Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
1
User ManualWireless ANC Headphoneswith Charging StandAria Podio
What’s in the box? ······················································································································································································ 1
Product Overview ······················································································································································································ 1
Basic Operation ··························································································································································································· 1
LED indications···························································································································································································· 2
Bluetooth Pairing························································································································································································ 2
Reconnection ······························································································································································································· 2
Using the AUX Input ·················································································································································································· 3
Charging ········································································································································································································ 3
Clear pairing history ·················································································································································································· 3
Troubleshooting ························································································································································································· 3
1
What’s in the box?
1. AS90T wireless headphones x 1
2. Charging stand x 1
3. Detachable boom microphone x 1
4. Hard travel case x 1
5. USB charging cable x 1
6. Audio cable x 1
Product Overview
/
/
/
//
ANC
X/ /
/
Basic Operation
Power ON – Slide the power switch to middle position
Power OFF – Slide the power switch to
Pairing Mode – Slide the power switch to and hold for 3s till LED blinks RED & BLUE alternately
Play / Pause music – Press once
Volume up / down – Press / once
Next / Previous track – Hold / for 2s
Answer / End a call – Press once
Last number redial – Press twice
Reject a call – Hold 2s during an incoming call
Activate / Deactivate Voice Assistant – Press once
Activate ANC – (Power ON status)
Deactivate ANC – /
Headset without boom mic – Press once to
mute / unmute
with Boom Mic – Mute On / Mute Off
Activate Voice Prompts - Hold BOTH [ ] and [ ] for 1s
Deactivate Voice Prompts - Hold BOTH [ ] and [ ] for 1s
Clear paired history - Hold BOTH [ ] and [ ] for 5s till LED blinks PINK for 2s, then the headphones
enter into PAIRING MODE automatically
2
LED indications
Working Status LED indicator
Pairing Mode Blinks BLUE & RED alternately
Reconnecting Blinks BLUE once every 1s
Disconnected Blinks BLUE once every 2s
Connected with SBC Codec Blinks BLUE once every 5s
Connected with AptX Codec Blinks BLUE twice every 5s
Connected with AptX-LL Codec Remains BLUE
Connected with AptX-HD Codec Blinks BLUE three times every 5s
Low Battery Blinks RED once every 1min
Bluetooth Pairing
Put the headphones into Pairing Mode (On 1st use, it will enter PAIRING MODE automatically once turned on.)
Pair to mobile device
Set the headphones into Pairing Mode as above. Activate Bluetooth on your phone and set it to search for new
devices. Select “Avantree AS90T”, once successfully paired you’ll hear “connected”.
To add another cell phone
Connect with the FIRST phone as above, then turn off the headphones.
Connect headphones with SECOND phone as above. Tap and select “Avantree AS90T” on the FIRST phone
Now, Avantree Aria Podio connected with TWO phones simultaneously.
Reconnection
Normally, when the next time you turn on Avantree Aria Podio, it will automatically reconnect the last paired
device.
Alternatively, Slide the power switch to [ ] once then release to enter into its Reconnection Mode.
3
Using the AUX Input
• Use the supplied 3.5mm audio cable to connect to a non-Bluetooth device.
Note: If you wish to use the ANC function in wired mode, please turn on the headphones firrst.
Charging
When the LED flashes RED once every 60 seconds, please recharge your headphones.
Please place the headphones onto the charging dock or plug it into a USB wall charger (DC 5V/0.5-2A) using
the included micro USB cable. Normally it will take about 2 hours to fully charge. Place the headphones onto
the charging dock, the LED indicator on the stand will stay solid WHITE while charging and turn GREEN when
charging is complete. While charging, the headphones’ LED will turn RED and will turn off once charging is
complete.
To assemble the hanger onto the base – please match the arrow on the hanger support with the UNLOCK
position
on the base. Insert and twist clockwise until it clicks into position.
Note: To avoid damage to headphones, please DO NOT charge the headphones using both the desktop
charging stand and the micro USB cable at the same time.
Clear pairing history
If you have issues with the audio stream skipping or cutting out when using Avantree Aria Podio (AS90T), please
try to clear pairing history as following:
Firstly, turn on the headset (Non-calling Status), then Hold BOTH [ ] and [ ] for 5s till LED blinks PINK for 2s,
then the headphones enter into PAIRING MODE automatically
Troubleshooting
https://avantree.com/catalogsearch/result?q=Aria+Podio
1. No sound with PC?
1) Under Playback Devices select the Avantree AS90T as the default playback device
2) When using AS90T to make VOIP calls from an app, please select the AS90T, Hands-Free for Microphone
and Speaker device
2. No sound using a Bluetooth transmitter to watch TV?
1) Ensure the Bluetooth transmitter and headphones are connected properly
2) Check that your audio OUTPUT is functioning properly
• AUX & RCA (red and white) outputs on TV – test audio with any wired headphone
4
• OPTICAL output on TV – set your TV audio format to “PCM/LPCM” or turns off Dolby/DTS
3) Change your TV audio out device setting to External speakers/Headset
3. Headphones do not pair with Bluetooth device
1) Ensure the AS90T is in Pairing mode – LED will flash BLUE and RED alternately.
2) For Bluetooth transmitter, ensure the transmitter is in Pairing mode – please refer to user manual.
3) For mobile phones, tablets and PCs:
• Turn the Bluetooth off then on again.
• Delete/forget the “Avantree AS90T” from your device’s Bluetooth list and then try to pair again
• Clear the headphone’s pairing history, and pair again
BedienungsanleitungWireless ANC Headphoneswith Charging StandAria Podio
Schnellanleitung ························································································································································································· 1
Bedienung ···································································································································································································· 1
Bluetooth-Paarung ···················································································································································································· 1
Nutzung des AUX-Inputs ········································································································································································· 2
Ladevorgang ································································································································································································ 2
1
Schnellanleitung
/
/
/
//
ANC
X/ /
/
Bedienung
Strom AN – Schieben Sie den An- / Ausschalter in die Mitte
Strom AUS – Schieben Sie den An- / Ausschalter auf
Paarungsmodus – Schieben Sie den An- / Ausschalter auf und halten Sie 3 Sekunden lang
gedrückt, bis die LED-Anzeige abwechselnd ROT & BLAU aufleuchtet.
Musik spielen/ anhalten – einmal
drücken
Lautstärke hoch/ runter – / einmal
drücken
Nächstes / voriges Lied – / 2
Sekunden lang gedrückt halten
Anruf annehmen/ beenden – einmal drücken
Anruf ablehnen – 2 Sekunden gedrückt halten,
während ein Anruf eingeht
Zuletzt gewählte Nummer erneut anrufen –
zweimal drücken
Sprachassistenten aktivieren/ deaktivieren –
einmal drücken
ANC aktivieren – (im eingeschalteten
Zustand)
ANC deaktivieren –
/
> auf dem Headset einmal drücken
> / ; Schieben Sie den Schalter auf /
gegenüber von
Bluetooth-Paarung
• Setzen Sie die Kopfhörer in den Paarungsmodus (bei der ersten Verwendung gehen diese automatisch in den
PAARUNGSMODUS, sobald sie eingeschaltet werden).
• Aktivieren Sie die Bluetooth-Funktion auf Ihrem Handy. Suchen & wählen Sie „Avantree AS90T“, sobald eine
Verbindung besteht, hören Sie die Ansage „verbunden“.
2
Nutzung des AUX-Inputs
• Verwenden Sie das mitgelieferte 3,5mm Audiokabel, um eine Verbindung mit einem Gerät ohne Bluetooth-
Funktion herzustellen.
Hinweis: Wenn Sie die ANC-Funktion im verkabelten Zustand nutzen möchten, schalten Sie bitte
zuerst die Kopfhörer ein.
Ladevorgang
Wenn die LED alle 60 Sekunden einmal ROT auf blinkt, laden Sie bitte Ihre Kopfhörer auf.
Bitte setzen Sie die Kopfhörer auf die Ladestation oder schließen Sie diese an einem USB-Wandladegerät (DC
5V/0,5-2A) mit dem mitgelieferten Mikro-USB-Kabel an. Normalerweise dauert der Ladevorgang 2 Stunden.
Beim Laden leuchtet die LED ROT und geht aus, sobald der Ladevorgang abgeschlossen ist.
Setzen Sie die Kopfhörer auf die Ladestation. Die LED-Anzeige am Ständer leuchtet durchgehend WEISS beim
Aufladen und GRÜN, sobald der Ladevorgang abgeschlossen ist.
Um den Aufhänger an der Basis anzubringen – bringen Sie den Pfeil am Aufhänger mit der ENTSPERREN
Position an der Basis auf eine Linie. Setzen Sie diesen ein und drehen Sie ihn im Uhrzeigersinn, bis er einrastet.
Hinweis: Um eine Beschädigung der Kopfhörer zu vermeiden, laden Sie die Kopfhörer NICHT gleichzeitig mit
dem Tischladeständer und dem Micro-USB-Kabel auf.
Mode d’emploiWireless ANC Headphoneswith Charging StandAria Podio
Guide rapide ································································································································································································· 1
Fonctions de base ······················································································································································································ 1
Association Bluetooth ·············································································································································································· 1
Utilisation de l’entrée Aux jack ······························································································································································ 1
Recharge ········································································································································································································ 2
1
Guide rapide
/
/
/
//
ANC
X/ /
/
Fonctions de base
Marche – Glisser le bouton d'alimentation au milieu
Arrêt – Glisser le bouton d'alimentation vers
Appairage – Glisser et maintenir 3s le boutond’alimentation vers , les LED clignotent, jusqu'à ce
que le voyant LED clignote alternativement en ROUGE et BLEU.
Lecture / Pause – Appuyer 1x
Volume +/- – Appuyer / 1x
Piste Suivante / Précédente – Appuyer
/ 2s
Prise / Fin d’appel – Appuyer 1x
Rejet d’appel – Appuyer 2s durant un appel entrant
Recomposer dernier N° – Appuyer 2x
Activer/ Désactiverl’assistance vocale – Appuyer 1x
ANC aktivieren – (im eingeschalteten
Zustand)
ANC deaktivieren –
/ > Appuyer 1x
– / ; Glisser le bouton vers / à l’opposé de
Association Bluetooth
• Mettez le casque en appairage (à la 1ière mise en marche, il entrera automatiquement en appairage).
• Activer le Bluetooth sur votre téléphone. Rechercher& sélectionner “Avantree AS90T”. Une fois associé, vous
entendrez au casque “connected.”
Utilisation de l’entrée Aux jack
• Utiliser le câble jack 3.5mm fourni pour connecter le casque à un équipement dépourvu du Bluetooth.
Note: pour utiliser la fonction ANC en filaire, mettez d’abord en marche le casque.
2
Recharge
Lorsque le voyant clignote en ROUGE toutes les 60 secondes, veuillez recharger votre casque.
Placez le casque sur sa station de charge ou branchez-le sur un chargeur mural USB (DC 5V / 0.5-2A) via le câble
micro USB fourni. Normalement, une rechargecomplète prend environ 2 heures. Pendant le chargement, le
voyant devient ROUGE et s'éteint une fois le chargement terminé.
Placez le casque sur la station de charge. Le voyant à LED du support reste BLANC pendant la charge et passe au
VERT une fois la charge terminée.
Pour monter le support sur la base - veuillez faire correspondre la flèche du support de suspension avec la
position UNLOCK située sur la base. Insérez et tournez dans le sens des aiguilles d'une montre jusqu'à ce que
vous entendiez un clic.
Note: pour éviter d'endommager les écouteurs, veuillez NE PAS les recharger simultanément avec le support de
recharge pour ordinateur de bureau et le câble micro USB.
Manuale di IstruzioniWireless ANC Headphoneswith Charging StandAria Podio
Guida rapida ································································································································································································· 1
Operazioni di Base ····················································································································································································· 1
Collegamento Bluetooth ········································································································································································· 1
Utilizzare l’ingresso Aux ··········································································································································································· 1
Caricare la batteria ····················································································································································································· 2
1
Guida rapida
/
/
/
//
ANC
X/ /
/
Operazioni di Base
Accendere ON – Far scorrere l’interruttore in mezzo
Spegnere OFF – Far scorrere l’interruttore fino a
Collegare Pairing – Far scorrere l’interruttore fino a e tenere per 3s, fino a quando il Led non
lampeggia in ROSSO e BLU in modo alternato
Musica Play / Pausa – Premere
Volume su / giù – Premere /
Tracce Avanti / Indietro – Tenere /
per 2sec
Chiamate rispondere / Chiudere – Premere
Rifiutare – Premere 2secmentre arriva chiamata
Richiamare ultimo numero – Premere due volte
Attivare / Disattivare Assistente vocale – Premere
Attivare ANC – (mentre è acceso)
Disattivare ANC – /
– premere sulla cuffia
– / ; Scorrere l’interruttore fino a / opposto a
Collegamento Bluetooth
• Mettete le cuffie in modalità collegamento (Durante il primo utilizzo, entreranno in modalità Pairing
automaticamente appena si accendono).
• Accendete il Bluetooth sul vostro telefono. Cercate e selezionate “Avantree AS90T”, una volta collegate,
sentirete “connected.”
Utilizzare l’ingresso Aux
• Usate il cavo in dotazione da 3.5mm audio per collegare un dispositivo non Bluetooth.
Nota: Se volete utilizzare la funzione ANCcon il cavo, accendete la cuffia prima.
2
Caricare la batteria
Quando il LED lampeggia rosso una volta ogni 60 secondi, ricaricare le cuffie.
Posizionare le cuffie sulla dock di ricarica o collegarla a un caricabatterie USB (DC 5V/0.5-2A) tramite il cavo
micro USB incluso. Normalmente ci vorranno circa 2 ore per caricare completamente. Durante la ricarica, il LED
diventa rosso fisso e si spegne una volta completata la ricarica.
Posizionare le cuffie sul dock di ricarica. L'indicatore LED sul supporto rimarrà fisso BIANCO durante la ricarica e
diventerà VERDE quando la ricarica è completa.
Per assemblare il gancio sulla base – si prega di allineare la freccia sul supporto del gancio con la posizione
UNLOCK sulla base. Inserire e ruotare in senso orario fino a quando non fa clic in posizione.
Nota: per evitare di danneggiare le cuffie, NON caricare le cuffie utilizzando contemporaneamente il supporto
di ricarica desktop e il cavo micro USB.
Manual de UsuarioWireless ANC Headphoneswith Charging StandAria Podio
Guía Rápida ·································································································································································································· 1
OperacionesBásicas ··················································································································································································· 1
EmparejamientoBluetooth ····································································································································································· 1
Uso de la entrada Aux ··············································································································································································· 1
Carga ··············································································································································································································· 2
1
Guía Rápida
/
/
/
//
ANC
X/ /
/
OperacionesBásicas
Interruptor ON – Deslice el interruptor al centro
Interruptor OFF – Deslice el interruptor a
Modo de emparejamiento – Deslice el interruptor a y manténgalodurante 3 segundos, hasta que
el indicador alterne luz roja y azul.
Reproduzca / Pause música – Presione
unavez
Subir / Bajarvolumen – Presione /
unavez
Siguiente / Anterior pista – Mantenga
/ durante 2segundos
Conteste / Termineunallamada – Presione unavez
Rechaceunallamada – Mantenga 2 segundos
mientrashayaunallamadaentrante
Últimonúmeroremarcado – Presione dos veces
Active / Desactiveel asistente de voz – Presione unavez
Attivare ANC – (mentre è acceso)
Disattivare ANC – /
– Presione en el auricular unavez
– / ; Desliceel interruptor a / opuesto a
EmparejamientoBluetooth
• Ajustelosauricularesenmodo de emparejamiento (Para el primer uso, entraráenMODO DE EMPAREJAMIENTO
automáticamentecuandoestéen cendido.)
• Active Bluetooth ensuteléfono. Busque y Seleccione“Avantree AS90T”,unavezemparejado, oirá “connected”
(conectado).
Uso de la entrada Aux
• Use el cable de audio suministrado de 3.5mm para conectarse a un dispositivo sin Bluetooth.
Nota: Si deseausar la función ANC enmodo “cableado”, por favor enciendalosauriculares primero.
2
• Usate il cavo in dotazione da 3.5mm audio per collegare un dispositivo non Bluetooth.
Nota: Se volete utilizzare la funzione ANCcon il cavo, accendete la cuffia prima.
Carga
Cuando el LED parpadee en ROJO una vez cada 60 segundos, recargue los auriculares.
Por favor, coloque los auriculares en la base de carga o conéctelos a un cargador de pared USB (DC 5V/0.5-
2A) a través del cable micro USB incluido. Normalmente le llevará alrededor de 2 horas cargar completamente.
Durante la carga, el LED se volverá ROJO y se apagará una vez completada la carga.
Coloque los auriculares en la base de carga. El indicador LED del soporte permanecerá BLANCO fijo mientras se
carga y se volverá VERDE cuando se complete la carga.
Para montar el colgador en la base – por favor, haga coincidir la flecha en el soporte del colgador con la posición
DESBLOQUEAR en la base. Inserte y gire en el sentido de las agujas del reloj hasta que encaje en su posición.
Nota: Para evitar daños a los auriculares, NO cargue los auriculares utilizando el soporte de carga de escritorio y
el cable micro USB al mismo tiempo.