Embed Size (px)
DESCRIPTION
This shows how you can install creo for students
Citation preview
Installing Creo® 2.0 (Student Edition) for ATC’s Student
Author : Karthik K
Creation Date : August, 01, 2012
Last Updated : October, 29, 2012
Revision Number : 1.0
Document Ref : None
Page 2 of 21
Document Control
Warning: This proposal was prepared specifically for the PTC Product Installation in PTC’s ATC. It remains the property of PTC and its contents cannot be disclosed to any third party without PTC’s consent.
Attention: This proposal is based on the implementation of the following version of software. Use of alternative versions will require modifications to the estimate.
Name Release
Creo® 2.0 M010
Operating System Windows 7 – 64 Bit
Document Control
Date of Preparation October, 29, 2012
Expiration Date NA
Customer Document Revision Number 2.0
Status: DRAFT / RELEASE RELEASE
Page 3 of 21
Contact Details
Prepared By Karthik K
Title Program Manager - India ATC
Address 1 4th Floor, Pheonix Towers,
Address 2 #16 Museum Road ,
Bangalore 560 0025
E-mail Address [email protected]
Mobile Number +91-99455 13154
Page 4 of 21
Table of Contents
Document Control ............................................................................................................................................................. 2
Contact Details .................................................................................................................................................................... 3
General Installation Steps .............................................................................................................................................. 5
License generation through setup ......................................................................................................................... 5
Independent License generation ............................................................................................................................ 5
Step: 1 - Getting Started .................................................................................................................................................. 6
Overview .......................................................................................................................................................................... 6
Available Key Features / Modules ......................................................................................................................... 6
System Requirements ................................................................................................................................................. 7
Windows XP (Base OS Service Pack 1, 2, and 3) .......................................................................................... 7
Windows 7 (Base OS) ............................................................................................................................................. 7
Main Memory ............................................................................................................................................................. 7
Internal Browser Support ..................................................................................................................................... 8
Graphics Cards .......................................................................................................................................................... 8
Network ....................................................................................................................................................................... 8
Monitor ........................................................................................................................................................................ 8
File Systems ................................................................................................................................................................ 8
Mouse ........................................................................................................................................................................... 8
Distribution Media................................................................................................................................................... 8
Features Specific to Creo Student Edition ........................................................................................................... 8
Step: 2 - Generating a Product Code........................................................................................................................... 9
Step: 3 - Opening a PTC Online Account ................................................................................................................ 10
Step: 4 - Installing Creo Student Edition ............................................................................................................... 12
Step: 4a - Generating a License ................................................................................................................................. 16
Step: 4b - Installing Creo Student Edition (Offline)........................................................................................... 18
Page 5 of 21
General Installation Steps You should follow any one of the below steps for installation. For any of the below steps below are the pre requesters.
1. Getting Started 2. Generating a Product Code 3. Opening a PTC Online Account
License generation through setup
Need Internet Connection on Installation Machine
4. Installing Creo Student Edition
Independent License generation
No need of Internet Connection on Installation Machine
4a. Generating a License (from www.ptc.com )
4b. Installing Creo Student Edition (offline)
Page 6 of 21
Step: 1 - Getting Started
Welcome to Creo Student Edition on one DVD-ROM. PTC hopes that you enjoy using the world’s most popular 3D MCAD solution. This guide provides instructions on the installation and implementation of the software.
Overview
Creo, PTC’s new family of design software, delivers breakthrough technologies that address unsolved 2D and 3D problems. Creo enables students to prepare for careers in 3D CAD design with the same award-winning ease-of-use, performance and functionality found in the standard Creo, used in 25,000 world-leading product development companies.
What does Creo mean for students?
Easy to Learn, Easy to Use:
Creo combines easy-to-use modules such as 2D drafting and 3D direct with powerful 3D parametric capabilities so you can bring your most creative ideas to life – fast.
Develop Real-World Professional Design Skills:
The Academic Edition features the same advanced Creo technology used by hundreds of thousands of professionals worldwide. That means the skills you develop now will be immediately transferable to the professional world.
Jumpstart Your Career:
Learning Creo prepares you for careers in the world’s most successful companies. With 600,000+ seats of active software, Creo users are five times more likely to be hired by businesses with exciting opportunities for young engineers beginning their careers.
Available Key Features / Modules
Creo Parametric Creo Parametric Foundation Creo Advanced Rendering Creo Legacy Migration Creo Language Chinese Creo Flexible Modeling Creo CAM Lite Creo Behavioral Modeling Creo Mechanism Dynamics Creo Advanced Assembly Creo Expert Framework Creo ECAD-MCAD Collaboration Creo Complete Machining Creo NC Sheetmetal Option Creo Computer-aided Verification Option Creo Plastic Advisor
Page 7 of 21
Creo Expert Moldbase Creo Progressive Die Creo Complete Mold Design Tolerance Analysis Creo Spark Analysis Creo Interactive Surface Design Creo Piping & Cabling Extension Creo Manikin Creo Manikin Analysis Creo Simulation Creo Advanced Simulation Creo Direct
System Requirements
Creo 2.0 Student Editions are only supported on certified 32-bit and 64-bit and Windows platforms.
Windows XP (Base OS Service Pack 1, 2, and 3)
Windows XP Home Edition Windows XP Professional Edition Windows XP Professional x64 Edition (Base OS Service Pack 2)
Windows 7 (Base OS)
Windows 7 Professional Edition Windows 7 Professional x64 Edition Windows 7 Ultimate Edition Windows 7 Ultimate x64 Edition Windows 7 Enterprise Edition Windows 7 Enterprise x64 Edition
The following specifications are the minimum requirements to successfully run this edition.
Main Memory
Windows 7 64-bit : 3 GB+ (4GB optimal) Windows 7 32-bit : 3 GB* Windows XP x64 (64-bit) : 3 GB+ (4GB optimal) Windows XP (32-bit) : 3 GB*
* 32-bit operating systems can physically allocate only 3GB of RAM. RAM greater than 3GB (if installed) will remain un-utilized
Page 8 of 21
Internal Browser Support
Microsoft Internet Explorer 9.0 (with M010 release and later) Microsoft Internet Explorer 8.0 Microsoft Internet Explorer 7.0 Microsoft Internet Explorer 6.0 (SP1 or later) Mozilla based browser (embedded with Creo 2.0)
Graphics Cards
Cards must support OpenGL**. For supported graphics cards, see http://www.ptc.com/WCMS/files/127428/en/creo1_hw_notes.pdf .
* * Understanding the user demographic for all edition, it is required that the edition be able to run without OpenGL. This is primarily due to the fact that users might be using this edition on home desktop machines and the available graphics cards may not support OpenGL. In order to address this issue in the event that users graphics card does not support OpenGL, PTC will include Software OpenGL technology into the installation.
This will be controlled by a new config.pro option called use_software_opengl=yes. When activated, Creo 2.0 will utilize the software OpenGL and ignore the standard graphics config.pro option.
Network
Microsoft TCP/IP, Ethernet network adapter
Monitor
1024 X 1024 or higher resolution with 24-bit or higher color
File Systems
NTFS
Mouse
Microsoft approved 3-button mouse
Distribution Media
Downloadable installation executable or DVD
For additional information on platform support details, please review the official http://www.ptc.com/WCMS/files/127428/en/creo1_hw_notes.pdf
Features Specific to Creo Student Edition
Creo Student Edition is different from the commercial software in the following ways:
No access to floating options Student Edition banners on the borders of plots and drawings Online registration and license generation process
Page 9 of 21
Step: 2 - Generating a Product Code
Use the below Product code & it is same for Creo 2.0
o BK390206EDSTUDENTUNICL
Page 10 of 21
Step: 3 - Opening a PTC Online Account
You must have a PTC online account to generate a license and use the software. If you already have an online PTC account, skip to the next chapter. Otherwise, on a computer connected to the Internet, create your online account using these instructions.
Click https://www.ptc.com/appserver/common/account/student.jsp The New Account page opens.
Fill in any empty text boxes.
Page 11 of 21
Click Create Account. A confirmation page opens.
Review and print this confirmation. A confirmation of your account is sent to your e-mail address.
Page 12 of 21
Step: 4 - Installing Creo Student Edition
Start the installation by running setup.exe from the DVD media
Select “Install New Software” and click Next
Page 13 of 21
Accept the license agreement by checking “I Accept the License Agreement”
click Next to continue
Enter the student edition product code (copy > past the Product Code from www.ptcgsindia.com). Click 'Install Licensing' to generate the license file.
Page 14 of 21
A new window will ask for the www.ptc.com User name & Password.
Once created, setup will add the license file to the license summary section. Click Next
Page 15 of 21
Validate the Installation Path & Select the applications to be installed. Click Install
Select Finish exit the PTC Installation Assistant
Page 16 of 21
Step: 4a - Generating a License
On a computer connected to the Internet, use the following instructions to submit a license request:
Click www.ptc.com/go/studentlicense4creo2 A PTC.com login page opens.
Log in with your user name and password. The Creo 2.0 Student Edition Licensing page opens. Most of the text boxes are filled, except for the Product Code and Host ID text boxes
o In the Product Code text box, copy > past the Product Code from www.ptcgsindia.com .
o In the Host ID text box, type the Host ID (same you entered in www.ptcgsindia.com ) of the computer on which you want to install Creo Student Edition.
Click Submit Request.
Page 17 of 21
A confirmation page opens. 6. Review the information before you close the browser.
A License Pack is generated based on your information and arrives by e-mail
Page 18 of 21
Step: 4b - Installing Creo Student Edition (Offline)
Start the installation by running setup.exe from the DVD media
Select “Install New Software” and click Next
Page 19 of 21
Accept the license agreement by checking “I Accept the License Agreement” click Next to continue
With existing license files should use this section to enter the path or to drag and drop the file into the text box provided. The installation will begin automatically.
Page 20 of 21
Once the installation has completed the Status should show as Available
Page 21 of 21
Validate the Installation Path & Select the applications to be installed. Click Install
Select Finish exit the PTC Installation Assistant
