Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
User Manual
Digicom Magic 7000
Multi-screen Processor
V1.4
VTRON
http :// www.vtron.com
E-Mail: info @ vtron.com
All rights reserved
User Manual Digicom Magic 7000 Multi-Screen Processor
-i-
This manual is the copyright property of VTRON. Without a prior written approval from VTRON,
no part of the text or graphics in this manual shall be copied or distributed to any party in any
manner.
This manual is subject to change for technical upgrade without any prior notice.
Digicom and VTRON are the registered trademarks of VTRON.
Windows is trademarks or registered trademark of Microsoft in the United States and/or other
countries (regions). The product names or company names mentioned in this manual may be the
trademarks of their respective owners.
Note Materials in this manual are for introduction of VTRON’s Digicom Magic 7000 desktop application processor only. Product specifications, configurations and functions shall be in accordance with the purchase contracts signed with a customer. The functions and interface of the product you ordered might differ from those in this manual. This is due to the difference in configuration between the one you purchase and the one introduced in this manual.
Statement Products as introduced in this manual are Class A products that may cause radio interferences in living condition. Practical measures should be taken when necessary.
User Manual Digicom Magic 7000 Multi-Screen Processor
-ii-
Please read carefully and make sure to comply with the following terms and conditions before
operating VTRON Digicom Magic 7000 multi-screen processor.
Ensure proper grounding (grounded as indicated in the figure)
This product must be properly grounded to avoid dangers to
personal safety or any other harmful effects. Improper grounding
may cause severe system failure, unstable or unreliable system
operation, or even unrecoverable breakdown of the equipment.
Prohibit the illegal change to the original design
Any adding or deletion to any mechanical part or electric circuit
of this product is prohibited. Otherwise, VTRON will not assume
any liability for the results thus caused.
Prohibit the illegal installation of software
VTRON Digicom multi-screen processor is a dedicated image
controller and shall not be used for any other purpose. The
customer shall consult VTRON or the designated agent for the
installation of their own software. Otherwise VTRON will not
assume any liability for the results thus caused.
Be sure to cut off the power supply
Be sure to cut off the system power before conducting the
following operations.
A. Removal or reinstallation of any parts of the product
(except for the hot-pluggable parts)
B. Disconnection or reconnection of any electric connector
or other connectors of this product
Safety Cautions !
Grounding wire (connect to ground)
●
User Manual Digicom Magic 7000 Multi-Screen Processor
-iii-
Keep away from corrosive chemical gas or agent
Corrosive chemical gas or agent will damage the mechanical parts
and electric circuits of the products and directly affect its service
life. Avoid cleaning the appearance and inside of the product with
highly volatile solvent, such as gasoline, thinner, acetone, etc.
Keep away from inflammable and explosive materials
The product safety and personal safety cannot be ensured in the
environment with inflammable and explosive materials.
Keep away from equipment with strong electromagnetic
interference
The performance and stability of this product will be affected in
the environment with strong electromagnetic interference.
Disconnecting device of grid power
This equipment uses coupler or power connector as the
disconnecting device. Please ensure that the connector or coupler
is easily accessible, so that it can be used to disconnect the grid
power at dangerous time.
Note:
A. The equipment adopts replaceable battery of designated
specifications. Installation of improper battery may
cause explosion. Be sure to replace the battery with the
standard battery accessory provided by VTRON.
B. Be sure to dispose of the used battery according to the
instructions. Please consult the local environment
protection department for the disposal method of the
used battery.
User Manual Digicom Magic 7000 Multi-Screen Processor
-iv-
Contents
1 Overview ........................................................................................................................................... 1
1.1 Features ................................................................................................................................... 2
1.2 Application diagram of Magic 7000 processor in the system ................................................. 3
2 Basic Configurations and Appearance Introduction .................................................................... 4
2.1 Basic Configurations of the System ........................................................................................ 4
2.2 Introduction for Front and Rear Panel Introduction ................................................................ 5
3. VDC software .................................................................................................................................. 8
3.1 Install and Uninstall ................................................................................................................ 8
3.2 Software operation ................................................................................................................ 11
4 Hardware Installation ................................................................................................................... 16
4.1 Chassis Installation ................................................................................................................ 17
4.2 Connection to User Network ................................................................................................. 18
4.3 System Grounding ................................................................................................................. 18
4.4 Startup and Operation ............................................................................................................ 19
5. Daily Maintenance ........................................................................................................................ 20
5.1 Environment and Cleaning .................................................................................................... 20
5.2 Routine Inspection ................................................................................................................. 21
5.3 Troubleshooting .................................................................................................................... 22
6. Glossary ......................................................................................................................................... 26
7. Contact us ...................................................................................................................................... 27
User Manual Digicom Magic 7000 Multi-Screen Processor
-1-
1 Overview
Digicom Magic 7000 multi-screen processor is a 3D processor with extensive applications,
powerful functions and excellent price performance ratio developed, designed and produced by
VTRON. It is used for High Resolution Video Wall System and runs on Windows operating
system to process and output 3D application image, and reliably provide a 3D image display
environment with large screen and high resolution.
VTRON is a well-known international high-tech enterprise engaged in the R&D, production,
sales and services of visual information exchange solution. It boasts patented products,
advanced system technologies, rich system application experiences and rich engineering
experiences in the central display field and provides true local services.
After years of development, VTRON has developed many international and domestic patented
and world leading technologies, with independent intellectual property rights over the
complete series of products. Its products have been extensively used in many fields and
exported to numerous countries and regions. (For more information about our latest products,
applications and cases, please visit our website: http://www. vtron. com.)
User Manual Digicom Magic 7000 Multi-Screen Processor
-2-
1.1 Features
The Digicom Magic 7000 multi-screen processor is a 3D multi-screen processor with extensive
applications, powerful functions and excellent price performance ratio with the resolution of
16k×16k. It runs on Windows operating system and offers a large screen and high resolution
Windows image display environment.
Features:
Hardware decoding and 3D function
Digicom Magic 7000 multi-screen processor is integrated with high-performance GPU to
satisfy the requirement of 3D applications on the system processing speed. And the multi-
channel applications running on the processor can be output and displayed continuously on the
screen with real-time and synchronization. The professional graphics card specifically
designed and developed for multi-screen processor supports DirectX 11.0, OpenGL 4.1 and
the OpenCL 3D APIs efficient application. Single slot solution endows the processor with an
amazing workstation-class performance and unmatched multi-screen display function, which
provides users with the most realistic graphics, computing, and visual viewing experience,
such as CAD applications, 3D digital video applications, 3D graphics display, and virtual
simulation applications. And the processor also brings user a superior processing ability on
hardware acceleration, performance and mapping quality.
Generation of high resolution uniform logic screen
Digicom Magic 7000 multi-screen processor supports 3D applications working on
WINDOWS desktop. After the processing of the professional image combination
processor(can be used alone, or used together with ARK3100SP/ARK3200SP processors
designed by VTRON), all these desktop signals are combined to generate a high resolution
logic screen which can be displayed on the display wall.
Color depth
The color depth of the system includes 16bits, 24bits and 32bits, which not only satisfies the
User Manual Digicom Magic 7000 Multi-Screen Processor
-3-
ordinary color requirements, but also supports true color applications.
Network function
It supports Ethernet interface as well as TCP/IP and other common network protocols.
Comprehensive signal processing and display capabilities
This product, together with Visionpro display cube, is comprised of the display wall system,
and combined with Ark3100SP/Ark3200SP processor designed by VTRON, can realize 3D
applications running on the whole display wall, and at the same time meet the full real-time
display for the rapid expansion and access of the signals, so as to meet the requirement of
comprehensive signal processing in display wall system area.
1.2 Application diagram of Magic 7000 processor in the system
User Manual Digicom Magic 7000 Multi-Screen Processor
-4-
2 Basic Configurations and Appearance Introduction
2.1 Basic Configurations of the System
Item Model/version
CPU Intel XEON 4-core CPU
Motherboard Supporting 2 groups of PCIE 2.0 x 16 or above slots
Image card NVIDIA Quadro series image card
Memory ECC; 4GB×2
HD 1TB×2 (SATA) HD, supporting disk redundancy array (RADI 0 /1)
Mouse PS/2 port
Keyboard PS/2 port
Optical drive DVD optical drive
NIC 1000M; RJ45×2
Power supply Redundancy power
100-240V AC 50/60Hz 4-2A
Rated power ≤300W
Operating environment Temperature: 0-40℃
Operating environment Relative humidity: 20%-80% (no condensing)
Installation 19" standard rack mounting, height: 4U
Dimensions W × H×D= 445mm×177.5mm×600mm
Weight <30Kg
Operating system Windows
Note:
Any changes to the parameters due to technical modification will be made without any prior
notice.
User Manual Digicom Magic 7000 Multi-Screen Processor
-5-
2.2 Introduction for Front and Rear Panel Introduction
The Digicom Magic 7000 multi-screen processor adopts IPC 4U industrial motherboard
chassis. The motherboard supports full series of server motherboard, ATX motherboard and
full series of full-length board. The base board supports 7-slot server motherboard.
NOTE:
Signal output cable cannot be pulled out or inserted when the processor is working with
power.
The figure below is for reference only. The specific configuration shall be in accordance
with the customer order.
2.2.1 OLD version of 7000 processor
Front panel: There are 2 USB ports, 1 power switch, 1 reset switch, 1 CD-ROM position, 2
pull-out HDD positions, as shown in the following figure:
USB port
Pull-out
HDD
CD-ROM
User Manual Digicom Magic 7000 Multi-Screen Processor
-6-
Rear panel:
There are 7 slots for signal output (only 1 is used in the following configuration), redundancy
power and peripheral interfaces.
2.2.2 Upgraded 7000 processor
Front panel:
The following figure shows the main appearance of the front panel. There are two handles, one
power status indicator, one monitor display, one state indicator, and three function keys.
Signal output
Redundancy
power
Peripheral interface
Power status indicator
Monitor display
Handle
Status indicator
Function key
User Manual Digicom Magic 7000 Multi-Screen Processor
-7-
The following table describes the indicators and function keys.
Indicator/key Function
STU indicator Status indicator; green: normal state; red: abnormal state.
ALC key Alarm clearance
TAB key Page switching
RST key System reset
Rear panel:
There are 7 slots for signal output (only 1 is used in the following configuration), redundancy power and
peripheral interfaces
Redundancy
power Signal output
Peripheral interface
User Manual Digicom Magic 7000 Multi-Screen Processor
-8-
3. VDC software
VDC software, the configuration software designed for Magic7000 processor, uses
visualization interface to show the configuration results, which is convenient for the user to set
the output of each card, modify or expand the VDC software.
Working principle: After starting, VDC software can automatically load the mode profile,
and based on the model of current graphics card model and the value of Row, Col and
UnitResolution selected by the user, the appropriate mode in the profile will be matched out
and can be previewed through VDC interface through which user also can modify the
parameters, and at last, the mode can be saved as configuration file for the graphics card.
3.1 Install and Uninstall
Install process:Double-click the install file inside the package,and
then start the installation as following .
User Manual Digicom Magic 7000 Multi-Screen Processor
-9-
1. Choose Install
Location
2、Click to
install
User Manual Digicom Magic 7000 Multi-Screen Processor
-10-
Uninstall : Click Program→VTRON→VDC→Uninstall ( for instance ) or delete the
program from control panel,and then continue as following:
User Manual Digicom Magic 7000 Multi-Screen Processor
-11-
3.2 Software operation
Main interface of the software:
The details for the software operation will be described in the following sections.
3.2.1 Menu
A、Control
ShowLastConfig
Use this menu to show the last configuration file, and also this file has been set as the default
one when the program starts.
User Manual Digicom Magic 7000 Multi-Screen Processor
-12-
Restore
If current configuration is invalid,or for some reason, user wants to restore configuration to
previous one, this menu can be used at this time. There two menu options: “To Initial Config”
is used to restore to the initial configuration, generally the initial one adopts clone output mode;
and another one, “To Last Config” is used to restore to last configuration mode.
Exit
Click “Exit” to exit VDC software.
B、View
Toolbar
This menu is used to show or hide the Toolbar: Check is to show Toolbar, otherwise to hide.
VideoCard
This menu is used to show or hide the marked information (Card?:Port?)of VideoCard:
Check is to show the information, otherwise to hide.
C、Options
Language
This menu can be used to change the language between Chinese and the English.
Note: User should restart the software to make the change effect.
User Manual Digicom Magic 7000 Multi-Screen Processor
-13-
Change fontsize
This menu can be used to Increase fontsize or Decrease fontsize with real-time.
D、Help
Open Help menu to view the help manual and software version information.
3.2.2 Configuration instructions
A. Wall configuration for signal output
In the following interface, user can choose the value of row, col and UnitResolution.
B. Select Mode
If the value of row, col and Unitresolution has been selected successfully, the current preset
modes will be listed in the Mode list (see below). If the Desktop Interface mode has been
selected, the corresponding output signal will be desktop signal coming from Digicom
ARK3100SP/ARK3200SP processor; if Acquisition Interface mode has been selected, the
corresponding output signal will be Dual_link DP or Dual-link DVI; and if there was no
preset mode, output signal could be customized by user.
C. View and modify the configuration details of the VideoCard for the selected mode
When a mode has been selected, the current configuration will be listed at the left side of the
software, which can be modified by the user according to the requirements.
User Manual Digicom Magic 7000 Multi-Screen Processor
-14-
Switch Ports:
1、Right-click the mouse on the VideoCard config detail area inside the software interface.
2、User can switch the configuration details between two different ports in the following
dialog box.
User Manual Digicom Magic 7000 Multi-Screen Processor
-15-
D. Preview
Click the "Preview" button to display the schematic diagram of the output effect. As shown
below, the output area of each VideoCard port is labeled inside a red box where the text to
indicate a specific card number and port number has been displayed. One dotted line box of
the background area (blue or green) corresponds to one display cube of the wall.
E. Save
If no problem was found after the configuration details being previewed, click “Save” to save
the new configuration into the system.
F. Drag and drop operation
In “Preview area”, user can switch the configuration of two ports by the drag and drop
operation, method: left-click on window area inside the red box to select it firstly, and then
move the mouse, at last release the mouse to the new window location.
Preview area
User Manual Digicom Magic 7000 Multi-Screen Processor
-16-
4 Hardware Installation
Note: The system installation must be carried out by the trained and qualified technicians.
The Digicom Magic 7000 multi-screen processor is delivered to the customer as a complete
unit. The hardware resources have been installed in accordance with the installation process
and subject to high-temperature and aging tests in the factory. You only need to connect the
processor and the external equipment onsite.
Please check the items according to the shipping list upon unpacking. In case of any loss or
damage, call the supplier immediately. The shipping list is in the packing box.
User Manual Digicom Magic 7000 Multi-Screen Processor
-17-
4.1 Chassis Installation
The Digicom Magic 7000 multi-screen processor adopts standard industrial control chassis
and modular design, which is convenient for the installation of the processor into standard
cabinet in certain applications.
The Digicom Magic 7000 multi-screen processor can be installed on the special mounting rack
near the display wall or installed in the special cabinet. However, when installing the multi-
screen processor in the cabinet, proper ventilation and heat dissipation in the cabinet shall be
ensured. Although the processor has strong heat dissipation capacity, if the hot air in the
cabinet is not circulated, the ambient temperature will be increased gradually, and the
performance and service life of the equipment will be affected.
The power socket of the Digicom Magic 7000 multi-screen processor is located on the left
bottom of the rear panel. When connecting the equipment power socket and the 220V
plugboard, please use the cable delivered together with the equipment. Incompliant power
cable will affect the power supply and the performance stability of the equipment. In addition,
to ensure the stability of the power supply to the multi-screen processor, the processor power
socket must be connected to independent power plugboard. Do not share power plugboard
with other equipment.
User Manual Digicom Magic 7000 Multi-Screen Processor
-18-
4.2 Connection to User Network
The Digicom Magic 7000 multi-screen processor can operate in the network. However, in
actual application, you need to connect the processor to the network via NETWORK SWITCH.
On the rear panels of the multi-screen processor, there are 2 special network ports for the
connection of the equipment to the network via NETWORK SWITCH.
4.3 System Grounding
To ensure the equipment safety and reliability as well as operator’s safety, the equipment must
be properly grounded. That is, the grounding terminal must be connected to the special
grounding system through special grounding conductor and according to proper method.
Note: To ensure safe and normal operation, the electric grounding of electronic product is
mandatory. Improper grounding will severely affect the reliability and stability of the system
operation and affects the signal quality. Therefore, when installing the Digicom Magic 7000
multi-screen processor, the grounding of the system shall also be considered, including
whether the power system has grounding (e.g., using the certified Yanxin power cable and
socket). In addition, when installing the Digicom Magic 7000 multi-screen processor in high-
rise building, the equipment needs to be connected to the ground through special safe
grounding system and kept away from the lightning grounding system of the building.
Improper system grounding will greatly affect the equipment signal transfer, causing
irremovable interference to the image. For more information, please consult VTRON. Make
sure that you strictly comply with the relevant regulations and maintain proper grounding
when using the equipment.
User Manual Digicom Magic 7000 Multi-Screen Processor
-19-
4.4 Startup and Operation
4.4.1 Normal Operation
Open the lower cover of the front panel and press the power button, the Digicom Magic 7000
multi-screen processor will automatically enter the Windows operating system after startup
and logon, and then display the Digicom desktop on the display wall.
The Digicom Magic 7000 multi-screen processor is based on Windows operating system.
Therefore, its startup interface shall be consistent with that of the corresponding Windows
operating system. In case of any difference, it may be caused by the difference of the desktop
items with your current task and desktop planning. Besides, when the task is changed, the
desktop may have corresponding change.
4.4.2 System Shutdown
The method for shutting down the multi-screen processor is as follows:
(1) Stop all the programs, and exit the system.
(2) Disconnect the power switch of the processor after that.
User Manual Digicom Magic 7000 Multi-Screen Processor
-20-
5. Daily Maintenance
5.1 Environment and Cleaning
Note: The equipment does not need any internal adjustment, nor is there any user serviceable
part in the equipment. To replace any part or repair the equipment, please contact the local
authorized service center. We are happy to provide timely service and troubleshooting for you.
Daily inspection and maintenance
1) The operating environment shall be dry, free of dust and have good ventilation.
2) Operating temperature: 0℃ - 40℃, Relative humidity: 20% - 80%, no condensing
3) Clean the equipment appearance frequently, but avoid using any rough or abrasive
cleaning agent.
4) Avoid placing any sundry in or above the ventilation hole and ventilation duct. Pay
special attention not to spray any liquid or chemicals on or near the equipment.
Equipment cleaning
1) Disconnect the power socket before cleaning the equipment.
2) When cleaning the inside and outside of the equipment, avoid using liquid or spray
cleaning agent.
3) Avoid using any corrosive solution (e.g. chemical thinner, acetone, gasoline or other
abrasive cleaning agent) which will damage the equipment appearance.
User Manual Digicom Magic 7000 Multi-Screen Processor
-21-
5.2 Routine Inspection
1) Monthly check if the system grounding is proper.
2) Monthly check if the connecting wires and power cables are broken or worn out, and if
the connectors and plug-ins are loose, rusted and oxidized.
3) Run the system for one to two hours each week when it is not frequently used. The
frequency shall be over once a day in damp seasons.
User Manual Digicom Magic 7000 Multi-Screen Processor
-22-
5.3 Troubleshooting
No response when powered up
Start and check
Tro
uble
shooting
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
NoIf the power cable
at the back of the processor
is loosened
Connect the power cable properly
Normal operation or not?
Normal operation or not?
If the power module at the back
of the processor has poor contact
Connect the power module properly
Normal operation or not?
Switch the corresponding power
module to other position
Normal operation or not?
Contact the manufacturer or agent
Start and check
Tro
uble
shooting
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
NoIf the power cable
at the back of the processor
is loosened
Connect the power cable properly
Normal operation or not?
Normal operation or not?
If the power module at the back
of the processor has poor contact
Connect the power module properly
Normal operation or not?
Switch the corresponding power
module to other position
Normal operation or not?
Contact the manufacturer or agent
User Manual Digicom Magic 7000 Multi-Screen Processor
-23-
Network communication fails to work normally
网线是否正确连接?
联系厂家或代理商
网络设置是否正确?
否
否
是
开始检查
故
障
排
除
是
是否正常工作?
否
是
正确连接网线
重新正确设置网络
是否正常工作?
否
是
Start and check
If the network cable is properly connected
Connect the network cable properl
Normal operation or not?
If the network setting is proper
Contact the manufacturer or agent
Normal operation or not?
Reset the network properly Tro
uble
shooting
Yes
Yes
Yes
Yes
No
No
No
No
网线是否正确连接?
联系厂家或代理商
网络设置是否正确?
否
否
是
开始检查
故
障
排
除
是
是否正常工作?
否
是
正确连接网线
重新正确设置网络
是否正常工作?
否
是
Start and check
If the network cable is properly connected
Connect the network cable properl
Normal operation or not?
If the network setting is proper
Contact the manufacturer or agent
Normal operation or not?
Reset the network properly Tro
uble
shooting
Yes
Yes
Yes
Yes
No
No
No
No
User Manual Digicom Magic 7000 Multi-Screen Processor
-24-
(1) Keyboard operation fails
User Manual Digicom Magic 7000 Multi-Screen Processor
-25-
(2) Mouse operation fails
User Manual Digicom Magic 7000 Multi-Screen Processor
-26-
6. Glossary
Display unit ――The unit type optical display product with integrated structure, generally
composed of mechanism, reflector, mechanical adjustment part and chassis.
Display wall ―― The large area display equipment made up of multiple display units in M
rows × N columns structure
Display wall system ―― The comprehensive display system with certain functions, which is
made up of display wall, multi-screen processor and peripheral devices.
User Manual Digicom Magic 7000 Multi-Screen Processor
-27-
7. Contact us
About after sales service matters please contact after sales department of VTRON
GROUP CO.,LTD.
VTRON GROUP CO.,LTD.
No. 233 Kezhu Road, Guangzhou Hi-Tech Industrial Development Zone
(Guangzhou Science City),
Guangzhou 510670, China
Tel: +86-20-8390-8888
Fax: +86-20-8390-3591
Email: [email protected]
VTRON GROUP CO.,LTD. (Hong Kong)
Unit 1608-09, 16/F, Tower 1, 193 Prince Edward Road West, Grand Century
Place Mongkok, Kowloon Hong Kong
Tel: +852-2264-3688
Fax: +852-2264-3833
Email: [email protected]
VTRON Hong Kong Technical Support Centre
Unit 1225, 12/F, Corporation Park,11 On Lai Street,
Shatin, New Territories, Hong Kong
Tel: +852-2613-9708
Fax: +852-2613-9277
Email: [email protected]
VTRON GROUP CO.,LTD. (Malaysia Rep Office)
Unit 29-6 Block E1, Dataran Prima Business Centre, Jalan PJU 1/42, Petaling Jaya
47301, Selangor Darul Ehsan, Malaysia.
Tel: +603-7880-0338
Fax: +603-7887-0304