37
LAUNCHXL-F28379D Overview User's Guide Literature Number: SPRUI77 August 2016

User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

LAUNCHXL-F28379D Overview

User's Guide

Literature Number: SPRUI77August 2016

Page 2: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

2 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

Table of Contents

Contents

1 Introduction......................................................................................................................... 52 Kit Contents ........................................................................................................................ 63 Installation .......................................................................................................................... 6

3.1 Code Composer Studio ................................................................................................. 64 Getting Started with the LAUNCHXL-F28379D ......................................................................... 7

4.1 Getting Started ........................................................................................................... 74.2 Demo Application, ADC Sampling ..................................................................................... 74.3 Program and Debug the ADC Sample Demo Application .......................................................... 7

5 Hardware Configuration ........................................................................................................ 85.1 ADC Resolution .......................................................................................................... 85.2 Power Domain ............................................................................................................ 85.3 Boot Mode Selection..................................................................................................... 85.4 Connecting a BoosterPack.............................................................................................. 8

6 LAUNCHXL-F28379D Hardware.............................................................................................. 96.1 Device Pin Out............................................................................................................ 96.2 Schematics .............................................................................................................. 116.3 PCB Layout.............................................................................................................. 216.4 Bill of Materials (BOM) ................................................................................................. 23

7 References ........................................................................................................................ 358 Frequently Asked Questions (FAQ) ...................................................................................... 36

Page 3: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com

3SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

List of Figures

List of Figures1 LAUNCHXL-F28379D Board Overview................................................................................... 62 LAUNCHXL-F28379D_B Block Diagram Schematic .................................................................. 113 LAUNCHXL-F28379D XDS100v2 Schematic .......................................................................... 124 LAUNCHXL-F28379D Power Schematic................................................................................ 135 LAUNCHXL-F28379D ADCIMND0/1/2/3/4/5/ Schematic ............................................................. 146 LAUNCHXL-F28379D PWC_DAC Schematic.......................................................................... 157 LAUNCHXL-F28379D BoosterPack Headers Schematic ............................................................. 168 LAUNCHXL-F28379D PWR Schematic ................................................................................. 179 LAUNCHXL-F28379D_IO1 Schematic .................................................................................. 1810 LAUNCHXL-F28379D_B Schematic..................................................................................... 1911 LAUNCHXL-F28379D Ex_Headers Schematic ........................................................................ 2012 Top Silk ...................................................................................................................... 2113 Top Layer.................................................................................................................... 2114 Top Copper ................................................................................................................. 2115 Inner Copper 1.............................................................................................................. 2116 Inner Copper 2.............................................................................................................. 2117 Inner Copper 3.............................................................................................................. 2118 Inner Copper 4.............................................................................................................. 2119 SMT .......................................................................................................................... 2120 Bottom Silk .................................................................................................................. 2221 Bottom Layer................................................................................................................ 2222 Bottom Copper.............................................................................................................. 22

Page 4: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com

4 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

List of Tables

List of Tables1 F28379D LaunchPad Pin Out and Pin Mux Options - J1, J3 .......................................................... 92 F28379D LaunchPad Pin Out and Pin Mux Options - J4, J2 .......................................................... 93 F28379D LaunchPad Pin Out and Pin Mux Options - J5, J7......................................................... 104 F28379D LaunchPad Pin Out and Pin Mux Options - J8, J6......................................................... 105 LAUNCHXL-F28379D Bill of Materials .................................................................................. 23

Page 5: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

5SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

C2000, Delfino, LaunchPad, Code Composer Studio are trademarks of Texas Instruments.Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.All other trademarks are the property of their respective owners.

User's GuideSPRUI77–August 2016

LAUNCHXL-F28379D Overview

1 IntroductionThe C2000™ Delfino™ LaunchPad™, LAUNCHXL-F28379D, is a complete low-cost development boardfor the Texas Instruments Delfino F2837xD devices. The LAUNCHXL-F28379D kit features all thehardware and software necessary to develop applications based on the F2837xD microcontrollers. TheLaunchPad is based on the superset F28379D device, and easily allows users to migrate to lower featureset and/or lower pin count F2837x devices once the design needs are known. It offers an on-board JTAGemulation tool allowing direct interface to a PC for easy programming, debugging, and evaluation. Inaddition to JTAG emulation, the USB interface provides a UART serial connection from the F28379Ddevice to the host PC.

Users can download an unrestricted copy of the latest version of Code Composer Studio™ IDE version 6to write, download, and debug applications on the LAUNCHXL-F28379D board. The debugger isunobtrusive, allowing the user to run an application at full speed with hardware breakpoints and singlestepping available while consuming no extra hardware resources.

As shown in Figure 1, the LAUNCHXL-F28379D C2000 LaunchPad features include:• USB debugging and programming interface via a high-speed galvanically isolated XDS100v2 emulator

featuring a USB/UART connection• Superset F28379D device• Two user LEDs• Device reset pushbutton• Easily accessible device pins for debugging purposes or as sockets for adding customized extension

boards• Dual 5 V quadrature encoder interfaces• CAN Interface with integrated transceiver• Boot selection switches• Differential Amplifier to provide buffered signals to ADC D for 16-bit mode• Optional SMA connection points P/N:SMA-J-P-H-ST-EM1• 4 Sigma Delta demodulator inputs brought to the BP headers

Page 6: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

{XDS100v2 On-Board Emulator

Enables JTAG debugging/programming

as well as provides serial communication

back to the PC. The XDS100 can also

provide power to the target MCU.

Electrically Isolated PC InterfaceWhen power to the F28379D device is

supplied externally through the BoosterPack

headers, JP1, JP2, and JP3 may be

removed to enable electrical isolation of the

board from the PC.

40-pin BoosterPack

Plug-In Module Connector(J1, J2, J3, and J4){

Dual 5V Quadrature Interfaces(J14 and J15)

CAN Interface w/Transceiver(J12)

CAN Interface w/Transceiver

Power & User LEDs(D1, D9, and D10)

TMS320F28379D

Microcontroller(U14)

{

Reset

Power Jumpers(JP4 and JP5)

Isolated 5V Generation(JP6)

I2C Routing Jumpers(J11 and J13)

40-pin BoosterPack

plug-in module connector(J5, J6, J7, and J8){

Boot Configuration

Switches(S1)

High Density EMIF Connector

(Bottom) (J9)

ADC D Inputs

Opt SMA Connectors

P/N:SMA-J-P-H-ST-EM1

Kit Contents www.ti.com

6 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 1. LAUNCHXL-F28379D Board Overview

2 Kit ContentsThe LAUNCHXL-F28379D LaunchPad experimenter kit includes the following items:• C2000 Delfino LaunchPad Board (LAUNCHXL-F28379D)• Mini USB-B Cable, 0.5m• Quick Start Guide

3 InstallationThe F28379D LaunchPad is supported in Code Composer Studio.

3.1 Code Composer Studio

3.1.1 Download the Required SoftwareCode Composer Studio IDE is available for free without any restriction when used with the XDS100emulator on the C2000 LaunchPad. The software can be downloaded from the C2000 LaunchPad page atti.com/launchpad. At this site, you can also download a copy of controlSUITE that includes drivers,examples, and other support software needed to get started.

3.1.2 Install the SoftwareOnce downloaded, install Code Composer Studio and the controlSUITE package.

3.1.3 Install the HardwareAfter Code Composer Studio is installed, plug the supplied USB cable into the C2000 LaunchPad boardand into an available USB port on your computer.

Windows® will automatically detect the hardware and ask you to install software drivers. Let Windows runa search for the drivers and automatically install them. After Windows successfully installs the drivers forthe integrated XDS100v2 emulator, your LaunchPad is now ready for use.

Page 7: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com Getting Started with the LAUNCHXL-F28379D

7SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

4 Getting Started with the LAUNCHXL-F28379D

4.1 Getting StartedThe first time the LAUNCHXL-F28379D is used, a demo application automatically starts when the board ispowered from a USB host. If your board does not start the demo application, try placing S1 in the followingpositions and resetting the board: UP - UP - DOWN. To start the demo, connect the LAUNCHXL-F28379Dwith the included mini-USB cable to a free USB port. The demo application starts with the LEDs flashingto show the device is active.

4.2 Demo Application, ADC SamplingThe LAUNCHXL-F28379D includes a pre-programmed TMS320F28379D device. When the LaunchPad isconnected via USB, the demo starts with an LED flash sequence. After a few seconds the device switchesinto an ADC sample mode.

Every 1 second the ADC samples pin ADCIN14 and the sampled data is represented as follows: If thesample is above mid-scale (2048), the red LED D9 will light. If the sample is below mid-scale, the blueLED D10 will light.

In addition to the LED display, sample information is also displayed on your PC through the USB/UARTconnection. To view the UART information on your PC, first figure out the COM port associated with theLaunchPad. To do this in Windows, right click on My Computer and click on Properties. In the dialog boxthat appears, click on the Hardware tab and open Device Manager. Look for an entry under Ports (COM &LPT) titled "USB Serial Port (COMX)", where X is a number. Remember this number for when you open aserial terminal. The demo applications UART data was written and debugged using PuTTY, and for thebest user experience we recommend you use PuTTY to view the UART data. PuTTY can be downloadedfrom the following URL:

http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

Open your serial terminal program and open the COM port you found previously in device manager withthe following settings: 115200 Baud, 8 data bits, no parity, 1 stop bit. After opening the serial port in yourserial terminal, reset the Launchpad with the reset push button and observe the serial terminal for asurprise.

4.3 Program and Debug the ADC Sample Demo ApplicationThe project and associated source code for the C2000 Delfino LaunchPad demo is included in thecontrolSUITE software package and should automatically be found by the TI Resource Explorer in CodeComposer Studio v6. In the resource explorer, open the controlSUITE folder and then the DevelopmentTools entry and look for the C2000 LaunchPad line item. Expand this item and LAUNCHXL-F28379D,then select the LaunchPad Demo Application. Follow the steps in the main pane of the resource explorerto import, build, debug, and run this application.

Page 8: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

Hardware Configuration www.ti.com

8 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

5 Hardware ConfigurationThe F28379D LaunchPad provides users with several options on how to configure the board.

5.1 ADC ResolutionThe F28379D had 4 independent 16-bit/12-bit ADCs. The resolution of each ADC is SW selectable.ADCA, ADCB, and ADCC are all brough to the BP headers for use with different booster packs. Most BPwill use the ADC in 12-bit mode which supports Single Ended (SE) inputs. ADC D has been brought to aspecial side connector with ability to drive through a differential amplifier to support 16-bit mode withDifferential Ended (DE) inputs.

5.2 Power DomainThe F28379D LaunchPad has several different power domains to enable JTAG isolation. Jumpers JP1,JP2, JP4, and JP5 configure where power is passed.

Jumper Power DomainJP1 Enable 3.3 V from USB (disables isolation)JP2 Enable GND from USB (disables isolation)JP3 Enable 5 V from USB(disables isolation) ensure JP6 is left open

when this jumper is populatedJP4 Connects target MCU 3.3 V to second set of BoosterPack

headersJP5 Connects target MCU 5 V to second set of BoosterPack headersJP6 Enables 5 V supply from isolated 3.3 V. Only populate this

jumper if JP3 is open.

5.3 Boot Mode SelectionThe LaunchPad's F28379D device includes a boot ROM that performs some basic start-up checks andallows for the device to boot in many different ways. Most users will either want to perform an emulationboot or a boot to flash (if they are running the application standalone). S1 has been provided to allowusers to easily configure the pins that the bootROM checks to make this decision. The switches on S1correspond to:

Switch Function1 GPIO842 GPIO723 TRSTn

Keep in mind that the debugger does not connect if the device is not in the emulation boot mode (TRSTswitch in the up position). More information about boot mode selection can be found in the Boot ROMsection of the TMS320F2837xD Dual-Core Delfino Microcontrollers Technical Reference Manual(SPRUHM8).

5.4 Connecting a BoosterPackThe F2837xD LaunchPad is the perfect experimenter board to start hardware development with theF2837xD devices. All of the connectors are aligned in a 0.1-in (2.54-mm) grid to allow easy andinexpensive development of add on boards called BoosterPacks. These satellite boards can access all ofthe GPIO and analog signals. The the pin out of the connectors can be found in Section 5.

Page 9: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com LAUNCHXL-F28379D Hardware

9SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

6 LAUNCHXL-F28379D Hardware

6.1 Device Pin Out

.Table 1 through Table 4 lists the pin out and pin mux options for the C2000 LaunchPad. Additional muxing options are available and can be foundin the TMS320F2837xD Dual-Core Delfino™ Microcontrollers Data Manual (SPRS880).

(1) For full pin muxing table for functions shown here and additional mux options, see the TMS320F2837xD Dual-Core Delfino™ Microcontrollers Data Manual.

Table 1. F28379D LaunchPad Pin Out and Pin Mux Options - J1, J3

Mux ValueJ1 Pin J3 Pin

Mux ValueX 2 1 0 0 Alt Function 2 X

3.3V 1 21 5VGPIO32 2 22 GND

SCIRXDB GPIO19 3 23 ADCIN14 CMPIN4PSCITXDB GPIO18 4 24 ADCINC3 CMPIN6N

GPIO67 5 25 ADCINB3 CMPIN3NGPIO111 6 26 ADCINA3 CMPIN1N

SPICLKA (1) GPIO60 7 27 ADCINC2 CMPIN6PGPIO22 8 28 ADCINB2 CMPIN3P

SCLA GPIO105 9 29 ADCINA2 CMPIN1PSDAA GPIO104 10 30 ADCINA0 DACOUTA

(1) For full pin muxing table for functions shown here and additional mux options, see the TMS320F2837xD Dual-Core Delfino™ Microcontrollers Data Manual.

Table 2. F28379D LaunchPad Pin Out and Pin Mux Options - J4, J2

Mux ValueJ4 Pin J2 Pin

Mux ValueX 2 1 0 0 1 2 X

EPWM1A GPIO0 40 20 GNDEPWM1B GPIO1 39 19 GPIO61EPWM2A GPIO2 38 18 GPIO123 SD1_C1 (1)

EPWM2B GPIO3 37 17 GPIO122 SD1_D1 (1)

EPWM3A GPIO4 36 16 RSTEPWM3B GPIO5 35 15 GPIO58 SPISIMOA (1)

OUTPUTXBAR1 GPIO24 34 14 GPIO59 SPISOMIA (1)

OUTPUTXBAR7 (

1)GPIO16 33 13 GPIO124 SD1_D2 (1)

DAC1 32 12 GPIO125 SD1_C2 (1)

DAC2 31 11 GPIO29 OUTPUTXBAR6 (

1)

Page 10: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

LAUNCHXL-F28379D Hardware www.ti.com

10 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

(1) For full pin muxing table for functions shown here and additional mux options, see the TMS320F2837xD Dual-Core Delfino™ Microcontrollers Data Manual.

Table 3. F28379D LaunchPad Pin Out and Pin Mux Options - J5, J7

Mux ValueJ5 Pin J7 Pin

Mux ValueX 2 1 0 0 Alt Function 2 X

3.3V 41 61 5VGPIO95 42 62 GND

SCIRXDC (1) GPIO139 43 63 ADCIN15 CMPIN4NSCITXDC (1) GPIO56 44 64 ADCINC5 CMPIN5N

GPIO97 45 65 ADCINB5GPIO94 46 66 ADCINA5 CMPIN2N

SPICLKB GPIO65 47 67 ADCINC4 CMPIN5PGPIO52 48 68 ADCINB4

SCLB (1) GPIO41 49 69 ADCINA4 CMPIN2PSDAB (1) GPIO40 50 70 ADCINA1 DACOUTB

Table 4. F28379D LaunchPad Pin Out and Pin Mux Options - J8, J6

Mux ValueJ8 Pin J6 Pin

Mux ValueX 2 1 0 0 1 2 X

EPWM4A GPIO6 80 60 GNDEPWM4B GPIO7 79 59 GPIO66EPWM5A GPIO8 78 58 GPIO131 SD2_C1*EPWM5B GPIO9 77 57 GPIO130 SD2_D1*EPWM6A GPIO10 76 56 RSTEPWM6B GPIO11 75 55 GPIO63 SPISIMOB*

OUTPUTXBAR3 GPIO14 74 54 GPIO64 SPISOMIB*OUTPUTXBAR4 GPIO15 73 53 GPIO26 SD2_D2*

DAC3 72 52 GPIO27 SD2_C2*DAC4 71 51 GPIO25 OUTPUTXBAR2*

Page 11: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

BLOCK DIAGRAM

Sheet 2

Sheet 3

Sheet 7

Sheet 2

Sheet 10

Sheet 6

Sheet 6

Sheet 10Sheet 5

Sheet 7

1.1

Roy

MCU002

REV DATA NOTE

REV1.0 20151210 ORIGINAL RELEASED

REV1.1 20160415-Changed value for R11/R52 from 560m to 100m.-Swap pin connection for J3&J7-Replace U19&U11 with OPA350-Changed value for R38/R39 from 330R to 820R.

20160728 -Modified infomation of the Title

Power management

Micro USB type B

FT2232H

TMS320F28379D-NFBGA

BoosterPack 1 Connector

LEDSCAN

SERIAL 1&2

BoosterPack 2 Connector

QEP Connector

DF40C-60DP-0.4V

A

B

C

D

E

A

B

C

D

E

1 2 3 4 5 6

Note: DNP = Do Not Populate

www.ti.com LAUNCHXL-F28379D Hardware

11SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

6.2 SchematicsFigure 2 shows the F28379D LaunchPad schematic.

Figure 2. LAUNCHXL-F28379D_B Block Diagram Schematic

Page 12: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

XDS100v2

1.1

Roy

MCU002

2.2k

3.3u

0.1u

0.1u0.1u0.1u

12k

1K

AGND

AGND

AGND

AGND

AGND

AGNDGND

GND

1K

AGND

Blue

Red

820

820

12M

36p 36p

+3V30

0

0

0

0

0

0

0

0

+3V3

AGNDAGNDAGNDAGND

4.7u

4.7u

60

0o

hm

60

0o

hm

AGND AGND

500mA

0R0R

AGND

0.1u

AGNDAGNDAGND

Green

820

AGND

100K

10uF

22uF

2.2uH

AG

ND

10K

+5

V

AGNDAGNDAGNDAGNDAGNDAGND AGND

+3V3

R31

C15

C16

VCC

GND

62

CLK4

DO1

DI3

CS5

U8

VREGINP$50

USBDMP$7

USBDPP$8

REFP$6

RESET#P$14

OSCIP$2

OSCOP$3

EECSP$63

EECLKP$62

EEDATAP$61

TESTP$13

AG

ND

P$10

GN

D1

P$1

GN

D2

P$5

GN

D3

P$11

GN

D4

P$15

PWREN#P$60

SUSPEND#P$36

BCBUS3P$54

BCBUS2P$53

BCBUS1P$52

BCBUS0P$48

BDBUS7P$46

BDBUS6P$45

BDBUS5P$44

BDBUS4P$43

BDBUS3P$41

BDBUS2P$40

BDBUS1P$39

BDBUS0P$38

ACBUS3P$29

ACBUS2P$28

ACBUS1P$27

ACBUS0P$26

ADBUS7P$24

ADBUS6P$23

ADBUS5P$22

ADBUS4P$21

ADBUS3P$19

ADBUS2P$18

ADBUS1P$17

ADBUS0P$16

VC

CIO

1P

$20

VC

OR

E2

P$37

VC

OR

E1

P$12

VP

HY

P$4

ACBUS4P$30

ACBUS5P$32

ACBUS6P$33

ACBUS7P$34

BCBUS4P$55

BCBUS5P$57

BCBUS6P$58

BCBUS7P$59

GN

D5

P$25

GN

D6

P$35

GN

D7

P$47

GN

D8

P$51

VREGOUTP$49

VP

LL

P$9

VC

OR

E3

P$64

VC

CIO

2P

$31

VC

CIO

3P

$42

VC

CIO

4P

$56

TH

TH

U6

C14C13C12

R24

R22

VCC11

VCC216

GND12

GND18

GND215

GND29

INA3

INB4

OUTC5

NC16

EN17

EN210

OUTA14

OUTB13

INC12

NC211

U7

VCC11

VCC216

GND12

GND18

GND215

GND29

INA3

INB4

INC5

IND6

NC7

EN10

OUTA14

OUTB13

OUTC12

OUTD11

U5

R23

D7

D8

R26

R27

Q3

C17 C18

R21

R20

R19

R18

R16

R28

R30

R32

R25

1 2

JP1

1 2 JP2

C10

C11

L2

L1

F1

R15R33

TP11

TP12

TP13

TP14 TP15 TP16 TP17

C43

D4

R46

TP30

ENP$3

EX

_P

AD

P$9

FBP$5

GNDP$4

PGP$8

PGNDP$1

SWP$7

VINP$2

VOSP$6

U17

R47

C44C45

L7

R12

1 2

JP

3

12345

D-

D-

D+

D+

USBVCC

USBVCC

USBVCC

TCKTDI

TDO

TMS

FTDI_CS

FTDI_CSFTDI_CLK

FTDI_CLK

FTDI_DATA

FTDI_DATAFTDI_DATA

FTDI_1V8

FTDI_1V8

PWREN#SUSPEND#

FTDI_3V3FTDI_3V3

FTDI_3V3

FTDI_3V3

FTDI_3V3

FTDI_3V3

FTDI_3V3 FTDI_3V3

FTDI_3V3

JTAG_TRSTGPIO42/SCIATX(<-MCU)

GPIO43/SCIARX(->MCU)

Arr

ay

EE

PR

OM

A

B

C

D

E

A

B

C

D

E

1 2 3 4 5 6

Mini USB

LAUNCHXL-F28379D Hardware www.ti.com

12 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 3. LAUNCHXL-F28379D XDS100v2 Schematic

Page 13: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

F28379D Power

1.1

Roy

MCU002

2.2u 2.2u 2.2u 2.2u 2.2u 2.2u 2.2u 2.2u 2.2u

GND GND GND GND GND

+3V3

10u

GND GND

178k

64.9k39.2k

22uGND

GND

220Ohm

10u

GND

0.1u

0.1u

0.1u

0.1u

0.1u

0.1u

0.1u

0.1u

0.1u

0.1u

0.1u

0.1u

GNDGNDGNDGNDGNDGND

220Ohm

10u 10u

+3V3

GNDGNDGND

60Ohm

2.2u2.2u

+3V3

GNDGND

0.1u 0.1u

GND

60Ohm

2.2u2.2u

+3V3

GNDGND

0.1u 0.1u

GND

0.1u2.2u

GNDGNDGND

0.1u

GND

1k

1u1u

GNDGND

0.1u

GND

1u

GND

100m

GND

GND

100m

820p10K

3.3uH

10uF

30.1K

10K

4.7u

+3V3

GNDGND

+5V

1uH

1u

GND

+5

V

+5V

GND

GND

+5V22uF

22uF

10u

+3V3

C42 C46 C47 C48 C49 C75 C76 C77 C78

ENP$1

FBP$4

GNDP$2*2

MODEP$3

PGP$6

SWP$7

VINP$8

VOSP$5

U4

C79

R53

R54R55

C80

L11

C81

C56

C57

C58

C59

C60

C61

C62

C63

C64

C65

C66

C67

L5

C68 C69

L3

C27C29 C28 C30

L4

C71C72C73 C74

C1C2

C5

R3

C6C7

C9

C19

R11

R52

C25

FB3G

ND

2

SD4

SWITCH1

VIN5

U12

R14

L6

D3

C41

R17

R45

C8

L8

C22

C23

C38

1 2

JP6

+INP$3

-INP$2

NC1P$1

NC2P$5

NC3P$8

OUTP$6

V+P$7

V-P$4

U11

+INP$3

-INP$2

NC1P$1

NC2P$5

NC3P$8

OUTP$6

V+P$7

V-P$4

U19

DNC1P$1

DNC2P$8

GNDP$4

NCP$7

TEMPP$3

TRIM/NRP$5

VINP$2

VOUTP$6

U13

C70

VDD+1V2

VDDIO

VDDAVDDOSC

+5V

VREFHIA

VREFHIB

A

B

C

D

E

A

B

C

D

E

1 2 3 4 5 6

www.ti.com LAUNCHXL-F28379D Hardware

13SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 4. LAUNCHXL-F28379D Power Schematic

Page 14: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

ADCIND0/1/2/3/4/5

DNP

DNP

1.1

Roy

MCU002

GND

2K 2K 12R

49.9R

4K

4K

49.9R

2K 2K 12R

100P

1UF

1NF

100P

GND GND

GND

+3V3

GND

GND

+3V3

0.22UF

GND

J21 =

GND

GND

GNDTP21 TP22

TP23TP24

R56 R57 R58

R59

R60

R61

R62

R63 R64 R65

C20

C21

C40

C82

C83

J21-1 J21-2J21-3 J21-4J21-5 J21-6J21-7 J21-8

PD

P$7

VIN

+P

$8

VIN

-P

$1

VO

CM

P$2

VO

UT

+P

$4

VO

UT-

P$5

VS

+P

$3

VS

-P

$6

U1

J19

J20

ADCIND5

ADCIND4

ADCIND0ADCIND1ADCIND2ADCIND3

A

B

C

D

E

A

B

C

D

E

1 2 3 4 5 6

LAUNCHXL-F28379D Hardware www.ti.com

14 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 5. LAUNCHXL-F28379D ADCIMND0/1/2/3/4/5/ Schematic

Page 15: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

PWM_DAC

PWM_DAC

1.1

Roy

MCU002

Red Blue

820 820

+3V3 +3V3 +3V3

GND

1K

1K

1K

1K

0.1u0.1u0.1u 0.1u

GND GND GND GND

0.1u

GNDD9 D10

1A1

2A3

2Y4

1Y6

VC

C5

GN

D2

U9 R38 R39R36

R37

R40

R41

C33C34C35 C36

C24

GPIO34

PWM/BASED/DAC1

PWM/BASED/DAC2

PWM/BASED/DAC3

PWM/BASED/DAC4

GPIO157

GPIO158

GPIO31

GPIO159

GPIO160

A

B

C

D

E

A

B

C

D

E

1 2 3 4 5 6

www.ti.com LAUNCHXL-F28379D Hardware

15SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 6. LAUNCHXL-F28379D PWC_DAC Schematic

Page 16: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

BoosterPack Headers

BoosterPack Headers

1.1

Roy

MCU002

+3V3

GND

GND

+5V

GND

GND

+3V3 +5V

1 2

JP4

1 2

JP5

11

22

33

44

55

66

77

88

99

1010

1111

1212

1313

1414

1515

1616

1717

1818

1919

2020

2121

2222

2323

2424

2525

2626

2727

2828

2929

3030

3131

3232

3333

3434

3535

3636

3737

3838

3939

4040

411

422

433

444

455

466

477

488

499

5010

5111

5212

5313

5414

5515

5616

5717

5818

5919

6020

7131

7232

7333

7434

7535

7636

7737

7838

7939

8040

6121

6222

6323

6424

6525

6626

6727

6828

6929

7030

RESET#

RESET#

GPIO61/SPIACS

GPIO5/PWMOUT3B

GPIO2//PWMOUT2AGPIO3/PWMOUT2B

GPIO32ADCINC3/ANALOGIN

ADCINA3/ANALOGINADCINB3/ANALOGIN

ADCIN15/ANALOGIN

GPIO64/SPIBMISO

GPIO139/SCICRX(->MCU)

GPIO125/SD1CLK2PWM/BASED/DAC1PWM/BASED/DAC2

PWM/BASED/DAC4

ADCIN14/ANALOGIN

GPIO60/SPICLKA

GPIO26/SD2D2GPIO27/SD2CLK2

GPIO4/PWMOUT3A

GPIO65/SPIBCLK

ADCINA2/ANALOGIN

GPIO67

GPIO29/OPXBAR6

GPIO105/I2CSCLAGPIO104/I2CSDAA

GPIO124/SD1D2

GPIO122/SD1D1GPIO123/SD1CLK1

ADCINA0/ANALOGIN(DACA)

GPIO24/OPXBAR1

GPIO1/PWMOUT1BGPIO0/PWMOUT1A

GPIO16/OPXBAR7

ADCINB2/ANALOGIN

GPIO95

GPIO56/SCICIX(<-MCU)GPIO97GPIO94

GPIO52

GPIO25/OPXBAR2

GPIO63/SPIBMOSI

GPIO66/SPIBCS

ADCINB4/ANALOGINADCINC4/ANALOGIN

ADCINB5/ANALOGINADCINC5/ANALOGIN

ADCINA1/ANALOGIN(DACB)

GPIO15/OPXBAR4

GPIO7/PWMOUT4BGPIO6/PWMOUT4A

GPIO22

GPIO111

PWM/BASED/DAC3

ADCINA4/ANALOGIN

ADCINA5/ANALOGIN

ADCINC2/ANALOGIN

GPIO8/PWMOUT5AGPIO9/PWMOUT5B

GPIO58/SPIAMOSIGPIO59/SPIAMISO

GPIO11/PWMOUT6BGPIO10/PWMOUT6A

GPIO14/OPXBAR3

GPIO130/SD2D1GPIO131/SD2CLK1

GPIO40/I2CSDAB/J5GPIO41/I2CSCLB/J5

GPIO18GPIO19

A

B

C

D

E

A

B

C

D

E

1 2 3 4 5 6

LAUNCHXL-F28379D Hardware www.ti.com

16 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 7. LAUNCHXL-F28379D BoosterPack Headers Schematic

Page 17: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

RESET

GPIO72 GPIO84TRST

10 00

000

x x

011

1

10

Emulation BootParallel I/OSCIWaitGetMode

BOOT

F28379D-PWR

1.1

Roy

MCU002

GND

GND

+3V3

GND

10MHz

36p

36p

1M

2.2k

GND

Green

820

+3V3

GND

+3V3

0.1u

GND

2.2k2.2k

820820

+3V3+3V3

GNDGND

204-3ST

2.2k

GND

GND

0R

GNDERRORSTS

U19

FLT1W12

FLT2V13

NCH4

VDDIO25B1

VDDIO26F13

VDDIO27F16

VDDIO28L14

VDDOSC1H16

VDDOSC2H17

VSS1A1

VSS2A10

VSS3A19

VSS4E5

VSS5E6

VSS6E8

VSS7E12

VSS8E14

VSS9E15

VSS10F5

VSS11F6

VSS12F8

VSS13F12

VSS14F14

VSS15F15

VSS16G16

VSS17G17

VSS18H8

VSS19H9

VSS20H10

VSS21H11

VSS22H12

VSS23H14

VSS24H15

VSS25J5

VSS26J6

VSS27J8

VSS28J9

VSS29J10

VSS30J11

VSS31J12

VSS32K8

VSS33K9

VSS34K10

VSS35K11

VSS36K12

VSS37K14

VSS38K15

VSS39L5

VSS40L6

VSS41L8

VSS42L9

VSS43L10

VSS44L11

VSS45L12

VSS46L18

VSS47M8

VSS48M9

VSS49M10

VSS50M11

VSS51M12

VSS52M14

VSS53M15

VSS54N1

VSS55N5

VSS56N6

VSS57P8

VSS58P11

VSS59P12

VSS60P14

VSS61P15

VSS62R7

VSS63R8

VSS64R14

VSS65R15

VSS66W1

VSS67W7

VSS68W19

VSSA1P1

VSSA2P5

VSSA3R5

VSSA4V7

VSSA5P7

VSSOSC1H18

VSSOSC2H19

U14G$1

TCKV15

TDIW13

TDOW15

TMSW14

TRSTV14

VDD1E9

VDD2F9

VDD3K5

VDD3VFL1R11

VDD3VFL2R12

VDD4E11

VDD5F11

VDD6G14

VDD7G15

VDD8J14

VDD9J15

VDD10K6

VDD11R10

VDD12R13

VDD13P10

VDD14P13

VDDA1R6

VDDA2P6

VDDIO1A9

VDDIO2A18

VDDIO3E7

VDDIO4E10

VDDIO5E13

VDDIO6E16

VDDIO7F4

VDDIO8F7

VDDIO9F10

VDDIO10G4

VDDIO11G5

VDDIO12G6

VDDIO13H5

VDDIO14H6

VDDIO15L15

VDDIO16M1

VDDIO17M5

VDDIO18M6

VDDIO19N14

VDDIO20N15

VDDIO21P9

VDDIO22R9

VDDIO23V19

VDDIO24W8

VREFHIAV1

VREFHIBW5

VREFHICR1

VREFHIDV5

VREFLOAR2

VREFLOBV6

VREFLOCP2

VREFLODW6

VREGENZJ18

X1G19

X2J19

XRSF19

U14G$2

Q1

C4

C3

R7

R6

D1

R1

TP1

C39

1 2

S3

R8R9

R4R5

456 1

23

S1

R10

R66GNDGNDGNDGND

VDDOSC

VDDA

VSSOSC

VSSOSC

VSSOSC

VREFHIB

VREFHIB

VREFHIA

VREFHIA

RESET#

RESET#

X1

X1

X2

X2

TCKTDITDOTMSTRST

TRST

NC

FLT2FLT1

ERRORSTS

VDD

VDDIO

VDDIO

VDDIO

JTAG_TRSTGPIO72GPIO841

23

ON

A

B

C

D

E

A

B

C

D

E

1 2 3 4 5 6

www.ti.com LAUNCHXL-F28379D Hardware

17SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 8. LAUNCHXL-F28379D PWR Schematic

Page 18: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

TMS320F28379D-IO1

1.1

Roy

MCU002

GPIO52/EQEP1S/EM1A12/SPICLKC/SD1_D1P16

GPIO53/EQEP1I/EM1D31/EM2D15/SPISTEC/SD1_C1P17

GPIO54/SPISIMOA/EM1D30/EM2D14/EQEP2A/SCITXDB/SD1_D1P18

GPIO55/SPISOMIA/EM1D29/EM2D13/EQEP2B/SCIRXDB/SD1_C1P19

GPIO56/SPICLKA/EM1D28/EM2D12/EQEP2S/SCITXDC/SD2_D2N16

GPIO57/SPISTEA/EM1D27/EM2D11/EQEP2I/SCIRXDC/SD2_C2N18

GPIO58/MCLKRA/EM1D26/EM2D10/OUTPUTXBAR1/SPICLKB/SD2_D2/SPISIMOA1N17

GPIO59/MFSRA/EM1D25/EM2D9/OUTPUTXBAR2/SPISTEB/SD2_C2/SPISOMIA1M16

GPIO60/MCLKRB/EM1D24/EM2D8/OUTPUTXBAR3/SPISIMOB/SD2_D3/SPICLKA1M17

GPIO61/MFSRB/EM1D23/EM2D7/SPISOMIB/SD2_C3/SPISTEA1L16

GPIO62/SCIRXDC/EM1D22/EM2D6/EQEP3A/CANRXA/SD2_D1J17

GPIO63/SCITXDC/EM1D21/EM2D5/EQEP3B/CANTXA/SD2_C4/SPISIMOB1J16

GPIO64/EM1D20/EM2D4/EQEP3S/SCIRXDA/SPISOMIB1L17

GPIO65/EM1D19/EM2D3/EQEP3I/SCITXDA/SPICLKB1K16

GPIO66/EM1D18/EM2D2/SDAB/SPISTEB1K17

GPIO67/EM1D17/EM2D2B19

GPIO68/EM1D16/EM2D1C18

GPIO69/EM1D15/SCLB/SPISIMOC1B18

GPIO70/EM1D14/CANRXA/SCITXDB/SPISOMIC1A17

GPIO71/EM1D13/CANTXA/SCIRXDB/SPICLKC1B17

GPIO72/EM1D12/CANTXB/SCITXDC/SPISTEC1B16

GPIO73/EM1D11/XCLKOUT/CANRXB/SCIRXDC1A16

GPIO74/EM1D1C17

GPIO75/EM1D1D16

GPIO76/EM1D8/SCITXDD1C16

GPIO77/EM1D7/SCIRXDD1A15

GPIO78/EM1D6/EQEP2A1B15

GPIO79/EM1D5/EQEP2B1C15

GPIO80/EM1D4/EQEP2S1D15

GPIO81/EM1D3/EQEP2I1A14

GPIO82/EM1D1B14

GPIO83/EM1D2C14

GPIO84/SCITXDA/MDXB/MDXA1A11

GPIO85/EM1D0/SCIRXDA/MDRB/MDRA1B11

GPIO86/EM1A13/EM1CAS/SCITXDB/MCLKXB/MCLKXA1C11

GPIO87/EM1A14/EM1RAS/SCIRXDB/MFSXB/MFSXA1D11

GPIO88/EM1A15/EM1DQM1C6

GPIO89/EM1A16/EM1DQM1/SCITXDC1D6

GPIO90/EM1A17/EM1DQM2/SCIRXDC1A5

GPIO91/EM1A18/EM1DQM3/SDAA1B5

GPIO92/EM1A19/EM1BA1/SCLA1A4

GPIO93/EM1BA0/SCITXDD1B4

GPIO94/SCIRXDD1A3

GPIO96/EM2DQM1/EQEP1A1C3

GPIO97/EM2DQM0/EQEP1B1A2

GPIO98/EM2A0/EQEP1S1F1

GPIO99/EM2A1/EQEP1I1G1

GPIO100/EM2A2/EQEP2A/SPISIMOC1H1

GPIO101/EM2A3/EQEP2B/SPISOMIC1H2

GPIO102/EM2A4/EQEP2S/SPICLKC1H3

GPIO103/EM2A5/EQEP2I/SPISTEC1J1

GPIO104/SDAA/EM2A6/EQEP3A/SCITXDD1J2

GPIO105/SCLA/EM2A7/EQEP3B/SCIRXDD1J3

GPIO106/EM2A8/EQEP3S/SCITXDC1L2

GPIO107/EM2A9/EQEP3I/SCIRXDC1L3

GPIO108/EM2A1L4

GPIO109/EM2A1N2

GPIO110/EM2WAIT1M2

GPIO111/EM2BA1M4

GPIO112/EM2BA2M3

GPIO113/EM2CAS1N4

GPIO114/EM2RAS1N3

GPIO115/EM2CS1V12

GPIO116/EM2CS1W10

GPIO117/EM2SDCKE1U12

GPIO118/EM2CLK1T12

GPIO119/EM2RNW1T15

GPIO120/EM2WE/USB0PFLT1U15

GPIO121/EM2OE/USB0EPEN1W16

GPIO122/SPISIMOC/SD1_D2T8

GPIO123/SPISOMIC/SD1_C2U8

GPIO124/SPICLKC/SD1_D1V8

GPIO125/SPISTEC/SD1_C1T9

GPIO126/SD1_D1U9

GPIO127/SD1_C1V9

GPIO128/SD1_D1W9

GPIO129/SD1_C1T10

GPIO130/SD2_D2U10

GPIO131/SD2_C2V10

GPIO132/SD2_D1W18

GPIO133/AUXCLKIN/SD2_C1G18

GPIO134/SD2_D1V18

GPIO135/SCITXDA/SD2_C1U18

GPIO95B3

U14G$3

GPIO136/SCIRXDA/SD2_D4T17

GPIO137/SCITXDB/SD2_C4T18

GPIO138/SCIRXDBT19

GPIO139/SCIRXDCN19

GPIO140/SCITXDCM19

GPIO141/SCIRXDDM18

GPIO142/SCITXDDL19

GPIO143F18

GPIO144F17

GPIO145/EPWM1AE17

GPIO146/EPWM1BD18

GPIO147/EPWM2AD17

GPIO148/EPWM2BD14

GPIO149/EPWM3AA13

GPIO150/EPWM3BB13

GPIO151/EPWM4AC13

GPIO152/EPWM4BD13

GPIO153/EPWM5AA12

GPIO154/EPWM5BB12

GPIO155/EPWM6AC12

GPIO156/EPWM6BD12

GPIO157/EPWM7AB10

GPIO158/EPWM7BC10

GPIO159/EPWM8AD10

GPIO160/EPWM8BB9

GPIO161/EPWM9AC9

GPIO162/EPWM9BD9

GPIO163/EPWM10AA8

GPIO164/EPWM10BB8

GPIO165/EPWM11AC5

GPIO166/EPWM11BD5

GPIO167/EPWM12AC4

GPIO168/EPWM12BD4

U14G$5

GPIO93GPIO92

GPIO52GPIO53GPIO54GPIO55GPIO56/SCICIX(<-MCU)GPIO57

GPIO60/SPICLKAGPIO61/SPIACSGPIO62GPIO63/SPIBMOSIGPIO64/SPIBMISOGPIO65/SPIBCLKGPIO66/SPIBCSGPIO67GPIO68GPIO69GPIO70GPIO71GPIO72GPIO73GPIO74GPIO75GPIO76GPIO77GPIO78GPIO79GPIO80GPIO81GPIO82GPIO83

GPIO85GPIO86GPIO87GPIO88GPIO89GPIO90GPIO91

GPIO94GPIO95GPIO96GPIO97GPIO98GPIO99

GPIO100GPIO101GPIO102GPIO103

GPIO104/I2CSDAAGPIO105/I2CSCLA

GPIO106GPIO107GPIO108GPIO109GPIO110GPIO111GPIO112GPIO113GPIO114GPIO115GPIO116GPIO117GPIO118GPIO119GPIO120GPIO121

GPIO122/SD1D1GPIO123/SD1CLK1

GPIO124/SD1D2GPIO125/SD1CLK2

GPIO126GPIO127GPIO128GPIO129

GPIO130/SD2D1GPIO131/SD2CLK1

GPIO132GPIO133GPIO134GPIO135

GPIO84

GPIO58/SPIAMOSIGPIO59/SPIAMISO

GPIO136GPIO137GPIO138

GPIO139/SCICRX(->MCU)GPIO140GPIO141GPIO142GPIO143GPIO144GPIO145

GPIO147GPIO148GPIO149GPIO150GPIO151

GPIO153GPIO154GPIO155GPIO156GPIO157GPIO158GPIO159GPIO160

GPIO162GPIO163GPIO164GPIO165GPIO166GPIO167GPIO168

GPIO161

GPIO146

GPIO152

A

B

C

D

E

A

B

C

D

E

1 2 3 4 5 6

LAUNCHXL-F28379D Hardware www.ti.com

18 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 9. LAUNCHXL-F28379D_IO1 Schematic

Page 19: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

TMS320F28379D-IO2

1.1

Roy

MCU002

+3V3

+3V3

GND

ADCIN14/CMPIN4PT4

ADCIN15/CMPIN4NU4

ADCINA0/DACOUTAU1

ADCINA1/DACOUTBT1

ADCINA2/CMPIN1PU2

ADCINA3/CMPIN1NT2

ADCINA4/CMPIN2PU3

ADCINA5/CMPIN2NT3

ADCINB0/VDACV2

ADCINB1/DACOUTCW2

ADCINB2/CMPIN3PV3

ADCINB3/CMPIN3NW3

ADCINB4V4

ADCINB5W4

ADCINC2/CMPIN6PR3

ADCINC3/CMPIN6NP3

ADCINC4/CMPIN5PR4

ADCINC5/CMPIN5NP4

ADCIND0/CMPIN7PT5

ADCIND1/CMPIN7NU5

ADCIND2/CMPIN8PT6

ADCIND3/CMPIN8NU6

ADCIND4T7

ADCIND5U7

GPIO0/EPWM1A/SDAAC8

GPIO1/EPWM1B/MFSRB/SCLAD8

GPIO2/EPWM2A/OUTPUTXBAR1/SDABA7

GPIO3/EPWM2B/OUTPUTXBAR2/MCLKRB/OUTPUTXBAR2/SCLBB7

GPIO4/EPWM3A/OUTPUTXBAR3/CANTXAC7

GPIO5/EPWM3B/MFSRA/OUTPUTXBAR3/CANRXAD7

GPIO6/EPWM4A/OUTPUTXBAR4/EXTSYNCOUT/EQEP3A/CANTXBA6

GPIO7/EPWM4B/MCLKRA/OUTPUTXBAR5/EQEP3B/CANRXBB6

GPIO8/EPWM5A/CANTXB/ADCSOCAO/EQEP3S/SCITXDAG2

GPIO9/EPWM5B/SCITXDB/OUTPUTXBAR6/EQEP3I/SCIRXDAG3

GPIO10/EPWM6A/CANRXB/ADCSOCBO/EQEP1A/SCITXDB/UPP-WAITB2

GPIO11/EPWM6B/SCIRXDB/OUTPUTXBAR7/EQEP1B/UPP-STARTC1

GPIO12/EPWM7A/CANTXB/MDXB/EQEP1S/SCITXDC/UPP-ENAC2

GPIO13/EPWM7B/CANRXB/MDRB/EQEP1I/SCIRXDC/UPP-D7D1

GPIO14/EPWM8A/SCITXDB/MCLKXB/OUTPUTXBAR3/UPP-D6D2

GPIO15/EPWM8B/SCIRXDB/MFSXB/OUTPUTXBAR4/UPP-D5D3

GPIO16/SPISIMOA/CANTXB/OUTPUTXBAR7/EPWM9A/SD1_D1/UPP-D4E1

GPIO17/SPISOMIA/CANRXB/OUTPUTXBAR8/EPWM9B/SD1_C1/UPP-D3E2

GPIO18/SPICLKA/SCITXDB/CANRXA/EPWM10A/SD1_D2/UPP-D2E3

GPIO19/SPISTEA/SCIRXDB/CANTXA/EPWM10B/SD1_C2/UPP-D1E4

GPIO20/EQEP1A/MDXA/CANTXB/EPWM11A/SD1_D3/UPP-D0F2

GPIO21/EQEP1B/MDRA/CANRXB/EPWM11B/SD1_C3/UPP-CLKF3

GPIO22/EQEP1S/MCLKXA/SCITXDB/EPWM12A/SPICLKB/SD1_D4J4

GPIO23/EQEP1I/MFSXA/SCIRXDB/EPWM12B/SPISTEB/SD1_C4K4

GPIO24/OUTPUTXBAR1/EQEP2A/MDXB/SPISIMOB/SD2_D1K3

GPIO25/OUTPUTXBAR2/EQEP2B/MDRB/SPISOMIB/SD2_C1K2

GPIO26/OUTPUTXBAR3/EQEP2I/MCLKXB/OUTPUTXBAR3/SPICLKB/SD2_D2K1

GPIO27/OUTPUTXBAR4/EQEP2S/MFSXB/OUTPUTXBAR4/SPISTEB/SD2_C2L1

GPIO28/SCIRXDA/EM1CS4/OUTPUTXBAR5/EQEP3A/SD2_D3V11

GPIO29/SCITXDA/EM1SDCKE/OUTPUTXBAR6/EQEP3B/SD2_C3W11

GPIO30/CANRXA/EM1CLK/OUTPUTXBAR7/EQEP3S/SD2_D4T11

GPIO31/CANTXA/EM1WE/OUTPUTXBAR8/EQEP3I/SD2_C4U11

GPIO32/SDAA/EM1CS0U13

GPIO33/SCLA/EM1RNWT13

GPIO34/OUTPUTXBAR1/EM1CS2/SDABU14

GPIO35/SCIRXDA/EM1CS3/SCLBT14

GPIO36/SCITXDA/EM1WAIT/CANRXAV16

GPIO37/OUTPUTXBAR2/EM1OE/CANTXAU16

GPIO38/EM1A0/SCITXDC/CANTXBT16

GPIO39/EM1A1/SCIRXDC/CANRXBW17

GPIO40/EM1A2/SDABV17

GPIO41/EM1A3/SCLBU17

GPIO42/SDAA/SCITXDA/USB0DMD19

GPIO43/SCLA/SCIRXDA/USB0DPC19

GPIO44/EM1A4K18

GPIO45/EM1A5K19

GPIO46/EM1A6/SCIRXDDE19

GPIO47/EM1A7/SCITXDDE18

GPIO48/OUTPUTXBAR3/EM1A8/SCITXDA/SD1_D1R16

GPIO49/OUTPUTXBAR4/EM1A9/SCIRXDA/SD1_C1R17

GPIO50/EQEP1A/EM1A10/SPISIMOC/SD1_D2R18

GPIO51/EQEP1B/EM1A11/SPISOMIC/SD1_C2R19

U14G$4

123

J11

123

J13

A02

A13

A24

A35

A46

A57

A68

A79

A811

A912

A1013

A1114

A1215

A1316

A1417

A1518

BUSY50

CSN43

D021

D122

D223

D324

D425

D526

D6/SPI_INT27

D728

D834

D935

D1036

D1137

D1238

D1339

D1440

D1541

E2PROM_LOAD20

EMIF_INT49

ETRESETN60

GND11

GND210

GND319

GND429

GND542

GND651

I2C-SCL54

I2C-SDA55

NRD44

NWR45

RSVD146

RSVD258

RSVD359

SPI_CLK31

SPI_SEL30

SPI_SIMOC32

SPI_SOMIC33

SYNC/LATCH047

SYNC/LATCH148

VCC33A52

VCC33B53

VCC33C56

VCC33D57

J9

GPIO93GPIO92

GPIO69GPIO70GPIO71GPIO72GPIO73GPIO74GPIO75GPIO76

GPIO77GPIO78GPIO79GPIO80GPIO81GPIO82GPIO83GPIO85

GPIO86 GPIO87

GPIO88 GPIO89

GPIO100GPIO101GPIO102

GPIO103

GPIO106

GPIO107

GPIO108

GPIO109GPIO117

GPIO51

GPIO51

GPIO50

GPIO50

GPIO49

GPIO49

GPIO48

GPIO48

GPIO46

GPIO46

GPIO45

GPIO45

GPIO44

GPIO44

GPIO41/I2CSCLB

GPIO41/I2CSCLB

GPIO40/I2CSDAB

GPIO40/I2CSDAB

GPIO39

GPIO39

GPIO38

GPIO38

GPIO37

GPIO37

GPIO36

GPIO36

GPIO33

GPIO33

GPIO32

GPIO32

GPIO31

GPIO31

GPIO30

GPIO30

GPIO34

GPIO34

GPIO47

GPIO47

+3V3

+3V3

GPIO43/SCIARX(->MCU)GPIO42/SCIATX(<-MCU)

GPIO35

GPIO29/OPXBAR6GPIO28GPIO27/SD2CLK2

GPIO14/OPXBAR3

GPIO25/OPXBAR2GPIO24/OPXBAR1GPIO23GPIO22GPIO21GPIO20GPIO19GPIO18

GPIO16/OPXBAR7GPIO15/OPXBAR4

GPIO13

GPIO12

GPIO7/PWMOUT4BGPIO6/PWMOUT4AGPIO5/PWMOUT3BGPIO4/PWMOUT3AGPIO3/PWMOUT2B

GPIO2//PWMOUT2AGPIO1/PWMOUT1BGPIO0/PWMOUT1A

ADCIND5ADCIND4ADCIND3ADCIND2ADCIND1ADCIND0

ADCINC5/ANALOGINADCINC4/ANALOGINADCINC3/ANALOGINADCINC2/ANALOGINADCINB5/ANALOGINADCINB4/ANALOGINADCINB3/ANALOGINADCINB2/ANALOGIN

ADCINB0ADCINA5/ANALOGINADCINA4/ANALOGINADCINA3/ANALOGINADCINA2/ANALOGIN

ADCINA1/ANALOGIN(DACB)ADCINA0/ANALOGIN(DACA)

ADCIN15/ANALOGINADCIN14/ANALOGIN

ADCINB1

GPIO8/PWMOUT5AGPIO9/PWMOUT5B

GPIO11/PWMOUT6BGPIO10/PWMOUT6A

GPIO26/SD2D2

GPIO41/I2CSCLB/J9

GPIO41/I2CSCLB/J9

GPIO41/I2CSCLB/J5

GPIO40/I2CSDAB/J9GPIO40/I2CSDAB/J9

GPIO40/I2CSDAB/J5

GPIO17

A

B

C

D

E

A

B

C

D

E

1 2 3 4 5 6

www.ti.com LAUNCHXL-F28379D Hardware

19SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 10. LAUNCHXL-F28379D_B Schematic

Page 20: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

EX_Headers

CAN

LEVEL SHIFT

ABI

GNDPWR

ABI

GNDPWR

1.1

Roy

MCU002

+5V +3V3

2.2k

GND

120

10K

10K

0R

0R

+3V3

GNDGND

0.1u

GND

0.1u

GND

0.1u

GND

GND

+3V3

PGND

HEADER 1X03

+5V

+5V

GND

GND

1K 1K 1K

0.001u 0.001u 0.001u

1K 1K 1K

0.001u 0.001u0.001u

GND

GND

+3V3

+5V

+5V

J14

J15

A1P$1

A2P$3

A3P$4

A4P$5

A5P$6

A6P$7

B1P$16

B2P$14

B3P$13

B4P$12

B5P$11

B6P$10

GNDP$9

OEP$8

VCCAP$2

VCCBP$15

U2

R2

CANHP$7

CANLP$6

DP$1

ENP$5

GN

DP

$2

RP$4

RSP$8

VC

CP

$3U3

R34

123

J12

R35

R42

R43

R44

C31

C32

C37

123

J10

12345

QEP_A

12345

QEP_B

R13 R29 R48

C50 C51 C52

R49 R50 R51

C53C54 C55 GPIO55

GPIO99

GPIO20EQEP1A

EQEP1A

EQEP1B

EQEP1B

EQEP1I

EQEP1I

EQEP2A

EQEP2A

EQEP2B

EQEP2B

EQEP2I

EQEP2I

CANH

CANL

GPIO54

GPIO12

GPIO17

GPIO21

GPIO57

A

B

C

D

E

A

B

C

D

E

1 2 3 4 5 6

+3V3GNDGND

LAUNCHXL-F28379D Hardware www.ti.com

20 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 11. LAUNCHXL-F28379D Ex_Headers Schematic

Page 21: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

+

+

+

U1

+

+

+

1

5

1

5

1

A1 A19

W1 W19

ON

12

3

11

R1

U11

CON1

J19J20

www.ti.com LAUNCHXL-F28379D Hardware

21SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

6.3 PCB LayoutFigure 12 through Figure 22 shows the LAUNCHXL-F28379D PCB layout.

Figure 12. Top Silk Figure 13. Top Layer

Figure 14. Top Copper Figure 15. Inner Copper 1

Figure 16. Inner Copper 2 Figure 17. Inner Copper 3

Figure 18. Inner Copper 4 Figure 19. SMT

Page 22: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

C70

12

59

60

LAUNCHXL-F28379D Hardware www.ti.com

22 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Figure 20. Bottom Silk Figure 21. Bottom Layer

Figure 22. Bottom Copper

Page 23: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com LAUNCHXL-F28379D Hardware

23SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

6.4 Bill of Materials (BOM)Table 5 lists the LAUNCHXL-F28379D bill of materials.

Table 5. LAUNCHXL-F28379D Bill of Materials

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

1 TactileSwitch

B3F-3152

1 S3 OMRON SWITCHTACTILESPST-NO0.05A24V

YES Active LEADFREE

SW410-ND

SW410-ND

YES Active LEADFREE

SWITCHTACTILESPST-NO0.05A24V

OmronElectronics Inc-EMC Div

B3F-3152

2 PinHeader

61300211121

6 JP1,JP2,JP3,JP4,JP5, JP6

WURTH Connector PinHeader,2.54pitch,1X2Pin,6,2.54,3,black,Dip,PBT

YES Active LEADFREE

REACHNOTAFFECTED

Jun-2015 732-5315-ND

732-5315-ND

YES Active REACHNOTAFFECTED

LEADFREE

Jun-2015 CONNHEADER2 POS2.54

WurthElectronics Inc

61300211121

3 PinHeader

61300511121

2 QEP_A,QEP_B

WURTH Connector PinHeader,2.54pitch,1X5Pin,6,2.54,3,black,Dip,PBT

YES Active LEADFREE

REACHNOTAFFECTED

Jun-2015 732-5318-ND

732-5318-ND

YES Active REACHNOTAFFECTED

LEADFREE

Jun-2015 CONNHEADER5 POS2.54

WurthElectronics Inc

61300511121

4 ThickfilmResistor

RC1206JR-7W0RL

9 R16,R18,R19,R20,R21,R25,R28,R30,R32

YAGEO RES,0R,5%,1/2W,SMD1206

5 CeramicCapacitor

GRM155R71H102KA01D

7 C40,C50,C51,C52,C53,C54,C55

MURATA CAP,1NF,±10%,X7R,50V,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-1303-1-ND

490-1303-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER1000PF50V X7R0402

MurataElectronics NorthAmerica

GRM155R71H102KA01D

Page 24: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

LAUNCHXL-F28379D Hardware www.ti.com

24 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

6 CeramicCapacitor

GRM155R61A104KA01D

33 C1, C5,C9, C12,C13,C14,C16,C24,C28,C30,C31,C32,C33,C34,C35,C36,C37,C39,C43,C56,C57,C58,C59,C60,C61,C62,C63,C64,C65,C66,C67,C73,C74

MURATA CAP,100NF(0.1×µf),±10%,X5R,10V,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-1318-1-ND

490-1318-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER0.1µF10V X5R0402

MurataElectronics NorthAmerica

GRM155R61A104KA01D

7 CeramicCapacitor

GRM155R61A224KE19D

1 C83 MURATA CAP,220NF,±10%,X5R,10V,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-3910-1-ND

490-3910-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER0.22µF10V X5R0402

MurataElectronics NorthAmerica

GRM155R61A224KE19D

8 ThickfilmResistor

ERJ-2GE0R00X

4 R15,R33,R43,R44

PANASONIC

RES,0R,±5%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P0.0JCT-ND

P0.0JCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD0.0OHMJUMPER1/10W0402

PanasonicElectronicComponents

ERJ-2GE0R00X

9 ThickfilmResistor

ERJ-2RKF1003X

1 R47 PANASONIC

RES,100K Ω, 1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P100KLCT-ND

P100KLCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD100K Ω1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF1003X

10 CeramicCapacitor

GRM1555C1H101JA01D

2 C20,C82

MURATA CAP,100PF,±5%,C0G,50V,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-5922-1-ND

490-5922-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER100PF50V NP00402

MurataElectronics NorthAmerica

GRM1555C1H101JA01D

Page 25: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com LAUNCHXL-F28379D Hardware

25SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

11 ThickfilmResistor

ERJ-2RKF1002X

5 R12,R14,R35,R42,R45

PANASONIC

RES,10K,±1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P10.0KLCT-ND

P10.0KLCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD10K Ω1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF1002X

12 Crystal ATS100B-E

1 Q1 CTS Crystal10.0000MHz30ppm18pF 60Ω -40°C- 85°CThroughHoleHC49/US

YES Active LEADFREE

CTX919-ND

CTX919-ND

YES Active LEADFREE

CRYSTAL10.0000MHZ18PFT/H

CTS-FrequencyControls

ATS100B-E

13 CeramicCapacitor

GRM188C80G106ME47D

5 C68,C69,C70,C79,C81

MURATA CAPCER10µF 4V20% X6S0603

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-10470-1-ND

490-10470-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER10µF 4VX6S0603

MurataElectronics NorthAmerica

GRM188C80G106ME47D

14 CeramicCapacitor

GRM32NF51E106ZA01L

2 C41,C44

MURATA CAPCER10µF25V Y5V1210

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-1893-1-ND

490-1893-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER10µF25V Y5V1210

MurataElectronics NorthAmerica

GRM32NF51E106ZA01L

15 ThickfilmResistor

ERJ-2RKF1200X

1 R34 PANASONIC

RES,120 µ,1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P120LCT-ND

P120LCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD 120Ω 1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF1200X

16 Crystal ABLS2-12.000MHZ-D4Y-T

1 Q3 ABRACON

Crystal12MHz±30ppm(Tol)±30ppm(Stability)18pFFUND50Ohm2-PinHC-49/USSMD T/R

YES Active LEADFREE

REACHAFFECTED

Dec-2015

535-9869-1-ND

535-9869-1-ND

YES Active REACHAFFECTED

LEADFREE

Dec-2015

CRYSTAL12.0000MHZ18PFSMD

AbraconLLC

ABLS2-12.000MHZ-D4Y-T

17 ThickfilmResistor

CRCW040212R0JNED

2 R58,R65

VISHAY RESSMD 12Ω 5%1/16W0402 TR

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2011

541-12JCT-ND

541-12JCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2011

RESSMD 12Ω 5%1/16W0402

VishayDale

CRCW040212R0JNED

Page 26: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

LAUNCHXL-F28379D Hardware www.ti.com

26 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

18 ThickfilmResistor

ERJ-2RKF1202X

1 R24 PANASONIC

RES,12KΩ, 1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P12.0KLCT-ND

P12.0KLCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD12K Ω1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF1202X

19 ThickfilmResistor

ERJ-2RKF1783X

1 R53 PANASONIC

RES,178K Ω,1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P178KLCT-ND

P178KLCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD178K Ω1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF1783X

20 ThickfilmResistor

ERJ-2RKF1001X

13 R3,R13,R22,R23,R29,R36,R37,R40,R41,R48,R49,R50,R51

PANASONIC

RES, 1KΩ, 1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P1.00KLCT-ND

P1.00KLCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD 1KΩ 1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF1001X

21 ThickfilmResistor

ERJ-2RKF1004X

1 R7 PANASONIC

RES, 1MΩ, 1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P1.00MLCT-ND

P1.00MLCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD 1MΩ 1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF1004X

22 Diode 1N5819HW-7-F

1 D3 DIODES Diode,SchottkyDiode,1N5819HW-7-F,40V,1A,SOD-123,SMD,-65~125,TR

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

1N5819HW-FDICT-ND

1N5819HW-FDICT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

DIODESCHOTTKY 40V1ASOD123

DiodesIncorporated

1N5819HW-7-F

23 CeramicCapacitor

GRM155R60J105KE19D

5 C6, C7,C19,C21,C22

MURATA CAP,1UF,±10%,X5R,6.3V,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-1320-1-ND

490-1320-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER1UF6.3VX5R0402

MurataElectronics NorthAmerica

GRM155R60J105KE19D

24 Inductor LQH3NPN1R0NJ0L

1 L8 MURATA FIXEDIND 1µH1.62A 40MΩSMD,±30%

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-5342-1-ND

490-5342-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

FIXEDIND 1µH1.62A 40MΩ SMD

MurataElectronics NorthAmerica

LQH3NPN1R0NJ0L

Page 27: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com LAUNCHXL-F28379D Hardware

27SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

25 ThickfilmResistor

ERJ-2RKF2201X

6 R2, R6,R8, R9,R10,R31

PANASONIC

RES,2.2K Ω,1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P2.20KLCT-ND

P2.20KLCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD2.2K Ω1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF2201X

26 CeramicCapacitor

GRM155R60G225ME15D

14 C2, C27,C29,C42,C46,C47,C48,C49,C71,C72,C75,C76,C77,C78

MURATA CAPCER2.2µF 4V20%X5R0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-4518-1-ND

490-4518-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER2.2µF 4VX5R0402

MurataElectronics NorthAmerica

GRM155R60G225ME15D

27 Inductor CDRH2D18/HPNP-2R2NC

1 L7 SUMIDA PowerInductor,Magneticshielded,2.2uH,1.6A,0.06ohm,3.0X3.0X1.8mm,SMD

YES Active LEADFREE

308-2295-2-ND

308-2295-2-ND

YES Active LEADFREE

FIXEDIND2.2µH1.9A 60MΩ SMD

SumidaAmericaComponents Inc.

CDRH2D18/HPNP-2R2NC

28 DIPSwitch

219-3MST

1 S1 CTS Switch,DIPSwitches,3Position,2.54MMPitch,blackhousing,whiteplunger,SMD

YES Active LEADFREE

REACHNOTAFFECTED

Jul-2011 CT2193MST-ND

CT2193MST-ND

YES Active REACHNOTAFFECTED

LEADFREE

Jul-2011 SWITCHTAPESEAL 3POSSMD50V

CTSElectrocomponents

219-3MST

29 FerriteBead

BKP1005EM221-T

2 L5, L11 TaiyoYuden

FERRITE BEAD220 Ω0402,±25%

YES Active LEADFREE

587-3290-1-ND

587-3290-1-ND

YES Active LEADFREE

FERRITE BEAD220 Ω04021LN

TaiyoYuden

BKP1005EM221-T

30 CeramicCapacitor

GRM188C80G226MEA0D

3 C23,C38,C80

MURATA CAPCER22µF 4V20% X6S0603

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-7196-1-ND

490-7196-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER22µF 4VX6S0603

MurataElectronics NorthAmerica

GRM188C80G226MEA0D

Page 28: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

LAUNCHXL-F28379D Hardware www.ti.com

28 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

31 CeramicCapacitor

GRM32ER71A226KE20L

1 C45 MURATA CAPCER22µF10V 10%X7R1210

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-1876-1-ND

490-1876-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER22µF10V X7R1210

MurataElectronics NorthAmerica

GRM32ER71A226KE20L

32 ThickfilmResistor

RC0402FR-072KL

4 R56,R57,R63,R64

YAGEO RES,2K,±1%,1/16W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

311-2KLRCT-ND

311-2KLRCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

RESSMD 2KΩ 1%1/16W0402

Yageo RC0402FR-072KL

33 CeramicCapacitor

C1005X5R0G335M050BB

1 C15 TDK CAPCER3.3µF 4V20%X5R0402?PN?C1005X5R0G335MTJ00F

YES Active LEADFREE

REACHNOTAFFECTED

Jun-2015 445-7397-1-ND

445-7397-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Jun-2015 CAPCER3.3UF4V X5R0402

TDKCorporation

C1005X5R0G335M050BB

34 Inductor CDRH3D16/HPNP-3R3NC

1 L6 SUMIDA PowerInductor,Magneticshielded,3.3uH,1.4A,0.085ohm,3.8X3.8X1.6mm,SMD

YES Non-Stock

LEADFREE

308-1981-1-ND

308-1981-1-ND

YES Non-Stock

LEADFREE

FIXEDIND3.3µH1.8A 85MOHMSMD

SumidaAmericaComponents Inc.

CDRH3D16/HPNP-3R3NC

35 ThickfilmResistor

ERJ-2RKF3012X

1 R17 PANASONIC

RES,30.1K Ω,1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P30.1KLCT-ND

P30.1KLCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD30.1K Ω1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF3012X

36 ThickfilmResistor

ERJ-2RKF3300X

4 R26,R27,R38,R39

PANASONIC

RES,330 Ω,1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P330LCT-ND

P330LCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD 330Ω 1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF3300X

37 CeramicCapacitor

C1005C0G1H360J

4 C3, C4,C17,C18

TDK CAPCER36PF50V C0G0402

YES Obsolete LEADFREE

REACHNOTAFFECTED

Apr-2011 445-4903-1-ND

445-4903-1-ND

YES Obsolete REACHNOTAFFECTED

LEADFREE

Apr-2011 CAPCER36PF50V C0G0402

TDKCorporation

C1005C0G1H360J

38 ThickfilmResistor

ERJ-2RKF3922X

1 R55 PANASONIC

RES,39.2K Ω,1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P39.2KLCT-ND

P39.2KLCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD39.2K Ω1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF3922X

Page 29: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com LAUNCHXL-F28379D Hardware

29SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

39 CeramicCapacitor

GRM155R60J475ME47D

3 C8, C10,C11

MURATA CAP,4.7UF,±20%,X5R,6.3V,SMD0402 fixPN addD?20151023?

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-5915-1-ND

490-5915-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER4.7µF6.3VX5R0402

MurataElectronics NorthAmerica

GRM155R60J475ME47D

40 ThickfilmResistor

RC0402FR-0749R9L

2 R59,R62

YAGEO RES,49R9,±1%,1/16W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

311-49.9LRCT-ND

311-49.9LRCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

RESSMD49.9 Ω1%1/16W0402

Yageo RC0402FR-0749R9L

41 ThickfilmResistor

RC0402FR-074K02L

2 R60,R61

YAGEO RES,4K02,±1%,1/16W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

311-4.02KLRCT-ND

311-4.02KLRCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

RESSMD4.02K Ω1%1/16W0402

Yageo RC0402FR-074K02L

42 Polyswitch

MF-MSMF050-2

1 F1 BOURNS

PTCRESETTABLE.50A 15V1812

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

MF-MSMF050-2CT-ND

MF-MSMF050-2CT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

PTCRESETTABLE.50A 15V1812

BournsInc.

MF-MSMF050-2

43 ThickfilmResistor

ERJ-2BQFR56X

2 R11,R52

PANASONIC

RES,0.56 Ω, 1%,1/6W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P.56AKCT-ND

P.56AKCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD0.56 Ω1% 1/6W0402

PanasonicElectronicComponents

ERJ-2BQFR56X

44 FerriteBead

BLM15PD600SN1D

2 L3, L4 MURATA FerriteBead,60ohm@100MHz,±25%,1700mA,0.06ohm,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Jun-2015 490-5201-1-ND

490-5201-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Jun-2015 FERRITE BEAD60 Ω04021LN

MurataElectronics NorthAmerica

BLM15PD600SN1D

45 ThickfilmResistor

ERJ-2RKF6492X

1 R54 PANASONIC

RES,64.9K Ω,1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P64.9KLCT-ND

P64.9KLCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD64.9K Ω1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF6492X

46 ThickfilmResistor

ERJ-2RKF8200X

4 R1, R4,R5, R46

PANASONIC

RES,820 Ω,1%,1/10W,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2014

P820LCT-ND

P820LCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2014

RESSMD 820Ω 1%1/10W0402

PanasonicElectronicComponents

ERJ-2RKF8200X

Page 30: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

LAUNCHXL-F28379D Hardware www.ti.com

30 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

47 CeramicCapacitor

GRM155R71H821KA01D

1 C25 MURATA CAPCER820PF50V 10%X7R0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-3250-1-ND

490-3250-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER820PF50V X7R0402

MurataElectronics NorthAmerica

GRM155R71H821KA01D

48 Memory 93LC56BT-I/OT

1 U8 MICROCHIP

IC,EEPROMSerial-Microwire 2K-Bit128 x 162MHz,93LC56BT-I/OT,SOT-23-6,SMD

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

93LC56BT-I/OTCT-ND

93LC56BT-I/OTCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

ICEEPROM 2KBIT2MHZSOT23-6

MicrochipTechnology

93LC56BT-I/OT

49 FerriteBead

BLM15AG601SN1D

2 L1, L2 MURATA FerriteBead,600ohm@100MHz,±25%,300mA,0.6ohm,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Jun-2015 490-1006-1-ND

490-1006-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Jun-2015 FERRITE BEAD600 Ω04021LN

MurataElectronics NorthAmerica

BLM15AG601SN1D

50 PinSocket

CRD-081413-G-A

4 J1,J2?J3?J4?J5?J6?J7?J8

MAJORLEAGUE

Connector,PinSocket,Straight,Female,2x10Pin,2.54MMpitch,8.51,9.91,Gold Flash1u,black,DIP

51 LED APHHS1005QBC/D

2 D7, D10 KINGBRIGHT

LED1X0.5mm470NMBlueWTRCLEARSMD

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

754-1504-1-ND

754-1504-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

LEDBLUECLEAR0402SMD

Kingbright

APHHS1005QBC/D

52 BTBConnector

DF40C-60DP-0.4V(51)

1 J9 HIROSE CONNHDR60POS0.4MMSMDGOLDTR

YES Active LEADFREE

H11628CT-ND

H11628CT-ND

YES Active LEADFREE

CONNHDR60POS0.4MMSMDGOLD

HiroseElectricCo Ltd

DF40C-60DP-0.4V(51)

Page 31: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com LAUNCHXL-F28379D Hardware

31SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

53 Interface FT2232HQ-REEL

1 U6 FTDI IC,DualHighSpeedUSB toMultipurposeUART/FIFOIC,FT2232HQ-REEL,QFN-64,SMD

YES Active LEADFREE

REACHNOTAFFECTED

Jun-2015 768-1025-1-ND

768-1025-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Jun-2015 IC USBHSDUALUART/FIFO 64-QFN

FTDI,FutureTechnologyDevicesInternational Ltd

FT2232HQ-REEL

54 LED APHHS1005CGCK

2 D1, D4 KINGBRIGHT

LED1X0.5MM570NMGreenWTRCLRSMD

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

754-1101-1-ND

754-1101-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

LEDGREENCLEAR0402SMD

Kingbright

APHHS1005CGCK

55 PinHeader

61300311121

4 J10,J11,J12,J13

WURTH Connector PinHeader,2.54pitch,1X3Pin,6,2.54,3,black,Dip,PBT,Gold

YES Active LEADFREE

REACHNOTAFFECTED

Jun-2015 732-5316-ND

732-5316-ND

YES Active REACHNOTAFFECTED

LEADFREE

Jun-2015 CONNHEADER3 POS2.54

WurthElectronics Inc

61300311121

56 Isolator ISO7231CDWR

1 U7 TI IC DGTLISO 3CHCMOS16SOIC,CUSTOMERSUPPLY

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

296-38966-1-ND

296-38966-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

DGTLISO2.5KVGENPURP16SOIC

TexasInstruments

ISO7231CDWR

57 Isolator ISO7240CDWR

1 U5 TI IC DGTLISO 4CHCMOS16SOIC,CUSTOMERSUPPLY

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

296-38555-1-ND

296-38555-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

DGTLISO2.5KVGENPURP16SOIC

TexasInstruments

ISO7240CDWR

58 DC-DC LMR62421XMFE/NOPB

1 U12 TI ConvDC-DCSingleStep Up2.7V to5.5V 5-Pin SOT-23 T/R,CUSTOMERSUPPLY

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

LMR62421XMFE/NOPBCT-ND

LMR62421XMFE/NOPBCT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

IC REGBSTSEPICADJ2.1ASOT23

TexasInstruments

LMR62421XMFE/NOPB

Page 32: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

LAUNCHXL-F28379D Hardware www.ti.com

32 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

60 Shunt MJ501-EOGF-B-K

7 U$2,U$10,U$11,U$12,U$13?U$14,U$17

TOWNES

Connector,Shunt,2Pin,2.54MMPitch,6MMHeight,Gold Flash1µ,black,Bulk

61 LED APHHS1005SURCK

2 D8, D9 KINGBRIGHT

LED1X0.5MM630NMRedWTRCLRSMD

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

754-1104-1-ND

754-1104-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

LEDREDCLEAR0402SMD

Kingbright

APHHS1005SURCK

62 RFConnector

152123 2 J19,J20 Amphenol

RFConnectors /CoaxialConnectors SMCRIGHTANGLEJCKPCBGOLDTHBULK

YES Active LEADFREE

ACX1509-ND

ACX1509-ND

YES Active LEADFREE

CONNSMCJACKR/A 50OHMPCB

Amphenol-RFDivision

152123

63 Interface SN65HVD234DR

1 U3 TI IC CANTRANSCEIVER3.3V 8-SOIC

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

296-27991-1-ND

296-27991-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

IC CANTRANSCEIVER3.3V 8-SOIC

TexasInstruments

SN65HVD234DR

64 Logic SN74LVC2G07DBVR

1 U9 TI Buffer/Driver 2-CHNon-InvertingOpenDrainCMOS 6-Pin SOT-23T/R,CUSTOMERSUPPLY

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

296-13494-1-ND

296-13494-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

ICBUFF/DVR DLNON-INVSOT23-6

TexasInstruments

SN74LVC2G07DBVR

65 Amplifier THS4531IDGKR

1 U$9 TI ICOPAMPDIFF27MHZRRO8VSSOPTR

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

296-30342-1-ND

296-30342-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

ICOPAMPDIFF27MHZRRO8VSSOP

TexasInstruments

THS4531IDGKR

Page 33: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com LAUNCHXL-F28379D Hardware

33SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

66 MCU TMS320F28379DZWTT

1 U14 TI IC, MCU32BIT1024KB,TMS320F28379DZWTT,BGA-337,SMD,customer supply

YES Non-Stock

LEADFREE

REACHNOTAFFECTED

Dec-2015

TMS320F28379DZWTT-ND

TMS320F28379DZWTT-ND

YES Non-Stock

REACHNOTAFFECTED

LEADFREE

Dec-2015

IC MCU32BIT1MBFLASH337NFBGA

TexasInstruments

TMS320F28379DZWTT

67 DC-DC TPS62080ADSGT

1 U4 TI IC REGBUCKSYNCADJ1.2A8WSON

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

296-30360-1-ND

296-30360-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

IC REGBUCKADJ1.2ASYNC8WSON

TexasInstruments

TPS62080ADSGT

68 DC-DC TPS62162DSGT

1 U17 TI IC REGBUCKSYNC3.3V 1A8WSON

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

296-29897-1-ND

296-29897-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

IC REGBUCK3.3V 1ASYNC8WSON

TexasInstruments

TPS62162DSGT

69 Logic TXB0106PWR

1 U2 TI IC, 6-BITBIDIRECTIONALVOLTAGE-LEVELTRANSLATORWITHAUTO-DIRECTIONSENSING AND±15-kVESDPROTECTION,TXB0106PWR,TSSOP-16,SMD,CusomerSupply

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

296-23759-1-ND

296-23759-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

IC 6BITNON-INVTRANSLTR16TSSOP

TexasInstruments

TXB0106PWR

70 USBConnector

897-43-005-00-100001

1 CON1 MILL-MAX

Connector,MiniUSB Bport,5position,RightAngle,Gold flash30µ,black,SMD

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

ED90341CT-ND

ED90341CT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CONNRECEPTMINI-USBTYPE BSMT

Mill-MaxManufacturingCorp.

897-43-005-00-100001

Page 34: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

LAUNCHXL-F28379D Hardware www.ti.com

34 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

Table 5. LAUNCHXL-F28379D Bill of Materials (continued)

ITEMNO NOTE

PartNumber Quantity

REFDesignator

Manufacturer

Description ROHS

AVAILABILITY

LEADFREE

STATUSREACHSTATUS

ReachEffective

Date

Digi-KeyPartNumber(fromDigi-Keysystem)

DK PartNumberSP

ROHSSP

Availability SP

ReachSP

LeadFree

StatusSP

ReachEffectiveDate SP

DKDescription SP

DKManufacturer SP

DKManufacturerPartNumberSP

71 PinHeader

TSW-104-07-G-D

1 J21 SAMTEC Connector,PinHeader,Straight,Male,2x4Pin,2.54MMpitch,5.84,2.54,Gold Flash10µ,black,DIP

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

SAM1028-04-ND

SAM1028-04-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CONNHEADER8POS.100"DUALGOLD

SamtecInc.

TSW-104-07-G-D

72 CeramicCapcitor

GRM1555C1H360JA01D

4 C3,C4,C17,C18

MURATA CAP36pF,±5%,COG,50V,SMD0402

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

490-5937-1-ND

490-5937-1-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CAPCER36PF50V NP00402

MurataElectronics NorthAmerica

GRM1555C1H360JA01D

73 RFConnector

SMA-J-P-H-ST-EM1

2 J19, J20 SAMTEC RFConnector, SMAJack,EdgeMount,Gold,Straight,50 Ω,SMD,Tray

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

SAM8857-ND

SAM8857-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

CONNSMAJACK 50Ω EDGEMNT

SamtecInc.

SMA-J-P-H-ST-EM1

74 Amplifier OPA350EA/250

2 U11,U19 TI ICOPAMPGP38MHZRRO8VSSOPTR

YES Active LEADFREE

REACHNOTAFFECTED

Dec-2015

OPA350EACT-ND

OPA350EACT-ND

YES Active REACHNOTAFFECTED

LEADFREE

Dec-2015

ICOPAMPGP38MHZRRO8VSSOP

TexasInstruments

OPA350EA/250

Page 35: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

www.ti.com References

35SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

7 ReferencesThe following documents describe the C2000 devices. Copies of these documents are available on theInternet at http://www.ti.com/c2000 and www.ti.com/c2000-launchpad, or click on the links below:1. TMS320F2837xD Dual-Core Delfino™ Microcontrollers Data Manual (SPRS880)2. TMS320F28379D, TMS320F28377D, TMS320F28376D, TMS320F28375D, TMS320F28374D Delfino

Microcontrollers Silicon Errata (SPRZ412)3. TMS320F2837xD Dual-Core Delfino Microcontrollers Technical Reference Guide (SPRUHM8)4. TMS320C28x Extended Instruction Sets Technical Reference Manual (SPRUHS1)5. TMS320C28x Instruction Set Simulator Technical Overview (SPRU608)6. TMS320C28x Optimizing C/C++ Compiler v6.1 User's Guide (SPRU514)7. TMS320C28x Assembly Language Tools v6.1 User's Guide (SPRU513)

Page 36: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

Frequently Asked Questions (FAQ) www.ti.com

36 SPRUI77–August 2016Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LAUNCHXL-F28379D Overview

8 Frequently Asked Questions (FAQ)1. Can other programming and debug tools (such as an XDS510 emulator) be used with the C2000

LaunchPad?While a user could potentially connect an external emulator to the F28379D device present on theLaunchPad, it would require some rework of the board. It is recommended that users who want to usean external emulator purchase a controlCard and docking station that includes an external JTAGconnector.

2. What versions of Code Composer Studio can be used to develop software for the C2000 LaunchPad?It is highly recommend that novice users develop applications with Code Composer Studio v6. Thedrivers, examples, and other associated software are tailored to make the user experience as smoothas possible in Code Composer Studio v6.

3. Why can’t I connect to the LaunchPad in Code Composer Studio?There are a number of things that could cause this and they all have an easy fix.• Is S1 switch 3 in the down position?

This is the TRST pin that enables and disables JTAG functionality on the chip. This switch must bein the up position for the emulator to be able to connect.

• Are both power LEDs lit?The board has two power domains because of the isolated JTAG interface. For low-voltageapplication development, JTAG isolation is not needed and the power domains can be combined toallow for convenience (that is, the board can be powered completely through the USB). Ensure thatjumpers are placed on the posts of JP1 and JP2.

• Are drivers correctly installed for the XDS100v2 present on the LaunchPad?Right click on My Computer and select properties. Navigate to the Hardware tab in the dialog boxand open the device manager. Scroll to the bottom of the list and expand the USB Serial Buscontrollers item. Are there two entries for TI XDS100 Channel A/B? If not, try unplugging andreplugging in the board. Does Windows give you any messages in the system tray? In DeviceManger, do either of the entries have a yellow exclamation mark over their icon? If so, tryreinstalling the drivers.

4. Why is the serial connection not working?• Are you using the correct COM port?

Right click on My Computer and select properties. Navigate to the Hardware tab in the dialog box andopen the device manager. Scroll to Ports (COM & LPT) and expand this entry. Is there a USB SerialPort listed? If so, read the COM number to the right of the entry; this is the COM number you shouldbe using.

• Are you using the correct baud rate?Most, if not all, of the examples are configured for a baud rate of 115200 when the CPU is running at200 MHz. If you have changed the PLL settings or written your own application you may have torecalculate the baud rate for your specific application. For information on how to do this, see theTMS320F2837xD Delfino Microcontrollers Technical Reference Guide (SPRUHM8).

Page 37: User's Guide - Farnell element14Open your serial terminal program and open the COM port you found previously in device manager with the following settings: 115200 Baud, 8 data bits,

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and otherchanges to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latestissue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current andcomplete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of salesupplied at the time of order acknowledgment.TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s termsand conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessaryto support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarilyperformed.TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products andapplications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provideadequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, orother intellectual property right relating to any combination, machine, or process in which TI components or services are used. Informationpublished by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty orendorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of thethird party, or a license from TI under the patents or other intellectual property of TI.Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alterationand is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altereddocumentation. Information of third parties may be subject to additional restrictions.Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or servicevoids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirementsconcerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or supportthat may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards whichanticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might causeharm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the useof any TI components in safety-critical applications.In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is tohelp enable customers to design and create their own end-product solutions that meet applicable functional safety standards andrequirements. Nonetheless, such components are subject to these terms.No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the partieshave executed a special agreement specifically governing such use.Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use inmilitary/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI componentswhich have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal andregulatory requirements in connection with such use.TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use ofnon-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Products ApplicationsAudio www.ti.com/audio Automotive and Transportation www.ti.com/automotiveAmplifiers amplifier.ti.com Communications and Telecom www.ti.com/communicationsData Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computersDLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-appsDSP dsp.ti.com Energy and Lighting www.ti.com/energyClocks and Timers www.ti.com/clocks Industrial www.ti.com/industrialInterface interface.ti.com Medical www.ti.com/medicalLogic logic.ti.com Security www.ti.com/securityPower Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defenseMicrocontrollers microcontroller.ti.com Video and Imaging www.ti.com/videoRFID www.ti-rfid.comOMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.comWireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2016, Texas Instruments Incorporated