Upload
phamlien
View
228
Download
0
Embed Size (px)
Citation preview
Z1 LED MUDCAP
Lamorinièrestraat 33-37
2018 Antwerp - Belgium
www.lazersport.com
5. How to change the batteries
1- STILL MODE 2 - FLASHING MODE #13 - FLASHING MODE #24 - FLASHING MODE #3
5 - OFF
battery
battery insulator
battery
Turn1 Lift up 2 Replace3
USER MANUAL
USER MANUAL
1. Remove the plastic battery insulation tab prior to use 3. Install the mudcap into the helmet
4. Light mode2. Insert the led into the mudcap
Z1 LED MUDCAP
1- STILL MODE 2 - FLASHING MODE #13 - FLASHING MODE #24 - FLASHING MODE #3
5 - OFF
battery
battery insulator
battery
1- STILL MODE 2 - FLASHING MODE #13 - FLASHING MODE #24 - FLASHING MODE #3
5 - OFF
battery
battery insulator
battery
1- STILL MODE 2 - FLASHING MODE #13 - FLASHING MODE #24 - FLASHING MODE #3
5 - OFF
battery
battery insulator
battery
Turn1
Insert the lower tongue of the mudcap into the groove of the led
1
Insert1
Press the button
PRESS 3 SECONDS
1
Lift up2
Gently lift the upper section of the mud-cap, whilst rotating the led into position
2
Push and click in2Pull it out3
The led is now firmly installed into the mudcap
3