13
Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

Embed Size (px)

DESCRIPTION

© 2014 Utilities Telecom Council 3 Protective Relaying

Citation preview

Page 1: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

Utility and Energy ApplicationsATIS Public Safety Related Applications Task ForceSeptember 24, 2014

Page 2: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 2

Utility & Energy Public Safety Related Applications

• Protective Relaying• Wide Area Protection Schemes• Special Protection Schemes• Synchrophasor Data• Supervisory Control and Data Acquisition (SCADA)• Radio Control and Dispatch • Telephone Lines

Page 3: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 3

Protective Relaying

Page 4: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 4

Special Protection Schemes

Page 5: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 5

Synchrophasor Data

Page 6: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 6

SCADA

Page 7: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 7

Radio Control and Dispatch

Page 8: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 8

Telephone Lines

Page 9: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 9

Utility and Energy Requirements

Circuit Type Bandwidth Latency Jitter ReliabilityProtection Level 1 *** 64-256Kbps 16 msec * 99.95%Protection Level 2 *** 64-128Kpbs 16 msec * 99.90%Protection Level 3 *** 64Kbps 33 msec * 99.50%Protection Level 4 *** 64Kbps 33 msec * 95%Special Protection Schemes/Remedial Action Schemes ** 64-256Kbps 16 msec * 99.95%Synchrophasor up to 1.5Mbps 50 msec 10 msec *Transmission SCADA 19.2Kbps 2 sec N/A 99%Distribution SCADA 9.6Kbps 5 sec N/A 95%Radio Dispatch 8-64Kbps 1 sec N/A 99%Telephone 8-64Kbps 1 sec N/A 99%

Typical Communications Performance Requirements for DS0 Based Circuits

* Relay dependent, see manufacturers requirements** Utility Defined depending upon function*** Protective Relaying Levels as defined by WECC, other governing bodies may have more restrictive requirements

Page 10: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 10

Affected Technologies Provided by Carriers

• DS0 circuits• DS1 circuits• Frame Relay

This is not a one-step migration; it’s a two-step migration – both layer 1 (physical

transport) and layer 2 (protocol)

Page 11: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 11

Alternative Technologies/ISO Layer Representation

Page 12: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

© 2014 Utilities Telecom Council 12

Other Stakeholder Organizations

• Edison Electric Institute• National Rural Electric Cooperative Association• American Public Power Association• American Petroleum Institute• American Water Works Association• Electric Power Research Institute (EPRI)

Page 13: Utility and Energy Applications ATIS Public Safety Related Applications Task Force September 24, 2014

www.utc.org© 2014 Utilities Telecom Council

QUESTIONS