Upload
dinhnhu
View
215
Download
0
Embed Size (px)
Citation preview
www.farfitech.com
User Manual
Farfi WE-N300WiFi Rang Extender/Wireless Router/Access Point
QUICK INTALLITION GUIDE
1.Mode Rpeater(Using Your Smart-Phone)-Make sure the route works normal.- Plug it into an electrical outlet ( closest to your primary
router/WiFi access point ).-Use your Smart-Phone to connect with the repeater (find
"FARFI" and connect with it).
-Visit the IP address 192.168.10.1 from a web browser.
-Log-in to the Admin Page by using "admin" for password, andthen it will scan the exsisited wireless signals.
-Choose your Router's/AP's network in the next window andselect it.
-Enter your Router's/AP's WIFI password in thePassword/WIFI Key/Security key column and click on "Apply"
-In the next window, you'll see the reboot process .(Leave thedevice for 30 seconds to let it reboot itself).
-Open the list of available networks again using yoursmartphone. Find out the New SSID "ChinaNet-Nytw-plus" andconnect with it using the same password as of your primaryrouter/AP.
-if the internet works, unplug FARIFI WE-N300 and plug ithalfway between your Router and the Device intended for theinternet usage/dead zones in your home where you were gettinglow to no WIFI signals.
2.Repeater Mode(Using Your Laptop)-Make sure the route works normal.-Plug it into an electrical outlet ( closest to your primary
router/WiFi access point ).-Use your Laptop to connect with the repeater (find "FARFI"
and connect with it in your wireless signal list).-Visit the IP address 192.168.10.1 from a web browser.-Log-in to the Admin Page by using "admin" for both the
username and password, and then it will scan the exsisitedwireless signals.
-Choose the Repeater Mode and and click to get in.Therepeater will scan the wireless signal arround it for about 30seconds.
-Choose your Router's/AP's network in the next window andselect it.
-Enter your Router's/AP's WIFI password in thePassword/WIFI Key/Security key column and click on "Apply"
-In the next window, you'll see the reboot process .(Leave thedevice for 30 seconds to let it reboot itself).
-Open the list of available networks again using yoursmartphone. Find out the New SSID "ChinaNet-Nytw-plus" andconnect with it using the same password as of your primaryrouter/AP.