Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
revolution11.com 1
Using the AWS IoT
Button Wi-Fi App
What is the AWS IoT Button Wi-Fi App?
The Amazon Web Service (AWS) IoT Button Wi-Fi App is an application published by Amazon
that allows the end user to set the button’s Wi-Fi network. The application does not allow the end user to change the button’s functionality. An AWS account is NOT required to use this application.
The Root User is authenticated with their email and password to log on.
Download and Install the App on Your Android or iOS Device
Setting or Changing the Wi-Fi Network on the AWS IoT Button
1. Open the app on your phone or tablet and press “Setup AWS IoT Button Wi-Fi”.
revolution11.com 2
2. On the next screen press “Scan DSN Barcode” (Device Serial Number). This brings up the
scanner in your camera app to scan the barcode on the box.
revolution11.com 3
3. Give the app permission to use your camera on first use.. Click “OK”.
revolution11.com 4
4. Position the scanner box in the camera app at the bottom barcode on the box flap. *See
instructions below if you do not have the box with the sticker label.
revolution11.com 5
5. Once the scanner captures the barcode, it will show the DSN in the next screen of the app.
Press “Configure Button”
revolution11.com 6
6. Press the physical button on the device for about 6 seconds until it flashes blue. Once it is
flashing, press the button at the bottom of the screen that says “Copy Password And Go To Settings”.
revolution11.com 7
7. On the Wi-Fi Settings Screen, under Choose a Network, select the Button Configuration
from the Wi-Fi Networks.
revolution11.com 8
8. When prompted for the network password, paste the password that is stored on the
device’s clipboard.
revolution11.com 9
9. Return to the app, choose the Wi-Fi network to attach the button to and enter the
password for that network.
revolution11.com 10
10. Press “Confirm Wi-Fi”.
revolution11.com 11
11. You will see this message while the button is connecting to the new network.
12. Once the button has joined the new network you will get a confirmation screen. Press “Done”. Congratulations, you have set up your AWS IoT button on a new Wi-Fi network!
revolution11.com 12
*Instructions For Lost Box Barcode
If you do not have the box with the barcode that the button came in, there is a QR Code on the back of the button itself that represents the Device Serial Number (DSN). The DSN is also
printed on the back of the button. Download a QR Scanning App from Apple’s App Store or Google’s Play store if you don’t have a QR Scanning app on your device already.
1. Open your scanning app and scan the QR Code on the right hand side of the back of the button. Once the QR Code is Scanned, copy the DSN.
2. Open the AWS IoT Button Wi-Fi App and press the “Setup AWS IoT Button Wi-Fi” button at
the bottom of the screen.
revolution11.com 13
3. Click on “Manually Enter DSN”.
4. On the next screen, click into the DSN field.
revolution11.com 14
5. Paste the DSN from the clipboard (type it manually if you could not scan it).
revolution11.com 15
6. Click on “Configure Button” and change the Wi-Fi Network by following the instructions
above.
Have Questions?
Revolution11 provides a free initial consultation.
Let’s have a discussion on how Cloud Services or
Smart Things can improve your business processes.
Contact Revolution11 to get started today.
1.415.969.8595 • [email protected]