Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
USING INTRAMAPS TO CREATE A SCALED SITE PLAN FOR A BASIC BUILDING/
PLANNING APPROVAL:
Click on property tab (bottom of page) & enter “lot” or “house number”, enter details then click ‘search’.
On the left hand side select ‘Building’ to show lot dimensions & building outline. To print click the print
icon and select the scale that is most appropriate from the drop down menu (i.e. 1:100; 1:200; 1:300)
Amend plan to reflect existing and proposed structures on site
It should be noted that the City accepts no responsibility for the accuracy of information and
information is intended as a guide only. Applicants should ensure that plan submitted for applications
reflects existing structures and setbacks onsite.
USING INTRAMAPS FOR BASIC PROPERTY INFORMATION
(i.e. lot size, zoning etc):
Click on property tab at bottom of page to enter “lot” or “house number”, enter details then
click ‘search’.
On the right hand side property information tabs will come up (highlighted in blue).
It should be noted that the City accepts no responsibility for the accuracy of information and
information is intended as a guide only.
USING INTRAMAPS FOR BASIC PROPERTY INFORMATION (CONT)
On the left hand side select ‘Building’ to obtain information such as lot dimensions, building
outlines, aerial view etc.
On the left hand side select ‘TPS7’ to obtain information such as zoning (highlighted in blue)
It should be noted that the City accepts no responsibility for the accuracy of information and
information is intended as a guide only.