Manufacturing, Inc.98 Glenwood Street

Morgan City, La 70380Office: 985-385-5380

NOTE: When taking these measurements, use a cloth tape measure, not a metal one. Measurements should be taken over standard undergarments. If you plan to wearclothing beneath coveralls, order one size larger, to accomodate the extra garments.

ALPHA & NUMERIC SIZING

ALPHASIZES SMALL

34 38 42 46 50 54 58 62 66 70

MEDIUM LARGE XL 2XL 3XL 4XL 5XL 6XL 7XL

NUMERICSIZES

36

MAX CHESTMEASUREMENT

40 44 48 52 56 60 64 68 72

34” 38” 42” 46” 50” 54” 58” 62” 66” 70”36” 40” 44” 48” 52” 56” 60” 64” 68” 72”

To find your coverall size, measure your chest and inseam, and choose the corresponding size.If you are in between measurements, choose the larger size. If waist size is larger than chest size,use waist measurement to choose your size.

v3.14

Sizes are based on actual body measurements.

INSEAM LENGTHS

Length of Garment MeasurementCoverall Inseam

Short

Regular

Tall

28”

30”

32”

CHEST: Place 0” mark of the tape measure in the center ofyour chest. Tape should wraparound the broadest part ofthe chest, under the arms andresting across the shoulderblades, back to the center ofchest. Tape should be leveland laid flat, held neither tootight, nor too loose. The pointwhere the tape meets the 0”mark, (in the center front ofthe chest), is yourmeasurement.

INSEAM: Use a pair of pants that fit you well, (theyshould not be too loose aroundthe waist). Measure the inseam of the pants by positioning thetape’s 0” mark on the centerseam of the crotch, down theinside leg seam, to the hem.The point where the tapemeets the hem is the inseamlength.

WAIST: Place 0” mark of the tape measure in the center ofyour natural waist. Tape shouldwrap around the back to thefront center of waist. Tapeshould be level and laid flat,held neither too tight, nor too loose. Do not suck inyour stomach or you will geta false measurement. Thepoint where the tape meetsthe 0” mark is your waistmeasurement.

Extra Tall 34”

BIB OVERALLINSEAM LENGTHS

RecommendedLength of Garment Measurement

Coverall Inseam

Short

Regular

Tall

X-Tall

28”

30”

32”

34”

You should order this length:

FR DENIM & UNIFORM PANTS SIZING LAPCO Manufacturing, Inc.98 Glenwood Street

Morgan City, La 70380Office: 985-385-5380

BIB OVERALL SIZING

ALPHASIZES SMALL MEDIUM LARGE XL 2XL 3XL 4XL 5XL 6XL 7XL

•To find your pants size, measure your waist and inseam, then choose the corresponding size.•To find your denim bib size, choose the alpha size that matches your LAPCO shirt size.•If you are in between sizes, choose the larger size.

INSEAM LENGTHS

28 29 30 31 32 33

393837363534

WAIST SIZES

28 29 30 31 32 33

38363534 4240

44 46 48 50 52 54

PANTS & JEANS

INSEAM: Use a pair of pants that fit you well, (theyshould not be too loose aroundthe waist). Measure the inseam of the pants by positioning thetape’s 0” mark on the centerseam of the crotch, down theinside leg seam, to the hem.The point where the tapemeets the hem is the inseamlength.

WAIST: Place 0” mark of the tape measure in the center ofyour waist. Tape shouldwrap around the back to thefront center of waist. Tapeshould be level and laid flat,held neither too tight, nor too loose. Do not suck inyour stomach or you will geta false measurement. Thepoint where the tape meetsthe 0” mark is your waistmeasurement.

NOTE: When taking these measurements, use a cloth tape measure, not a metal one. Measurements should be taken over standard undergarments.

v4.14

Sizes are based on actual body measurements.

Denim Bib Overalls-Relaxed Fit and Carpenter Jeans-Uniform Pants

INSULATED CLOTHING SIZING LAPCO Manufacturing, Inc.98 Glenwood Street

Morgan City, La 70380Office: 985-385-5380

NOTE: When taking these measurements, use a cloth tape measure, not a metal one.

CHEST: Place 0” mark of the tape measure in the center ofyour chest. Tape should wraparound the broadest part ofthe chest, under the arms andresting across the shoulderblades, back to the center ofchest. Tape should be leveland laid flat, held neither tootight, nor too loose. The pointwhere the tape meets the 0”mark, (in the center front ofthe chest), is yourmeasurement.

INSEAM: Use a pair of pants that fit you well, (theyshould not be too loose aroundthe waist). Measure the inseam of the pants by positioning thetape’s 0” mark on the centerseam of the crotch, down theinside leg seam, to the hem.The point where the tapemeets the hem is the inseamlength.

ALPHA TO NUMERIC SIZING

ALPHASIZES

SMALL

34” - 36” 38” - 40” 42” - 44” 46” - 48” 50” - 52” 54” - 56” 58” - 60” 62” - 64” 66” - 68”

MEDIUM LARGE XL 2XL 3XL 4XL 5XL 6XL 7XL

INSEAM LENGTHS

Length of Garment MeasurementCoverall Inseam

Regular

Tall

30”

32”

CHEST/WAISTMEASUREMENT

If you are between measurements, choose the larger size.

v3.14

Sizes are based on actual body measurements.

WAIST: Place 0” mark of the tape measure in the center ofyour natural waist. Tape shouldwrap around the back to thefront center of waist. Tapeshould be level and laid flat,held neither too tight, nor too loose. Do not suck inyour stomach or you will geta false measurement. Thepoint where the tape meetsthe 0” mark is your waistmeasurement.

• To find your jacket size, measure your chest. • For insulated coverall sizing, use chest and inseam measurements. If your waist size is larger than your chest size, use your waist measurement to choose your size. • To find your size in our insulated bib overall, use your waist and inseam measurements.

Jackets-Coveralls-Bib Overalls

30” - 32”

*waist measurements are for the natural waist NOT pants size

Helpful Hint: If you plan to wear clothing, in addition to undergarments,beneath your insulateds, choose a larger size to accomodate

the extra garments.

3XL

4XL

SMALL

ALPHASIZE

MEDIUM

LARGE

XL

6XL

5XL

SHIRTS SIZING LAPCO Manufacturing, Inc.98 Glenwood Street

Morgan City, La 70380Office: 985-385-5380

NOTE:

When taking these measurements,use a cloth tape measure,not a metal one. Measurements should be taken overstandard undergarments.

NECK: Place 0” mark of the tape measure in the center ofyour neck. Tape should wraparound the neck, under the chinresting comfortably at yourcollar line, back to the centerfront of neck. Tape should belaid flat, held neither tootight, nor too loose. The pointwhere the tape meets the 0”mark, (in the center front ofthe neck), is yourmeasurement.

SLEEVE: To measure yoursleeve length, start at thecenter of the back belowthe back of the neck, andmeasure the distance to theshoulder seam. Next, measurethe distance from shoulderseam to bottom of cuff.Finally, add these two numbers to get your sleevelength.

ALPHA TO NUMERIC SIZING

NECKSIZE

To find your shirt size, use your neck and sleevemeasurements. If you are in between sizes,choose the larger size.

v12.13

EXTRALONG

LONGMEDIUM/REGULARSHORT

SLEEVE LENGTH MEASUREMENTS

14.5

16.5

16

15.5

15

19

18

17.5

17

22

20

24

23

34333231

36353433

35343332

35343332

38373635

37363534

37363534

37363534

36353433

39383736

39383736

38373635

39383736

2XL

LADIES' ADVANCED COMFORT UNIFORM PANTS LAPCOFR™

MISSES SIZING

I SIZE 0 2 4

WAIST 29 30 31112

HIP 3s112 37 39112

WOMENS SIZING

I SIZE 18 20 22

WAIST 42112 44112 45112

HIP 48 so S2

Note:

MID-WAIST Place the O" mark of the tape measure in the center of your waist. Tape should wrap around the back to the front center of waist. Tape should be level and laid flat, held neither too tight, nor too loose. Do not suck in your stomach or you will get a false measurement. The point where the tape meets the O" mark is your waist measurement.

HIP Stand with feet shoulder width apart and place the O" mark of the tape measure in the center front of body at widest part of hip. Tape should wrap around the back to the front center. Tape should be level and laid flat, held neither too tight, nor too loose. The point where the tape meets the O" mark is your hip measurement.

INSEAM Use a pair of pants that fit you well, (they should not be too tight or too loose around the waist). Measure the inseam of the pants by positioning the tape's O" mark on the center seam of the crotch, down the inside leg seam, to the hem. The point where the tape meets the hem is the inseam length.

6 8 10

33 34 3s112

39112 41 42112

24 26

48 so

S4 S6

12

37

44

AVAILABLE INSEAMS

14

39112

46

SHORT

REG

TALL

16

40112

48

30

32

34

If your measurements fall between sizes, choose the larger size.

Important: Always use the larger measurement, between the waist and the hip, to determine your size.

LADIES' ADVANCED COMFORT UNIFORM SHIRTS LAPCOFR™

MISSES SIZING SIZE XS

BUST 32-34

WAIST 30-32

SLEEVE 30

> J: REGULAR 27 Cb Oz al w LONG 29 ...J

WOMENS SIZING SIZE 2XL

BUST 44-46

WAIST 42-44

SLEEVE 321/2

> J: REGULAR 291/4 Cb Oz al w LONG 31 1/4 ...J

BUST Place the O" mark of the tape measure in the center of your chest. Tape should wrap around the back to the front center of largest part of the bust. Tape should be level and laid flat, held neither too tight, nor too loose. The point where the tape meets the O" mark is your bust measurement.

NATURAL WAIST Place the O" mark of the tape measure in the center of your natural waist. Tape should wrap around the back to the front center of waist. Tape should be level and laid flat, held neither too tight, nor too loose. Do not suck in your stomach or you will get a false measurement. The point where the tape meets the O" mark is your waist measurement.

SLEEVE Begin at the middle of the upper back, slightly below the nape of your neck. Measure the length from the middle of the upper back to the stitching located at the shoulder of the shirt. Write this measurement down, as you will need it later. Measure the length from the top stitching on the shoulder to the bottom of the wrist. Aim for hitting your wrist bone with the measuring tape. Add these two values together to find your sleeve length.

BODY LENGTH AT BACK Begin at the high point of shoulder, on back of shirt, and measure straight down to shirt hem.

Note: If your measurements fall between sizes, choose the larger size.

Important: Always use the larger measurement, between the bust and waist, to determine your size.

SM MED LG XL

34-36 36-38 38-42 42-44

32-34 34-36 36-40 40-42

30112 303/4 31 1/4 3l3/4

271/4 271/2 28 281/2

291/4 291/2 30 30112

3XL 4XL SXL 6XL

46-48 48-50 50-52 52-54

44-46 46-48 48-50 50-52

33 331/2 341/4 343/4

30 30112 31 311/2

32 321/2 33 331/2

WELDING CAPS SIZING LAPCO Manufacturing, Inc.98 Glenwood Street

Morgan City, La 70380Office: 985-385-5380

MEASURING TIPS

6 3/4 21 1/8”Things you will need:

· A cloth measuring tape OR string and standard measuring tape.

How to measure:

1. Hold the end of the cloth tape measure to themiddle of your forehead. If you are using a standardmetallic tape measure, use a piece of string.

2. Wrap the tape or string around your head untilyou return to the starting point. It should be aboveyour ears, resting at the point you would like yourhat to rest.

3. Make sure the tape measure or string is snugaround your head, but not too tight. It should becomfortable, and just �tted enough to stay put.

4. Jot down your measurement in inches. If youused string, measure the string against your tapemeasure.

5. Use the size chart at right, to determine whichsize will be your best �t. If you are between sizes,choose the larger size.

HEADMEASUREMENTCAP SIZE

6 7/8 21 1/2”

8

7 7/8

7 3/4

7 5/8

7 1/2

7 3/8

7 1/4

7 1/8

7

25”

24 5/8”

24 1/4”

23 7/8”

23 1/2”

23”

22 5/8”

22 1/4”

21 7/8”

• To find your welding cap size, measure the circumference of your head.

BAG SIZE INCHES

SMALL 12 X 12 X 24

MEDIUM 12 X 12 X 30

LARGE 14 X 14 X 36

X-LARGE 16 X 16 X 36