30
www.philips.com/welcome BDL4235DL User Manual (English)

User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

www.philips.com/welcome

BDL4235DL

User Manual (English)

Page 2: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

ii

Safety Instructions

Safety precautions and maintenance

WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your display:

Operation:• Keepthedisplayoutofdirectsunlightandawayfromstovesorany

otherheatsources.• Removeanyobjectthatcouldfallintoventilationholesorprevent

propercoolingofthedisplay’selectronics.• Donotblocktheventilationholesonthecabinet.• Whenpositioningthedisplay,makesurethepowerplugandoutlet

areeasilyaccessible.• Whenturningoffthedisplaybydetachingthepowercord,wait6

secondsbeforere-attachingthepowercordfornormaloperation.• EnsuretheuseofanapprovedpowercordprovidedbyPhilipsat

alltimes.Ifyourpowercordismissing,pleasecontactyourlocalservicecenter.

• Donotsubjectthedisplaytoseverevibrationorhighimpactconditionsduringoperation.

• Donotknockordropthedisplayduringoperationortransportation.

Maintenance:• Toprotectyourdisplayfrompossibledamage,donotputexcessive

pressureontheLCDpanel.Whenmovingyourdisplay,grasptheframetolift;donotliftthedisplaybyplacingyourhandorfingersontheLCDpanel.

• Unplugthedisplayifyouarenotgoingtouseitforanextensiveperiodoftime.

• Unplugthedisplayifyouneedtocleanitwithaslightlydampcloth.Thescreenmaybewipedwithadryclothwhenthepowerisoff.However,neveruseorganicsolvent,suchas,alcohol,orammonia-basedliquidstocleanyourdisplay.

• Toavoidtheriskofshockorpermanentdamagetotheset,donotexposethedisplaytodust,rain,wateroranexcessivelymoistenvironment.

• Ifyourdisplaybecomeswet,wipeitwithdryclothassoonaspossible.

• Ifaforeignsubstanceorwatergetsinyourdisplay,turnthepoweroffimmediatelyanddisconnectthepowercord.Thenremovetheforeignsubstanceorwater,andsendtheunittothemaintenancecenter.

• Donotstoreorusethedisplayinlocationsexposedtoheat,directsunlightorextremecold.

• Inordertomaintainthebestperformanceofyourdisplayandensurealongerlifetime,westronglyrecommendusingthedisplayinalocationthatfallswithinthefollowingtemperatureandhumidityranges.- Temperature:0-40°C32-104°F

- Humidity:20-80%RH

IMPORTANT:Alwaysactivateamovingscreensaverprogramwhenyouleaveyourdisplayunattended.Alwaysactivateaperiodicscreenrefreshapplicationiftheunitwilldisplayunchangingstaticcontent.Uninterrupteddisplayofstillorstaticimagesoveranextendedperiodmaycause“burnin”,alsoknownas“after-imaging”or“ghostimaging”,onyourscreen.Thisisawell-knownphenomenoninLCDpaneltechnology.Inmostcases,the“burnedin”or“after-imaging”or“ghostimaging”willdisappeargraduallyoveraperiodoftimeafterthepowerhasbeenswitchedoff.

WARNING:Severe“burn-in”or“after-image”or“ghostimage”symptomswillnotdisappearandcannotberepaired.Thisisalsonotcoveredunderthetermsofyourwarranty.

Service:• Thecasingcovershouldbeopenedonlybyqualifiedservice

personnel.• Ifthereisanyneedforrepairorintegration,pleasecontactyour

localservicecenter.• Donotleaveyourdisplayunderdirectsunlight.

Ifyourdisplaydoesnotoperatenormally,havingfollowedtheinstructionssetoutinthisdocument,pleasecontactatechnicianoryourlocalservicecenter..

Page 3: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

iii

Read and follow these instructions when connecting and using your Public Information Display:

• Unplugthedisplayifyouarenotgoingtouseitforanextensiveperiodoftime.

• Unplugthedisplayifyouneedtocleanitwithaslightlydampcloth.Thescreenmanybewipedwithadryclothwhenthepowerisoff.However,neverusealcohol,solventsorammonia-basedliquids.

• Consultaservicetechnicianifthedisplaydoesnotoperatenormallywhenyouhavefollowedtheinstructionsinthismanual.

• Thecasingcovershouldbeopenedonlybyqualifiedservicepersonnel.

• Keepthedisplayoutofdirectsunlightandawayfromstovesoranyotherheatsources.

• Removeanyobjectthatcouldfallintotheventsorpreventpropercoolingofthedisplay’selectronics.

• Donotblocktheventilationholesonthecabinet.• Keepthedisplaydry.Toavoidelectricshock,donotexposeitto

rainorexcessivemoisture.• Ifturningoffthedisplaybydetachingthepowercable,waitfor6

secondsbeforere-attachingthepowercablefornormaloperation.• Toavoidtheriskofshockorpermanentdamagetothesetdonot

exposethedisplaytorainorexcessivemoisture.• Whenpositioningthedisplay,makesurethepowerplugandoutlet

areeasilyaccessible.• IMPORTANT:Alwaysactivateascreensaverprogramduringyour

application.Ifastillimageinhighcontrastremainsonthescreenforanextendedperiodoftime,itmayleavean‘after-image’or‘ghostimage’onthefrontofthescreen.Thisisawell-knownphenomenonthatiscausedbytheshortcomingsinherentinLCDtechnology.Inmostcasestheafterimagewilldisappeargraduallyoveraperiodoftimeafterthepowerhasbeenswitchedoff.Beawarethattheafter-imagesymptomcannotberepairedandisnotcoveredunderwarranty.

Regulatory Information

CE Declaration of ConformityWedeclareunderourresponsibilitythattheproductisinconformitywiththefollowingstandards:

• EN60950-1:2006+A11:2009+A1:2010+A12:2011(SafetyrequirementofInformationTechnologyEquipment).

• EN55022:2010(RadioDisturbancerequirementofInformationTechnologyEquipment).

• EN55024:2010(ImmunityrequirementofInformationTechnologyEquipment).

• EN61000-3-2:2006+A1:2009+A2:2009(LimitsforHarmonicCurrentEmission).

• EN61000-3-3:2008(LimitationofVoltageFluctuationandFlicker)

• EN50581:2012(Technicaldocumentationfortheassessmentofelectricalandelectronicproductswithrespecttotherestrictionofhazardoussubstances)

followingprovisionsofdirectivesapplicable.

• 2006/95/EC(LowVoltageDirective).

• 2004/108/EC(EMCDirective).

• 2009/125/EC(ErP,Energy-relatedProductDirective,ECNo.1275/2008and642/2009Implementing)

• 2011/65/EU(RoHSDirective)andisproducedbyamanufacturingorganizationonISO9000level.

Page 4: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

iv

Federal Communications Commission (FCC) Notice (U.S. Only)

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentisoperatedinacommercialenvironment.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructionsmanual,maycauseharmfulinterferencetoradiocommunications.Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceathisownexpense.

Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment.

UseonlyanRFshieldedcablethatwassuppliedwiththedisplaywhenconnectingthisdisplaytoacomputerdevice.Topreventdamagewhichmayresultinfireorshockhazard,donotexposethisappliancetorainorexcessivemoisture.THISCLASSBDIGITALAPPARATUSMEETSALLREQUIREMENTSOFTHECANADIANINTERFERENCE-CAUSINGEQUIPMENTREGULATIONS.

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.

Polish Center for Testing and Certification NoticeTheequipmentshoulddrawpowerfromasocketwithanattachedprotectioncircuit(athree-prongsocket).Allequipmentthatworkstogether(computer,display,printer,andsoon)shouldhavethesamepowersupplysource.

Thephasingconductoroftheroom’selectricalinstallationshouldhaveareserveshort-circuitprotectiondeviceintheformofafusewithanominalvaluenolargerthan16amperes(A).

Tocompletelyswitchofftheequipment,thepowersupplycablemustberemovedfromthepowersupplysocket,whichshouldbelocatedneartheequipmentandeasilyaccessible.

Aprotectionmark“B”confirmsthattheequipmentisincompliancewiththeprotectionusagerequirementsofstandardsPN-93/T-42107andPN-89/E-06251.

Electric, Magnetic and Electronmagnetic Fields (“EMF”)1. Wemanufactureandsellmanyproductstargetedatconsumers,

which,likeanyelectronicapparatus,ingeneralhavetheabilitytoemitandreceiveelectromagneticsignals.

2. OneofourleadingBusinessPrinciplesistotakeallnecessaryhealthandsafetymeasuresforourproducts,tocomplywithallapplicablelegalrequirementsandtostaywellwithintheEMFstandardsapplicableatthetimeofproducingtheproducts.

3. Wearecommittedtodevelop,produceandmarketproductsthatcausenoadversehealtheffects.

4. Weconfirmthatifitsproductsarehandledproperlyfortheirintendeduse,theyaresafetouseaccordingtoscientificevidenceavailabletoday.

5. WeplayanactiveroleinthedevelopmentofinternationalEMFandsafetystandards,enablingustoanticipatefurtherdevelopmentsinstandardizationforearlyintegrationinitsproducts.

Page 5: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

v

Information for U.K. only

WARNING – THIS APPLIANCE MUST BE EARTHED.

Important:

(A)

(B)

Thisapparatusissuppliedwithanapprovedmoulded13Aplug.Tochangeafuseinthistypeofplugproceedasfollows:

1. Removefusecoverandfuse.2. FitnewfusewhichshouldbeaBS13625A,A.S.T.A.orBSIapproved

type.3. Refitthefusecover.

Ifthefittedplugisnotsuitableforyoursocketoutlets,itshouldbecutoffandanappropriate3-pinplugfittedinitsplace.

Ifthemainsplugcontainsafuse,thisshouldhaveavalueof5A.Ifaplugwithoutafuseisused,thefuseatthedistributionboardshouldnotbegreaterthan5A.

NOTE: Theseveredplugmustbedestroyedtoavoidapossibleshockhazardshoulditbeinsertedintoa13Asocketelsewhere.

How to connect a plug

Thewiresinthemainsleadarecolouredinaccordancewiththefollowingcode:

BLUE–“NEUTRAL”(“N”)BROWN–“LIVE”(“L”)GREEN&YELLOW–“EARTH”(“E”)

1. TheGREEN&YELLOWwiremustbeconnectedtotheterminalintheplugwhichismarkedwiththeletter“E”orbytheEarthsymbolorcolouredGREENorGREEN&YELLOW.

2. TheBLUEwiremustbeconnectedtotheterminalwhichismarkedwiththeletter“N”orcolouredBLACK.

3. TheBROWNwiremustbeconnectedtotheterminalwhichmarkedwiththeletter“L”orcolouredRED.

Beforereplacingtheplugcover,makecertainthatthecordgripisclampedoverthesheathofthelead–notsimplyoverthethreewires.

China RoHS

中国电子信息产品污染控制标识要求

本产品有毒有害物质或元素的名称及含量标识表:

零部件名称

有毒有害物质或元素

铅 (Pb)

汞 (Hg)

镉 (Cd)

六价铬(Cr 6+)

多溴联苯(PBBs)

多溴二苯醚(PBDEs)

塑料外框 O O O O O O后壳 O O O O O OLCD 面板

CCFL X X O O O OLED X O O O O O

电源基板 X O O O O O主基板 X O O O O O按键基板 X O O O O O底座 O O O O O O电源线 X O O O O O其他线材 X O O O O O遥控器 X O O O O O*:电路板组件包括印刷电路板及其构成的零部件,如电阻、电容、集成电路、连接器等。

○:表示该有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006《电子信息产品中有毒有害物质的限量要求》规定的限量要求以下。

×:表示该有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006《电子信息产品中有毒有害物质的限量要求》规定的限量要求;

备注:以上“×”的部件,部分含有有害物质超过是由于目前行业技术水平所限,暂时无法实现替代或减量化。

10 环保使用期限

在产品本体上标示的该标志表示环境保护使用期限为 10年。

电子信息产品的环境保护使用期限是指电子信息产品中所含的有毒有害物质或元素不会向外部泄漏或出现突然变异,并且电子信息产品的用户在使用该电子信息产品时也不会对环境造成严重污染或对人体、财产带来严重损害的期限。

在环境保护期限中,请按照使用说明书使用本产品。

本环境保护使用不覆盖易损件:电池。

《废弃电子产品回收处理管理条例》提示性说明为了更好地关爱及保护地球,当用户不再需要此产品或产品寿命终止时,请遵守国家废弃电器电子产品回收处理相关法律规定,将其交给当地具有国家认可的回收处理资质的厂商进行回收处理。

Page 6: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

vi

中国能源效率标识 根据中国大陆《能源效率标识管理办法》,本显示器符合以下要求

能源效率 (cd/W) >1.05能效等级 1级能效标准 GB 21520-2008

详细有关信息请查阅中国能效标识网: http://www.energylabel.gov.cn/

North Europe (Nordic Countries) Information

Placering/Ventilation

VARNING:FÖRSÄKRADIGOMATTHUVUDBRYTAREOCHUTTAGÄRLÄTÅTKOMLIGA,NÄRDUSTÄLLERDINUTRUSTNINGPÅPLATS.

Placering/Ventilation

ADVARSEL:SØRGVEDPLACERINGENFOR,ATNETLEDNINGENSSTIKOGSTIKKONTAKTERNEMTTILGÆNGELIGE.

Paikka/Ilmankierto

VAROITUS:SIJOITALAITESITEN,ETTÄVERKKOJOHTOVOIDAANTARVITTAESSAHELPOSTIIRROTTAAPISTORASIASTA.

Plassering/Ventilasjon

ADVARSEL:NÅRDETTEUTSTYRETPLASSERES,MÅDUPASSEPÅATKONTAKTENEFORSTØMTILFØRSELERLETTEÅNÅ.

End-of-Life DisposalYournewPublicInformationDisplaycontainsmaterialsthatcanberecycledandreused.Specializedcompaniescanrecycleyourproducttoincreasetheamountofreusablematerialsandtominimizetheamounttobedisposedof.

PleasefindoutaboutthelocalregulationsonhowtodisposeofyourolddisplayfromyourlocalPhilipsdealer.

(For customers in Canada and U.S.A.)Thisproductmaycontainleadand/ormercury.Disposeofinaccordancetolocal-stateandfederalregulations.Foradditionalinformationonrecyclingcontactwww.eia.org(ConsumerEducationInitiative)

Waste Electrical and Electronie Equipment-WEEE

Attention users in European Union private households

Thismarkingontheproductoronitspackagingillustratesthat,underEuropeanDirective2012/19/EUgoverningusedelectricalandelectronicappliances,thisproductmaynotbedisposedofwithnormalhouseholdwaste.Youareresponsiblefordisposalofthisequipmentthroughadesignatedwasteelectricalandelectronicequipmentcollection.Todeterminethelocationsfordroppingoffsuchwasteelectricalandelectronic,contactyourlocalgovernmentoffice,thewastedisposalorganizationthatservesyourhouseholdorthestoreatwhichyoupurchasedtheproduct.

Attention users in United States: PleasedisposeofaccordingtoallLocal,StateandFederalLaws.Forthedisposalorrecyclinginformation,contact:www.mygreenelectronics.comorwww.eiae.org.

End of Life Directives-Recycling

YournewPublicInformationDisplaycontainsseveralmaterialsthatcanberecycledfornewusers.

PleasedisposeofaccordingtoallLocal,State,andFederallaws.

AsanENERGYSTARPartner,wehavedeterminedthatthisproductmeetstheENERGYSTARguidelinesforenergyefficiency.

Page 7: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

vii

Table Of Contents

4.6.1. Playingmusicfiles..................................124.6.2. Playingmoviefiles.................................134.6.3. Playingphotofiles.................................13

5. Change your settings ............................................145.1. QuickPictureandSound..................................145.2. Settings........................................................................14

5.2.1. Picturemenu............................................145.2.2. Soundmenu.............................................155.2.3. Generalsettingsmenu........................16

5.3. NetworkSettings...................................................16

6. Input mode ..............................................................17

7. Pixel Defect Policy .................................................187.1. PixelsandSub-pixels............................................187.2. TypesofPixelDefects+DotDefinition.187.3. BrightDotDefects...............................................187.4. DarkDotDefects.................................................197.5. ProximityofPixelDefects................................197.6. PixelDefectTolerances......................................197.7. MURA..........................................................................19

8. Cleaning and Troubleshooting .............................208.1. Cleaning......................................................................208.2. Troubleshooting......................................................21

9. Technical Specifications ........................................22

1. Unpacking and Installation ..................................... 11.1. Unpacking.....................................................................11.2. PackageContents.....................................................11.3. InstallationNotes......................................................11.4. MountingonaWall.................................................21.5. MountinginPortraitPosition.............................3

1.5.1. Howtousethelogoguiderforportraitposition........................................3

1.5.2. Howtoremovethelogo.....................3

2. Parts and Functions ................................................. 42.1. ControlPanel..............................................................42.2. Input/OutputTerminals.........................................52.3. RemoteControl........................................................6

2.3.1. Generalfunctions.....................................62.3.2. Insertingbatteriesintheremote

control.............................................................72.3.3. Handlingtheremotecontrol.............72.3.4. Operatingrangeoftheremote

control.............................................................7

3. Connection ............................................................... 83.1. ConnectingExternalEquipments....................83.2. ConnectingMultipleDisplays............................9

3.2.1. RS232Ccontrolconnection(optional).......................................................9

3.2.2. IRconnection(optional)......................93.3. IRPass-throughConnection(optional).......93.4. Wire-connectingtoNetwork(optional)....10

4. Operation ................................................................114.1. WatchtheConnectedVideoSource.........114.2. ChangePictureFormat......................................114.3. SelectyourPreferredPictureSettings.......114.4. SelectyourPreferredSoundSettings........114.5. PlayMultimediaFiles............................................11

4.5.1. PlayMultimediafilesviaLocalAreaNetwork.....................................................11

4.5.2. Playfilesfromdisplay...........................114.5.3. PlaymultimediafilesfromUSB

device...........................................................124.6. Playoptions...............................................................12

Page 8: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

1

1. Unpacking and Installation

1.1. Unpacking• Thisproductispackedinacarton,togetherwiththestandardaccessories.• Anyotheroptionalaccessorieswillbepackedseparately.• Duetothesizeandweightofthisdisplayitisrecommendedfortwopeopletomoveit.• Afteropeningthecarton,ensurethatthecontentsarecompleteandingoodcondition.

1.2. Package ContentsPleaseverifythatyoureceivedthefollowingitemswithyourpackagecontent:

• LCDdisplay• CDROM• RemotecontrolwithAAAbatteries• Powercord(1.8m)• VGAcable(1.8m)• RS232cable(1.8m)• Quickstartguide• Logoguider• Powerswitchcover• ScrewforPowerswitchcover(M3,

8mmx1)

Register your product and get support at www.philips.com/welcome

Kurzanleitung / Guía rápida / Guide de démarrage rapide / Guida rapida / Instrukcja szybkiego uruchomienia / Краткое руководство по запуску / Hızlı başlangiç kılavuzu / 快速入门指南 / 快速入門指南

Installation / Installation / Instalación / Installation / Installazione / Instalacja / Установка / Kurulum / 安装 / 安裝

Connect / Verbindungsfähigkeit / Conectividad / Connectivité / Connettività / Połączenia / Подключение / Bağlantı / 连接性 / 連接性

LCD DisplayLCD-Display / Pantalla LCD / Écran LCD / Display LCD /

Wyświetlacz LCD / ЖК-монитор / LCD Ekran / 监视器 / 監視器

BDL4235DL

* The supplied power cord varies depending on destination.

Power Cord

Remote Control and AAA Batteries

VGA Cable

CD ROM

RS232 Cable

Quick Start Guide

Logo GuiderPower switch cover and screw (M3x8) x1

NOTES:• Forallotherregions,applyapowercordthatconformstotheACvoltageofthepowersocketandhasbeenapprovedbyandcomplieswiththe

safetyregulationsoftheparticularcountry.• Keepthepackageboxandpackingmaterialforshippingthedisplay.

1.3. Installation Notes• Duetothehighpowerconsumption,alwaysusetheplugexclusivelydesignedforthisproduct.Ifanextendedlineisrequired,pleaseconsultyour

serviceagent.• Theproductshouldbeinstalledonaflatsurfacetoavoidtipping.Thedistancebetweenthebackoftheproductandthewallshouldbemaintained

forproperventilation.Avoidinstallingtheproductinthekitchen,bathroomoranyotherplaceswithhighhumiditysoasnottoshortentheservicelifeoftheelectroniccomponents.

• Theproductcannormallyoperateonlyunder3000minaltitude.Ininstallationsataltitudesabove3000m,someabnormalitiesmaybeexperienced.

Page 9: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

2

1.4. Mounting on a WallTomountthisdisplaytoawall,youwillhavetoobtainastandardwall-mountingkit(commerciallyavailable).WerecommendusingamountinginterfacethatcomplieswithUL1678standardinNorthAmerica.

400

200

Protective Sheet

Table

1. Layaprotectivesheetonatable,whichwaswrappedaroundthedisplaywhenitwaspackaged,beneaththescreensurfacesoasnottoscratchthescreenface.

2. Ensureyouhaveallaccessoriesformountingthisdisplay(wallmount,ceilingmount,tablestand,etc).3. Followtheinstructionsthatcomewiththebasemountingkit.Failuretofollowcorrectmountingprocedurescouldresultindamagetotheequipment

orinjurytotheuserorinstaller.Productwarrantydoesnotcoverdamagecausedbyimproperinstallation.4. Forthewall-mountingkit,useM6mountingscrews(20mmlongplusthethicknessofthemountingbracket)andtightenthemsecurely.

Caution:Topreventthedisplayfromfalling:• Forwallorceilinginstallation,werecommendinstallingthedisplaywithmetalbracketswhicharecommerciallyavailable.Fordetailedinstallation

instructions,refertotheguidereceivedwiththerespectivebracket.• Tolessentheprobabilityofinjuryanddamageresultingfromfallofthedisplayincaseofearthquakeorothernaturaldisaster,besuretoconsultthe

bracketmanufacturerforinstallationlocation.

Ventilation Requirements for enclosure locatingToallowheattodisperse,leavespacebetweensurroundingobjectsasshowninthediagrambelow.

100 mm 100 mm

100 mm

100 mm

Page 10: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

3

1.5. Mounting in Portrait PositionThisdisplaycanbeinstalledinportraitposition.1. Removethetablestand,ifattached.2. Rotate90degreesclockwise.The“ ”logoshouldbeontheLEFTsidewhenfacingthedisplay.

90 90

1.5.1. How to use the logo guider for portrait position

1. Puttheguideronthelower-leftcornerofthefrontbezelofthedisplay.Folddownbothofitsedges.

2. Peelofftheprotectivefilmatthebackofthe“ ”logosticker.Holdandpresstheguiderwithyourlefthand.Putthe“ ”logostickerwithitsadhesivesidedownintothelogoholewithyourrighthand,andpresstomakeitsticktightlyontothefrontbezel.

3. Removetheguider.

1 2 3

1.5.2. How to remove the logo

1. Prepareapieceofpaperwithacuttingareaoflogoasaprotectortopreventthefrontbezelfromscratching.

2. Usingaknife,carefullyremovethelogostickerwiththepaperplacingbeneath.

3. Tearoffthelogosticker.

1 2 3

NOTE: Wheninstallingthedisplayonawall,pleaseconsultaprofessionaltechnicianforproperinstallation.Weacceptnoliabilityforinstallationsnotperformedbyaprofessionaltechnician.

Page 11: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

4

2. Parts and Functions

2.1. Control Panel

MUTE INPUT MENU

1 2 3 4 5 6 7 81

9

1 [ ] buttonPresstoswitchthedisplayonoroff.

2 [MUTE] buttonSwitchtheaudiomuteON/OFF.

3 [ ] buttonPresstoselectinputsource.

4 [ ] buttonPresstoincreasetheadjustmentwhileOSDmenuison,ortoincreasetheaudiooutputlevelwhileOSDmenuisoff.

5 [ ] buttonPresstodecreasetheadjustmentwhileOSDmenuison,ortodecreasetheaudiooutputlevelwhileOSDmenuisoff.

6 [ ] buttonPresstomovethehighlightbaruptoadjusttheselecteditemwhileOSDmenuison.

7 [ ] buttonPresstomovethehighlightbardowntoadjusttheselecteditemwhileOSDmenuison.

8 [ ] buttonPresstoaccesstheOSDmenu.

9 Remote control sensor and power status indicator• Receivescommandsignalsfromtheremotecontrol.

- Lightsgreenwhenthisdisplayisturnedon- Lightsredwhenthisdisplayisinstandbymode- Lightsoffwhenthemainpowerofthisdisplayisturnedoff

Page 12: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

5

2.2. Input/Output Terminals

INO

UT

INO

UT

8

1 2 3 4 5 6 7

LR

LR

9

101112131415

16

1 AC INACpowerinput.

2 MAIN POWER SWITCHMainpoweron/offswitch.

3 HDMI INHDMIvideo/audioinput.

4 DVI INDVI-Dvideoinput.

5 RJ-45LANcontrolfunctionfortheuseofremotecontrolsignalfromcontrolcenter.

6 VGA IN (D-Sub)VGAvideoinput.

7 COMPONENT IN (RCA)ComponentYPbPrvideosourceinput.

8 AUDIO IN (RCA)AudioinputfromexternalAVdevice.

9 AUDIO OUT (RCA)AudiosignaloutputtoconnectyourexternalAVdevice.

10 AUDIO IN (3.5mm)AudioinputfromyourPC.

11 SPDIF OUTDigitalaudiosignaloutputtoconnectyourexternalAVdevice.

12 IR OUT / 13 IR IN (3.5 mm)IRsignaloutput/inputfortheloop-throughfunction.

NOTES:• Thisdisplay’sremote controlsensorwillstopworkingifthejack

[IR IN]isconnected.• ToremotelycontrolyourA/Vdeviceviathisdisplay,referto

page9forIR Pass Throughconnection.

14 RS232C OUT / 15 RS232C IN (2.5 mm)RS232Cnetworkoutput/inputfortheloop-throughfunction.

16 USB PORTConnectyourUSBstoragedevice.

Page 13: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

6

2.3. Remote Control

2.3.1. General functions

1

14

15

16

10

2

3

4

5

6

7

8

9

11

10

12

13

1 POWER buttonSwitchthisdisplayonoroff.

2 PLAY buttonsControlplaybackofmediafiles.

3 SOURCE buttonSelectinputsource.Press[ ]or[ ]buttontoselectfromUSB,Network,HDMI,DVI,YPbPr,AV,orVGA.Press[ ]buttontoconfirmandexit.

4 HOME buttonAccesstheOSDmenu.

5 LISTNofunction.

6 NAVIGATION buttonsNavigatethroughmenusandselectitems.

7 buttonConfirmanentryorselection.

8 ADJUST buttonAccesscurrentlyavailableoptions,pictureandsoundmenus.

9 BACK buttonReturntothepreviousmenupageorexitfromthepreviousfunction.

10 VOLUME buttonAdjustvolume.

11 MUTE buttonPresstoturnthemutefunctionon/off.

12 COLOR buttonsSelecttasksoroptions.

13 NUMERIC buttonsEntertextfornetworksetting.

14 FORMAT buttonChangepictureformat.

15 INFO buttonDisplayinformationaboutcurrentactivity.

16 OPTIONSAccesscurrentlyavailableoptions,pictureandsoundmenus.

.

Page 14: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

7

2.3.2. Inserting batteries in the remote controlTheremotecontrolispoweredbytwo1.5VAAAbatteries.

Toinstallorreplacebatteries:1. Pressandthenslidethecovertoopenit.2. Alignthebatteriesaccordingtothe(+)and(–)indicationsinsidethe

batterycompartment.3. Replacethecover.

Caution:Theincorrectuseofbatteriescanresultinleaksorbursting.Besuretofollowtheseinstructions:• Place“AAA”batteriesmatchingthe(+)and(–)signsoneachbatterytothe(+)and(–)signsofthebatterycompartment.• Donotmixbatterytypes.• Donotcombinenewbatterieswithusedones.Itcausesshorterlifeorleakageofbatteries.• Removethedeadbatteriesimmediatelytopreventthemfromliquidleakinginthebatterycompartment.Don’ttouchexposedbatteryacid,asitcan

damageyourskin.

NOTE: Ifyoudonotintendtousetheremotecontrolforalongperiod,removethebatteries.

2.3.3. Handling the remote control• Donotsubjecttostrongshock.• Donotallowwaterorotherliquidtosplashtheremotecontrol.Iftheremotecontrolgetswet,wipeitdryimmediately.• Avoidexposuretoheatandsteam.• Otherthantoinstallthebatteries,donotopentheremotecontrol.

2.3.4. Operating range of the remote control

Pointthefrontoftheremotecontroltowardthisdisplay’sremotecontrolsensorwhenpressingabutton.Usetheremotecontrolwithinadistanceoflessthan10m/33ftfromthisdisplay’ssensor,andahorizontalandverticalangleoflessthan30degrees.

NOTE: Theremotecontrolmaynotfunctionproperlywhentheremotecontrolsensoronthisdisplayisunderdirectsunlightorstrongillumination,orwhenthereisanobstacleinthepathofsignaltransmission.

30 30

Page 15: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

8

3. ConnectionNOTE: Theperipheralsandcablesshownareforexamplepurposesonly.

3.1. Connecting External Equipments

DVD / VCR / VCD

PC

STEREO AMPLIFIER

COMPONENT OUT (YPbPr)

AU

DIO

OU

T

DV

I OU

T

VG

A O

UT

USB

AUDIO OUT

AUDIO IN

HDMI OUT

AC IN

Y Pb Pr

R

L

R

L

USB

AUDI

O OU

TU

SB

RS

232C IN

OU

T

IR

INO

UT

AUDI

O IN

PC LI

NEIN

SPDI

F

HDMI IN DVI IN RJ-45 VGA IN COMPONENT IN

Page 16: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

9

3.2. Connecting Multiple Displays

3.2.1. RS232C control connection (optional)

PC

DISPLAY 1 DISPLAY 2

[RS232C IN]

[RS-232C]

[RS232C OUT] [RS232C IN] [RS232C OUT]

3.2.2. IR connection (optional)

DISPLAY 1 DISPLAY 2

[IR IN] [IR OUT] [IR IN]External

IR Receiver [IR OUT]

NOTE: Thisdisplay’sremotecontrolsensorwillstopworkingifthe[IR IN]isconnected.

3.3. IR Pass-through Connection (optional)

DISPLAYDVD / VCR / VCD

(DVD / VCR / VCD)

(BDL4235EL)

Remote Control

[IR OUT]

[IR IN]

Page 17: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

10

3.4. Wire-connecting to Network (optional)Ifyouconnectthisdisplaytoahomenetwork,youcanplayphotos,musicandvideosfromyourcomputer.SeePlay multimedia files (Page11)formoredetail.

PC

[RJ-45][RJ-45] ROUTER

INTERNET

To setup the network:1. SwitchontherouterandswitchonitsDHCPsetting.2. ConnecttheroutertothisdisplaywithanEthernetcable.3. Press buttonontheremotecontrol,thenselect{Setup}.4. Select{Connect to network},thenpress button.5. Followtheon-screeninstructionstoinstallthenetwork.6. Waitforthisdisplaytofindthenetworkconnection.7. Ifyouareprompted,agreetothe“End User Licence Agreement”.

NOTE: ConnectingwithashieldedCAT-5EthernetcabletocomplywiththeEMCdirective.

Page 18: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

11

4. OperationNOTE: Thecontrolbuttondescribedinthissectionismainlyonthe

remotecontrolunlessspecifiedotherwise.

4.1. Watch the Connected Video SourceSeepage8forexternalequipmentsconnection.1. Press button.2. Press or buttontoselectadevice,thenpress button.

4.2. Change Picture FormatYoucanchangethepictureformattosuitthevideosource.Eachvideosourcehasitsavailablepictureformats.Theavailablepictureformatsdependonthevideosource:1. Press button.2. Press or buttontoselectapictureformat,thenpress button.

• {Auto zoom}:Enlargethepicturetofillthescreen.RecommendedforminimalscreendistortionbutnotforHDorPC.

• {Movie expand 16:9}:Scale4:3formatto16:9.NotrecommendedforHDorPC.

• {Wide screen}:Showswidescreenformatcontentunstretched.NotrecommendedforHDorPC.

• {Unscaled}:ProvidemaximumdetailforPC.OnlyavailablewhenPCmodeisselectedinthe{Picture}menu.

• {4:3}:Displaytheclassic4:3format.

4.3. Select your Preferred Picture Settings1. Whilethisdisplayisplayingvideosource,press

button.2. Press or buttontoselect

,thenpress button.3. Press or buttontoselectanoption,thenpress button:

• {Personal}:Applyyourpersonalisedpicturesettings.• {Vivid}:Richanddynamicsettings,idealfordaytimeviewing.• {Natural}:Naturalpicturesettings.• {Standard}:Defaultsettingsthatsuitmostenvironmentsand

typesofvideo.• {Movie}:Idealsettingsformovies.• {Photo}:Idealsettingsforphotos.• {Energy saving}:Settingsthatconservethemostenergy.

4.4. Select your Preferred Sound Settings1. Whilethisdisplayisplayingvideosource,press

button.2. Press or buttontoselect

,thenpress button.3. Press or buttontoselectanoption,thenpress button:

• {Personal}:Applyyourpersonalisedsoundsettings.• {Original}:Settingsthatsuitmostenvironmentsandtypesof

audio.• {Movie}:Idealsettingsformovies.• {Music}:Idealsettingsforlisteningtomusic.• {Game}:Idealsettingsforgames.

• {News}:Idealsettingsforspokenaudio,suchasthenews.

4.5. Play Multimedia FilesYoucanplayvideos,photos,andmusiconyourdisplayfrom:• Yourcomputerconnectedthroughyourhomenetwork.• AUSBdeviceconnectedtothisdisplay.

4.5.1. Play Multimedia files via Local Area Network

Toplayfilesfromcomputer,youwillneed:• Awiredhomenetwork,connectedwithaUniversalPlugandPlay

(uPnP)router.• Optional:ALANcablethatconnectsyourdisplaytoyourhome

network.• Amediaserverrunningonyourcomputer.• Appropriatesettingsonyourcomputerfirewalltoallowyoutorun

themediaserver.

Set up the network1. Connectyourdisplayandthecomputertothesamehomenetwork.

Seepage10forconnectingyourdisplaytoanetwork.2. Switchonyourcomputerandtherouter.

NOTE: IftheapparatusdoesnotreturntoDLNAmodeduetoexternalelectricaldisturbances(e.g.electrostaticdischarge),userinterventionisrequired.

Single Display Setup

PC

[RJ-45][RJ-45] ROUTERor

Multiple Displays Setup

PC

[RJ-45][RJ-45] ROUTER

[RJ-45]

or

4.5.2. Play files from display.

Set up media sharing1. Installamediaserveronyourcomputertosharemediafiles.These

aresomemediaservers:• ForPC:WindowsMediaPlayer11(orhigher)orTVersity• ForMac:Twonky

2. Switchonmediasharingonyourcomputerusingthemediaserver.Formoreinformationonhowtosetupthemediaserver,refertothewebsiteofthemediaserver.

Page 19: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

12

Play files 1. Press button.2. Select[Browse network],thenpress button.3. Selectafilefromthecontentbrowser,thenpress buttonto

startplaying.4. PressthePlay buttonsontheremotecontroltocontrolplaying.

Tips:• Selectthetopbartofilteryourfilesbytype.• Select[Sort]toarrangethefilesbyalbumname,artist,orother

fields.• Toclearthelistofofflinemediaservers,press

button,thenselect[Clear offline servers]andpress button.

4.5.3. Play multimedia files from USB deviceThisdisplaycanplaymusic,movie,orphotofilesfromyourUSBdevice.1. ConnectyourUSBdevicetotheUSBportonthisdisplay.

AUDI

O OU

TU

SB

RS

232C IN

OU

T

IR

INO

UT

AUDI

O IN

PC LI

NEIN

SPDI

F

USB

2. Press button,selectUSB,thenpress button.3. TheconnectedUSBdeviceisdetectedautomaticallyforallits

playablefiles,whichwillbeautomaticallysortedinto3types:, ,and .

Help

4. Pressthe BACKbuttontogouptothetoplayerinthescreen.Press buttontoselectthefiletype.Press buttontoenteritsplaylist.

5. Selectthefileyouwant.Press buttontostartplaying.6. Followtheon-screeninstructiontocontroltheplayoption.7. PressthePLAYbuttons(H F G I J)tocontrolplaying.

Supported file system: • FAT32

Supported file format: • Music:MP3,WMA,M4A,AAC,AC3• Movie:AVI,MP4,MOV,RM/RMVB• Photo:JPEG,BMP,GIF

Caution:• ThemanufacturerisnotresponsibleiftheUSBdeviceisnot

supported,norisitresponsiblefordamagetoorlossofdatainthedevice.

• DonotoverloadtheUSBport.IfyouconnectaUSBstoragedevicethatconsumesmorethan500mApower,makesurethatitisconnectedtoitsownexternalpowersupply.

4.6. Play options

4.6.1. Playing music files1. SelectMusic inthetopbar.

2. Selectonemusictrack,thenpress button.

HelpUSB deviceSortPlay All OptionsInfo

05:051. Funky music

• Toplayallthetracksinafolder,selectonemusicfile,thenselect{Play All}.

• Toskiptothenextorprevioustrack,press or button.

• Topausethetrack,press button.Press buttonagaintoresumeplayback.

• Toskipbackwardorforward10seconds,press or button.• Tosearchbackwardorforward,pressG or Jbutton,

pressrepeatedlytotogglebetweendifferentspeeds.• Tostopthemusic,pressHbutton.

Music options Whileyouplaymusic,press button,thenpress buttontoselectanoption:• {Repeat}:Select{Repeat}toplayatrackoranalbumrepeatedly,or

select{Playonce}toplayatrackonce.• {Media Server}:Whenyouplaycontentfromamediaserver,you

canselectanothermediaserver.• {Shuffle On}/{Shuffle Off}:Enableordisablerandomplayoftracks.

Page 20: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

13

NOTE:Toviewinformationaboutasong(forexample,title,artistorduration),selectthesong,thenpress button.Tohidetheinformation,press buttonagain.

4.6.2. Playing movie files1. SelectMovie inthetopbar.

2. Selectavideo,thenpress button.

HelpUSB devicePlay All OptionsInfo

The Movie11:22:3388.88MB2013-05-05

The Movie11:22:3388.88MB2013-05-05

The Movie11:22:3388.88MB2013-05-05

The Movie11:22:3388.88MB2013-05-05

The Movie11:22:3388.88MB2013-05-05

• Toplayallthevideosinafolder,selectonevideofile,thenselect{Play All}.

• Toskiptothenextorpreviousvideo,press or button.

• Topausethevideo,press button.Press buttonagaintoresumeplayback.

• Toskipbackwardorforward10seconds,press or button.• Tosearchbackwardorforward,pressG or Jbutton,

pressrepeatedlytotogglebetweendifferentspeeds.• Tostopthevideo,pressHbutton.

Movie options Whileplayingvideo,press button,thenpress buttontoselectanoption:• {Subtitles}:Selecttheavailablesubtitlesettings.• {Subtitle Language}:Selectthelanguageforsubtitlesifavailable.• {Character Set}:Selectthecorrectcharactersetforthesubtitles.• {Audio Language}:Selectanaudiolanguage.• {Repeat}:Select{Repeat}toplaythevideofilerepeatedlyor{Play

once}toplaythevideofileonce.• {Media server}:Whenyouplaycontentfromamediaserver,you

canselectanothermediaserver.• {Shuffle On}/{Shuffle Off}:Enableordisablerandomplayofvideo

files.• {DivX(R) VOD}:DisplaytheDivXregistrationandderegistration

codesforthisdisplay.

NOTE:Toviewinformationaboutavideo(forexample,playedposition,duration,title,ordate),selectthevideo,thenpress button.Tohidetheinformation,press buttonagain.

4.6.3. Playing photo files1. SelectPhoto inthetopbar.

2. Selectaphotothumbnail,thenpress button.

HelpUSB deviceSortPlay All OptionsInfo

Start a slideshow Iftherearemultiplephotosinafolder,selectaphoto,thenselect{Play All}.• Toskiptothepreviousornextphoto,press or button,and

thenpress button.• Tostoptheslideshow,pressHbutton.

Slideshow options Whileyouplayaslideshow,press button,thenpress

buttontoselectanoption:• {Shuffle Off}/{Shuffle On}:Enableordisablerandomdisplayof

picturesintheslideshow.• {Repeat}:Select{Repeat}towatchaslideshowrepeatedlyor{Play

once}towatchonce.• {Slideshow Time}:Selectthedisplayingtimeforeachphotointhe

slideshow.• {Slideshow Transitions}:Selectthetransitionfromonephototothe

next.• {Media Server}:Whenyouplaycontentfromamediaserver,you

canselectanothermediaserver.

Page 21: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

14

5. Change your settingsUsing the remote control:

1. Press buttontodisplaytheOSDmenu.

2. Press ,or buttontoselect{Setup}.Press buttontoenter.

SetupSource

3. Press , , ,or buttontoselect{Quick picture and sound},{Settings},{Connect to network},or{Network settings}.Press buttontoenter.

Connect to networkQuick picture and

sound

Network settingsSettings

4. Press , , ,or buttontoselectitsmenuitemortoadjustitsvalue.Press buttontoconfirm.

5. Press buttontogobacktothepreviousmenulayer.6. Press buttontoexittheOSDmenu.

Using this display’s control buttons:

MUTE INPUT MENU

1. Press buttontodisplaytheOSDmenu.2. Press[ ][ ][ ]or[ ]buttontoselectmenuitemoradjustits

value.3. Press buttontoconfirmmenuselectionandenterits

submenu.4. Press buttontoexittheOSDmenu.

5.1. Quick Picture and SoundYoucanselectpictureandsoundsettingswiththehelpofthesettingsassistant,whichdemonstratestheeffectofyourchosensettingimmediately.

1. Press buttontodisplaytheOSDmenu.

2. Select{Setup}.Press button.3. Select{Quick picture and sound}.Press button.4. Select{Continue},thenpress button5. Followtheon-screeninstructionstochooseyourpreferredsettings.

5.2. Settings

5.2.1. Picture menu

Picture styleRestore styleBacklight contrastColourSharpnessNoise reductionMPEG artifact reducti...Digital Crystal ClearAdvancedGame or computerForamat and edges

PictureSoundGeneral settings

Picture styleSelectapredefinedpicturesetting.

Page 22: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

15

Restore styleRestorethelast-selectedpredefinedpicturesetting.

Backlight contrast Adjustthebrightnessofthisdisplay’sbacklight.

ColourAdjustthecoloursaturationofthepicture.

SharpnessAdjustthesharpnessofthepicture.

Noise reductionSelecttheamountofnoisereductionforthepicture.

MPEG artifact reductionSmoothentransitionsandhazinessinthedigitalpicture.

Digital Crystal ClearFine-tuneeachpixeltomatchsurroundingpixelsandproduceabrilliant,high-definitionimage.

• {Advanced sharpness}:Enablesuperiorsharpness,especiallyonlinesandcontoursinthepicture

• {Dynamic contrast}:Dynamicallyenhancethedetailsinthedark,mediumandlightareasofthepicture.

• {Dynamic backlight}:Selectabacklightleveltooptimisedynamicpowerconsumptionandpicturecontrast.

• {Colour enhancement}:Dynamicallyenhancethevividnessanddetailsofcolours.

AdvancedAccessadvancedsettingssuchasgamma,tintsettingsandvideocontrastsettings.

• {Gamma}:Adjustthenon-linearsettingforpictureluminanceandcontrast.

• {Tint}:Changethecolourbalance.• {Custom tint}:Customisecolourbalancesetting.Onlyavailable

if{Tint}{Custom}isselected.• {Video contrast}:Adjustvideocontrast.• {Brightness}:Adjustscreenbrightness.

Game or computerWhenviewingcontentfromaconnectedgameconsole,select{Game}toapplygamesettings.WhenacomputerisconnectedthroughHDMI,select{Computer}.Makesurethat{Format and edges}{Picture format}{Unscaled}isselectedsoastoviewmaximumdetail.

Format and edgesAccessadvancedsettingstocontrolthedisplayingformatofthepicture.

• {Picture format}:Changethepictureformat.• {Screen edges}:Changethepicturesize.• {Picture shift}:Ifavailable,movethepositionofthepicture.

5.2.2. Sound menu

Sound styleRestore styleBassTrebleSurround modeAudio outAdvanced

PictureSoundGeneral settings

Sound styleAccesspredefinedsoundsettings.

Restore styleRestorethelast-selectedpredefinedsoundsetting.

BassAdjustthebasslevelofthespeakerandheadphones.

TrebleAdjustthetreblelevelofthespeakerandheadphones.

Surround modeSelectasurroundsoundmodetoenhanceyouraudioexperience.

Audio outAdjustaudiooutputvolume.

AdvancedAccessadvancedsettingstoenhanceyouraudioexperience.

• {Auto volume leveling}:Enablethereductionofsuddenvolumechanges.

• {Speaker settings}:Turnonorofftheinternalspeakers.• {Clear sound}:Enhancesoundquality.• {Audio out format}:Selectthetypeofaudiooutputthrough

thedigitalaudiooutputconnector.• {Audio out leveling]:Settheoutputlevelforstereoaudio.

Select{Less}foracertainamountoflossinintensityorsignalstrength.Select{More}fornolossinintensityorsignalstrength.

• {Audio out delay}:Automaticallysynctheimageonthisdisplaytotheaudiofromaconnectedhometheatre.

• {Audio out offset}:Adjustthesettingforaudiooutputdelay.Availableif{Audio out delay}isswitchedon.

Page 23: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

16

5.2.3. General settings menu

Menu languageMonitor idEco modeAuto searchClockUSB schedulingSleep timerAuto switch offLocal KB lockRC lockFactory settings

PictureSoundGeneral settings

Menu languageSelectlanguageusedforOSDmenus.

Monitor idSettheIDnumberforcontrollingthisdisplayviatheRS232Cconnection.EachdisplaymusthaveauniqueIDnumberwhenmultiplesetsofthisdisplayareconnected.

Eco modeSetthisdisplaytoreducethepowerconsumptionautomatically.

Auto searchChoosetoletthisdisplaydetectanddisplayavailablesignalsourcesautomatically.

ClockAdjustclocksettings.

USB schedulingThisfunctionallowsyoutoprogramupto3differentscheduledtimeintervalsforthisdisplaytoactivate,andautoplayUSBmediafileofyoursetting.Afterchangingthe{Clock}optioninthe{General settings}menu,youneedtosetthis{USB scheduling}again.

Sleep timerSwitchoffthisdisplayafteraspecifiedtime.

Auto switch offSetthetimeforthisdisplaytobeswitchedoffafteraperiodofnoactivity.Pressanykeyontheremotecontroltodisablethisfunction.

Local KB lockChoosetoenableordisablethekeyboard(controlbuttons)functionofthisdisplay.• {Unlock}:Enablethekeyboardfunction.• {Lock all}:Lockallkeyboardfunction.• {Lock but volume}:Disableallthekeyboardfunctionexceptthe

and button.• {Lock but power}:Disableallthekeyboardfunctionexceptthe

button.

RC lockChoosetoenableordisablethebuttonfunctionoftheremotecontrol.• {Unlock}:Enablethebuttonfunction.• {Lock all}:Lockallbuttonfunction.

• {Lock but volume}:Disableallthebuttonfunctionexceptthe button.

• {Lock but power}:Disableallthebuttonfunctionexceptthe button.

NOTE:Todisablethelockfunctionfrom[Local KB lock]or[RC lock]item,pressbuttons 1 9 9 8 ontheremotecontrol.

Factory settingsResetallyourcustomizedsettingstothefactorydefaults.

5.3. Network Settings

View network settingsNetwork settingsStatic IP ConfigurationDigital Media Renderer ..

View network settingsViewconnectednetworkstatus.

Network settingsSelecthowthisdisplayshouldassignaddressestothenetworkresources.

Static IP ConfigurationAssign{IP address},{Netmask},{Gateway},{DNS1},and{DNS2}forthisdisplay.

Digital Media Renderer - DMRReceivemultimediafilesfromSmartPhonesorTabletsconnectedtoyournetwork.

Page 24: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

17

6. Input modePC Resolution:

StandardResolution

ActiveResolutionRefreshRate PixelRate AspectRatio StandforMode

HPixels VLines

VGA 640480 60Hz 25.175MHz

4:3 VideoGraphicArray480 72Hz 31.5MHz480 75Hz 31.5MHz

WVGA 720 400 70Hz 33.75MHz 16:9 WideVideoGraphicArray

SVGA 800600 60Hz 40MHz

4:3 SuperVGA600 75Hz 49.5MHz

XGA 1024768 60Hz 65MHz

4:3 ExtendedGraphicArray768 75Hz 78.75MHz

WXGA 1280 768 60Hz 79.5MHz 5:3 WideXGAWXGA 1280 800 60Hz 79.5MHz 16:10 WideXGASXGA 1280 1024 60Hz 108MHz 5:4 SuperXGAWXGA 1360 768 60Hz 85.5MHz 16:9 WideXGAUXGA 1600 1200 60Hz 162MHz 4:3 UltraXGAHD1080 1920 1080 60Hz 148.5MHz 16:9 HD1080

SDTV Resolution:

StandardResolution

ActiveResolutionRefreshRate PixelRate AspectRatio StandforMode

HPixels VLines480i

720 48029.97Hz 13.5MHz

4:3 ModifiedNTSCStandard480p 59.94Hz 27MHz576i

720 48025Hz 13.5MHz

4:3 ModifiedPALStandard576p 50Hz 27MHz

HDTV Resolution:

StandardResolution

ActiveResolutionRefreshRate PixelRate AspectRatio StandforMode

HPixels VLines

720p 1280 72050Hz

74.25MHz 16:9 NormallyDVBMode60Hz

1080i 1920 108025Hz

74.25MHz 16:9 NormallyATSCMode30Hz

1080p 1920 108050Hz

148.5MHz 16:9 NormallyATSCMode60Hz

• ThePCtextqualityisoptimuminHD1080mode(1920×1080,60Hz).• YourPCdisplayscreenmightappeardifferentdependingonthemanufacturer(andyourparticularversionofWindows).• CheckyourPCinstructionbookforinformationaboutconnectingyourPCtoadisplay.• Ifaverticalandhorizontalfrequency-selectmodeexists,select60Hz(vertical)and31.5KHz(horizontal).Insomecases,abnormalsignals(suchas

stripes)mightappearonthescreenwhenthePCpoweristurnedoff(orifthePCisdisconnected).Ifso,pressthe[ ]buttontoenterthevideomode.Also,makesurethatthePCisconnected.

• WhenhorizontalsynchronoussignalsseemirregularinRGBmode,checkPCpowersavingmodeorcableconnections.• ThisdisplaysettingstablecompliestotheIBM/VESAstandards,andbasedontheanaloginput.• TheDVIsupportmodeisregardedassametothePCsupportmode.• Thebesttimingfortheverticalfrequencytoeachmodeis60Hz.

Page 25: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

18

7. Pixel Defect PolicyWestrivetodeliverthehighestqualityproductsandusesomeoftheindustry’smostadvancedmanufacturingprocesseswhilstpracticingstringentqualitycontrol.However,pixelorsub-pixeldefectsonthePDP/TFTpanelsusedinPlasma-&LCD-displaysaresometimesunavoidable.Nomanufacturercanguaranteethatallpanelswillbefreefrompixeldefects,butPhilipsguaranteesthatanyPlasma-&LCD-displayswithanunacceptablenumberofdefectswillberepairedduringthewarrantyperiodinlinewithyourlocalguaranteeconditions.ThisnoticeexplainsthedifferenttypesofpixeldefectsanddefinestheacceptabledefectlevelfortheLCDscreen.Inordertoqualifyforrepairunderwarranty,thenumberofpixeldefectsmustexceedacertainlevelasshowninthereferencetable.IftheLCDscreeniswithinspecificationawarrantyexchange/claimbackwillberefused.Additionally,becausesometypesorcombinationsofpixeldefectsaremorenoticeablethanothers,Philipssetsevenhigherqualitystandardsforthose.

7.1. Pixels and Sub-pixels

subpixel

pixel

Apixel,orpictureelement,iscomposedofthreesub-pixelsintheprimarycolorsofred,greenandblue.Manypixelstogetherformanimage.Whenallsub-pixelsofapixelarelit,thethreecoloredsub-pixelstogetherappearasasinglewhitepixel.Whenallaredark,thethreecoloredsub-pixelstogetherappearasasingleblackpixel.Othercombinationsoflitanddarksub-pixelsappearassinglepixelsofothercolors.

7.2. Types of Pixel Defects + Dot DefinitionPixelandsub-pixeldefectsappearonthescreenindifferentways.Therearethreecategoriesofpixeldefectsandseveraltypesofsub-pixeldefectswithineachcategory.

Dot definition = What is a defective “Dot”? :Oneormoredefective,adjacentsub-pixelaredefinedasone“dot”.Theno.ofdefectivesub-pixelsarenotrelevanttodefineadefectivedot.Thismeansthatadefectivedotcanconsistofone,twoorthreedefectivesub-pixelswhichcanbedarkorlit.

RR G B

Onedot=OnePixel;consistsofthreesub-pixelsofRed,Green,andBlue.

7.3. Bright Dot DefectsBrightdotdefectsappearaspixelsorsub-pixelsthatarealwayslitor“on”.Thesearetheexamplesofbrightdotdefects:

Onelitred,greenorbluesubpixel Twoadjacentlitsubpixels:Red+Blue=PurpleRed+Green=YellowGreen+Blue=Cyan(LightBlue)

Threeadjacentlitsubpixels(onewhitepixel)

Page 26: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

19

7.4. Dark Dot DefectsBlackdotdefectsappearaspixelsorsub-pixelsthatarealwaysdarkor“off ”.Thesearetheexamplesofblackdotdefects:

Onedarkdot Twoadjacentdarkdots=1pairofdarkdots Twodarkdots,specificationsdefinestheminimumdistancebetweendarkdots

7.5. Proximity of Pixel DefectsBecausepixelandsub-pixelsdefectsofthesametypethatarenearbyoneanothermaybemorenoticeable,Philipsalsospecifiestolerancesfortheproximityofpixeldefects.Inthetablebelowyoucanfindspecificationsabout:

• Allowedamountofadjacentdarkdots=(adjacentdarkdots=1pairofdarkdots)• Minimumdistancebetweendarkdots• Totalno.ofalldefectivedots

7.6. Pixel Defect TolerancesInordertoqualifyforrepairduetopixeldefectsduringthewarrantyperiod,aPDP/TFTpanelinaPhilipsPlasma/LCD-displaymusthavepixelorsub-pixeldefectsexceedingthetoleranceslistedinthefollowingtable.

BRIGHTDOTEFFECT ACCEPTABLELEVEL1litsubpixel 2BLACKDOTEFFECT ACCEPTABLELEVEL1darksubpixel 10TOTALDOTDEFECTSOFALLTYPES 12

NOTE: *1or2adjacentsubpixeldefects=1dotdefect

7.7. MURADarkspotsorpatchesmayoccasionallyappearonsomeliquidcrystaldisplay(LCD)panels.ThisisknownwithintheindustryasMura,whichisaJapanesetermfor“unevenness.”Itisusedtodescribeanirregularpatternorareainwhichunevenscreenuniformityappearsundercertainconditions.Muraisaresultofthedeteriorationoftheliquidcrystalalignmentlayerandismostcommonlycausedbylong-termoperationunderhighambienttemperatures.Itisanindustry-widephenomenonandMuraisnotrepairable.Itisalsonotcoveredbyourwarrantyterms.MurahasbeenaroundsincetheintroductionofLCDtechnologyandwithscreensgettingbiggerandinoperation24/7,manydisplaysarerunninginlowlightconditions.ThisalladdstothepossibilityofMuraaffectingdisplays.

HOW TO SPOT MURATherearemanysymptomsofMuraandalsomultiplecauses.Severalofthesearelistedbelow:

• Impuritiesorforeignparticlesinthecrystalmatrix• UnevendistributionofLCDmatrixduringmanufacturing• Non-uniformluminancedistributionofthebacklight• Panelassemblyinducedstress• FlawswithintheLCDcells• Thermalinducedstress–hightemperatureoperationoverlongperiodsoftime

HOW TO AVOID MURAAlthoughwecannotguaranteethecompleteeradicationofMuraeverytime,ingeneraltheappearanceofMuracanbeminimizedbythesemethods:

• Lowerthebacklightbrightness• Useascreensaver• Reducetheambienttemperaturearoundtheunit

Page 27: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

20

8. Cleaning and Troubleshooting

8.1. Cleaning

Caution When Using the Display• Donotbringyourhands,faceorobjectsclosetotheventilationholesofthedisplay.Thetopofthedisplayisusuallyveryhotduetothehigh

temperatureofexhaustairbeingreleasedthroughtheventilationholes.Burnsorpersonalinjuriesmayoccurifanybodypartsarebroughttooclose.Placinganyobjectnearthetopofthedisplaycouldalsoresultinheatrelateddamagetotheobjectaswellasthedisplayitself.

• Besuretodisconnectallcablesbeforemovingthedisplay.Movingthedisplaywithitscablesattachedmaydamagethecablesandthuscausefireorelectricshock.

• Disconnectthepowerplugfromthewalloutletasasafetyprecautionbeforecarryingoutanytypeofcleaningormaintenanceprocedure.

Front Panel Cleaning Instructions• Thefrontofthedisplayhasbeenspeciallytreated.Wipethesurfacegentlyusingonlyacleaningclothorasoft,lint-freecloth.• Ifthesurfacebecomesdirty,soakasoft,lint-freeclothinamilddetergentsolution.Wringtheclothtoremoveexcessliquid.Wipethesurfaceof

thedisplaytoremovedirt.Thenuseadryclothofthesametypetodry.• Donotscratchorhitthesurfaceofthepanelwithfingersorhardobjectsofanykind.• Donotusevolatilesubstancessuchasinsertsprays,solventsandthinners.

Cabinet Cleaning Instructions• Ifthecabinetbecomesdirty,wipethecabinetwithasoft,drycloth.• Ifthecabinetisextremelydirty,soakalint-freeclothinamilddetergentsolution.Wringtheclothtoremoveasmuchmoistureaspossible.Wipe

thecabinet.Useanotherdryclothtowipeoveruntilthesurfaceisdry.• Donotallowanywaterordetergenttocomeintocontactwiththesurfaceofthedisplay.Ifwaterormoisturegetsinsidetheunit,operating

problems,electricalandshockhazardsmayresult.• Donotscratchorhitthecabinetwithfingersorhardobjectsofanykind.• Donotusevolatilesubstancessuchasinsertsprays,solventsandthinnersonthecabinet.• DonotplaceanythingmadefromrubberorPVCnearthecabinetforanyextendedperiodsoftime.

Page 28: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

21

8.2. Troubleshooting

Symptom Possible Cause Remedy

No picture is displayed 1. Thepowercordisdisconnected.2. Themainpowerswitchonthebackofthe

displayisnotswitchedon.3. Theselectedinputhasnoconnection.4. Thedisplayisinstandbymode.

1. Pluginthepowercord.2. Makesurethepowerswitchisswitchedon.3. Connectasignalconnectiontothedisplay.

Interference displayed on the display or audible noise is heard

Causedbysurroundingelectricalappliancesorfluorescentlights.

Movethedisplaytoanotherlocationtoseeistheinterferenceisreduced.

Color is abnormal Thesignalcableisnotconnectedproperly. Makesurethatthesignalcableisattachedfirmlytothebackofthedisplay.

Picture is distorted with abnormal patterns 1. Thesignalcableisnotconnectedproperly.2. Theinputsignalisbeyondthecapabilitiesof

thedisplay.

1. Makesurethatthesignalcableisattachedfirmly.

2. Checkthevideosignalsourcetoseeifitisbeyondtherangeofthedisplay.Pleaseverifyitsspecificationswiththisdisplay’sspecificationsection.

Display image doesn’t fill up the full size of the screen

Thezoommodeisnotcorrectlyset. UsetheZoommodeorCustomzoomfunctionintheScreenmenutofinetunedisplaygeometryandtimefrequencyparameter.

Can hear sound, but no picture Improperlyconnectedsourcesignalcable. Makesurethatbothvideoinputsandsoundinputsarecorrectlyconnected.

Can see picture but no sound is heard 1. Improperlyconnectedsourcesignalcable.2. Volumeisturnedallthewaydown.3. [MUTE]isturnedon.4. Noexternalspeakerconnected.

1. Makesurethatbothvideoinputsandsoundinputsarecorrectlyconnected.

2. Press[ ]or[ ]buttontohearsound.3. SwitchMUTEoffbyusingthe [ ]

button.4. Connectexternalspeakersandadjustthe

volumetoasuitablelevel.

Some picture elements do not light up Somepixelsofthedisplaymaynotturnon. Thisdisplayismanufacturedusinganextremelyhighlevelofprecisiontechnology:however,sometimessomepixelsofthedisplaymaynotdisplay.Thisisnotamalfunction.

After-Images can still be seen on the display after the display is powered off. (Examples of still pictures include logos, video games, computer images, and images displayed in 4:3 normal mode)

Astillpictureisdisplayedforanoverextendedperiodoftime

Donotallowastillimagetobedisplayedforanextendedperiodoftimeasthiscancauseapermanentafter-imagetoremainonthedisplay.

Page 29: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

BDL4235DL

22

9. Technical SpecificationsDisplay:Item SpecificationsScreenSize(ActiveArea) 42”(viewable41.92”/106.48cm)AspectRatio 16:9NumberofPixels 1920(H)×1080(V)PixelPitch 0.4833(H)×0.4833(V)[mm]DisplayableColors 16.7MillioncolorsBrightness 400cd/m²ContrastRatio(Typical) 1000:1ViewingAngle 178degrees

In/Out Terminals:Item SpecificationsSpeakerOutput InternalSpeakers 7W(L)+7W(R)[RMS]/8Ω,1Way1SpeakerSystem

82dB/W/M/160Hz~13KHzAudioOutput RCAJack×2 0.5V[rms](Normal)/2Channel(L+R)AudioInput 3.5mmStereo×1

RCAJack×20.5V[rms](Normal)/2Channel(L+R)

RS232CInput/Output 2.5mm×2 TXD+RXD(1:1)LAN RJ-45Jack×1(8pin) 10/100LANPortHDMIInput HDMIJack×1

(TypeA)(19pin)DigitalRGB:TMDS(Video+Audio)MAX: Video:720p,1080p,1920×1080/60Hz(WUXGA)

Audio:48KHz/2Channel(L+R)SupportsLPCMonly

DVI-DInput DVI-Djack DigitalRGB:TMDS(Video)VGAInput D-SubJack×1(15pin) AnalogRGB:0.7V[p-p](75Ω),H/CS/V:TTL(2.2kΩ),SOG:1V[p-p](75Ω)

MAX:720p,1080p,1920×1080/60Hz(WUXGA)ComponentInput RCAJack×3 Y:1V[p-p](75Ω),Pb:0.7V[p-p](75Ω),Pr :0.7V[p-p](75Ω)

MAX:480i,576i,480p,576p,720p,1080i,1080pSPDIFOutput SPDIFPort SerialdigitalaudiooutputwheninputisHDMIIRInput/Output 3.5mm×2 IRpassthroughorIRdaisychainUSBInput USB×1(TypeA) USB2.0,forflashdisk

General:Item SpecificationsPowerInput 100-240V 50-60Hz,2.5AMaxPowerConsumption(Max.) 106WPowerConsumption(Typical) 80WPowerConsumption(EPA6.0) 51.5WPowerConsumption(Standby&Off) <0.5WDimensions[W×H×D] 991.6×584.0×113.9mmWeight 15.21KgGrossWeight 21.1Kg

Environmental Condition:Item Specifications

TemperatureOperational 5~40°CStorage -20~60°C

HumidityOperational 20~80%RH(Nocondensation)Storage 10~90%RH(Nocondensation)

AltitudeOperational 0~3,000mStorage/Shipment 0~9,000m

Page 30: User Manual (English) - Full Compass Systems · an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known

© 2013 Koninklijke Philips N.V. All rights reserved.

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.

Specifications are subject to change without notice.