Using the Nzi trap.

The Nzi trap uses four wooden poles….

…so first you need to cut these yourself.

Hammer four nails into the top of the centre pole.

Having made four poles, you now….

...clear a site for the trap.

Hammer the centre pole into the ground.

Fit the trap cone over the centre pole and….

…stretch the trap out so that...

..you can see where to place the other poles.

Hammer these poles into the ground...

….and attach the trap to these with wire.

Do the same with the second corner...

…and with the third.

The trap cone is supported on the nails.

Fit a plastic bag to the top of the cone...

….and there you have it!