Using for the first time Operation Drying Changing the programme sequence Fragrance flacon

M.-

Nr.

11 6

63 4

9000FragranceDos – the dryer has two

positions for inserting a fragrance flacon. Use one or both whenever you want to add a pleasant fragrance to your laundry.

Close the unused socket.

Before using a fragrance flacon, please read "Warning and Safety instructions - Using a fragrance flacon (optional accessory)" and "Fragrance flacon" in the operating instructions.

Inserting a fragrance flacon1. 2.

3. 4.

Markers and must line up with each other.

5. 6.

ĺ Turn the outer ring clockwise a little.

Markers und must line up with each other.

Before drying ĺ Turn the outer

ring clockwise a little.

The further you open the flacon, the more intense the fragrance.

After dryingTo avoid the fragrance escaping needlessly:

ĺ Turn the outer ring anti-clock-wise until marker is in position .

When not in use, you can store the fragrance flacon in its original packag-ing.

Before cleaning the fluff filters ĺ Remove the

fragrance flacon.

ĺ Only store the fragrance flacon in its original packaging.

Never lay the fragrance flacon down. Otherwise, the fragrance will leak out.

TWJ6

60W

Pen

- A

U, N

Z

ɑ Before using the tumble dryer for the first time, ensure that it is correctly installed and connected. Please read the separate operating instructions supplied with the appliance.

ɑ Damage caused by switching the appliance on too soon. This can damage the heat pump. After setting up the tumble dryer, wait for at least one hour before starting a drying programme.

Energy saving tips

To avoid unnecessarily long drying times and high consumption of energy: – Spin the laundry at the maximum spin speed in the washing machine.

– Clean the fluff filters in the door and in the door opening after every drying cycle.

– Load according to the optimum amount of laundry recommended for the programme being used. This will mean that the energy consumption for the amount of laundry is at its most economical.

– Make sure the room temperature is not too high. If there are other heat producing appliances in the room in which the tumble dryer is located, make sure the room is well-ventilated and switch the other appliances off, if possible.

1. Notes on correct laundry care ɑ Ensure that any foreign objects (e.g. detergent

dispensing balls, lighters, etc.) have been removed from the laundry. Such items could melt or explode and cause damage to the dryer or the laundry.

ĺ Sort the laundry according to the type of fibre and weave, size, garment care label symbol and the drying level required.

ĺ Check seams and stitching to ensure that padding and linings are intact.

ĺ Fasten duvet covers and pillow cases to prevent small items from being rolled up inside them.

ĺ Fasten hooks and eyes. ĺ Tie together textile belts and apron ties. ĺ Sew in or remove loosened underwiring from bras.

OP

ER

ATIO

N

DR

YIN

G

CH

AN

GIN

G T

HE

PR

OG

RA

MM

E S

EQ

UE

NC

E

Switching on the tumble dryer ĺ Turn the programme selector to a programme.

The welcome tone will sound and the welcome screen will light up. The display will guide you through the initial commissioning process, which is divided into several steps.For further information, please refer to the separate operating instructions.

Emptying the condensed water container

Empty the condensed water container after every drying programme.

Empty container See will light up in the display if the maximum level of the condensed water container is reached.To turn the message off: Open and close the door while the dryer is switched on.

ĺ Pull out the con-densed water container.

ĺ To prevent water running out, keep it in a horizontal position when carrying it. Hold it at the front and at the back.

ĺ Empty the condensed water container.

ĺ Replace the container in the dryer.

ɑ Do not drink condensed water. It can cause health problems in people and animals.

Adding or removing laundryYou have forgotten an item of laundry, but the programme has already started. ĺ Touch the Start/Add laundry sensor.

Door can be opened lights up in the display.* ĺ Open the door. ĺ Add or remove laundry. ĺ Close the door. ĺ Touch the Start/Add laundry sensor.

The programme will start.* Exceptions:In some cases, e.g. during the cooling phase or in the Proofing programme, you cannot add laundry.

Cancelling a programme while it is running and selecting a new programmeIt is no longer possible to change the selected programme. This prevents the appliance being operated unintentionally, e.g. by children.If you adjust the programme selector, Cannot be changed will light up in the display. This indicator goes out when you select the original programme again. ĺ Turn the programme selector to the  position.

The programme is cancelled. ĺ Select a programme. ĺ Touch the Start/Add laundry sensor.

1 Control panel The control panel consists of a display and various sensor controls.

2 Display Different values are displayed and/or selected in the display.

3 sensors The values in the display can be changed with the sensors.

4 OK sensor The OK sensor is used to confirm selected values

5 Perfect Dry indicator With programmes with a selectable drying level, the Perfect Dry system calculates the residual moisture present in the laundry to ensure the best drying result. The display flashes at the beginning of the programme and lights up towards the end of the programme.

6 Optical interface For service technicians.

7 Sensor controls for Extras You can supplement the drying programmes with Extras.

8 sensor You can use the sensor to call up an energy consumption forecast for the selected drying programme.

9 sensor The sensor starts the Delay start function.

10 Start/Add laundry sensor Touching the Start/Add laundry sensor starts the selected programme. The current programme can be interrupted to add laundry. The sensor flashes slowly as soon as it is possible for a programme to be started and then lights up constantly after the programme has started.

11 Programme selector For selecting programmes and switching the washing machine off. The dryer is switched on by selecting a programme, and switched off by turning the programme selector to the position. Under Further programmes/ you will find the Wash2Dry function as well as additional programmes and the option to change Settings.

Operating the sensorsThe sensors react to fingertip contact. Selection is possible as long as the respective sensor is illuminated.If a sensor is brightly lit this means: currently selectedIf a sensor is dimly lit this means: selection possible

2. Selecting a programme ĺ Turn the programme selector to a programme.

The interior drum lighting will come on.

Programme selectionThere are 3 possible ways to select a programme:1. Selecting standard programmes via the programme selector ĺ Turn the programme selector to the required programme. The selected programme will appear in the display. This will then be replaced by the standard display.

2. Selecting further programmes via the "Further programmes/" setting and the display: ĺ Turn the programme selector to the Further programmes/ position. Touch the sensors until the programme you want appears in the display.

ĺ Confirm the programme with the OK sensor.Selecting the Wash2Dry functionOnce the washing machine programme has completely finished, the drying programme tailored to the laundry will be displayed. ĺ Once the wash programme has ended, place the clean laundry in the tumble dryer and close the door.

ĺ To start the programme, all you need to do is press the Start/Add laundry sensor on the tumble dryer.

3. Selecting programmes via the MobileStart function and the Miele@mobile App ĺ Turn the programme selector to the MobileStart  position. ĺ Follow the instructions in the display. ĺ Touch the Start/Add laundry sensor.

The dryer can now be operated via a mobile device together with the Miele@mobile App.

4. Selecting programme settings

Programmes with drying levelsCottons, Minimum iron, Delicates, Pre-ironing, Shirts, Express, Denim, Outerwear, Sportswear, Bed linen, Automatic plusThe preset drying level for the programme can be changed. ĺ Touch the or sensors to change the drying level.

Timed drying programmes and other programmesWarm air, Cool air, Basket programme, DryFreshYou can change the duration in 10-minute increments. ĺ Touch the or sensors to change the duration.

Cottons , Woollens handcare, Pillows, Proofing, Silks handcareThe drying result is preset by the dryer and cannot be altered.

Selecting Extras ĺ Touch the sensor for the Extra you want. It then lights up brightly.

Freshen upFor removing or reducing odours in clean (dry or damp) clothing.Gentle tumbleLow temperature drying for delicate fabrics with the symbol on the care label, e.g. acrylic garments.Anti-creaseThis helps prevent creasing if the laundry is not removed immediately after the end of the programme.BuzzerAcoustic signal at the end of a programme.

EcoFeedbackYou can use the sensor to call up an energy consumption forecast for the selected drying programme. ĺ Touch the sensor.

The estimated energy consumption will be displayed as a bar chart.

Delay start/SmartStartDelay startWith Delay start you can delay the start of a programme. The start of the programme can be delayed from 15 minutes up to a maximum of 24 hours.SmartStartThe SmartStart function (only functional in selected countries) lets you define a period of time during which your washing machine will start automatically. The dryer will start on receipt of a signal, e.g. from your energy supplier, that indicates that the electricity rate is particularly economical.

5. Starting the programme ĺ Touch the flashing Start/Add laundry sensor.

The Start/Add laundry sensor lights up.

1 Condensed water container – empty after every drying programme

2 Door3 Control panel4 Access panel for the heat exchanger and plinth filter

– Do not open during drying5 Cool air intake grille

– Do not obstruct with a laundry basket or other objects

3. Loading the tumble dryer ĺ Open the door.

ĺ Unfold the laundry and load loosely into the drum.

ɑ Do not overload the drum. Overloading can cause unnecessary wear and tear of the laundry, give a disappointing drying result and cause more creasing.

ɑ If you are not using a fragrance flacon: the tabs must be pushed down completely (see arrows) to ensure both sockets are closed.

ɑ When closing the door, make sure that laundry does not get trapped in the door opening. ĺ Shut the door with a gentle

swing.

6. End of programme - unloading the drum

The programme is finished when Finish/Anti-crease or Finish appears in the display. The Start/Add laundry sensor light goes out. – To save energy, 10 minutes after the end of the programme the Start/Add laundry sensor will begin to flash slowly and the display will go out.

– The tumble dryer switches off automatically.

ɑ Do not open the door before the end of the programme.

ĺ Open the door. ĺ Remove the laundry.

ɑ Check that all items have been removed from the drum. If items are left in the dryer, they could be damaged by overdrying when the dryer is used the next time.

If the dryer is switched on at the mains and the door is opened, the drum lighting will come on. It will go out after a few minutes to save energy. ĺ Turn the programme selector to . ĺ Clean the fluff filters. ĺ Close the drum door. ĺ Empty the condensed water container.

Adding laundryYou can add laundry. ĺ Follow the instructions in "Changing the programme sequence".

en - AU, NZ M.-Nr. 11 663 490

Quick Start GuideHeat pump tumble dryer

These short instructions are not a substitute for the operating instructions supplied with the appliance. Please read the operating instructions supplied with your tumble dryer before using it for the first time.Take note of the Warning and Safety instructions, as well as the full descriptions on how to use your appliance.

Cleaning and care Problem solving guide

Fluff filters

Removing visible fluff

Clean the fluff filters in the door opening after every drying cycle.

Remove the fragrance flacon (if fitted).

ĺ Pull the upper fluff filter forwards to remove it.

ĺ Use your fingers or a vacuum cleaner to remove the fluff from the surface of the filter.

ĺ Push the upper fluff filter back in until it clicks into position.

ĺ Close the door.

Cleaning the fluff filters and air flow openings thoroughly

If the drying duration has become longer or the surface of the filters is visibly compacted with fluff, you should carry out the following cleaning procedure.

ĺ Pull the upper fluff filter forward to remove it.

ĺ Turn the yellow dial on the lower fluff filter in the direction of the arrow (until you hear it click).

ĺ Hold the dial and pull the fluff fil-ter forwards to remove it.

ĺ Use a vacuum cleaner with a long crevice noz-zle attached to remove any visi-ble fluff from the upper air flow openings.

ĺ Flush the fluff filters through with warm running water.

ĺ Shake the fluff filters thoroughly and then dry them carefully.

Ensure the filters are dry before replacing them. Wet filters could cause operational faults.

ĺ Refit all of the fluff filters and close the door.

CLE

AN

ING

AN

D C

AR

E

PR

OB

LEM

SO

LVIN

G G

UID

E

Programme overview

PR

OG

RA

MM

E C

HA

RT

Gar

men

t ca

re la

bel

sym

bo

lsD

ryin

g

norm

al /

high

er te

mpe

ratu

re

R

educ

ed te

mpe

ratu

re: s

elec

t G

entle

tum

ble

(for

delic

ate

fabr

ics)

.

D

o no

t tum

ble

dry

Iro

ning

ve

ry h

ot

ho

t

w

arm

D

o no

t iro

n

Tip

s o

n d

ryin

g –A

lway

s ob

serv

e th

e m

axim

um re

com

men

ded

load

s gi

ven

in

the

Pro

gram

me

char

t.

Ove

rload

ing

can

caus

e un

nece

ssar

y w

ear

and

tear

to th

e la

undr

y. It

can

giv

e a

disa

ppoi

ntin

g dr

ying

resu

lt an

d ca

use

mor

e cr

easi

ng.

–D

o no

t loa

d th

e dr

um w

ith it

ems

that

are

stil

l soa

king

wet

. M

ake

sure

you

r la

undr

y is

spu

n at

the

max

imum

spi

n sp

eed

in

the

was

hing

mac

hine

bef

ore

dryi

ng.

–M

inim

um ir

on fa

bric

tend

s to

cre

ase

mor

e, th

e la

rger

the

load

. Th

is is

par

ticul

arly

the

case

for

garm

ents

mad

e fro

m v

ery

fine

wea

ve fa

bric

, suc

h as

shi

rts

or b

lous

es.

Plinth filterClean the plinth filter when Clean the plinth filter. See lights up.

To delete the message: confirm with OK. ĺ Press the round,

indented area on the heat exchan-ger access panel to open it. The panel will spring open.

ĺ Pull the plinth filter out by the handle.

Removing the plinth filter will cause a guide pin in the dryer to come out. This pin ensu-res that the heat exchanger access panel can only be closed if the plinth filter is fitted.

ĺ Pull the handle out of the plinth filter.

ĺ Clean the filter thoroughly under running water.

ĺ Squeeze the water out of the plinth filter thoroughly.

ɑ The plinth filter must not be replaced dripping wet.

ĺ Use a damp cloth to remove any fluff from the access panel.

Refitting the plinth filter ĺ Fit the filter back

on the handle the right way.

ĺ Insert the handle with the plinth fil-ter attached over the two guide pins.

The word Miele on the handle must be the correct way up.

ĺ Close the heat exchanger access panel.

Pro

gram

me

Lo

ad

(wei

ght o

f dry

la

undr

y)

Item

s

Extra dry

Normal plus

Normal

Slightly dry

Hand iron

Hand iron

Machine iron

Extra

s

Co

tto

ns

9 kg

Cot

ton

item

s su

ch a

s th

ose

desc

ribed

und

er C

otto

ns N

orm

al

with

nor

mal

resi

dual

moi

stur

e.X

,

Co

tto

ns9

kgTo

wel

ling,

jers

ey w

ear,

T-sh

irts,

und

erw

ear,

baby

clo

thes

, w

orkw

ear,

cove

rs, j

acke

ts, b

athr

obes

, and

flan

nele

tte b

ed li

nen

War

ning

: Do

not u

se E

xtra

dry

for j

erse

y fa

bric

s (e

.g. T

-shi

rts,

un

derw

ear,

baby

clo

thes

), as

they

hav

e a

tend

ency

to s

hrin

k

XX

XX

XX

X

, ,

,

Min

imum

iro

n4

kgW

orkw

ear,

over

alls

, pul

love

rs, d

ress

es, t

rous

ers,

legg

ings

and

ta

ble

linen

.–

XX

XX

X–

,

, ,

Del

icat

es2.

5 kg

Shi

rts,

blo

uses

, lin

gerie

, app

liqué

d ga

rmen

ts.

–X

XX

XX

–

, ,

Wo

olle

ns h

and

-ca

re2

kgP

ullo

vers

, car

diga

ns, s

ocks

, sto

ckin

gs.

––

––

––

–

Shi

rts

2 kg

Shi

rts

and

blou

ses.

–X

XX

XX

–

, ,

,

Mo

bile

Sta

rt

The

Mie

le@

mob

ile A

pp is

use

d fo

r sel

ectin

g pr

ogra

mm

es a

nd o

pera

ting

the

mac

hine

.

Den

im3

kgJe

ans,

jack

ets,

ski

rts,

shi

rts.

–X

XX

XX

–

, ,

, B

ed li

nen

4 kg

Bed

line

n, p

illow

cas

es.

XX

XX

XX

X

, P

roo

fing

2.5

kgM

icro

fibre

fabr

ic, s

kiw

ear,

oute

rwea

r, fin

e cl

ose

wea

ve c

otto

n ga

rmen

ts (p

oplin

), ta

blec

loth

s.Fi

re h

azar

d! D

o n

ot

use

pro

ofin

g a

gen

ts c

ont

aini

ng

par

affin

.

––

X–

––

–

,

Pre

-iro

ning

1 kg

Cot

ton

trous

ers,

ano

raks

, shi

rts.

––

X–

X–

–

, ,

Was

h2D

ryTh

e pr

ogra

mm

e is

sel

ecte

d au

tom

atic

ally

in c

onju

nctio

n w

ith th

e pr

ogra

mm

e se

lect

ion

on th

e co

nnec

ted

was

hing

mac

hine

.

War

m a

ir8

kgTh

ick

and

mul

ti-la

yere

d ja

cket

s, p

illow

s, s

leep

ing

bags

, bla

nket

s.–

––

––

––

,

, O

uter

wea

r2.

5 kg

Out

erw

ear w

hich

is s

uita

ble

for d

ryin

g in

a tu

mbl

e dr

yer.

––

X–

X–

–

, ,

Exp

ress

4 kg

Gar

men

ts s

uita

ble

for t

he C

otto

ns p

rogr

amm

e.X

XX

XX

XX

,

Sp

ort

swea

r3

kgS

port

swea

r whi

ch is

sui

tabl

e fo

r dry

ing

in a

tum

ble

drye

r.–

XX

XX

X–

,

Aut

om

atic

plu

s5

kgM

ixed

load

s of

gar

men

ts s

uita

ble

for t

he C

otto

ns a

nd M

inim

um

iron

prog

ram

mes

.–

XX

XX

X–

,

Pill

ow

s–

Pillo

ws

(2 s

mal

l 40 

x 80

or 1

larg

e 80

 x 8

0)

––

X–

––

–

, C

oo

l air

8 kg

Any

gar

men

ts w

hich

nee

d to

be

aera

ted.

––

––

––

–

, B

aske

t p

rog

ram

me

3.5

kg

max

. bas

ket

load

Bag

s, s

hoes

, sof

t toy

s, b

eani

es, s

carv

es, g

love

s, s

equi

ned

tops

Onl

y to

be

used

with

dry

ing

bas

ket

(op

tiona

l acc

esso

ry).

––

––

––

–

Silk

s ha

ndca

re1

kgB

lous

es, s

hirt

s–

––

––

––

,

Dry

Fres

h9

kgYo

u ca

n re

duce

or e

limin

ate

unw

ante

d od

ours

in c

lean

, dry

te

xtile

s.U

se th

is p

rogr

amm

e in

con

junc

tion

with

the

Dry

Fres

h fla

con.

––

––

––

–

,

=

Fre

shen

up;

=

Gen

tle tu

mbl

e;

= A

nti-c

reas

e;

= B

uzze

rX

= Ye

s, –

= N

o

Some of the messages in the display are more than one line long. Touch the or sensor to read them in full.

Problem/Fault message Possible cause and remedy

000 lights up after the tumble dryer is switched on and a programme cannot be selected

Access via a code has been activated.You must enter the correct code to use the tumble dryer. See "Settings - Code" in the operating instructions.

After a programme termination: Empty container See

The condensed water container is full or there is a kink in the drain hose. ĺ Empty the condensed water container. ĺ Check the drain hose.

To switch off the message: ĺ Open and close the door while the dryer is switched on.

After the end of the programme:

Clean the plinth filter. See

There is a build-up of fluff. See "Cleaning and care" in the operating instructions. ĺ Clean the fluff filters. ĺ Clean the plinth filter.

To switch off the message: ĺ Confirm with OK.

After a programme termination:

Clean the plinth filter. See

There is a blockage due to fluff. See "Cleaning and care" in the operating instructions. ĺ Clean the fluff filters. ĺ Clean the plinth filter. ĺ Clean the area underneath the air flow openings. ĺ Clean the heat exchanger.

To switch off the message: ĺ Switch the dryer off and back on.

Finish/Cooling down The programme has finished but the laundry has not yet cooled down. ĺ Either remove the laundry and spread it out to cool down or leave it in the tumble dryer to cool down during the cooling phase.

Problem/Fault message Possible cause and remedy

The display is in a dif-ferent language

A different language has been selected in "Settings - Language ". ĺ Set the language you want. The flag symbol serves as a guide.

The display remains dark and the Start/Add laundry sensor does not light up or flash

There is no power to the tumble dryer. ĺ Check whether the mains plug is plugged in and switched on.

ĺ Check whether the circuit breaker has tripped.The tumble dryer has switched off automatically to save energy. ĺ Turn the programme selector to switch the tumble dryer back on again.

The laundry is not suffi-ciently dry

The load consisted of different types of fabric. ĺ Finish drying using the Warm air timed drying programme. ĺ Select a more suitable programme next time.

Tip: You can alter the residual moisture level for some programmes. See "Settings menu - Drying levels" in the operating instructions.

Items made of synthetic fibres are charged with static electricity after drying

Synthetic fibres tend to attract static charge.Static charge can be reduced by adding fabric softener to the final rinse in the washing programme.

There is a build-up of fluff

Fluff is principally the result of friction when garments are being worn and to some extent when they are being washed. Machine drying hardly causes any fluff to form.Fluff is collected by the fluff filters and the plinth filter and can be removed easily.See "Cleaning and care".

There are humming noises

This is not a fault. These noises are normal and caused by the operation of the compressor (heat pump)..