User Manual ET-PIC24WEB

7/29/2019 User Manual ET-PIC24WEB

http://slidepdf.com/reader/full/user-manual-et-pic24web 1/33

User ’ s Manual of ET- PI C 24 WEB- V1

-1-

ET- PI C 24 WEB- V1

ET- PI C 24 WEB- V1 i s PI C Boar d Mi crocont r ol l er f r om

Mi cr ochi p t hat uses 16 Bi t No. PI C24FJ 128GA008 Mi cr ocont r ol l erf or pr ocessi ng dat a and devel ops board. The r emar kabl especi f i cat i on of PI C24FJ 128GA008 i s hi gh speed and t her e i sf ol l owi ng r esour ces as bel ow;

o Cent r al Pr ocessi ng Uni t ( CPU)

• 16 MI PS speed t o pr ocess data • Har dwar e suppor t s 16 x 16 Bi t mul t i pl i cat i on t hat t akes

onl y 1 I nst r uct i on Cycl e • Har dwar e suppor t s 32- Bi t x 16 Bi t di vi si on • C Compi l e i s desi gned t o Opt i mi zed I nst r uct i on Set

o Syst em

• I nter nal Cl ock Generat or 31kHz t o 8MHz and maxi mum 32MHzby usi ng 4X PLL

• I nt er nal LDO Vol t age Regul at or Ci r cui t • Suppor t J TAG Boundar y Scan and Fl ash Memor y Pr ogr am

Suppor t • Fai l - Saf e Cl ock Moni t or - al l ows saf e shut down i f cl ock

f ai l s

• Wat chdog Ti mer Syst em uses Si gnal Cl ock as RC Osci l l at ort hat i s separ at ed f r om ot her par t s

• Vol t age 2. 0- 3. 6 Vol t

o nanoWat t Power Managed Modes

• Suppor t RUN Mode, I DLE Mode, and SLEEP Node • Can adj ust var i ous oper at i on Modes of Si gnal Cl ock t o be

more ef f i ci ent and i t cor r esponds wi t h power management o Anal og Feat ur es

• 10- bi t 16 Channel Modul e Anal og t o Di gi t al Conver t er wi t h500 Kbi t / second f or speed of Sampl i ng si gnal

• 2 Channel Modul e Anal og Compar at or s

o Ot her Speci f i cat i ons of PI C24FJ 128GA008

• 2 Channel Modul e UART Communi cat i on wi t h 4- st oreyed dept hof FI FO Buf f er




-2-

• 2 Channel Modul e SPI Communi cat i on wi t h 8- st oreyed deptof FI FO Buf f er

• 2 Channel Modul e I 2C™ Communi cat i on suppor t s bot h Mast erMode and Sl ave Mode

• 16- Bi t 5 Modul e Ti mer• 5 Modul e Capt ure, Compare/ PWM• I nt er nal Har dwar e Syst em as RTCC, Real - Ti me Cl ock

Cal endar wi t h Al arms• Communi cat i on Syst em as PWP, Par al l el Mast er Por t , wi t h

16 Addr ess Li nes, and 8/ 16 Dat a

• 128KByt e Fl ash Memor y

• 8KByt e SRAM• 70 Bi t I / O Por t s

Gener al Speci f i cat i ons of Boar d ET- PI C 24 WEB

- 80 PI N PI C24FJ 128GA008 Mi cr ocont r ol l er

- 8 MHz Si gnal Cl ock Osci l l at or ( can use x4 PLL t o run upt o 32 MHz)

- 9 Por t 10 PI N I / O Por t ( ETT st andar d ar r angement )

- 2 Por t RS232 Dr i ver Ci r cui t

- 1 Por t t o connect LCD ( ET- CLCD) under ETT st andardar r angement

-Connect I CD2 t o downl oad pr ogr am and Swi t ch t o on/ of f si gnal Run/ Pr ogr am

- 8 Channel LED Ci r cui t t o t est Out put

- 4 Channel Swi t ch BUTTON Ci r cui t t o t est I nput

- 1 Channel 0- 3. 3V Vol t age Gener at or Ci r cui t f r omadj ust abl e Resi st or t o t est Modul e A/ D

- 1 Por t t o connect wi t h EEPROM 25LCxxx

- Por t t o connect wi t h Modul e I nt er net ET- MI NI ENC28J 60

-Swi t chi ng Regul at or t o conver t si gnal DC I nput t o 3. 3V

- Connect or VCC and GND




-3-

St r uct ur e of Boar d ET- PI C 24 WEB- V1

1 2 3

4

5

6

7

8

9

1011

12

13

14

15

16

17

18

19

20

21

22

23

Det ai l s

No. 1 i s 2 Por t t o connect Si gnal RS- 232 and i t s ci r cui tconnect i on i s shown bel ow.

C2-

C2+

C1-

C1+ VCC

GND

V+

V-

16

2

5

4

3

1

MAX232

6

15

0.1uF

0.1uF

0.1uF

0.1uF

RF4RF5

R2O

T2I10

9

TX

RX 8

7 T2O

R2I

PICMCU

123

4

14

+3.3V

123

4

RS232-CH1

RS 232-CH2

RX

TX

13R1I

T1O

R2O T2I

12

11RF2

RF3

470

470

+3.3V

+3.3V

No. 2 i s Por t ET- LCD t o connect wi t h Char act er LED Di spl ayand i t s pi n ar r angement i s shown bel ow;




-4-

1 2

3 4

5 6

7 8

9 10

RA9 RA10

RA14 RA15

NC NC

+3.3V GND

PORTA

NC NC

1 2

3 4

5 6

7 8

9 10

RB0 RB1

RB2 RB3

RB4

+3.3V GND

PORTB-L

RB6 RB7

RB5

1 2

3 4

5 6

7 8

9 10

RB8 RB9

RB10 RB11

RB12 RB13

+3.3V GND

PORTB-H

RB14 RB15

1 2

3 4

5 6

7 8

9 10

RD8 RD9

RD10 RD11

RD12 RD13

+3.3V GND

PORTD-H

RD14 RD15

1 2

3 4

5 6

7 8

9 10

RE0 RE1

RE2 RE3

RE4 RE5

+3.3V GND

PORTE-L

RE6 RE7

1 2

3 4

5 6

7 8

9 10

RF0 RF1

RF2 RF3

RF4 RF5

+3.3V GND

PORTF-L

RF6 RF7

D4

D5

D6

D7

RS

RW

EN

RE0

RE1

PICMCU

RE2

RE3

RE4

RE5

RE6

1 2

3 4

5 6

7 8

9 10

+5V

RS

EN

GND

GND

GND

VO

RW

GND

GND

ET-CLCD

11 12

13 14

D4

D6D7

D5

VR10K

+5V

RE0

RE1

RE2

RE3

RE6

RE4

D4

D5

D6

D7

EN

RS

LCD Pin PICMCU

RE5RW

• No. 3, 4, 5, 6, 7, 8, 9, 10, and 11 i s Por t I / O of

Mi cr ocont r ol l er t hat i s desi gned t o be t he f or mat of t hest andar d 10- PI N ETT Por t and each port i s ar r anged asbel ow;




-5-

1 2

3 4

5 6

7 8

9 10

RC1 RC3

RC13 RC14

NC NC

+3.3V GND

PORTC

NC NC

1 2

3 4

5 6

7 8

9 10

RD0 RD1

RD2 RD3

RD4 RD5

+3.3V GND

PORTD-L

RD6 RD7

1 2

3 4

5 6

7 8

9 10

RG0 RG1

RG2 RG3

RG6 RG7

+3.3V GND

PORTG

RG8 RG9

• No. 12 i s 4 PI N I / O Por t t hat consi st s of Si gnal RE8, RE9,RF8 and GND as bel ow;

1

2

3

4

RE8

RE9RF8

• No. 13 i s Connect or t o downl oad pr ogr am t hat i s ar r anged

under t he st andard of I CD2 and suppor t s Progr ammer t hati s st andar d I CD2 I nt er f ace such as PI CKi t 2, I CD2 and ETTPr ogr ammer “ET- PGMPI C USB”. User must al ways pr ess Swi t chMODE t o PGM posi t i on bef ore pr ogr ammi ng t o on/ of f si gnalpi n wi t h ext ernal pr ogr ammer.




-6-

•

No. 14 i s Swi t ch t o sel ect Mode RUN and PGM. When thi sSwi t ch i s shi f t ed t o PGM posi t i on, i t wi l l on/ of f si gnalpi n t hat i s used t o pr ogr am data code i nt o pr ogr ammer f orprogr ammi ng t he desi gned dat a pr ogr am. When Swi t ch i sshi f t ed t o RUN posi t i on, i t make si gnal pi ns gener al I / O.

PGM

RUN

MODE

• No. 15 i s Connect or DC- J ACK t o suppl y power i nt o boar d andsuppor t s ext er nal Vol t age 9- 12 VDC.

• No. 16 i s Swi t ch RESET.

• No. 17 i s 80- Pi n I C PI C24FJ 128GA008 Mi cr ocont r ol l er .

• No. 18 i s EEPROM No. 25LCxxx f r om Mi cr ochi p t hat i s SPI

I nt er f ace.




-7-

1 2

3 4

5 6

7 8

9 10

RG6 (SCK) RG7(SO)

RG8 (SI) RD12 (CS)

NC NC

+3.3V GND

SPI MEMORY

NC NC

EN

DIS

I NT

R S T

W OL

R E 8

R D1 5

R E 9 I t i s J umper t o sel ect t he connect i on

f or si gnal RE8, RD15 and RE9 of Mi crocont r ol l er wi t h si gnal Pi n I NT,RST and WOL of Modul e ET- MI NI ENC28J 60.DI S= Di sabl e: Not Connect EN= Enabl e: Connect

• No. 19 i s Connect or t o connect wi t h Modul e I nt er net ET-MI NI ENC28J 60.

No. 20 i s Test I / O LED t hat consi st s of 8 LED and i t sci r cui t i s shown bel ow;




-8-

2-Pin CON

10K

SW-Button

+3.3V

2-Pin CON

10K

SW-Button

+3.3V

2-Pin CON

10K

SW-Button

+3.3V

2-Pin CON

10K

SW-Button

+3.3V

2-Pin CON

VR10K

+3.3V

• No. 21 i s devi ce t o t est si gnal I nput f r om 4 Swi t chest hat can cr eat e si gnal Logi c 0 ( 0 Vol t ) and Logi c 1 ( +3. 3Vol t ) as shown i n t he ci r cui t bel ow;

• No. 22 i s 4 devi ce set s t o t est Anal og Vol t age and i t can

adj ust Vol t age l evel i n t he r ange of 0- 3. 3 Vol t and i t sci r cui t i s shown bel ow;

• No. 23 i s avai l abl e space t o i nt er f ace f ur t her ci r cui t .




-9-

Modul e ET- MI NI ENC28J 60

ET- MI NI ENC28J 60 i s a modul e t hat i s desi gned t o be amedi um of t he connect i ons bet ween Mi cr ocont r ol l er and Et her netNet wor k. I t suppor t s oper at i on of Pr ot ocol TCP/ I P by usi ng I CENC28J 60 t hat i s I C Et her net Cont r ol l er t o suppor t I EEE 802. 3st andar d communi cat i on and connect si gnal cont r ol l er t hr oughSPI Bus wi t h maxi mum hi gh speed 10 Mb/ s. Mi cr ochi p support sMi cr ochi p TCP/ I P St ack t o devel op pr ogr am and user candownl oad f r ee wi t hout any char ge f r om Mi cr ochi p websi t e( www. mi cr ochi p. com) . The br i ef l y speci f i cat i ons of ENC28J 60 i sdescr i bed bel ow;

Speci f i cat i ons of I C ENC28J 60

Gener al : - I EEE 802. 3 compat i bl e Et her net Cont r ol l er- I nt egrat ed MAC and 10BASE- T PHY- 8Kbyt e Tr ansmi t / Recei ve Packet Dual Por t Buf f er SRAM- Progr ammabl e Aut omat i c Ret r ansmi t on Col l i si on- Pr ogr ammabl e Paddi ng and CRC Gener at i on- Progr ammabl e Aut omat i c Rej ect i on of Er r oneous Packet s

-SPI ™ I nt er f ace wi t h speeds up t o 10 Mb/ s

- Suppor t s Ful l and Hal f - Dupl ex modes

Buf f er :

- Conf i gur abl e t r ansmi t / r ecei ve buf f er si ze

- Har dwar e managed ci r cul ar r ecei ve FI FO

- Byt e- wi de r andom and sequent i al access

- I nt ernal DMA f or f ast memory copyi ng

- Har dwar e assi st ed I P checksum cal cul at i on

PHY:

- Wave shapi ng out put f i l t er

- Loopback mode

MAC:

- Suppor t f or Uni cast , Mul t i cast and Br oadcast packet s-

Progr ammabl e pat t ern mat chi ng of up t o 64 byt eswi t hi n packet at user def i ned of f set




-10-

- Progr ammabl e wake- up on mul t i pl e packet f ormat s,i ncl udi ng Magi c Packet ®, Uni cast , Mul t i cast ,Br oadcast , speci f i c packet mat ch or any packet

The met hod t o connect devi ce wi t h Mi cr ocont r ol l er i s

qui t e easy because i t i s SPI Bus I nt er f ace t hat uses f ewerpi ns. For power syst em of ENC28J 60 i s 3 Vol t I C i f user want st o r un wi t h 5 Vol t Mi crocont r ol l er , user must Buf f er Ci r cui tt hat i s desi gned by ETT. I t suppor t s t he connect i on of powersyst em bet ween 3 Vol t and 5 Vol t i nt er nal Boar d ET- MI NIENC28LJ 60; i n t hi s case, user can sel ect power syst em byset t i ng J umper 5V/ 3V3.

Pi ct ur e di spl ays bl ock di agr am of t he connect i on si gnal sbet ween ENC28J 60 and Mi cr ocont r ol l er .




-11-

+5V

+3.3V

VDD

Pi ct ur e di spl ays st r uct ur e of Boar d ET- MI NI ENC28J 60.

Fr om pi ct ur e above, HD1 and HD2 i s desi gned t o connectwi t h Boar d ET- PI C 24 WEB; f or HD3 i s desi gned t o connect wi t hot her Mi crocont r ol l er s and i t i s desi gned i n t he f eat ur e of ET- MI NI f r om ETT.

War ni ng: User mustset J umper cor r ect l yf ol l ows the t r ul yusage ot her wi se yourdevi ce maybe damaged.




-12-

Tabl e shows Name and Funct i on of Si gnal Pi ns of ENC28J 60 Pin Name Pin Type Function

CS INPUT Si gnal Enabl e/ Di sabl e t he SPI BusI nt er f ace of ENC28J 60

CS = 0 i s Enabl e t he SPI Bus

I nt er f ace of ENC28J 60CS = 1 i s Di sabl e t he SPI BusI nt er f ace of ENC28J 60

SDO OUTPUT Si gnal Ser i al Dat a Out put

SDI INPUT Si gnal Ser i al Dat a I nput

SCK INPUT Si gnal Ser i al Cl ock

INT OUTPUT Si gnal I nt er r upt Act i ve Logi c 0

RST INPUT Si gnal RESET Act i ve Logi c 0

WOL OUTPUT Si gnal Wake- up on LAN i nt er r uptAct i ve Logi c 0

CLKO OUTPUT Si gnal Progr ammabl e cl ock out put

LEDA OUTPUT Di spl ay st at us of Si gnal LI NK

LEDB OUTPUT Di spl ay st at us of Si gnal ACT

Tabl e shows t he si gnal connect i on bet ween Board ENC28J 60 andET- PI C24 WEB

ENC28J60 ET-PIC24WEB (PIC24FJ128GA008)

CS RD14

SDO RF8

SDI RF7

SCK RF6

INT RE8 (Set Jumper )

RST RD15 (Set Jumper )

WOL RE9 (Set Jumper )

CLKO -

LEDA -

LEDB -




-13-

Summar i ze Al l ocat i on and Use Resour ces of Boar dET- PI C24 WEB V1. 0

Normal l y, MCU NO. PI C24FJ 128GA008 that i s used wi t h Boar dET- PI C24 WEB V1. 0 has i ndependent si gnal pi n up to 69 I / O but

some si gnal pi n i s desi gned and connect ed wi t h par t i cul ar I / Odevi ce, so user can use t hese si gnal pi ns t o be gener al I / Oand we can summar i ze t hese si gnal pi ns as bel ow;

MCU Osci l l at or

• RC12 i s used t o be OSC1 and connect s wi t h Cr yst al 8. 00MHzt o be Si gnal Cl ock of MCU.

• RC15 i s used t o be OSC2 and connect s wi t h Cr yst al 8. 00MHzt o be Si gnal Cl ock of MCU.

RTC Osci l l at or

• RC13 i s used t o be OSC1 and connect s wi t h Cr yst al32. 768KHz t o be Si gnal Cl ock of RTC.

• RC14 i s used t o be OSC2 and connect s wi t h Cr yst al32. 768KHz t o be Si gnal Cl ock of RTC.

RS232- CH1 Ser i al Por t Communi cat i on ( UART)

• RF2 i s used t o be Pi n RXD t o r ecei ve dat a f r om RS232Channel 1.

• RF3 i s used t o be Pi n TXD t o t r ansmi t dat a t o RS232Channel 1.

RS232- CH2 Ser i al Por t Communi cat i on ( UART)

• RF4 i s used t o be Pi n RXD t o r ecei ve dat a f r om RS232Channel 2.

• RF5 i s used t o be Pi n TXD t o t r ansmi t dat a t o RS232Channel 2.

Et her net Modul e ( SPI - 1)

• RF6 i s used t o be SCK t o connect wi t h Et her net Modul e( ET- MI NI ENC28J 60) .

• RF7 i s used t o be SDI t o connect wi t h Et her net Modul e( ET- MI NI ENC28J 60) .

• RF8 i s used t o be SDO t o connect wi t h Et her net Modul e( ET- MI NI ENC28J 60) .




-14-

• RD14 i s used t o be CS t o connect wi t h Et her net Modul e( ET- MI NI ENC28J 60) .

• RE8 i s used t o be I NT1 t o connect wi t h Et her net Modul e( ET- MI NI ENC28J 60) . I n t hi s case, user can sel ect t o useor not use as desi r ed by set t i ng J umper I NT ( EN/ DS) ;

nor mal l y, J umper i s set t o be DS ( Di sabl e: Not use) . • RE9 i s used t o be WOL t o connect wi t h Et her net Modul e

( ET- MI NI ENC28J 60) . I n t hi s case, user can sel ect t o useor not use as desi r ed by set t i ng J umper WOL ( EN/ DS) ;nor mal l y, J umper i s set t o be DS ( Di sabl e = Not use) .

• RD15 i s used t o be RST t o connect wi t h Et her net Modul e( ET- MI NI ENC28J 60) . I n t hi s case, user can sel ect t o useor not use as desi r ed by set t i ng J umper RST ( EN/ DS) ; nor mal l y, J umper i s set t o be DS ( Di sabl e = Not use) .

SPI Memory Modul e ( SPI - 2)

• RG6 i s used t o be SCK t o connect wi t h SPI Memory.

• RG7 i s used t o be SDI t o connect wi t h SPI Memory.

• RG8 i s used t o be SDO t o connect wi t h SPI Memory.

• RD12 i s used t o be CS t o connect wi t h SPI Memory.

Char act er LCD Di spl ay

• RE0 i s used t o be LCD D4 t o connect wi t h 4 Bi t Char act erLCD.




• RE4 i s used t o be LCD RS t o connect wi t h 4 Bi t Char act erLCD.

• RE5 i s used t o be LCD RW t o connect wi t h 4 Bi t Char act erLCD.

• RE6 i s used t o be LCD EN t o connect wi t h 4 Bi t Char act erLCD.

LED[ 1. . 8] t o t est Web Ser ver Cont r ol

•

RD0. . RD7 i s used t o be Di gi t al Out put and connect s wi t hLED [ 1. . 8] .




-15-

SW[ 1. . 4] t o t est Web Ser ver Cont r ol

• RD8. . RD11 i s used t o be Di gi t al I nput and connect s wi t hSwi t ch[ 1. . 4] .

ADC I nput t o t est Web Ser ver Cont r ol

• RB5 ( AN5) i s used t o be ADC0 t o r ead I nput val ue of 10Bi t Anal og t o Di gi t al and connect s wi t h VR1.




-16-

I ni t i al Recommendat i on of MPLAB C30

Open Pr ogr am MPLAB I DE, cl i ck St ar t - > Mi cr ochi p - > MPLABI DE v7. 61 - > MPLAB I DE or doubl e cl i ck I con MPLAB I DE onDeskt op as shown bel ow.

2. I t wi l l di spl ay wi ndow of Pr ogr am MPLAB I DE v7. 61 asshown bel ow.

Or doubl ecl i ck I CONMPLAB I DE




-17-

Cr eat e Pr oj ect , cl i ck Pr oj ect - > Pr oj ect Wi zar d. .

I t wi l l di spl ay Wi ndow Pr oj ect Wi zar d; cl i ck Next > t o dot he next st ep.

Sel ect devi ce i n t he bl ank of Devi ce: and i t must becor r espondi ng wi t h Boar d. I n t hi s case, i t i s

PI C24FJ 128GA008 and t hen cl i ck Next >.




-18-

Sel ect t he used Compi l er ; i n t hi s case, i t i s MPLAB C30 CCompi l er ( pi c30- gcc. exe) and t hen cl i ck Next >.

Cl i ck Br owse t o t he desi r ed Fol der t o st or e Pr oj ect ; f orexampl e, cr eat e Fol der name PI C24_Star t f ol l ows t heexampl e and t hen Br owse. . t he Fol der , speci f y Pr oj ectname; i n t hi s exampl e, i t i s Demo1 and t hen Save.




-19-

I t wi l l di spl ay wi ndow; i n t hi s case, user can Add or

Remove Fi l e Codes i n pr oj ect i f t her e i s Fi l e Code i npr oj ect , but i f t her e i s no any Fi l e Code, cl i ck Next > t o go t o t he next st ep.




-20-

I t wi l l di spl ay wi ndow t hat summar i zes Par amet er val uesof t he creat ed Pr oj ect , ver i f y val ues cor r ect l y, and t hencl i ck Fi ni sh t o end t he st ep of Pr oj ect Wi zard.

I t ent er s t he mai n wi ndow of MPLAB, cl i ck Vi ew - > Proj ect

I t wi l l di spl ay wi ndow t hat shows st r uct ur e of Pr oj ect asshown bel ow.




-21-

Cl i ck Fi l e - > New t o cr eat e Fi l e Sour ce Code.

I t wi l l di spl ay t he bl ank screen wi ndow t hat i s Unt i t l edas shown bel ow.




-22-

Sel ect Fi l e - > Save As… t o save as Fi l e. C

Speci f y f i l ename and f ol l ow by sur name . C; i n t hi sexampl e, i t i s Demo1. C and t hen sel ect s Save as t ype: t obe C Sour ce Fi l es ( *. c, *. h) as shown bel ow.




-23-

Fi l e Demo1. c wi l l be appear ed and t hen t ype code pr ogr ami nt o t he f i l e as shown i n t he exampl e bel ow.

Save f i l e, cl i ck Fi l e - > Save




-24-

Add t he creat ed Fi l e Sour ce Code i nt o Pr oj ect , cl i ckr i ght on Sour ce Fi l e and t hen sel ect Add Fi l es. .

I t wi l l di spl ay wi ndow Add Fi l es t o Pr oj ect , cl i ck l ef t

on Fi l e Sour ce Code; i n t hi s exampl e, i t i s Demo1 andt hen cl i ck Open.




-25-

Fi l ename Demo1. c wi l l appear i n Sour ce Fi l es.

Add Fi l e Li nker Scr i pt s, cl i ck r i ght on Li nker Scr i pt s and t hen sel ect Add Fi l es. .




-26-

I t wi l l di spl ay wi ndow Add Fi l es t o Pr oj ect s, c l i c k f i l ep24FJ 128GA008. gl d t hat i s i n t he f ol l owi ng f ol der ;

C: \ Pr ogr am Fi l es\ Mi cr ochi p\ MPLAB C30\ suppor t \ gl d

When ever ythi ng i s compl et e, user can see f i l ep24FJ 128GA008. gl d t hat has al r eady added i nt o Li nker

Scr i pt s compl etel y as shown bel ow;




-27-

Next , compi l e pr oj ect ; cl i ck Pr oj ect - > Bui l d Al l asshown bel ow.

I t wi l l r epor t r esul t of compi l i ng i n t he wi ndow Out put -> Bui l d; i f compi l i ng i s compl et e, i t wi l l di spl aymessage BUI LD SUCCEEDED as shown bel ow.




-28-

I t wi l l di spl ay Fi l e Demo1. Hex i n t he same f ol der as t hecr eated f i l e as shown bel ow;




-29-

Code Pr ogr ammi ng

Af t er user get s Hex Fi l e; next , i t i s pr ogr ammi ng codei nt o Mi crocont r ol l er of Boar d ET- PI C 24 WEB; i n t hi s case, i tmust use ext ernal pr ogr ammer such as I CD2, PI CKi t 2 or ETTProgr ammer ver si on ET- PGM USB. User can i nt er f ace Cabl e f orpr ogr ammi ng at Connect or I CD2 as shown i n the pi ct ur e bel ow.

Press Swi t ch MODE t o PGM posi t i on.

PGM

RUN

MODE

Open Progr am PI Cki t 2 Pr ogr ammer .

ET-PGMPIC USB

ET- PIC24WEB




-30-

Sel ect Devi ce Fami l y - > PI C24

I f t he connect i on i s compl et e, i t can f i nd Devi ce numbert o be PI C24FJ 128GA008 as shown bel ow. I n t he f i r st st ep,user must sel ect Er ase t o er ase t he ol d pr ogr am Memory.




-31-

I mpor t Fi l e. HEX, cl i ck Fi l e - > I mpor t and ent er Fol der PI C24_Star t t o sel ect f i l e Demo1. Hex and t hen Open.




-32-

I t wi l l di spl ay message “Hex Fi l e successf ul l y i mpor t ed”; cl i ck Wr i t e t o pr ogr am Hex code i nt o memor y of Mi crocont r ol l er .

When i t has al r eady pr ogr ammed compl et el y, i t wi l ldi spl ay message “Pr ogr ammi ng Successf ul l y” as shownbel ow.




Shi f t Swi t ch MODE t o RUN posi t i on.

PGM

RUN

MODE

Connect Har dwar e t o t est oper at i on of pr ogr am as f ol l ows;

PIC24FJ128GA008 LED

RD0 LED1

RD1 LED2

RD2 LED3

RD3 LED4

RD4 LED5

RD5 LED6

RD6 LED7

RD7 LED8

Each LED f r om LED 1 t o LED 8 wi l l be ON one by one.

Documents

User Manual ET-PIC24WEB