Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
User Manual & Warranty
2
How-To-VideosFor help with assembly, assembly with cabling, charging and various other topics please visit our online how-to-videos at: www.armodilo.com
3
4
Contents05 Thank You
06 What You’ll Find in the Case
08 Unpacking and Setting up your Armodilo
10 Assembly Instructions › Floor Configuration
18 Assembly Instructions › Desktop Configuration
26 Assembly Instructions › Wall Mounting Options
34 Additional Safety Mounting
35 Kensington® Security Slot
36 Taking care of your Armodilo
38 Ordering Upgrades or Replacement Parts
39 Warranty Information
40 Obtaining Service Under Warranty
41 Important Safety Information
42 General Precautions
Important: Read all the setup instructions and safety information provided in this user manual carefully.
Contents
5
Thank youThank you for purchasing an Armodilo(ex)™ Tablet Display Stand.
Each Armodilo(ex) Tablet Display Stand has been manufactured to the highest quality specifications and checked by one of our quality assurance team members to meet our highest standards. If you have any questions regarding your display stand, please contact us for immediate assistance.
Let’s get your display stand unpacked and setup.
Thank you
Need help? Call or e-mail us Monday–Friday 8:30–4:30 [email protected]
6
What you’ll find in the caseYour Armodilo(ex)™ Tablet Display Stand comes with everything you need to start showcasing almost immediately. Simply add your specified tablet device, fire up your desired application and you’re ready to rock.
What you’ll find in the case
Kiosk HousingA. “Kiosk” HousingB. Tablet “Fit Kit” Inserts (x2)C. Housing FrameD. Housing Faceplate
Display StandE. Desktop “S” TubeF. Floor “Straight” TubeG. BaseplateH. Tube ConnectorI. End Tube Connector (x2)
ScrewsJ. Torx® Security Screws (x2)K. Tube Connector Set Screws (x16) (Already pre-inserted into parts)L. Base and Housing Connector Screws (x6)
AccessoriesM. Wall Mounting Bracket & ScrewsN. Torx® WrenchO. Hex Driver
VESA Mount ScrewsP. VESA Mount Screws (x4)
7What you’ll find in the case
A
E
F
G
H
I
J
M
K
N
L
O
P
B C D
8
Unpacking and Setting up your Armodilo(ex)™
Everything you need has been neatly packaged inside the case, please note the arrangement of all the parts as they will go back in the same location for future travel and storage.
Note: Check to ensure all the parts are included as per the ‘what’s included’ list on the previous page.
Caution: The baseplate is located on the second level of foam. Please ensure allother parts are removed from the first level before accessing the second level.
Unpacking and Setting up your Armodilo
9Unpacking and Setting up your Armodilo
I I H
E
G
J MK
N
L
O PA B C D
F
First Level
Second Level
10 Assembly Instructions › Floor Configuration
1. Remove the package of “Tools & Screws”2. IMPORTANT: Remove all the parts from the first level of foam and set them aside3. Remove the first level of foam. Remove the Baseplate (G) from the second level4. Grab an End Tube Connector (I)5. Holding the Baseplate (G) with the countersink facing up, place the End Tube
Connector (I) underneath the Baseplate (G), aligning the set screw holes. Take four Base and Housing Connector Screws (L) and thread them through the Base Plate into the Tube Connector. Using the Hex Driver (O) provided, fasten the bolts.
✔ ✖
5
4
Assembly Instructions › Floor Configuration
Running Cables: For assembly includingcabling please visit the online support section at www.armodilo.com and watch the how-to-videos.
11Assembly Instructions › Floor Configuration
6. Turn this whole part around so that the Baseplate (G) and End Tube Connector (I) are facing up. Set the Baseplate (G) on the floor or a sturdy work surface while assembling the rest of the display stand.
Important: DO NOT OVERTIGHTEN any of the bolts or screws. Damage can resultfrom excessive force on the bolts or set screws that hold the display stand together.
✔ ✖
✔ ✖
6
Flip over
12 Assembly Instructions › Floor Configuration
✔ ✖
7. Locate the Floor “Straight” Tube (F) and slide it onto the End Tube Connector (I). Align the set screw holes on the four sides. Using the Hex Driver (O) turn the already inserted set screws (x4) in the End Tube Connector (I) counter clockwise approximately two rotations to lock the End Tube Connector (I) into the Floor “Straight” Tube (F).
8. Locate the Tube Connector (H)9. Slide the Tube Connector (H) into the “Straight” Tube (F). Using the
Hex Driver (O) turn the already inserted set screws (x4) in the Tube Connector (H) counter clockwise approximately two rotations to lock the Tube Connector (H) into the Floor “Straight” Tube (F).
✔ ✖
✔ ✖
✔ ✖
7
9
8
Assembly Instructions › Floor Configuration
These four screws need to be turned
counter clockwise
These four screws need to be turned
counter clockwise
13Assembly Instructions › Floor Configuration
10. Locate the Desktop “S” Tube (E)11. Slide the Desktop “S” Tube (E) onto the Tube Connector (H).
Using the Hex Driver (O) turn the already inserted set screws (x4) in the Tube Connector (H) counter clockwise approximately two rotations to lock the Tube Connector (H) into the Desktop “S” Tube (E)
12. Locate the Kiosk Housing (A) that was set aside in step 2.13. Remove the Housing Faceplate (D) and Housing Frame (C) by
pulling them straight up from the Kiosk Housing (A). Remove the Tablet “Fit Kit” Inserts (B) and set these parts aside.
✔ ✖
1312
✔ ✖
10
11
✔ ✖
These four screws need to be turned
counter clockwise
14 Assembly Instructions › Floor Configuration
✔ ✖
14. Grab the remaining End Tube Connector (I) and align it to the back of the Kiosk Housing (A) as shown. Insert two Base and Housing Connector Screws (L) and tighten with the supplied Hex Driver (O)
15. Slide the Kiosk Housing (A) and attached End Tube Connector (I) onto the Desktop “S” Tube (E). At this point you can decide if you want to orient the housing in landscape or portrait mode. Using the Hex Driver (O) turn the already inserted set screws (x4) in the End Tube Connector (I) counter clockwise approximately two rotations to lock the End Tube Connector (I) into the Desktop “S” Tube (E)
✔ ✖
1514
✔ ✖
✔ ✖
15
Assembly Instructions › Floor Configuration
These four screws need to be turned
counter clockwise
15Assembly Instructions › Floor Configuration
16. Insert the Tablet “Fit Kit” Inserts (B) into the Kiosk Housing (A) paying attention to where the cutouts for the various buttons are located.
17. Insert your tablet device into the housing unit as shown.
Note: At this step, you’ll want to launch and setup your application. Once the next steps are completed, you will no longer have full access to your tablet device unless you undo steps 19 to 20.Note: If your device supports it, now is a good time to disable auto ‘power off’ or‘sleep’ mode so that the application runs continuously.
✔ ✖
16
✔ ✖
17
16 Assembly Instructions › Floor Configuration
✔ ✖
18. Insert the Housing Frame (C) and Housing Faceplate (D) 19. Secure the Housing Faceplate (D) to the Kiosk Housing (A) with two
Torx® Security Screws (J) provided using the Torx® Wrench (N) DO NOT OVERTIGHTEN THESE SCREWS
18
19
Assembly Instructions › Floor Configuration
Use the special Torx® driver
provided
17Assembly Instructions › Floor Configuration
ITEM NO.PART NUMBERDESCRIPTIONQTY.
1ARMO-BP-01 RHBASE PLATE R.H.1
2ARMO-BP-01 LHBASE PLATE L. H.13ARMO-CF-01CONNECTOR HOUSING24ARMO-FT-01FLOOR TUBE15ARMO-CT-01CONNECTOR TUBE16ARMO-TT-01TABLE TOP TUBE17ARMO-SS-015/16-18 SET SCREW168SCREW1/4-20 F.H.C.S.69ARMO-HO-01HOUSING110ARMO-FP-01FACE PLATE COVER111ARMO-SI-01SIDE INSERT212ARMO-CO-01FACE PLATE113ARMO-FPS-01FACE PLATE STUD214SET SCREW5/16-18 SET SCREW215ARMO-BSI-01BASE SUPPORT INSERT116ARMO-RG-01Ring1
20. Your Armodilo Display Stand is ready to showcase
20
18 Assembly Instructions › Desktop Configuration
1. Remove the package of “Tools & Screws”2. Remove all the parts from the first level of foam and set them aside3. Remove the first level of foam. Remove the Baseplate (G) from the second foam level4. Grab an End Tube Connector (I)5. Holding the Baseplate (G) with the countersink facing up, place the End Tube
Connector (I) underneath the Baseplate (G), aligning the set screw holes. Take four Base and Housing Connector Screws (L) and thread them through the Base Plate into the Tube Connector. Using the Hex Driver (O) provided, fasten the bolts
✔ ✖
5
4
Assembly Instructions › Desktop Configuration
19Assembly Instructions › Desktop Configuration
6. Turn this whole part around so that the base plate connector is facing up. Set the baseplates on the floor or a sturdy work surface while assembling the rest of the display stand.
Important: DO NOT OVERTIGHTEN any of the bolts or screws. Damage can resultfrom excessive force on the bolts or set screws that hold the display stand together.
✔ ✖
✔ ✖
6
Flip over
20 Assembly Instructions › Desktop Configuration
7. Locate the Desktop “S” Tube (E)8. Slide the Desktop “S” Tube (E) onto the End Tube Connector (I). Using the
Hex Driver (O) turn the already inserted set screws (x4) in the Tube Connector (H) counter clockwise approximately two rotations to lock the End Tube Connector (I) into the Desktop “S” Tube (E)
✔ ✖
7
8
Assembly Instructions › Desktop Configuration
These four screws need to be turned
counter clockwise
21Assembly Instructions › Desktop Configuration
9. Locate the Kiosk Housing (A) that was set aside in step 2.10. Remove the Housing Faceplate (D) and Housing Frame (C) by pulling them
straight up from the Kiosk Housing (A). Remove the Tablet “Fit Kit” Inserts (B) and set these parts aside.
✔ ✖
109
22 Assembly Instructions › Desktop Configuration
✔ ✖
11. Grab the remaining End Tube Connector (I) and align it to the back of the Kiosk Housing (A) as shown. Insert two Base and Housing Connector Screws (L) and tighten with the supplied Hex Driver (O)
12. Slide the Kiosk Housing (A) and attached End Tube Connector (I) onto the Desktop “S” Tube (E). At this point you can decide if you want to orient the housing in landscape or portrait mode. Using the Hex Driver (O) turn the already inserted set screws (x4) in the End Tube Connector (I) counter clockwise approximately two rotations to lock the End Tube Connector (I) into the Desktop “S” Tube (E)
✔ ✖
1211
✔ ✖
✔ ✖
Assembly Instructions › Desktop Configuration
These four screws need to be turned
counter clockwise
23Assembly Instructions › Desktop Configuration
13. Insert the Tablet “Fit Kit” Inserts (B) into the Kiosk Housing (A) paying attention to where the cutouts for the various buttons are located.
14. Insert your tablet device into the housing unit as shown.
Note: At this step, you’ll want to launch and setup your application. Once the next steps are completed, you will no longer have full access to your tablet device unless you undo steps 16 to 17.Note: If your device supports it, now is a good time to disable auto ‘power off’ or‘sleep’ mode so that the application runs continuously.
✔ ✖
13
✔ ✖
14
24 Assembly Instructions › Desktop Configuration
✔ ✖
15
16
Assembly Instructions › Desktop Configuration
Use the special Torx® driver
provided
15. Insert the Housing Frame (C) and Housing Faceplate (D) 16. Secure the Housing Faceplate (D) to the Kiosk Housing (A) with two
Torx® Security Screws (J) provided using the Torx® Wrench (N) DO NOT OVERTIGHTEN THESE SCREWS
25Assembly Instructions › Desktop Configuration
17. Your Armodilo Display Stand is ready to showcase
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 ARMO-BP-01 RH BASE PLATE R.H. 1
2 ARMO-BP-01 LH BASE PLATE L. H. 13 ARMO-CF-01 CONNECTOR HOUSING 24 ARMO-FT-01 FLOOR TUBE 15 ARMO-CT-01 CONNECTOR TUBE 16 ARMO-TT-01 TABLE TOP TUBE 17 ARMO-SS-01 5/16-18 SET SCREW 168 SCREW 1/4-20 F.H.C.S. 69 ARMO-HO-01 HOUSING 110 ARMO-FP-01 FACE PLATE COVER 111 ARMO-SI-01 SIDE INSERT 212 ARMO-CO-01 FACE PLATE 113 ARMO-FPS-01 FACE PLATE STUD 214 SET SCREW 5/16-18 SET SCREW 215 ARMO-BSI-01 BASE SUPPORT INSERT 116 ARMO-RG-01 Ring 1
17
26 Assembly Instructions › Wall Mounting
There are two ways to fasten your Armodilo Kiosk Housing to a wall1. Locate the Kiosk Housing (A) 2. Remove the Housing Faceplate (D) and Housing Frame (C) by pulling them
straight up from the Kiosk Housing (A). Remove the Tablet “Fit Kit” Inserts (B) and set these parts aside.
Assembly Instructions › Wall Mounting
✔ ✖
21
✔ ✖
27Assembly Instructions › Wall Mounting
Option #1: Using the “S” Tube1. Grab a End Tube Connector (I) and align it to the back of the Kiosk Housing (A)
as shown. Insert two Base and Housing Connector Screws (L) and tighten with the supplied Hex Driver (O)
2. Slide the Kiosk Housing (A) and attached End Tube Connector (I) onto the Desktop “S” Tube (E). At this point you can decide if you want to orient the housing in landscape or portrait mode. Using the Hex Driver (O) turn the already inserted set screws (x4) in the End Tube Connector (I) counter clockwise approximately two rotations to lock the End Tube Connector (I) into the Desktop “S” Tube (E)
✔ ✖
✔ ✖
1312
✔ ✖
These four screws need to be turned
counter clockwise
28 Assembly Instructions › Wall Mounting
3. Locate the Wall Mount Bracket (P)4. Find a End Tube Connector (I) and place it on the front of the Wall Mount
Bracket, aligning the two mounting holes.5. Use two Base and Housing Connector Screws (L) to fasten the End Tube
Connector (I) to the Wall Mount Bracket (P) using the suppled Hex Driver (O)6. Fasten the Wall Mount Bracket (P) to the wall using the supplied
Wall Mount Screws (Q)
Assembly Instructions › Wall Mounting
✔ ✖
✔ ✖
4
3
5
6
6
29Assembly Instructions › Wall Mounting
7. Slide the Kiosk Housing (A) and attached Desktop “S” Tube (E) onto the Wall Mount Bracket (P). Using the Hex Driver (O) turn the already inserted set screws (x4) in the End Tube Connector (I) counter clockwise approximately two rotations to lock the End Tube Connector (I) into the Desktop “S” Tube (E).
8. Go to page (29) to install your tablet device.
✔ ✖
✔ ✖
7
These four screws need to be turned
counter clockwise
Optional: It is also possible to mount theKiosk Housing (A) closer to the wall by attaching the Housing directly to theEnd Tube Connector (I) as shown.
30 Assembly Instructions › Wall Mounting
IMPORTANT: Only use the supplied VESA mounting screws orscrews of this length to ensure screws do notcome into the housingunit and damage thetablet device.
Option #2: Using a VESA mount bracket1. Mount the 75mm VESA mount bracket to the Kiosk Housing (A) using the
mounting holes located on the back of the housing unit.2. Follow the instructions in the VESA mount product manual to finish installation.3. Go to page (29) to install your tablet device.
1
✔ ✖
Assembly Instructions › Wall Mounting
31Assembly Instructions › Wall Mounting
Adding the tablet (Both Options)1. Insert the Tablet “Fit Kit” Inserts (B) into the Kiosk Housing (A) paying attention
to where the cutouts for the various buttons are located.2. Insert your tablet device into the housing unit as shown. At this step, you’ll want
to setup your application to run since once the next steps are done, you will no longer have full access to your tablet device unless you undo steps 3 to 4.
✔ ✖
1
✔ ✖
2
32 Assembly Instructions › Wall Mounting
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 ARMO-BP-01 RH BASE PLATE R.H. 1
2 ARMO-BP-01 LH BASE PLATE L. H. 13 ARMO-CF-01 CONNECTOR HOUSING 24 ARMO-FT-01 FLOOR TUBE 15 ARMO-CT-01 CONNECTOR TUBE 16 ARMO-TT-01 TABLE TOP TUBE 17 ARMO-SS-01 5/16-18 SET SCREW 168 SCREW 1/4-20 F.H.C.S. 69 ARMO-HO-01 HOUSING 1
10 ARMO-FP-01 FACE PLATE COVER 111 ARMO-SI-01 SIDE INSERT 212 ARMO-CO-01 FACE PLATE 113 ARMO-FPS-01 FACE PLATE STUD 214 SET SCREW 5/16-18 SET SCREW 215 ARMO-BSI-01 BASE SUPPORT INSERT 116 ARMO-RG-01 Ring 1
3. Insert the Housing Frame (C) and Housing Faceplate (D) 4. Secure the Housing Faceplate (D) to the Kiosk Housing (A) with two
Torx® Security Screws (J) provided using the Torx® Wrench (M) DO NOT OVERTIGHTEN THESE BOLTS
✔ ✖
3
4
Use the special Torx® driver
provided
Assembly Instructions › Wall Mounting
33Assembly Instructions › Wall Mounting
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 ARMO-BP-01 RH BASE PLATE R.H. 1
2 ARMO-BP-01 LH BASE PLATE L. H. 13 ARMO-CF-01 CONNECTOR HOUSING 24 ARMO-FT-01 FLOOR TUBE 15 ARMO-CT-01 CONNECTOR TUBE 16 ARMO-TT-01 TABLE TOP TUBE 17 ARMO-SS-01 5/16-18 SET SCREW 168 SCREW 1/4-20 F.H.C.S. 69 ARMO-HO-01 HOUSING 1
10 ARMO-FP-01 FACE PLATE COVER 111 ARMO-SI-01 SIDE INSERT 212 ARMO-CO-01 FACE PLATE 113 ARMO-FPS-01 FACE PLATE STUD 214 SET SCREW 5/16-18 SET SCREW 215 ARMO-BSI-01 BASE SUPPORT INSERT 116 ARMO-RG-01 Ring 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 ARMO-BP-01 RH BASE PLATE R.H. 1
2 ARMO-BP-01 LH BASE PLATE L. H. 13 ARMO-CF-01 CONNECTOR HOUSING 24 ARMO-FT-01 FLOOR TUBE 15 ARMO-CT-01 CONNECTOR TUBE 16 ARMO-TT-01 TABLE TOP TUBE 17 ARMO-SS-01 5/16-18 SET SCREW 168 SCREW 1/4-20 F.H.C.S. 69 ARMO-HO-01 HOUSING 1
10 ARMO-FP-01 FACE PLATE COVER 111 ARMO-SI-01 SIDE INSERT 212 ARMO-CO-01 FACE PLATE 113 ARMO-FPS-01 FACE PLATE STUD 214 SET SCREW 5/16-18 SET SCREW 215 ARMO-BSI-01 BASE SUPPORT INSERT 116 ARMO-RG-01 Ring 1
5
5. Your Armodilo Display Stand is ready to showcase
34
Additional Safety MountingIn cases where your Armodilo™ Display Stand will be used in high traffic areas or when unsupervised for shorter periods of time, we recommend mounting the display stand to either the floor or display surface via the optional mounting holes located in the baseplate of the display stand.
1. Locate the two mounting holes in the back of the baseplates. Insert two screws (not provided) through the baseplate holes into the floor or display surface as required
1
Additional Safety Mounting
35
Kensington Security SlotA Kensington Security Slot can be found on all Armodilo Display Stands at the bottom of the “S” tube. A Universal Computer Security Cable can be attached to this slot to add an extra theft deterrent in instance when your display stand might be left unattended for short periods of time. Simply follow the instructions found in the Universal Computer Security Cable manual.
Add a Universal Computer Security Cable to the
Kensington Security Slot
Kensington Security Slot
36
Taking Care of Your Armodilo™
Your Armodilo Display Stand has been designed to be relatively maintenance free. As with anything a little tender loving care will go a long way to ensuring your Armodilo Display Stand lasts for years to come and will provide you with endless hours of showcasing prowess.
UsageYour Armodilo Display Stand was designed to exhibit tablet devices in a variety of environments including: trade shows, exhibits and retail environments. The display stand was designed to be used indoors in dry conditions. Outdoor usage is not recommended as the unit will not provide any protection from elements such as rain, snow, sleet or hail for your tablet device.
AssemblyWhen assembling and disassembling your display stand always ensure that all parts align properly before securing or attaching the supplied screws. Improper threading or over tightening of any of the screws could result in premature thread or part wear which is not covered under the warranty.
CleaningYour display stand is anodized and power-coated to give it one of the most durable finishes available. Armodilo’s finish will stand up to a lot but occasionally you’ll want to wipe down your display stand to give it that ‘good as new’ look. When cleaning your display stand always use a damp lint free cloth. Do not use any cleaning agents since they could harm the finish.
Taking Care of Your Armodilo
37
StorageFor extended storage it is recommended that you disassemble the unit and fit it back into the optional carrying case or supplied foam insert. Please keep in a cool dry place for extended storage, do not expose the unit to extended heat sources, sunlight, damp or wet conditions or harsh environments.
ShippingArmodilo was built to travel. The optional carrying case provides perfect mobility for your display stand. During shipping the case will eventually suffer surface damage including dents and scratches. If you want to prevent this you can always reuse the cardboard box Armodilo was shipped in additional protection during shipping.
Note: Please do not leave your tablet device in the Armodilo head unit during shipping. Damage could result to the tablet device.
Taking Care of Your Armodilo
38
Ordering Upgrades or Replacement PartsArmodilo™ was designed to be extremely versatile and we’re constantly finding new ways to enhance your showcasing experience.
UpgradesWe’ll be offering a variety of upgrades for your Armodilo. For the most current selection of accessories, please check the website at www.armodilo.com or contact your reseller for more information.
Additional Tablet Fit-Kits™Tablet Fit-Kits are available for a variety of popular tablet devices. We’ll be providing new Tablet Fit-Kits as new tablets become available and we also provide custom Tablet Fit-Kits for specialty tablet devices, simply contact us for specifications and pricing.
Replacement PartsAlthough your Armodilo was designed to last for years to come, if a part ever becomes worn or you happen to lose it, contact us for replacements and pricing.
Ordering Upgrades or Replacement Parts
39
Warranty InformationArmodilo™ Display Solutions warrants your product to be free from physical defects in materials and workmanship for a period of 3 years from the date of the original purchase. If you discover a defect covered by this warranty we will repair or replace the part at our discretion using new or refurbished components.
Product failures not covered by this warranty: This warranty covers defects in manufacturing that arise from the correct use of the device. It is limited to defects in materials or workmanship and does not cover damage caused by abuse, misuse, unauthorized modification, lightning or power surge, extreme heat or cold, and corrosive environments. The warranty also DOES NOT COVER the normal wear and tear on faceplates, frames, tablet inserts, housing, connectors, screws, bolts, cases, tools, accessories and all paint/finishes.
Limits of Liability: If these products fail or do not perform as warranted your sole recourse shall be to repair the product as described above. We will not be liable to you or anyone else for damages that result from the failure of this product. These damages include but are not limited to the following; lost profits, lost savings, lost data, damage to other equipment and incidental or consequential damages arising from the use of or inability to use this product. Express or implied warranties are disclaimed. IN NO EVENT WILL ARMODILO DISPLAY SOLUTIONS BE LIABLE FOR MORE THAN THE AMOUNT OF YOUR PURCHASE PRICE, NOT TO EXCEED THE CURRENT LIST PRICE OF THE PRODUCT. Armodilo Display Solutions specifically disclaims all other warranties, expressed or implied, and the user shall deem the installation or use of this product an acceptance of these terms.
Warranty Information
40
Obtaining Service Under WarrantyHow to obtain service under this warranty: RMA numbers are required for all product returns by contacting [email protected]. Once an Armodilo Display Solutions technical support member verifies your have a hardware problem that requires you to return your product you will be issued an RMA number.
You must acquire an RMA number and deliver the defective part to Armodilo Display Solutions in order to obtain service under this warranty. A sales receipt is required to verify the original retail purchase. All returned parts must have the RMA number visible on the outside of the packaging. You must either use the original packaging or pack the unit securely to avoid damage during shipping. Return Authorizations are valid for 30 days after the RMA number is issued.
Ship your product to the following address:
Armodilo Display Solutions RMA#:XXXX 27 Coral Gables Crescent Elmira, ON N3B3P4 Canada
Armodilo Display Solutions will pay the return shipping costs for products under warranty. Armodilo Display Solutions is not responsible for the cost of shipping to Armodilo Display Solutions or the payment of any customs clearance fees or duties.
Obtaining Service Under Warranty
41
Important Safety InformationTo operate Armodilo safely and reduce the possibility of injury or damage associated with improper usage, follow these guidelines:
› Always setup your Armodilo Display Stand on a level and stable floor or surface
› This product is used to present information via tablet devices and is not meant to protect the tablet from any type of damage resulting from falls, bumps, blows or any other physical impact whether accidental or intentional
› Even though the display stand has been designed to be sturdy, reasonable precautions should be taken to ensure the display stand does not get bumped, knocked or pushed during usage
› Whenever the display stand will be used in high traffic areas or when unsupervised, the use of mounting screws into the floor or display surface via the base plates is highly recommended (see page # 32 for mounting instructions)
› Only use tablet devices as indicated on the Tablet Fit-Kit™ that are provided or ordered as aftermarket parts from Armodilo
› This product is recommended for indoor use only. Although the product is designed to be able to handle various environments and elements, the tablet devices that it encloses are not and can be damaged via elements such as rain, snow, sleet, ice or severe temperature changes
› Always ensure the display stand is properly assembled prior to use. All screws should be fastened securely based on assembly instructions provided. Never use the display stand without first properly assembling the unit
› Always be careful when taking your tablet back out of the kiosk, ensuring it does not fall
Important Safety Information
42
General Precautions StabilityThe Armodilo™ Display Stand has been designed to provide maximum versatility and convenience for displaying tablet devices in non-traditional settings. Although the display stand has been designed to be stable and difficult to knock over, Armodilo Display Solutions accepts no liability from losses or injury resulting from the display stand being knocked over or falling due to improper usage, rough handling or improper setup, whether accidental or deliberate.
Note: Surface mounting holes have been provided in the baseplates for situationswhere the unit may be unsupervised for short periods of time or when higher traffic situations arise. Although mounting the display stand will increase overall stability it does not guarantee that the unit cannot be overturned.
Temporary Exhibiting The Armodilo Display Stand is intended to be a temporary exhibit tablet display stand and is not recommended for extended exhibiting usage. Supervision of the display stand and the enclosed tablet device is always highly recommended.
Theft & TamperingAlthough the Armodilo Display Stand has been designed to deter theft and tampering in various exhibiting situations it is not guaranteed to do so. Armodilo Display Solutions accepts no liability from losses due to theft, tampering or other mishandling, whether accidental or deliberate. It is up to the owner of the display stand to ensure proper supervision of the product and tablet device.
General Precautions
43
Copyright © 2012 Armodilo Display Solutions, a division of Bonzai Design Group Inc.
Under copyright laws, this manual may not be copied in whole or in part, without the written consent of Armodilo Display Solutions.
Every effort has been made to ensure that the information in this manual is accurate. Armodilo Display Solutions is not responsible for printing or clerical errors.
Armodilo Display Solutions 27 Coral Gables Crescent Elmira ON N3P3P4 www.armodilo.com
The Armodilo logo is a trademark of Armodilo Display Solutions.
Other company and product names mentioned herein are trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation.
Copyright
44