User Manual - EnGenius · 2017. 6. 26. · Industry Canada Statement.....137. 5 Chapter 1 Product Overview. 6 Maximum data rates are based on draft IEEE 802.11ac ... VPN Server (PPTP/L2TP)

1

User Manual

IoT Gateway with High Performance

EPG5000version 1.0

Internet of Things

2

IMPORTANT

To install this router, please refer to the Quick Start Guide included in the product packaging.

To activate and use EnShare™ refer to the document “Using EnShare” also in the product packaging.

3

Chapter 1 Product Overview..............................................................5 Key Features....................................................................................................6 Technical Specifications/Software Features...................................8 Physical Interface..........................................................................................9

Chapter 2 Controlling the Router Through Its Web Configuration Interface...........................................................10 Logging In.....................................................................................................11 ViewingtheWebConfigurationDashBoard..................................12 Home Page...................................................................................................13 WebMenusOverview...............................................................................14 Internet.................................................................................................15 Wireless2.4GHz..........................................................................................16 Wireless5GHz...............................................................................................17 Parental Controls.......................................................................................18 GuestNetwork.............................................................................................19 IPv6.... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Firewall...................................................................................21 VPN.... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 USBPort..........................................................................................................23 Advanced.......................................................................................................24 Tools................................................................................................................26

Chapter 3 Installation Setup Wizard..............................................27 InternetSetupWizard...............................................................................28 SettingUpYourInternetConnection.................................................29 SettingYourWirelessSecurity..............................................................30 SettingyourRouter’sAdministratorPassword.............................31 Setting your Router’s Time Zone........................................................32 StatusandSaveSettings.......................................................................34

Chapter 4 Basic Network Settings.................................................35 NetworkSettings.......................................................................................36 Status.............................................................................................................37 WANSettings...............................................................................................38 LANSettings................................................................................................39 WLANSettings............................................................................................40 GuestNetwork............................................................................................41 ConfiguringtheLAN(LocalAreaNetwork).....................................42 DHCPServer.................................................................................................43 ConfiguringDynamicHostConfigurationProtocol.......................44 EnableStaticDHCPIP..............................................................................45 CurrentStaticDHCPTable......................................................................46 ConfiguringEventLogging.....................................................................47 MonitoringBandwidthUsage................................................................48 ConfiguringtheSystemLanguage.....................................................49 ConfiguringIPCameras............................................................................50 ConfiguringInternetSettings...............................................................51 ConfiguringDynamicIP...........................................................................52 DNSServers..................................................................................................53 ConfiguringStaticIP.................................................................................54 ConfiguringPPPoE.....................................................................................55 ConfiguringPPTP.......................................................................................56 PPTPSettings..............................................................................................57 Configuring L2TP.......................................................................................58 L2TP Settings..............................................................................................59 ConfiguringDS-Lite...................................................................................60 WirelessLANSetup...................................................................................61 AccessPointMode....................................................................................62 WirelessDistributionSystemMode....................................................63 WDSSecuritySettingsScreen...............................................................64

Table of Contents

4

Chapter 5 Wireless Encryption.....................................................65 Wi-FiProtectAccess(WPA)Pre-SharedKey..................................66 ConfiguringSecurity.................................................................................67 Encryption Type.........................................................................................68 WPA Radius..................................................................................................69 WiredEquivalentPrivacy(WEP)...........................................................70 ConfiguringFilters......................................................................................71 MACAddressFilteringTable.................................................................72 ConfiguringWi-FiProtectedSetup....................................................73 ConfiguringClientList.............................................................................74

Chapter 6 Advanced Settings...........................................................75 ConfiguringAdvancedSettings............................................................76 SettingUpParentalControls.................................................................78 AddingaControlPolicy............................................................................79 ViewingParentalPolicies.......................................................................82 GuestNetwork............................................................................................83 ConfiguringtheDHCPServerSetting...............................................84 ViewingtheDHCPClientListontheGuestNetwork.................85 IPv6.................................................................................................................86 ViewingtheIPv6ConnectionStatus.................................................87 ConfiguringStaticIPv6............................................................................88 SettingAutoconfiguration.....................................................................89 Configuring PPPoE....................................................................................90 Configuring6to4........................................................................................92 ViewinglocalConnections.....................................................................93 Firewall Setup.............................................................................................94 ConfiguringAdvancedSettings...........................................................95 ConfiguringDemilitarizedZone...........................................................97 ConfiguringDenialofService................................................................98 VirtualPrivateNetworkSetup..............................................................99 ConfiguringaVPNTunnelProfile.......................................................100 General........................................................................................................101 SA(SecurityAssociation)......................................................................102

Network.......................................................................................................103 Advanced.....................................................................................................104 ConfiguringaUserSetting...................................................................105 USBPort/Enshare..................................................................................106 ViewingFileServer.................................................................................107 ViewingDLNA...........................................................................................108 AdvancedNetworkSettings................................................................109 PortMappingSetup................................................................................110 CurrentPortMappingTable................................................................111 PortForwardingSetup...........................................................................112 CurrentPortForwardingTable..........................................................113 PortTriggeringSetup............................................................................114 ApplicationLayerGetawaySetup....................................................116 UniversalPlugandPlaySetup...........................................................117 InternetGroupMulticastProtocolSetup.......................................118 Quality of Service Setup.......................................................................119 Priority Queue...........................................................................................120 BandwidthAllocation.............................................................................121 Routing Setup...........................................................................................122 WakeonLANSetup................................................................................123 ToolsSetup................................................................................................124 System Time Setting..............................................................................125 SynchronizingTimewithaComputer.............................................126 DynamicDomainNameService(DDNS)Setup............................127 DiagnoseThatClientDevicesAreConnected.............................128 UpgradingtheRouter’sFirmware....................................................129 BackingUptheRouter’sSettings.....................................................130 RebootingtheRouter............................................................................131

Appendix..........................................................................................132 WallMountingtheRouter....................................................................133 ProfessionalInstallationInstruction(English/French).............134 FCCInterferenceStatement...............................................................136 IndustryCanadaStatement................................................................137

5

Chapter1 Product Overview

6

MaximumdataratesarebasedondraftIEEE802.11acandIEEE802.11standards.Actualthroughputandrangemayvarydependingonmanyfactorsincludingenvironmentalconditions,distancebetweendevices,radiointerferenceintheoperatingenvironment,andmixofdevicesinthenetwork.EnGeniusTechnologies,Inc.EnShare™supportsbothFAT32andNTFSUSBformats.Transferspeedsofdatafromyourrouter-attachedUSBstoragedevicetoaremote/mobiledevicemayvarybasedonInternetuplinkanddownlinkspeeds,bandwidthtrafficateithersendorreceivelocations,thedataretrievalperformanceoftheattachedstoragedeviceorotherfactors.EnGeniusdoesnotguaranteecompatibilitywithallUSBdrives.EnGeniusdoesnotwarrantitsproductsorEnSharefromlossofdataorlossofproductivitytime.Featuresandspecificationssubjecttochangewithoutnotice.Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.ForUnitedStatesofAmerica:Copyright©2013EnGeniusTechnologies,Inc.Allrightsreserved.

Product Overview

Key Features

• DualBandWirelessAC1750DraftIEEE802.11acandIEEE802.11a/b/g/n

• Upto450Mbpsinthe2.4GHzfrequencybandandupto1300Mbps in5GHz

• Built-in4-PortGigabitSwitchforoptimalaudio/visualstreaming• USBPorttoshareandaccessmediacontentinthehomeorwhen

you’reawayfromhomewithEnShare™• NextGenerationIPv6Compliant• ParentalControls• Upto8GuestAccesssettings(4perfrequencyband)• Industry-standardWirelessEncryptionandSecurity• VPNServerSupportLite-BusinessApplications• EasySetupWizard

Robust and Reliable Wireless PerformanceTheEPG5000isaDual-BandWirelessAC1750Routerwith

abuilt-in4-portGigabitEthernetswitch.Thiscosteffective

routercanconnecttoDSLorcablemodemstoprovide

high performance Internet access for desktop or laptop

computers,tablets,smartphonesandawidevarietyofhome

entertainmentdevices,likeHDTVs,settopboxes,Blu-ray

players and game consoles.

Therouter’sconcurrentdualbanddesignenablesusersto

connectnumerouswirelessdevicestoit,givingthemthe

optiontoleverageQuantumBeamandtheACspeedbooston

thelesscongested5GHzfrequencyforbandwidthintensive

applicationslikestreamingHDvideo.

7

Product Overview

A Media Sharing PlatformTheEPG5000isdesignedtoaccessandsharemediafor

devicesonthehomenetwork.Inadditiontoconnectinghome

entertainmentcomponentstoanyofitsavailableGigabit

Ethernetports,theEPG5000alsoincludesaUSBportfor

attachingaUSBstoragedevicesowirelessdevicesinthe

homeorawayfromthehomecanaccessoruploadmedia

contentwhereverthereisanavailableInternetconnection

throughEnShare™-YourPersonalCloud.

EnShareisavailableasanInternetportalforaccessingstored

mediaconnectedtotheUSBportoftherouter(Seethe

UsingEnSharedocumentintheproductpackaging).EnShare

willalsobeavailableasanappforAppleiOSdevices(iPads,

iPodsandiPhones)andAndroid-baseddevices(smartphones,

tabletPCs,Kindleandothermobilereaders)soon.Theapps

willbeavailablethroughAppleiTunesStoreandGooglePlay

respectively.

Industry-standard Wireless SecurityThe router supports a variety of security features and

mechanismsincludingindustry-standardWPA/WPA2wireless

encryptiontopreventunauthorizedaccesstoyournetwork.It

alsoincludesabuilt-inSPI(StatefulPacketInspection)firewall

tohelppreventattacksfrommalicioussoftware(malware)

from the Internet. The router also supports IPv6.

Attach USB storage to the EPG5000 and access or upload video, music, and other media throughout your home or away from home from your smartphone, tablet, or laptop.

USBMediaAnywhere with EnShareTM

More Guest Access OptionsTheEPG5000alsoincludesuptoeight(8)separate

anddiscreteGuestAccessoptionsallowingtherouter’s

administratortoassigndifferentnames(SSIDs-ServiceSet

Identifiers)foreachlogintothehomenetworksofriendsor

visitorscanaccesstheuser’sInternetconnectionwithout

accessingpersonaldatastoredonnetworkedcomputersin

the home.

8

Technical Specifications

Device InterfaceGigabitWANPort4GigabitLANPortsUSB2.0PortPushButtonforWPSResetButton

IEEE Standards802.11ac(draft)802.11a/b/g/nUpto450Mbpswirelessspeedon2.4GHzfrequencybandand1300Mbpson5GHzfrequencyband802.3i/u/ab

LED IndicatorsPowerWLAN(WirelessConnection)Internet

Package ContentsEPG5000RouterPowerAdapter(12V1.5A)QuickStartGuideRJ45EthernetCable

Power SpecificationExternalPowerAdapterDCIn,12V1.5A

CertificationsFCC/CE/IC

Physical/Environmental ConditionsOperatingTemperature:0º~40ºCelsiusHumidity:90%orless(non-condensing)StorageTemperature:-20º~60ºCelsiusHumidity:95%orless(non-condensing)

Software Features

Frequency Bands2.400~2.484GHz(11b/11g/11n)5.18~5.24GHz(11a/11n)

Operating ModeAPRouter/WDS

Wireless FeaturesAutoChannelSelectionOutputPowerControlWMM(WirelessMultimedia)MSSID(MultipleSSID)

SecurityWEP/WPA-PSK/WPA2-PSKTKIP/AESHiddenSSIDMACAddressFiltering802.1XAuthenticationDDoSDHCPServer/ClientSPI(StatefulPacketInspection)NATPortForwardingDMZPortMapping/TriggeringVPNServer(PPTP/L2TP)VPNClient(PPTP/L2TP)VPNPass-through(PPTP/L2TP/IPSec)RuleBased(IPAddressRanges,PortBlockICMPVPNTunnel(Maximum5)QoSIP FilteringPort FilteringDDNSIPv6Pass-throughMACCloneTrafficMonitorWANType:PPPoE/DHCP/StaticIPUSBFeatures:SAMBA

9

Physical InterfaceDimensions and WeightsWeight:0.5lbs.Diameter:6.36”Height:1.64”

1 WLAN 5 GHz LED2 WLAN 2.4 GHz LED3 Power LED4WAN Port/(Internet) Status LED5 WPS(WirelessProtectedSetup)LED

6 DC Power Jack—connectstheESRSeriesRoutertoitsDCpoweradapter

7WAN Port—connectstheESRRoutertoacableorDSLmodemtoaccesstheuser’sbroadband(Internet)connection

8 LAN Ports (1 – 4) — for connecting home entertainment components,computersorotherEthernet-enableddevicesusingEthernetcables

9 Reset Button — For resetting the router to its factory default settingsbypressingbuttonformorethan11secondsoruntilthePowerLEDstartsflashing.

10 USB PortforconnectingaUSBStorageDevice11 WPS Button—Wi-FiProtectedSetupbutton.Toassociate

anotherWPS-enabledclientdevice(computer,wirelessmediabridge,USBadapter,etc.)presstheWPSbuttonfor2to5secondsontherouterwhilealsopressingtheWPSbuttononthe end device.

Whenconsideringtheplacementoftherouterrememberthefollowing:• Itmustbeclosetoanelectrical

outlet.• Foroptimalwirelessconnectivity,

place the router near the center of theroomifpossible,atahighlevel

Otherelectronicdevicesandsomearchitectural construction materials orimpedimentsmayinterferewiththewirelesssignal(s)oftherouterand reduce its range or coverage. Try tominimizethenumberofwallsorfloorsthattherouter’ssignalneedstopenetratetoconnecttootherwirelessdevices.

1 2 3 4 5

6 7 8 9 10 11

10

Chapter2 Controlling the Router Through Its Web Configuration Interface

11

Logging InDuringtheQuick Start Guide procedure, you should have

successfully logged into the router’s Web Configuration user interface (essentiallytherouter’soperatingsystemthatcontrolshowitoperates)andestablishedsomeinitialsettings

and controls for the router.

Ifyouwishtochangetherouter’ssettings (establishanewusernameandpasswordforthepersonwhomanages

andmaintainstherouter,setParentalControls,establish

aGuestAccess-SSIDsettingforvisitors,oranynumberof

othersettings)youcanlogintotheWebConfigurationagain

throughthewebbrowser(InternetExplorer,Safari,Chrome,

Firefox)onyourcomputerortabletdevice.

To do this, enter the router’s default IP address of

192.168.0.1intoyourbrowser’saddresswindow.1.Attheloginscreenenteryourusernameandapassword

2.ClickLogintocontinue.

Thedefaultloginsettingsare:

username:admin password:admin

It’s highly recommended that, if you haven’t done so already,

to change these default names, so your router and the devices

connectedtoitonyourhomenetworkaremoresecure.

12

Viewing the Web Configuration Dash BoardTheHomePagescreenoftheWebConfigurationinterface,ordashboard,providesaccesstotherouter’ssettingsandcontrols.

Home Page

Home

SetupWizard

NetworkSettings

USBStorageSharing

IPCamViewer

Language

Logout

13

Home Page

The Home PagedisplaystheareaswithintheWebConfigurationtowhichyoucannavigate:Setup Wizard,

Network Settings, USB Storage Sharing, IP Cam Viewer,

Language, and Logout

HomeTheHomelinktakesyoubacktothedashboardscreenno

matterwhereyouareintheWebConfigurationinterface.

Setup WizardTheSetupWizardlinkstartsthewizardthatautomatically

configurestherouter.

Network SettingsTheNetworkSettingslinkdisplaysthemenustomanually

configuretherouter.

USB Storage SharingTheUSBStorageSharinglinkdisplaysthemenustoaccess

shared storage devices connected to the router.

IP Cam ViewerTheIPCamViewerlinkdisplaysthemenustoviewanIP

cameraconnectedtothenetwork.

LanguageTheLanguagelinkdisplaysthemenutosettheOSDlanguage.

LogoutTheLogoutlinkclosestherouter’sWebConfiguration

interface from any screen.

14

Web Menus Overview

SystemViewandeditsettingsthataffectsystemfunctionality.

Operation ModeConfigurethedevicetobearouterorWDSaccesspoint.

StatusDisplaysthesummaryofthecurrentsystemstatus.

ScheduleScheduleservicestostartandstopatspecifictimesorintervals.

Event LogViewrecordedsystemoperationsandnetworkactivityevents.

MonitorViewthecurrentnetworktrafficbandwidthusage.

LanguageConfiguretheapplicationmenuandGUIlanguage.

IP CameraViewtheIPcamerasconnectedtotheESRSeriesRouter.

15

InternetViewandeditsettingsthataffectnetworkconnectivity.

StatusDisplaysasummaryoftheInternetstatusandtypeofconnection.

Dynamic IPSetupadynamicIPconnectiontoanISP(InternetServiceProvider).

Static IPSetup a static IP connection to an ISP.

PPPoESetup a PPPoE connection to an ISP.

PPTPSetup a PPTP connection to an ISP.

L2TPSetup an L2TP connection to an ISP.

16

Wireless 2.4 GHzViewandeditsettingsfor2.4GHzwirelessnetworkconnectivity.

StatusViewthecurrentwirelessconnectionstatusandrelatedinformation.

BasicConfiguretheminimumsettingsrequiredtosetupawirelessnetworkconnection.

AdvancedConfiguretheadvancednetworksettings.

SecurityConfigurethewirelessnetworksecuritysettings.

FilterEstablishalistofclientdevices(computer,tablets,smartphones,printers,etc.)

basedontheirMAC(MediaAccessControl)numbersthatareallowedtowirelessly

connecttothe2.4GHznetwork.

WPSAutomatestheconnectionbetweenawirelessdeviceandyourencryptedrouter

usingan8-digitPIN.

Client ListViewthe2.4GHzwirelessdevicescurrentlyconnectedtothenetwork.

17

Wireless 5 GHzViewandeditsettingsfor5GHzwirelessnetworkconnectivity.

StatusViewthecurrentwirelessconnectionstatusandrelatedinformation.

BasicConfiguretheminimumsettingsrequiredtosetupawirelessnetworkconnection.

AdvancedConfiguretheadvancednetworksettings.

SecurityConfigurethewirelessnetworksecuritysettings.

FilterEstablishalistofclientdevices(computer,tablets,smartphones,printers,etc.)

basedontheirMAC(MediaAccessControl)numbersthatareallowedtowirelessly

connecttothe5GHznetwork.

WPSAutomatestheconnectionbetweenawirelessdeviceandyourencryptedrouter

usingan8-digitPIN.

Client ListViewthe5GHzwirelessdevicescurrentlyconnectedtothenetwork.

18

Parental ControlsViewandeditsettingsforparentalcontrols.

WizardEnableordisabletheParentalControlsfunction.Themenualsoprovidesinforma-

tionforconfiguringparentalcontrolpolicies.

Web MonitorThemenuprovidesalogoftheeventsfordefinedparentalcontrolpolicies.

19

Guest NetworkViewandeditsettingsforaguestnetwork.

SelectionEnableordisabletheGuestNetworkfunction.

DHCP Server SettingConfiguretheGuestNetworkDHCPserversettings.

DHCP Client ListConfiguretheGuestNetworkclientlist.

20

IPv6ViewandeditsettingsfortheIPv6protocol.

BasicAllowsyoutoenableordisabletheIPv6andIPv6Pass-throughfunctions.

StatusShowsIPv6LANconnectiondetails.

Static IPv6ConfiguretheIPv6protocol.

Auto ConfigurationConfiguretheIPv6byobtainingtheinformationthroughtheISPprovider.

PPPoEConfigurethePPPoEnetworkprotocol,obtaininformationfromyourISP(Internet

ServiceProvider).

6to4AllowsIPv6packetstobetransmittedoveranIPv4network.

Link LocalConfiguretheIPv6linklocaladdress.

21

FirewallViewandeditsettingsforthenetworkfirewall.

BasicEnableordisablethenetworkfirewall.

AdvancedConfigurevirtualprivatenetwork(VPN)packets.

DMZRedirectpacketsfromtheWANportIPaddresstoaparticularIPaddressonthe

LAN.

DoSEnableordisableblockingofDoS(DenialofService)attacks.

ACLConfigureaccesscontrollists.

22

VPNViewandeditsettingsforVPNtunnelling.

StatusViewthestatusofcurrentVPNtunnels.

Profile SettingManuallyconfigureVPNtunnels.

User SettingConfigureusers,userIDandpasswordcombinations,andassignaccesstospecific

VPNtunnels.

WizardAutomaticallyconfigureVPNtunnelswithguidancefromthesoftware.

23

USB PortForviewingandeditingsettingsforstoragesharing.

EnShare™EnablesordisablestheEnShareremoteaccessfunction.

File SharingEnablesordisablestheSambasharingfunction.

File ServerEnablesandconfigurestheFileServerfunction.

DLNAEnablesthediscoveryofDLNAdevices(someHDTVs,gameconsoles,somesettop

boxes/mediaplayers,Blu-rayplayers,somesmartphones,andnetworkattached

storage)onthehomenetwork.

24

AdvancedViewandconfigureadvancedsystemandnetworksettings.

NATEnableordisableNetworkAddressTranslation(NAT).

Port MappingRe-directarangeofserviceportnumberstoaspecifiedLANIPaddress.

Port ForwardingConfigureserverapplicationstosendandreceivedatafromspecificportsonthe

network.

Port TriggeringConfigureapplicationsthatrequiremultipleconnectionsanddifferentinboundand

outboundconnections.

ALGConfiguretheapplicationlayergateway(ALG).

UPnPEnableordisableUniversalPlugandPlay(UPnP)functionality.

IGMPEnableordisabletheInternetGroupMulticastProtocol(IGMP).

25

QoSConfiguresthenetworkqualityofservice(QoS)settingbyprioritizingtheuplink

anddownlinkbandwidth.

RoutingConfigurestaticrouting.

WOL(WakeOnLAN)ConfigureWakeonLANtoturnonacomputeroverthenetwork.

26

ToolsForviewingandconfiguringtherouter’soperatingsystemandnetworktools

settings.

AdminForsettingtheadministrator’spasswordusedtologintotherouter.

TimeForconfiguringthesystemtimeontherouter.

DDNSMapsastaticdomainnametoadynamicIPaddress.

DiagnosisToperformaPingtesttoverifywhetheraspecificdeviceisconnectedtotheLAN.

FirmwareForupdatingtherouter’sfirmware.

BackupForloadingorsavingtheconfigurationsettingstoorfromabackupfileorto

restore the router to its factory default settings.

ResetRebootstherouter.

27

Chapter3 Installation Setup Wizard

28

Internet Setup Wizard

UsetheWizardtodetectandsetupthe

type of Internet connection you need,

tosetupasecurewirelessconnection,

tocreateanadministratorpasswordto

secure the device, or set the router’s date

and time properties.

TousetheInternetSetupWizard,follow

thesesteps:

1. Click the Wizard buttontoshowtheWizardstartscreen.

2.ClickNexttocontinuewiththesetupprocedure.

Home

SetupWizard

29

1.DecidehowtosetuptheInternetconnection.

Note:It is recommended to let the device setup the Internetconnection automatically.

• Select Auto DetecttolettheWizardsetuptheInternetconnection.

• Select Manual Setup to set the properties yourself.

2.ClickNext to continue or Prev to return to the previous

screen.

If you selected Manual Setup,followthesesteps:

3. Select the Internet connection type and enter the

connection properties.

Setting Up Your Internet Connection

Note:TheconnectiontypesavailablearestaticIP,PPPoE,DynamicIP,PPTP,andL2TP.

4.ClickNext to continue, Prev to return to the previous

screen, or Cancel to stop the procedure.

30

Settingwirelessencryptionfor2.4GHzand5GHznetworks.

Toencryptthewirelesssignalsforeitherorbothofthefrequency

bandsintheEPG5000router,followthesesteps:

1.EntertherouternameinthewirelessName(SSID)textfield.

2.SelectthesecuritylevelfromtheEncryptiondropdownlist.

3.EnterapasswordintheEncryptionKeytextfield.

4.Repeatsteps1through3toencryptthe5GHzband

5.ClickNext to continue, Prev to return to the previous screen, or

Cancel to stop the procedure.

Setting Your Wireless Security

Important:Toensurethenetworkissecure,itisrecommended to select High for an encryption level.

31

Setting Your Router’s Administrator PasswordSetupapasswordtologintotheESRSeriesRouter.

1.EnterapasswordintheNew Passwordtextfield.2.EnterthesamepasswordintheRepeat New Passwordtextfield.3.ClickPrev to return to the previous screen, Skip to skip this procedure, Next to

continue, or Cancel to stop the procedure.

32

Setting Your Router’s Time ZoneSetupdateandtimesyncronizationontheESRSeriesRouter

withacomputeroranNetworkTimeProtocol(NTP)server.

Tosynchronizedateandtimesettingswithacomputer,follow

thesesteps:

1.SelectSynchronizewithPC(computer)fromtheTime Setup

dropdownlist.ThedateandtimevaluesareshowninthePC Date and Timetextfield.

2.ClickPrev to return to the previous screen, Apply to save the

settings, or Cancel to stop the procedure.

TosynchronizethedateandtimesettingswithanNTPserver,

followthesesteps:

1. Select SynchronizewithNTPServerfromtheTime Setup

dropdownlist.

2.SelectatimezonevaluefromtheTime Zonedropdownlist.3.EnteranIPaddressordomainnameofanNTPserverinthe

NTP Servertextfield.

4.ClicktheEnable Daylight Savingscheckboxtoenableordisabledaylightsavingstime.

5.Selectthedateandtimevalueswhendaylightssavings

time starts in the Start Timedropdownlists.

33

6.Selectthedateandtimevalueswhendaylightssavings

time ends in the End Timedropdownlists.

7.ClickPrev to return to the previous screen, Apply to

save the settings, or Cancel to stop the procedure.

34

Status and Save SettingsThisscreenletsyoureview,changeandsaveyourInternet

connection,savewirelesssecuritysettingsorsetupupauser-

specifiednameforthedefaultEnGeniusDDNSservice.

Toreviewormodifythedevicesettings,followthesesteps:

1.ReviewthesettingsshownonthescreenfortheInternet

connection,2.4GHzand5GHznetworks,andtherouter

administrator login.

2. You can change settings to the Internet connection and

wirelessnetworksettingsbyclickingtheSetupbutton.

Youmaywishtouseadifferentnamethat’seasiertoremember

forthedefaultEnGeniusDDNSserviceusedfortheEnShare™

feature.TospecifyyourownDDNSname,followthesesteps:

3. The Enableoptionshouldbeselectedbydefault.a. Enter the name in the Domain Nametextfield.b.SelectatimeintervaltorefreshtheDNSrecordsfromthe

Refreshdropdownlist.c.ClickApplytosavetheDDNSnameyouhaveentered.

4.ClickSavetoexittheWebConfigurationinterface.Therouterwillreboot(restart)toapplyallthesettingsyou’vespecified.

Devicesconnectedtotherouterwilltemporarilylosetheir

Internetconnection.Therebootmaytakeseveralseconds

beforetherouterandyourInternetconnectionareonceagain

available.

WARNING! Selecting DisableintheDDNSSettings/Statusfieldwilldisconnecttherouter’sconnection

tothedefaultEnGeniusDDNSserverandasaresult

willdisabletheEnSharefeaturewhichletsyouaccess

mediafromaUSBstoragedeviceconnectedtoyour

ESRpodrouterwhenyou’reawayfromyourhome.

35

Chapter4 Basic Network Settings

36

Note:If a feature or function does not apply to all modes, a note indicates whichmodesareapplicable.Otherwise,itisassumedthefeatureor function applies to all modes.

Network Settings

Viewing System StatusToseeamoredetailedviewoftherouter’sstatusthan

theinformationdisplayedontheHomepageoftheWeb

Configurationinterface,fromtheHomePageclickonNetwork Settings buttonintheuppernavigationbar.

Home

NetworkSettings

37

StatusToviewtheStatussettings,clickSystem then click Status.

OntheStatuspage,youcanviewasummaryofthecurrentroutersystemstatusincludingtherouter’s(hardware/software

version,date/time),wirednetwork(LAN)andwirelessnetwork

(WLAN)information.

ModelThe model name of the ESR Series Router.

ModeThe operating mode of the ESR Series Router.

UptimeTheamountoftimetheESRSeriesRouterhasbeenconnected

for the current session.

Current Date/TimeThe current system date and time.

Hardware VersionThehardwareversionnumberoftherouter.

Serial NumberTheserialnumberoftherouter(requiredforcustomerserviceor

support).

Application VersionTheversionoftherouter’sfirmware.

Note:Toupdatetherouter’sfirmware,visitwww.engeniustech.com and go to the product page for your router, then select the Downloadstabatthebottomofthewebpagetoseeifanewerversionofthefirmwareisavailable.

38

WAN Settings

Attain IP ProtocolDisplaystheIPprotocolinusefortherouter.Itcanbea

dynamic or static IP address.

IP AddressTherouter’sIPaddressasdesignatedbyanISP(InternetService

Provider).

Subnet MaskTherouter’sWANsubnetmaskasdesignatedbyanISPprovider.

Default GatewayTherouter’sgatewayaddressasdesignatedbyanISPprovider.

MAC AddressTherouter’sWANMAC(MediaAddressControl)address.The

router’sMACaddressislocatedonthelabelonthebottompanel

oftherouterandisuniqueforeachrouter.

Primary DNSTheprimaryDNSofanISPprovider.

Secondary DNSThesecondaryDNSofanISPprovider.

39

LAN Settings

IP AddressTherouter’slocalIPaddress.ThedefaultLANIPaddressis

http://192.168.0.1ToaccesstheWebConfigurationinterfacefortherouter,type

thisaddressintotheaddress(URL)fieldofyourwebbrowser.

Thiscanonlybedoneinthesamephysicallocationwherethe

routerresides(yourhomenetwork).

Subnet MaskTherouter’slocalSubnetMask.

DHCP ServerTheDHCPsettingstatus(Default:Enabled).TheDHCP(Dynamic

HostControlProtocol)isasoftwaremechanisminyourrouter

thatassignsIPaddressestowiredandwirelessdevicesonyour

network,forexample,acomputer,printer,tabletorHDTVonyour

networkmaybeassignedanIPaddressofhttp://192.168.0.104.

Notehowtheaddressisessentiallyanextensionoradditionof

your router’s IP address.

MAC AddressTherouter’suniqueMACaddress.

40

WLAN Settings

ChannelThecommunicationschannelusedbyallstations,orcomputing

devices,onthenetwork.

ESSIDTheIDvalueofasetofoneormoreinterconnectedbasicservice

sets(BSSs).

SecurityThesecuritysettingstatus(Default:Disabled).

BSSIDTheuniqueIDoftheBSSusingtheabovechannelvalueonthis

router.TheIDistheMACaddressoftheBSSsaccesspoint.

Associated ClientsThenumberofclientsassociated(activelylinkedtotheroutervia

awirelessorwired/Ethernetconnection)withthisSSID.

41

Guest Network

Guest NetworkTheguestnetworkstatus.(Default:Disabled)

IP AddressTheGuestNetwork’sLANIPaddress.

Subnet MaskTheGuestNetwork’slocalsubnetmask.

DHCP ServerTheGuestNetworkDHCPsettingstatus(Default:Enabled).

Guest Network InterfaceTheSSID(ServiceSetIdentifier)oftheGuestNetwork.

42

Configuring the LAN (Local Area Network)Thesettingsonthispageallowyoutoconfigurethewired

networksettings.Devicesconnectedtotherouter’sEthernet

portscompriseitsLAN.Therouter’sIPisdefinedintheIP Addressfield.ThedefaultsettingoftheDHCPserverissetto Enabledsothatnetworkedclients(computers,homeentertainmentcomponents,printers,etc.)willautomaticallybe

assignedIPaddressesbytherouter.

MoreadvancedusersmaywishtoconfiguretheDNSserver

settingstomeettheirspecificrequirements.Changingthe

settings in this section are not necessary for most situations.

ToviewtheLANsettings,clickSystem, then click LAN.

Note: Keep the router’s default values if you are uncertain of the settings values.

LAN IP IP AddressForconfiguringtherouter’sLANIPaddress.

IP Subnet MaskForconfiguringtherouter’sLANSubnetMask

802.1d Spanning TreeSpanningTreeisdisabledbydefault.Whenenabled,Spanning

Treepreventsnetworkloops(transmissionswon’tpassthe

samenodetwiceorseveraltimestoreachthedestination).

Note:

ThedefaultdeviceIPaddressis192.168.0.1.

43

DHCP ServerTheDHCPserverassignsIPaddressestothedevicesontheLAN.

DHCP ServerEnableordisabletheDHCPserver(Default:Enabled).

Lease TimeConfiguretheamountoftimeeachallocatedIPaddresscanbe

usedbyaclient.

Start IPThefirstIPaddressintherangeofaddressesassignedbythe

router.

End IPThelastIPaddressintherangeofaddressesassignedbythe

router.

Domain NameThe domain name of the router.

44

Configuring Dynamic Host Configuration ProtocolThiswindowallowsyoutoviewandconfigureDynamicHostConfigurationProtocol(DHCP)addresses.

WARNING! Donotmodifythesettingsinthissectionwithoutathoroughunderstandingoftheparameters.

ToviewtheDHCPsettings,clickSystem then click DHCP.

DHCP Client TableDisplaystheconnectedDHCPclientswhoseIPaddressesare

assignedbytheDHCPserveroftherouter.

IP AddressDisplaystheIPaddressofthestaticDHCPclientdevice

inthetable.

MAC AddressDisplaystheMACaddressofthestaticDHCPclientdevice

inthetable.

Expiration TimeThedateandtimewhenthecurrentDHCPaddress

is no longer valid.

ClickRefreshtoupdatethetable.

45

Enable Static DHCP IP

TherearereasonswhyyoumaywanttoenableastaticIP

addressonaclientdeviceonyourESRrouter’snetwork.

Onoccasion,iftherearepoweroutagesorifyou’vereconfigured

thesettingsonyourESRrouterandreboot(restart)ittoapply

thenewsettings,thepreviousIPaddressthattherouter’sDHCP

serverassignedtooneormoredevicesonthenetworkmayhave

changed.Someclientdevicesonyournetworkmayalsohave

webconfigurationinterfaces(settopboxes,NetworkAttached

Storage,etc.)thatareaccessiblefromtherouter’sassigned

IPaddressfromitsDHCPserver,sotheclientdevicecanbe

managed. Thus if the client device’s IP address changes from

timetotime,itmaybedifficultlinkingtoitunlessyoufindits

newaddressthroughtheESRrouter’sDHCPClientTable.

Ifyouwishtoavoidthis,thentheEnableStaticDHCPIPoption

allowsyousetastatic(essentiallyapermanent)addressfor

givenclientdevicesonyournetwork.

To do so, select the Enable Static DHCP IP option.

IP AddressEntertheIPaddressofthedevicetoaddasastaticDHCPclient.

MAC AddressEntertheMACaddressofthedevicetoaddasastaticDHCP

client.

ClickAddtoaddthedevicetothestaticDHCPclienttableorReset toreturnthetabletoitspreviousstate.

46

Current Static DHCP Table

AllowsyoutoviewtheactivestaticDHCPIPaddressesthat

havebeenmanuallyassignedtoclientdeviceswiththeir

correspondingMACaddresses.

No. (Number)DisplaystheIDofthestaticDHCPclientdeviceinthetable.

IP AddressDisplaystheIPaddressofthestaticDHCPclientdeviceinthe

table.

MAC AddressDisplaystheMACaddressofthestaticDHCPclientdeviceinthe

table.

SelectClicktoselectstaticDHCPclientdevicestobedeleted.

ClickDelete Selectedtoremoveaselectedaddress.ClickDelete All toremovealladdressesfromthetable.ClickReset to return

thetabletoitspreviousstate.ClickApply to save the settings or

Cancel to discard changes.

47

Configuring Event LoggingThe logging service records and displays important system

informationandactivityonthenetwork.Theeventsarestoredin

amemorybufferwitholderdataoverwrittenbynewerwhenthe

bufferisfull.

ToviewtheLogsettings,clickSystem then click Log.

Log Message List

Select Enable Logging to Syslog Server ClickSave to start logging information to the system.

Log Message windowShowsthecurrentsystemoperationsandnetworkactivity.

ClickSavetosavethemessagelisttoatextfile,Clear to discard

messagefromthememorybuffer,orRefresh to clear previous

messagesandwritenewmessagestothememorybuffer.

ClickApply to save changes.

48

Monitoring Bandwidth UsageThistoolallowsyoutoviewreal-timebandwidthusageforWAN

(WideAreaNetwork-orInternet),LAN(LocalAreaNetwork)and

WLAN(WirelessLocalAreaNetwork)traffic.FortheEPG5000,

itshowsboththebandwidthtrafficinboththe2.4and5GHz

frequencybands.

ToviewtheBandwidthMonitorsettings,clickSystem, then click

Monitor.

ThescreensdisplaytheactivebandwidthusageforboththeLAN

andWLANnetworksaswellasthebandwidthbeingusedonthe

WANconnection.

49

Configuring the System Language

TheESRrouter’sWebConfigurationinterfacesupportsmultiple

languages.

ToviewtheLanguagesettings,clickSystem, then click

Language.

Selectthesystemlanguageyouwishtousefromthedrop-down

menu.

50

Configuring IP CamerasThisESRroutersupportsuptofour(4)EnGeniusIPCameras

simultaneously.IfnoIPCameraisdetected,pleasecheckthatthe

IPCamera’sIPaddressandUPnPclientareconfiguredcorrectly.

ToviewtheIPCamerasettings,clickSystem, then click IP Camera.

Beforestartingthisprocedure,youmustconnectyourEnGenius

IPcameratothenetwork.

Makesurethecameraispoweredon.

ClicktheRefreshbuttontoviewalistingofavailabledevices.

Note:The"IPCamera"functionsupportsEnGeniusIPCameraproductsonly.

51

Configuring Internet Settings

View Internet StatusTheWANSettings,orInternetStatus,pageshowsasummaryof

the current Internet connection information. This section is also

shownontheSystemStatuspage.

ToviewtheStatussettings,clickInternet, then click Status.

WAN SettingsToviewtheWANSettings,clickInternetthenselectStatus.

Attain IP ProtocolDisplaytheIPProtocoltypeusedfortheESRSeriesRouter

(DynamicIPAddressorStaticIPAddress).

IP AddressTherouter’sWANIPaddress.

Subnet MaskTherouter’sWANsubnetmask.

Default GatewayTheISP’sgatewayIPaddress.

MAC AddressTherouter’sWANMACaddress.Therouter’sMACaddressis

locatedonthelabelonthebacksideoftherouter.

Primary DNSTheprimaryDNSaddressofanISPprovider.

Secondary DNSThesecondaryDNSaddressofanISPprovider.

52

Configuring Dynamic IPDynamicIPaddressingassignsadifferentIPaddresseachtime

adeviceconnectstoanISP(InternetServiceProvider)andmost

commonlyusedbycableISPs.

ToviewtheDynamicIP,clickInternet then select Dynamic IP.

Dynamic IP

HostnameAssignanamefortheInternetconnectiontype.Thisfieldcanbe

blank.

MTU (Maximum Transmission Unit)AllowsyoutoconfiguretheMTU.TheMTUspecifiesthelargest

packetsizepermittedforaninternettransmission.Thefactory

defaultMTUsizeforDynamicIP(DHCP)is1500.TheMTUsize

canbesetbetween512and1500.

Clone MACEntertheMACaddressofyourcomputer’s(ortablet’s)network

embeddedNetworkInterfaceCard(NIC)intheMACaddressfield

and click Clone MAC.

Note:SomeISPprovidersrequireregisteringtheMACaddressoftheNetworkInterfaceCard(NIC)connecteddirectlytothecableorDSLmodem.CloneMACmaskstherouter'sMACaddresswiththeMACaddressofthecomputer’sNIC.

53

DNS ServersTheDNSservertranslatesadomainorwebsitenameintoaURL

(UniformResourceLocator),orInternetaddress.Therearetwo

optionstochoosefrom:FromISPorUser-Defined.SelectFromISPto

retrievetheDNSaddressvaluefromtheISP;selectUser-Definedto

assignacustomDNSserveraddress.

DNS Server

ConfigurethetypeofDNSserver.(Default=FromISP)

First DNS Server

Configurethefirst,orprimary,DNSserver.

Second DNS Server

Configurethesecond,orsecondary,DNSserver.

ClickApply to save the settings or Cancel to discard the changes.

54

Configuring Static IPSettingastaticIPaddressallowsanadministratortoseta

specificIPaddressfortherouterandguaranteesthatitcannot

beassignedadifferentaddress.

ToviewtheStaticIPsettings,clickInternet, then click Static IP.

Static IP

IP AddressTherouter’sWANIPaddress.

Subnet MaskTherouter’sWANsubnetmask.

Default GatewayTheWANgatewayaddress.

Primary DNSTheprimaryDNSserveraddress.

Secondary DNSThesecondaryDNSserveraddress.

MTU (Maximum Transmission Unit)TheMTUspecifiesthelargestpacketsizepermittedforan

internettransmission.ThefactorydefaultMTUsizeforstaticIP

is1500.TheMTUsizecanbesetbetween512and1500.

MAC AddressTherouter’sMACaddress.

ClickApply to save the settings or Cancel to discard the

changes.

55

Configuring PPPoEPoint-to-PointProtocoloverEthernet(PPPoE)isusedmainlyby

ISPsthatprovideDSLmodemstoconnecttotheInternet.

ToviewthePPPoEsettings,clickInternet, then click PPPoE.

UsernameEntertheusernameassignedbyanISP.

PasswordEnterthepasswordassignedbyanISP.

Service NameEntertheservicenameofanISP(optional).

MTU (Maximum Transmission Unit)Enterthe(MTU).TheMTUspecifiesthelargestpacketsize

permittedforaninternettransmission(PPPoEdefault:1492).

TheMTUsizecanbesetbetween512and1492.

Authentication TypeSelectthetypeofauthenticationprovidedbytheISP:Auto,PAP,

orCHAP.Ifunsureofthebestsetting,selectAutoorcheckwith

your Internet Service Provider.

TypeConfiguretheconnectiontypebetweentherouterandthe

ISP.Selectoneofthefollowing:Keep Connection, Automatic Connection or Manual Connection.

Idle TimeoutConfigurethemaximumidletime(1to1,000minutes)allowed

for an inactive connection.

Clone MACEntertheMACaddressofthedevices’networkinterface

card(NIC)intheMACaddressfieldandclickCloneMAC.

Note: SomeISPprovidersrequireregisteringtheMACaddressofthenetworkinterfacecard(NIC)connecteddirectlytothecableorDSLmodem.CloneMACmaskstherouter’sMACaddresswiththeMACaddressofthecomputer’sNIC.

ClickApply to save the settings or Cancel to discard the

changes.

56

Configuring PPTPPPTP(Point-to-PointTunnellingProtocol)isusedinassociation

withvirtualprivatenetworks(VPNs).Therearetwopartsto

aPPTPconnection:theWANinterfacesettingsandthePPTP

settings.

ToviewthePPTPsettings,clickInternet, then click PPTP.

WAN Interface Settings

Dynamic IP AddressWAN Interface TypeSelectDynamicIPAddresstoassignanIPaddressprovidedbyan

ISP.

HostnameEnterahostnameofanISP.(optional).

Clone MACEntertheMACaddressofthecomputer’s(ortablet’s)embedded

NetworkInterfaceCard(NIC)intheMACaddressfieldandclick

Clone MAC.


57

PPTP Settings

User NameEntertheusernameassignedbyyourISP.

PasswordEnterthepasswordassignedbyyourISP.

Service IP AddressEnterthePPTPserverIPaddressprovidedbyyourISP.

Connection IDEntertheconnectionIDprovidedbyyourISP(optional).

MTU (Maximum Transmission Unit)EnterMTU.TheMTUspecifiesthelargestpacketsize(Default:

1462)permittedforanInternettransmission.TheMTUsizecan

besetbetween512and1492.



Idle TimeoutConfigurethemaximumamountoftime,inminutes,allowedfor

inactiveInternetconnection.TheInternetconnectionwillbe

droppedwhenthemaximumidletimeisreached.Validvaluesare

betweenoneandonethousand.


58

Configuring L2TPL2TP(Layer2TunnelingProtocol)isusedinassociationwith

VPNs(VirtualPrivateNetworks).TherearetwopartstoaL2TP

connection:

1.TheWANinterfacesettings

and

2. The L2TP settings.

ToviewtheL2TPsettings,clickInternet, then click L2TP.

WAN Interface Settings

Dynamic IP Address

WAN Interface TypeSelectDynamicIPAddresstoassignanIPaddressprovidedbyan

ISP.

HostnameEnterahostnameofanISP(optional).

Clone MACEntertheMACaddressofyourcomputer’sembeddedNetwork

InterfaceCard(NIC)intheMACaddressfieldandclickClone MAC.


59

L2TP Settings

UsernameEntertheusernameassignedbyanISP.

PasswordEnterthepasswordassignedbyanISP.

Service IP AddressEntertheL2TPserverIPaddressprovidedbyanISP.

Connection IDEntertheconnectionIDprovidedbyanISP(optional).

MTU (Maximum Transmission Unit)EnterMTU.TheMTUspecifiesthelargestpacketsize(Default:

1460)permittedforanInternettransmission.TheMTUsizecan

besetbetween512and1492.



Idle TimeoutConfigurethemaximumamountoftime,inminutes,allowedfor

inactiveInternetconnection.TheInternetconnectionwillbe

droppedwhenthemaximumidletimeisreached.Validvaluesare

betweenoneandonethousand.


60

Configuring DS-LiteDual-StackLite,orDS-Lite,allowsISPstostopIPv4addresses

fromreachingacustomer’snetworkdevicesandonlyuseIPv6.

ToviewtheDS-Litesettings,clickInternet, then click DS-Lite.

DS-Lite ConfigurationSelectDS-LiteDHCPv6OptionorManualConfiguration

AFTR IPv6 AddressEnter the AFTR IPv6 connection type

B4 IPv4 AddressEnteranOptionalB4IPv4address.

WAN IPv6 AddressEntertheWANIPv6address.

IPv6 WAN Default GatewayEntertheIPv6WANdefaultgatewayaddress.


61

Wireless LAN Setup

ToviewtheWirelessBasicsettings,clickWireless then select

Basic.

RadioEnableordisablethewirelessradio.Ifthewirelessradiois

disabled,wirelessaccesspointsarenotavailable.

ModeSelectthewirelessoperatingmodefortherouter.Twomodes

areavailable:AccessPointorWirelessDistributionSystem(WDS)

mode.

AP (Access Point)Providesaconnectionaccesspointforwirelessdevices.

WDS (Wireless Distribution System)Allowsthewirelessnetworktobeexpandedusingmultiple

accesspointswithoutwiredconnections.

ClickApply to save the settings or Cancel to discard changes.

62

Access Point ModeTheseinstructionsapplytoboththe2.4GHzand5GHzfrequencybands.

TherouterbydefaultisalreadyconfiguredinAccessPointMode.Foroptimumconnectivitytoanumberofdifferentwirelessclient

devices,it’srecommendedthatyoukeeptherouterinitsdefaultwirelesssettings.Youcanchoosetohavetherouterassociate

onlywithcertainiterations(IEEEstandards)andbydoingsothiswilleitherpositivelyornegativelyaffecttherouter’sspeedand

throughput performance.

BandSelectawirelessstandardforthenetworkfromthefollowing

options:

• 2.4GHz(IEEE802.11b)

• 2.4GHz(IEEE802.11n)

• 2.4GHz(IEEE802.11b/g)

• 2.4GHz(IEEE802.11g)

• 2.4GHz(IEEE802.11b/g/n)

• 5GHz(IEEE802.11a)

• 5GHz(IEEE802.11n)

• 5GHz(IEEE802.11a/n)

• 5GHz(IEEE802.11draftac)

Enable SSID#Selectthenumberofwirelessgroups,betweenoneandfour,

availableonthenetwork.

SSID[#]Enterthenameofthewirelessnetwork(s).

Auto ChannelEnableordisablehavingtherouterautomaticallyselecta

channelforthewirelessnetwork.AutoChannelisenabledby

default.Selectdisabletomanuallyassignaspecificchannel.

(Default=Disable)

Check Channel TimeWhenAutoChannelisenabled,selectatimeperiodthatthe

system checks the appropriate channel for the router.

ChannelWhenAutoChannelisdisabled,selectachanneltoassignto

thewirelessnetwork.Validvaluesarefromonetoelevenin

the US and one to thirteen in the EU.

63

Wireless Distribution System ModeConfiguringtherouter’swirelesssettingsforWDS(WirelessDistributionSystem)mode.

ChannelSelectachanneltoassigntothewirelessnetwork.Validvalues

are from one to eleven in the US and one to thirteen in the EU.

MAC Address [#]EntertheMACaddress(es)forthewirelessaccesspoint(s)

thatarepartoftheWDS.

WDS Data RateSelectthedataratefortheWDS.

Set SecurityClickSetSecuritytosetuptheWDSsecuritysettingsscreen.

64

WDS Security Settings ScreenSelectingthetypeofWDSencryption(Disable,WEPorWPAPre-

SharedKey)forthewirelessnetwork.

Wired Equivalent Privacy (WEP)

Key LengthSelectbetween64-bitand128-encryption.

Key FormatSelectthetypeofcharactersusedfortheWEPKey:ASCII

(5characters)orHexadecimal(10characters).

Default KeySelectthedefaultencryptionkeyforwirelesstransactions.

Encryption Key [#]Entertheencryptionkey(s)usedtoencryptthedatapackets

during data transmission.

65

Chapter5 Wireless Encryption

66

Wi-Fi Protected Access (WPA) Pre-Shared Key

WPA TypeSelectthetypeofWPA.

• WPATemporalKeyIntegrityProtocol(TKIP):Generates

a128-bitkeyforeachpacket.

• WPA2AdvancedEncryptionStandard(AES):

Governmentstandardpacketencryptionwhichis

stronger than TKIP.

Pre-Shared Key TypeSelectthetypeofpre-sharedkeyasPassphrase(ASCII)orHexadecimal.

Pre-Shared KeyEnterthepre-sharedKeyvalue.

67

Configuring SecurityEnablingsecurityoptionsonthewirelessnetworktoprevent

intrusionstosystemsonthewirelessnetwork.

ToviewtheSecuritysettings,clickWireless then select

Security.

SSID SelectionSelectthewirelessnetworkgroupinwhichyouwishtochange

itswirelesssecuritysettings.

Broadcast SSIDEnableordisablebroadcastSSID.Choosewhetherornotthe

wirelessgroupisvisibletoothermembers.

Wi-Fi Multimedia (WMM)Enableordisablequalityofserver(QoS)tooptimizethe

streamingforbandwidthsensitivedatasuchasHDTVvideo

streaming, online gaming, VoIP, videoconferencing, and etc.

EncryptionSelect the encryption type for the router.

Enable802.1xAuthentication

Enableordisable802.1xauthentication.

68


Wi-Fi Protected Access (WPA) Pre-Shared Key

WPA TypeSelectthetypeofWPAfromthefollowing:

• WPA2 Advanced Encryption Standard (AES):RECOMMENDED—GovernmentstandardpacketencryptionwhichisstrongerthanTKIP.

• WPA Temporal Key Integrity Protocol(TKIP):Generatesa128-bitkeyforeachpacket.

• WPA2 Mixed: MixedmodeallowsclientdevicestofirstassociatetotherouterusingWPA2,andiftheyfailto

connect,thentheyareconnectedviaWPA(TKIP).

Encryption TypeEnablingencryptionisstronglyencouragedbecauseunauthorizedpartieswithinrangeofyourrouter’swirelesssignalmayattempt

toaccessyourwirelessnetworkandthengainaccesstoprivateinformationondevicesonyournetwork.It’shighlyrecommended

thatyouencryptyourrouterwithWPA2(AES)foroptimalsecurityandthroughputperformance.Alwaysselectastrongpassphrase

greaterthan8characterslongandcomprisedofletters,numbers,andsymbols.Pleasemakenoteofthepassphraseandkeepitina

securelocationsomewhereinyourhomeincaseyouneedtoretrieveit.

Pre-Shared Key TypeSelectthetypeofpre-sharedkeyasPassphrase(ASCII)or

Hexadecimal.

Pre-Shared KeyEnterthePre-sSharedKeyvalue.

IMPORTANT! WPA2(AES)offersmuchstrongersecuritythanWEP(WiredEquivalentPrivacy)whichhasbeenandcanbecomprimised.

69

WPA RADIUSUsingaRADIUSservertoauthenticatewirelessstationsand

provide a session key to encrypt data during communications.

WPA TypeSelect the type of Wireless Protected Access (WPA) from the

following:

• WPA2 Advanced Encryption Standard (AES):RECOMMENDED—GovernmentstandardpacketencryptionwhichisstrongerthanTKIP.

• WPA Temporal Key Integrity Protocol(TKIP):Generatesa128-bitkeyforeachpacket.

• WPA2 Mixed: MixedmodeallowsclientdevicestofirstassociatetotherouterusingWPA2,andiftheyfailto

connect,thentheyareconnectedviaWPA(TKIP).

RADIUS Server IP AddressEnter the IP address of the server.

RADIUS Server PortEntertheportnumberoftheserver.

RADIUS Server PasswordEnterthepasswordoftheserver.

70

Wired Equivalent Privacy (WEP)

Authentication TypeSelectthetypeofauthenticationfromthefollowing:

• Open System: WirelessstationscanassociatewiththerouterwithoutWEPencryption

• Shared Key: DevicesmustprovidethecorrespondingWEPkey(s)whenconnectingtotherouter

• Auto: TherouterautomaticallydetectswhetherOpenSystemorSharedKeyisbeingused

Key LengthSelectbetween64-bitand128-encryption.

Key TypeSelectthetypeofcharactersusedfortheWEPKey:ASCII

(5characters)orHexadecimal(10characters).

Encryption Key [#]Entertheencryptionkey(s)usedtoencryptthedatapackets

during data transmission.

Enable 802.1x AuthenticationEnableordisable802.1xauthentication.

71

Configuring Filters

WhenEnableWirelessAccessControlisselected,onlywirelessclientswithMACaddresseslistedinthetableareallowedtoconnect

tothewirelessnetwork.

ToviewtheFiltersettings,clickWireless then select Filter.

Enabling Wireless Access ControlSelect“EnableWirelessAccessControl”

DescriptionEnter a description of the device

allowedtoconnecttothenetwork.

MAC AddressEntertheMACAddressofthe

wirelessdevice.

ClickAdd toappendanewdeviceto the list or Reset to discard changes.

WARNING! Incorrectlychangingthesesettingsmaycausethedevicetostopfunctioning.Donotmodifythesettingsinthissectionwithoutathoroughunderstandingoftheparameters.

72

MAC Address Filtering Table

No. (Number)Thesequencenumberofthedevice.

DescriptionThe description of the device.

MAC AddressTheMACaddressofthedevice.

SelectIndicatesthedevice(s)thatcanhaveactionsperformedon

them.

ClickDelete Selected to remove selected devices from the

list.

ClickDelete All to remove all devices from the list.

ClickResettodiscardchanges.ClickApply to save the settings

or Cancel to discard changes.

73

Configuring Wi-Fi Protected SetupWi-FiProtectedSetup(WPS)isanquickandeasywaytoassociateanewwirelessclientdevicetotheencryptedrouterusingaPINor

theWPSbuttonsoneachdevice.

ToviewtheWPSsettings,clickWireless then select WPS.

WPSEnableordisableWPS.

WPS Current StatusDisplayswhetherornotthe

wirelesssecurityisconfigured.

Self Pin CodeAn8-digitPINwhichisrequired

whenconfiguringtherouter

forthefirsttimeinWindows7orVista.

SSIDThenameofthewirelessnetwork.

Authentication ModeThe current security settings for the

correspondingSSID(wirelessnetwork).

Passphrase KeyArandomlygeneratedkeycreatedby

therouterduringtheWPSprocess.

WPS via Push ButtonClick“Start to Process”toactivateWPS.

WPS via PINEnter the PINofawirelessdeviceclick“Start to Process” to

activateWPS.

74

Configuring Client ListViewthewirelessdevicescurrentlyconnectedtotherouter.

ToviewtheClientListsettings,clickWirelessthenselectClient

List.

InterfaceThetypeofnetworkconnectedtothedevice.

MAC AddressTheMACaddressofdeviceconnectedtonetwork.

SignalThesignalstrengthofthedeviceconnectedtothenetwork.

Idle TimeTheamountoftimetheconnecteddevicehasnotbeenactiveon

thenetwork.

ClickRefreshtorefillthelistwithcurrentlyconnecteddevices.

75

Chapter6 Advanced Settings

76

Configuring Advanced SettingsAllowsyoutodefinetheAdvancedSettingsavailableontherouter.

ToviewtheAdvancedsettings,clickWireless then select Advanced.

Fragment ThresholdEnterthemaximumsizeofapacketduringdatatransmission.

Avaluetoolowcouldleadtolowperformance.

RTS ThresholdEntertheRTSthreshold.Ifthepacketsizeissmallerthanthe

RTSthreshold,therouterdoesnotuseRTS/CTStosendthe

data packet.

Beacon IntervalEnterthebeaconinterval.Thisistheamountoftimethatthe

routersetstosynchronizethenetwork.

Delivery Traffic Indication Message (DTIM) PeriodEntertheDTIMperiod.TheDTIMisacountdownperiodinformingclientsofthenextpoint

ofbroadcastandmulticastofmessagesoverthenetwork.Validvaluesarebetween1and255.

N Data RateSelecttheNdatarate.ThisistherateinwhichtheESRSeriesRouterwilltransmitdatapacketstowirelessNcompatibledevices.

WARNING!Incorrectlychangingthesesettingsmaycausethedevicetostopfunctioning.Donotmodifythesettingsinthissectionwithoutathoroughunderstandingoftheparameters.

77

Channel BandwidthSelectthechannelbandwidth.ThefactorydefaultisAuto20/40MHz.Thedefaultsettingprovidesthebestperformancebyauto

selectingchannelbandwidth.

Preamble TypeSelectthepreambletype.LongPreambleprovidesbetterLANcompatibilityandShortPreambleprovidesbetterwirelessperformance.

CTS ProtectionSelectthetypeofCTSprotection.UsingCTSProtectioncanlowerthedatacollisionsbetweenWirelessB(802.11b)andWirelessG

(802.11g)devicesandlowerdatathroughput.

Tx PowerSelectthewirelesssignalstrengthlevel.Validvaluesarebetween25%and100%.


78

Setting Up Parental ControlsOffensivewebcontentcanbeblockedwhenaparentspecifieskeywords.ParentscanalsolimitInternetaccesswithinaspecified

timeandday,withaSchedule. A PolicyisaruleprofilewhichdescribesthekeywordfilterandInternetaccessschedule.Parentscanapply the policy to multiple users or Policy Members.TheParentalControlstoolwillscreenpolicymembersbasedonappliedpolicies.

Configuring the Access Control ListToviewtheACLsettings,clickFirewall then select ACL.

Viewing the Access Control ListTolearnhowtoviewexistingaccesscontrollist,refertoViewing Parental Policies.

Adding a Control PolicyTolearnhowtocreateandaddapolicytotheaccess

control list, refer to Adding a Control Policy.

ToviewtheWizard settings,

click Parental Control then select Wizard.

Enable Parental Control (Access Control)ClicktoenableParentalControl.

Add PolicyClickthebuttontoaddanewcontrolpolicytothe

network.

Policy TableShowsthecontrolpoliciesavailableonthenetwork.

ClickApply to save changes or Cancel to discard them.

Note:Bydefault,everyoneisallowedtoviewallthecontentswithoutanylimitationandfilter.

79

Adding a Control PolicyTherouterprovidesawizardtoguideyouthroughsettingupa

newAccessControlPolicy.

To start the procedure, click the Add Policybutton.

ClickNext to continue the procedure or Cancel to stop the

procedure.

Theprocedureconsistsofthefollowingsteps:

1.EnterauniquenameforyourpolicyinthePolicyName

textfield.

2.ClickPrevtoreturntothepreviousscreen,Nexttocontinue

theprocedure,orCanceltostoptheprocedure.

3. Add target devices to the access control policy.

80

5. Setting up a schedule for the router services.

To set up a Service Schedule,followthesesteps: a. Select Allow from the Schedule option.

b.Clickthedaysthattheschedulewillbeactive.

c.Enterthetimeperiodthattheschedulewillbeactive.

6.ClickPrev to return to the previous screen, Next to continue

the procedure, Save to save the changes, or Cancel to stop

the procedure.

To add a device to the Member List, follow these steps:

a.ClickMAC or IP from the Filter Type option.

b.ClickAddtoshowtheaddclientdialog. c. Enter the name of the device in the Device Nametextfield.

d.EntereitheraMACaddressoranIPaddressintheAddress

fielddependinguponwhichfiltertypeyouchose.

e.ClicktheAdd Device Button to close the screen and

addthedevicetotheMemberList.



the procedure.

81

7.SetupakeywordandURLfilterlist.

Tosetupakeyword/URLfilterlist,followthesesteps:

a. Select Allow from the Filtering option.

b.EnterakeywordorURLintheURL/Keyword text field. c.ClicktheAddbuttontoaddthefiltertothelist. d. Repeat steps a through cforeachfilter.

8.ClickEnable Application Filtertofiltersoftwareapplications.



the procedure.

10.Select Enabletosavewebaccessinformationtoalogfileor Disable to ignore the information.

11.ClickPrev to return to the previous screen, Save to save the

changes, or Cancel to stop the procedure.

82

Viewing Parental PoliciesAvailableparentalcontrolpoliciesareshowninatableandeachpolicycanbeenabledordisabled,edited,anddeleted.

ToviewtheWebsettings,clickParental Control then select Web Monitor.

EnableClicktoenableordisablethecontrolpolicy.

Policy NameShowsthecontrolpolicyname.

Target DeviceShowsthetargetdeviceMACaddressorIPaddress.

ScheduleShowsthecontrolpolicyschedule.

LoggedShowswhetherthecontrolpolicyisstoring

log information.

ModifyEditapolicybyclickingtheEdit Button.

DeleteapolicybyclickingtheDelete Button.

83

Guest NetworkTheGuestNetworkfunctionenablesyoutoofferInternetconnectivitytovisitorsorguestswhilekeepingothernetworkeddevices

(computersandharddrives)andsensitivepersonalorcompanyinformationprivateandsecure.

TheGuestNetworkiscontrolledbytheWirelessSSIDfunction.WhentheGuestNetworkfunctionisenabled,theGuestSSIDcan

onlygettheinternetconnectionfromWAN,butcannotreachtheclientfromtheLANport.

Enabling the Guest NetworkToviewtheSelectionsettings,clickGuest Network then select Selection.

Guest NetworkEnableorDisabletheGuestNetwork

function

Client IsolationGuestclientsareisolatedandcannot

communicatewitheachother.

SSIDChooseaSSIDfortheGuestNetwork

used.TheSSIDcanbedefinedfromtheWirelesssettingpage.


84

Configuring the DHCP Server SettingTheGuestNetworkSSIDshouldbeonadifferentsubnetfromtherouter’sDHCPserver.

ToviewtheDHCPServerSettings,clickGuest Network then select DHCP Server Setting.

Router IP addressDefinetherouterIPaddress

fortheGuestnetwork.

Default Subnet MaskDefinetheSubnetMaskIP

addressfortheGuest

network.

Start IPTodefinetheGuestnetworkDHCPserverstartIP.

End IPTodefinetheGuestnetworkDHCPserverendIP.


85

Viewing the DHCP Client List on the Guest NetworkShowsthelistofguestclientsregisteredonthenetwork.

ToviewtheDHCPClientListsettings,clickGuest Network then select DHCP Client List.

DHCP Client TableShowstheIPaddress,

MACaddress,and

expirationtimeofeach

of the registered clients

on the list.

IP AddressThe IP address of the guest client.

MAC AddressTheMACaddressoftheguestclient.

Expiration TimeThetimethattheguestclient’sDHCPaddresswillexpireandmustberenewed.

ClickRefreshtorefreshtheviewofthelist.

86

IPv6Thereareseveralconnectiontypestochoosefrom:AutoDetection,StaticIPv6,Autoconfiguration(SLAAC/DHCPv6),PPPoE,IPv6

inIPv4Tunnel,6to4,andLink-local.Ifyouareunsureofyourconnectionmethod,pleasecontactyourIPv6InternetServiceProvider.

Enabling IPv6 SettingsToviewtheBasicsettings,clickIPv6thenselectBasic.

BeforeusingorconfiguringtheIPv6protocol,orIPv6passthrough,onanESRSeriesRouteryoumustenableit.

IPv6SelectenabletoconfiguretheIPv6protocolontherouter.

IPv6 PassthroughSelectenabletoallowIPv6passthroughfunctionality.

IPv6mustbedisabledtoenablethisfeature.


Note:IfyouareusingthePPPoEoption,youwillneedtoensurethatanyPPPoEclientsoftwareonyourcomputershasbeenremovedordisabled.

87

Viewing the IPv6 Connection StatusToviewtheStatusinformation,clickIPv6thenselectStatus.

IPv6 Connection InformationShowstheIPv6connectiontype,theLANIPv6link-localaddressandtheDHCP-PD.

LAN IPv6 Computers ListShowsalistofnetworkcomputersandtheirIPv6connectioninformation.

88

Configuring Static IPv6ToviewtheStaticIPv6settings,clickIPv6 then select Static IPv6.

Use Link-Local AddressEnableordisableLANlink-localaddress.

IPv6 AddressEntertheLAN(local)IPv6addressfortherouter.

Subnet Prefix LengthEnterthesubnetprefixlength.

Default GatewayEnterthedefaultgateway.

Primary IPv6 DNS AddressEntertheprimaryIPv6DNSaddress.

Secondary IPv6 DNS AddressEnterthesecondaryIPv6DNSaddress.

LAN IPv6 AddressEntertheLANIPv6address.

LAN IPv6 Link-Local AddressEntertheLANIPv6link-localaddress.

Enable Automatic IPv6 Address AssignmentEnableordisableautomaticIPv6addressassignment.

Autoconfiguration TypeEntertheautoconfigurationtype.(Default:SLAAC+RDNSS).

Router Advertisement LifetimeEntertheIPv6AddressLifetime(inminutes).


89

Setting AutoconfigurationToviewtheAutoConfigurationsettings,clickIPv6 then select Auto Configuration.

Obtain A DNS Server Address AutomaticallyEnableordisableobtainingaDNSserver

automatically.



Enable DHCP-PDEnableordisableDHCP-prefixdelegation(PD).




Autoconfiguration TypeEntertheautoconfigurationtype.(Default:SLAAC+RDNSS)



90

Configuring PPPoEToviewthePPPoEsettings,clickIPv6 then select PPPoE.

Address ModeSelectStaticifyourISPassignedyoutheIPaddress,subnet

mask,gateway,andDNSserveraddresses.Inmostcases,select

Dynamic.

IP AddressEntertheIPaddress(StaticPPPoEonly).

User NameEnter your PPPoE user name.

PasswordEnteryourPPPoEpassword.

Verify PasswordRetypetheyourPPPoEpassword.

Service NameEntertheISPServiceName(optional).

Reconnect ModeSelecteitherAlways-on,On-Demand,orManual.

Maximum Idle TimeEnteramaximumidletimeduringwhichthe

Internet connection is maintained during inactivity.

Todisablethisfeature,enableAuto-reconnect.

MTUMaximumTransmissionUnit-youmayneedtochangetheMTU

foroptimalperformancewithyourspecificISP.1492isthe

defaultMTU.

91

Obtain A DNS Server Address AutomaticallyEnableordisableobtainingaDNSserverautomatically.



Enable DHCP-PDEnableordisableDHCP-prefixdelegation(PD).







92

Configuring 6to4Toviewthe6to4settings,clickIPv6 then select 6to4.

6to4 AddressEnterthe6to4IPaddress.





Enable Automatic IPv6 Address AssignmentEnableordisableautomaticIPv6address

assignment.




93

Viewing Local ConnectionsToviewtheLinkLocalsettings,clickIPv6 then select Link Local.



94

Firewall Setup

Configuring Basic SettingsToviewtheBasicsettings,clickFirewallthenselectBasic.

TheESRSeriesRouterfirewallautomaticallydetectsandblocksDenialofService(DoS)attacks.URLblocking,packetfilteringand

statefulpacketinspection(SPI)arealsosupported.Thedetailsoftheattackandthetimestamparerecordedinthesecuritylog.

FirewallEnableordisablethefirewalloftheESRSeriesRouter.


Note:ThissectionappliestoClientRoutermode.

95

Configuring Advanced SettingsTheroutersupportsVPNpass-throughwhichallowsvirtualprivatenetworking(VPN)packetstopassthroughthefirewall.

ToviewtheAdvancedsettings,clickFirewallthenselectAdvanced.

VPN L2TP Pass-throughClickSelecttoallowanL2TPconnectionmethod

overaVPN.

VPN PPTP Pass-throughClickSelecttoallowaPPTPconnectionmethod

overaVPN.

VPN IPSec Pass-throughClickSelecttoallowanIPSecconnectionmethodoveraVPN.

IPv6 Pass-throughClickSelecttoallowIPv6packetstopassthroughthefirewall.

PPPoE Pass-throughClickSelecttoallowaPPPoEpacketstopassthroughthefirewall.


Note: VPNL2TPPass-through,VPNPPTPPass-through,andVPNIPSecPass-throughareenabledbyfactorydefault.

96

VPN L2TP Pass-throughClickSelecttoallowanL2TPconnectionmethodoveraVPN.

VPN PPTP Pass-throughClickSelecttoallowaPPTPconnectionmethodoveraVPN.

VPN IPSec Pass-throughClickSelecttoallowanIPSecconnectionmethodoveraVPN.

IPv6 Pass-throughClickSelecttoallowIPv6packetstopassthroughthefirewall.

PPPoE Pass-throughClickSelecttoallowPPPoEpacketstopassthroughthefirewall.


Note: VPNL2TPPass-through,VPNPPTPPass-through,andVPNIPSecPass-throughareenabledbyfactorydefault.

97

Configuring Demilitarized ZoneConfiguringadeviceontheLANasaDemilitarizedZone(DMZ)hostallowsunrestrictedtwo-wayInternetaccessforInternet

applications,suchasonlinevideogames,torunfrombehindtheNATfirewall.TheDMZfunctionallowstheroutertoredirectall

packetsgoingtotheWANportIPaddresstoaparticularIPaddressontheLAN.Thedifferencebetweenthevirtualserverandthe

DMZfunctionisthatavirtualserverredirectsaparticularserviceorInternetapplication,suchasFTP,toaparticularLANclientor

server,whereasaDMZredirectsallpackets,regardlessoftheservice,goingtotheWANIPaddresstoaparticularLANclientorserver.

ADMZhostallowsacomputertohaveallitsconnectionsandportscompletelyopenduringdatatransmission.

ToviewtheDMZsettings,clickFirewall then select DMZ.

Enabling DMZClickEnableDMZtoactivateDMZfunctionality.

Local IP AddressEnteranIPaddressofadeviceontheLAN.


WARNING!ThePCdefinedasaDMZhostisnotprotectedbythefirewallandisvulnerabletomaliciousnetworkattacks.DonotstoreormanagesensitiveinformationontheDMZhost.

98

Configuring Denial of ServiceToenableblockingofdenialofservice(DoS)attacks,selecttheDoSoptionintheFirewallsection.DoSattackscanfloodtheInternet

connectionwiththecontinuoustransmissionofdata.BlockingtheseattacksensuresthattheInternetconnectionisalwaysavailable.

ToviewtheDoSsettings,clickFirewall then select DoS.

Block DoSEnableordisableblockingDoSattacks.

Discard Ping on WANICMP(ping)packagesareblocked

whileBlockDoSisenabled.

EnableDiscardPingonWANiftheWANportisrequired.


99

Virtual Private Network SetupAVirtualPrivateNetwork(VPN)providesasecureconnectionbetweentworemotelocationsortwousersovertheInternet.It

providesauthenticationtosecurelyencryptdatacommunicatedbetweenthetworemoteendpoints.TheShortModelNamesupports

upto5VPNtunnels,makingitidealforsmall-office/home-officeusersoremployeeswhoworkfromhomebutneedtocommunicate

securelybacktothemainoffice.

Viewing StatusToviewtheStatussettings,clickVPN then select Status.

No. (Number)ThesequencenumberoftheVPNtunnel.

NameThenameoftheVPNtunnel.

TypeThetypeofVPNtunnel.

Gateway/Peer IP AddressTheVPNgatewayorpeerIPaddress.

Transmit PacketsThenumberofpacketstransmitted.

Received PacketsThenumberofpacketsreceived.

UptimeTheamountoftimetheVPNhasbeenactive.

SelectIndicatesthedevice(s)thatcanhaveactionsperformedonthem.

100

Configuring a VPN Tunnel ProfileToviewtheStatussettings,clickVPNthenselectStatus.

ManuallyconfigureaVPNtunnelprofile.

Creating a Profile

• ClickAdd tocreateanewVPNtunnelprofile.• ClickEdittoeditthesettingsoftheselectedprofile.• ClickDelete Selectedtodeletetheselectedprofile.• ClickDelete All todeleteallcurrentprofiles.

101

GeneralFormanuallyconfiguringaVPNtunnelprofile.

Name: Enterthenameforthisprofile.

Connection Type: Clickthedrop-downmenutoselecttheconnectiontype(PPTP,L2TP,IPSec,L2TPoverIPSec).

Authentication Type:Clickthedrop-downmenutoselecttheauthentication type.

Shared Key:Enterthesharedkeytobeusedforthisprofile.

Confirm: Enterthesharedkeyasecondtimetoconfirmtheshared key.

Local ID Type:Clickthedrop-downmenutoselectthetypeofIDusedforthisprofile(IPaddress,DomainName,Email

Address).

Local ID: EnterthelocalIDdesignationbasedondefinitiontypefromLocalIDType,previousfield.

Peer ID type: Clickthedrop-downmenutoselectthetypeofPeerIDforthisprofile(IPaddress,DomainName,Email

Address).

Peer ID: EnterthePeerIDdesignationbasedondefinitiontypefromPeerIDType,previousfield.

Apply: ClickApply to save the changes.

Cancel: ClickCancel to delete the changes.

102

SA (Security Association)IKE(InternetKeyExchange)isconfiguredintwonegotiations.

Phase1authenticatestheVPNClientstoeachotherby

confirmingthematchingPre-SharedKeywiththetwogateways.

IPSecisthePhase2oftheVPNprocess.

Manually configuring a VPN tunnel profile.

IKE (Phase 1) ProposalExchange:Clickthedrop-downmenutoselectthetypeof

exchange(MainMode,AggressiveMode).

DH Group:Clickthedrop-downmenutoselecttheDHgroup(group1,group2,group5,group14).

Encryption: Clickthedrop-downmenutoselectthetypeofencryption(DES,3DES,AES128,AES192,AES256).

Authentication: Clickthedrop-downmenutoselecttheauthenticationprotocol(MD5,SHA1).

Life Time: Enter the life time value for Phase 1. The life time

valueshouldbegreaterthanPhase2(IPSec).86400sec.(1day)

is a common default and is a normal value for Phase 1.

IPSec (Phase 2) ProposalProtocol: Clickthedrop-downmenutoselecttheprotocoltype(ESP,AH)

Encryption: Clickthedrop-downmenutoselectthetypeofencryption(DES,3DES,AES128,AES192,AES256).

Authentication: Clickthedrop-downmenutoselecttheauthenticationprotocol(MD5,SHA1).

Perfect Forward Secrecy (PFS):SelectenabletoenablePFS.AfreshDHkeyisgeneratedduringIKEphaseIIandrenewedfor

eachkeyexchangetoeliminatedependenciesbetweenthe

keys.

DH Group: Clickthedrop-downmenutoselecttheDHgroup(group1,group2,group5,group14).

Life Time: Enter the life time value for Phase 2. The life time

valueshouldbesmallerthanPhase1(IKE).3600sec.(1hour)

is a common value for Phase 2.

Apply: ClickApply to save the changes.

Cancel:ClickCancel to delete the changes.

103

Network


Security Gateway Type:Clickthedrop-downmenutoselecttheSecurityGatewayType(IPAddress,DomainName)

Security Gateway: EnterthegatewayvalueasdefinedinSecurityGatewayType.

Local NetworkLocal Address: EntertheIPaddressofthelocalPC.Local Netmask: EnterthenetmaksofthelocalPC.

Remote NetworkRemote Address: EntertheIPaddressoftheremotePC.Remote Netmask: EnterthenetmaskoftheremotePC.Apply: ClickApplytosavethechanges.Cancel: ClickCanceltodeletethechanges.

104

Advanced


NAT Traversal: SelectenabletoenabletheNATTraversalfunctioninordertohidetheprivateIPaddressfrompublicview.

Note: ServicessuchasVoIPrequiretheuseofaprivateIP address.

Dead Peer Detection:Apply: ClickApplytosavethechanges.Cancel: ClickCanceltodeletethechanges.

105

Configuring a User SettingTheUserSettingfunctionallowsyoutocreateuserprofiles

inordertosetuploginaccesstotheVPNservice.

NameEnterthenameofthenewuserprofile.

PasswordEnterthepasswordfortheusername.

ConfirmEnterthepasswordasecondtimetoconfirmthesetting.

AddClickAddtoaccepttheprofileandaddittotheCurrentVPNUser

Table.

ResetClickResettoclearthenewsettings.

Current VPN User TableDisplaystheUserID,UserNameandSelectionstatus.

Delete SelectedClicktodeletetheselecteduserprofile.

Delete AllClicktodeleteallthecurrentuserprofiles.

ResetClicktocleartheselectionsfromtheCurrentVPNUserTable.

ApplyClicktoacceptsavethenewsettings.

CancelClicktoclearthenewchanges.

106

USB PortTheEPG5000routerisequippedwithaUSBportforconnectingaharddrivesomediacontentcanbeaccessedortransferredtoother

devicesinthehomeordevicesawayfromhome.

Viewing EnShareTheEnSharefeatureallowsyoutoaccessmedia

contentstoredonaUSBharddriveconnectedtothe

router’sUSBportinthehomeandwhenyouareaway

fromhomewhenyouhaveaccesstotheInternet.

By default the EnShare feature is enabled.

To view the EnShare settings or disable EnShare, click USB Port then select EnShare.

1. Select DisabletodisabletheEnSharefeature.2.ClickApplytosavethenewsettings.

File SharingTheFileSharingfunctionallowsyoutoprovideusers

theabilitytosharefilesoverthenetworkthroughthe

Sambaservice.By default the EnShare feature is enabled.

ToviewtheFileSharingsettings,clickUSB Port then select File Sharing.

1. Select EnabletoenabletheSambaServicefunction.2.ClickApplytosavethenewsettings,orclickCancel to delete the changes.

107

Viewing File ServerTheFileServerfunctionallowsyoutoprovidenetworkusersFTPaccesstosharedUSBstoredfiles.

ToviewtheFileServersettings,clickUSB Port then select File Server.

Enable FTP ServiceSelectthistoenabletheFTPservicetosharefilesontheUSB

device

Port NumberDefinetheportnumber(default:21)toopenfortheFTPservice.

Login TimeoutDefinetheperiodofinactivity(default:90)beforeauseris

logged out.

Stay TimeoutDefinethelockoutperiod(default:90)beforeauserisallowed

to attempt a login.

Login UserDefinethenumberofconcurrentuserstoaccesstheservice

(Max:20users)

Share ModeDefinethetypeofsharepriviledge:Read/Write,Readonly.

Use Anonymous LoginSelectthistoallowanonymoususerlogin.

User NameEnter the user name to login to the FTP service.

PasswordEnterthepasswordtologintotheFTPservice.

108

Viewing DLNATheDLNAMediaServerfunctionallowsyoutotransferphotos,musicandvideobetweennetworkeddevicesthroughtheESRSeries

Router.

ToviewtheDLNAsettings,clickUSB Port then select DLNA.

1. Select EnabletoenabletheDLNAMediaServerfunction.2.IntheShareFolderName,enterthenameofthesharedfolder.

3.ClickApplytosavethenewsettings,orCancel to clear the changes.

109

Advanced Network Settings

NAT SetupNetworkAddressTranslation(NAT)allowsusersontheLANtoaccesstheInternetthroughasinglePublicIPAddressormultiple

PublicIPAddresses.NATprovidesfirewallprotectionfromhackerattacksandallowsformappingLANIPaddressestoWANIP

addresseswithkeyservicessuchaswebsites,FTP,andvideogameservers.

ToviewtheNATsettings,clickAdvanced then select NAT.

NATEnableorDisabletheNAT.

Network TurbineEnableorDisablethenetworkturbine.

Note: Thenetworkturbineisdesignedtoimprovetherouter’sperformance.Thereisabout20~30%improvementwhenthenetworkturbineisenabled.

Note: ThenetworkturbinemaycauseproblemswiththeInternetconnection.Disablethenetworkturbinefunctionifyouexperience

connection issues.


110

Port Mapping SetupPortMappingallowsyoutoredirectaparticularrangeofserviceportnumbersfromtheWANtoaparticularLANIPaddress.

ToviewthePortMappingsettings,clickAdvanced then select Port Mapping.

Enable Port MappingClickEnablePortMappingtoactivateportmapping.

DescriptionEnternotesordetailsaboutthemappedportrange

configuration.

Local IPEnterthelocalIPaddressoftheserverbehindthe

NATfirewall.

ProtocolSelecttheprotocoltouseformappingfromthefollowing:TCP,UDPorBoth.

Port RangeEntertherangeofportstobeforwarded.

ClickAddtoappendanewdevicetothelistorReset to discard changes.

111

Current Port Mapping TableDisplaysalistofmappedportrangesinuseonthenetwork.

No. (Number)Thesequencenumberofthemappedportrange.

DescriptionNotesordetailsaboutthemappedportrange.

Local IPIP address of the server for the mapped port range.

TypeTheprotocolusedtocommunicatewiththeWANportsandLAN

server.

Port RangeThe range of mapped ports.

SelectIndicatesthedevice(s)thatcanhaveactionsperformedonthem.

ClickDelete Selected to remove selected devices from the list.

ClickDelete All to remove all devices form the list.

ClickReset the discard changes.


112

Port Forwarding SetupPortforwardingenablesmultipleserverapplicationsonaLANtoserveclientsonaWANoverasingleWANIPaddress.Therouter

acceptsincomingclientpackets,filtersthembasedonthedestinationWAN,orpublic,portandprotocolandforwardsthepacketsto

theappropriateLAN,orlocal,port.UnliketheDMZfeature,portforwardingprotectsLANdevicesbehindthefirewall.

ToviewthePortForwardungsettings,clickAdvanced then select Port Forwarding.

Enable Port ForwardingClickEnablePortForwardingtoactiveportforwarding.

DescriptionEnternotesordetailsabouttheforwardedportconfiguration.

Local IPEnterthelocalIPaddressoftheserverbehindtheNATfirewall.

ProtocolSelecttheprotocoltouseformappingfromthefollowing:TCP,

UDPorBoth.

Local PortEntertheLANportnumberthatWANclientpacketswillbe

forwardto.

Public PortEntertheWANportnumberthatclientswillsendtheirpackets

to.

ClickAddtoappendanewconfigurationtothetableorResetto discard changes.

113

Current Port Forwarding TableThetableofcurrentportforwardingconfigurations.

ClickDelete Selected to remove selected devices from the list.




114

Port Triggering SetupSomeapplications,suchasonlinegames,videoconferencingandVoIPtelephony,requiremultipleportsforinboundandoutbound

traffic.Ifanapplicationrequiressimultaneoususeofincomingandanoutgoingports,configureporttriggeringtomapalocalportor

rangeofportstoaspecificpublicport.Sendingpacketsoutoverthelocalporttriggerstheroutertoopenanincominglocalportthat

ismappedtothesamepublicportandapplicationastheoutgoinglocalport(s).Thelocalapplicationcancommunicateoverthe

incomingandoutgoingportswithouttheneedforcreatingafixedaddress.

ToviewthePortTriggeringsettings,clickAdvanced then select Port Triggering.

Enable Port TriggeringClickEnableTriggerPorttoactivateporttriggering.

DescriptionEnternotesordetailsabouttheporttriggeredconfiguration.

Popular ApplicationsSelectadefaultapplicationoraddanewone.

Trigger PortEntertheapplication’soutboundportnumber(s).

Trigger TypeSelecttheprotocoltouseforporttriggeringfromthefollowing:

TCP,UDPorBoth.

Public PortEntertheinboundport(s)fortheapplicationinthefollowing

format:2300-2400or47624.

115

Public TypeSelecttheprotocoltousefortheinboundportfromthefollowing:TCP,UDPorBoth.

ClickAdd toappendanewconfigurationtothetableorReset to discard changes.

Current Port Triggering TableThelistofcurrentporttriggeringconfigurations.

ClickDeleteSelectedtoremoveselecteddevices

from the list.



ClickApplytosavethesettingsorCanceltodiscardchanges.

116

Application Layer Gateway SetupTheALG(ApplicationLayerGateway)servesasawindowbetweencorrespondentapplicationprocessessothattheymayexchange

information on an open environment.

ToviewtheALGsettings,clickAdvanced then select ALG.

SelectthelistedapplicationsthatneedALGsupportandthentherouterwillauthorizethemtopassthroughtheNATgateway.


117

Universal Plug and Play SetupUPnPhelpsinternetdevices,suchasgamingandvideoconferencing,toaccessthenetworkandconnecttootherregisteredUPnP

devices.

ToviewtheUPnPsettings,clickAdvanced then select UPnP.

ClickEnable or Disable to activate or deactivate UPnP.


118

Internet Group Multicast Protocol SetupInternetGroupMulticastProtocol(IGMP)isanetwork-layerprotocolusedtoestablishmembershipinamulticastgroup.

ToviewtheIGMPsettings,clickAdvanced then select IGMP.

ClickEnable or Disable toactivateordeactivateIGMP.ClickApply to save the settings or Cancel to discard changes.

Note: DisablingtheMulticastfunctionmaycauseIPbasedmultimediadevices,suchasanIP-STBorOTTbox,mayloseconnectivitywiththemediastreamingserver.

119

Quality of Service SetupQoScanprioritizebandwidthusesuchasvideostreaming,onlinegaming,VoIPtelephonyandvideoconferencingtoensurestable

andefficientnetworkperformance.

ToviewtheQoSsettings,clickAdvanced then select QoS.

Total Bandwidth SettingsUplinkSelectthemaximumbandwidthspeedforoutbound

traffic.

DownlinkSelectthemaximumbandwidthspeedforinbound

traffic.

Note:ClickDisabled ifyoudonotwanttoprioritizeanydataorprotocol.

120

Priority QueueSetnetworkresourceusagebasedonspecificprotocolsorportranges.Incomingpacketsareprocessedbasedontheprotocols’

positionwithinthequeue.

Unlimited Priority QueueLocal IP AddressEnterthelocalIPaddressofadeviceonthenetwork.

Thisdevice’sactivityisnotrestrictedbytheQoSfeature.

High/Low Priority QueueSpecify the priority for different protocols. Additional

protocolsandportrangescanbeadded.

ClickApply to save the settings or Cancel to discard

changes.

121

Bandwidth AllocationSetnetworkresourceusage,forinboundandoutboundtraffic,basedonlocalIPandportranges.

TypeSelectDownloadorUploadtospecificthedirectionofpacket

traffic.

Local IP RangeEnterthelocalIPrangeofthecurrentconfiguration.

ProtocolSelecttheprotocoltomanageforthecurrentconfiguration.

Port RangeEnterthelocalportrangeofthecurrentconfiguration.

PolicySelectMinorMaxtospecifythetypeofconfigurationpolicy.

Rate (bps)Selectthebandwidthrate,inbitspersecond(bps),ofthecurrentconfiguration.

ClickAdd tosavethesettingsandlisttheconfigurationintheCurrentQoStableorReset the discard changes.


122

Routing SetupTypicallystaticroutingdoesnotneedtobesetupbecausetherouterhasadequateroutinginformationafterithasbeenconfigured

forInternetaccess.Staticroutingisonlynecessaryiftherouterisconnectedtonetworkunderadifferentsubnets.

ToviewtheRoutingsettings,clickAdvanced then select Routing.

Note: Toenableastaticrouting,NATmustbedisabled.Iftherouterisconnectedwithanetworkunderthedifferentsubnet,theroutingsetupallowsthenetworkconnectionwithintwodifferentsubnets.

Enable Static RoutingClickEnableStaticRoutingtoactivatethefeature.

Destination LAN IPEntertheLANIPaddressofthedestinationdevice.

Subnet MaskEntertheSubnetMaskofthedestinationdevice.

Default GatewayEnterthedefaultgatewayIPaddressforthedestinationdevice.

HopsEnterthemaximumnumberofhopswithinthestaticrouting

thatapacketisallowedtotravel.

InterfaceSelectLANorWANastheinterface.

ClickAddtosavethesettingsandlisttheconfigurationintheCurrentStaticRoutingtableorReset the discard changes.

View and select devices in the Current Static Routing Table.ClickDelete Selected or Delete All to remove devices

fromthetable.ClickReset to stop.


123

Wake on LAN SetupWakeonLANsetup(WOL)allowstheadministratortoactivateacomputeroverthenetwork.

ToviewtheWOLsettings,clickAdvanced then select WOL.

Enabling WOL over WAN ClickEnable WOL over WAN to activate the feature.

Server Port Enter the server port of the device to activate.

Wake MAC Address EntertheMACaddressofthedevicetoactivate.

ClickStart to activate the device.


124

Tools Setup

Configuring the Administrator AccountChangetherouter’ssystempasswordaswellassetupadevice

toremotelyconfigurethesettings.

ToviewtheAdminsettings,clickTools then select Admin.

• Login Name:Keeporchangeexistingloginname• Old Password:Entertheexistingadministratorpassword• New Password:Enterthenewadministratorpassword• Repeat New Password: Re-typethenewadministratorpassword• Graphical Authentication: ToenableordisableCAPTCHA

Remote Management• Host Address: Enter the designated host IP Address.

• Port: Entertheportnumber(Default:8080)forremoteaccessingmanagementwebinterface.

• Enable:Selecttoenableremotemanagement.


Note: To access the settings of the ESR Series Router remotely, entertherouter’sWANIPaddressandportnumber.

125

System Time SettingChangethesystemtimeoftheESRSeriesRouterandsetupautomaticupdatesthroughanetworktime(NTP)protocolserveror

through a computer.

ToviewtheTimesettings,clickTools then select Time.

Synchronizing with an NTP Server

Time SetupSelecthowtheESRSeriesRouterobtains

the current time.

Time ZoneSelectthetimezonefortheESRSeriesRouter.

NTP Time ServerEnterthedomainnameorIPaddressofanNTPserver.

Enabling Daylight SavingsClicktoenableordisabledaylightsavingstime.

Start TimeSelectthedateandtimewhendaylightsavingstimestarts.

End TimeSelectthedateandtimewhendaylightsavingstimeends.


126

Synchronizing Time with a Computer

Time SetupSelecthowtheESRSeriesRouterobtainsthecurrenttime.

Computer Date and TimeDisplayssystemdateandtimefromacomputer.

Enable Daylight SavingClicktoenableordisabledaylightsavingstime.

Start TimeSelectthedateandtimewhendaylights

savings time starts.

End TimeSelectthedateandtimewhendaylightssavingstimeends.


127

Dynamic Domain Name Service (DDNS) SetupThemostcommonuseforDDNSisinallowinganInternetdomainnametobeassignedtoacomputerwithavarying(dynamic)IP

address.ThismakesitpossibleforothersitesontheInternettoestablishconnectionstothemachinewithoutneedingtotracktheIP

address themselves.

ToviewtheDDNSsettings,clickTools then select DDNS.

Dynamic DNSClicktoenableordisableDDNS.

Server AddressSelect the server address.

Host NameEnter the host name.

UsernameEnter a username for the host service.

PasswordEnterapasswordforthehostservice.


128

Diagnosis that Client Devices Are Connected to the RouterThediagnosisfeatureallowstheadministratortoverifythataclientdeviceisavailableonthenetworkandisacceptingrequest

packets.Ifthepingresultreturnsalive,itmeansadeviceisconnected.Thisfeaturedoesnotworkifthetargetdeviceisbehinda

firewallorhassecuritysoftwareinstalled.

ToviewtheDiagnosissettings,clickTools then select Diagnosis.

Diagnosing a Network Connection Problem

Address to PingEnter IP address of the device to ping.

Ping FrequencySelect the interval, in seconds, that the ping message is sent out.

ClickStarttobeginthediagnosis.

129

Upgrading The Router’s FirmwareFirmwareistherouter’ssystemsoftwarethatoperatesandallowstheadministratortointeractwithit.

ToviewtheFirmwaresettings,clickTools then select Firmware.

WARNING! Upgradingfirmwarethroughawirelessconnectionisnotrecommended.FirmwareupgradingmustbeperformedwhileconnectedtoanEthernet(LANport)withallotherclientsdisconnected.

Toupdatethefirmwareversion,followthesesteps:

1.DownloadtheappropriatefirmwareapprovedbyEnGeniusfromanEnGeniuswebsite.SeetheDownloads tab on the product page for this product.Fornewproducts,newfirmwaremaynotbereadilyavailable.2.ClickChoose File.

3.Browsethefilesystemandselectthefirmwarefile.

4.ClickApply.

130

Backing Up The Router’s SettingsSavethemasaconfigurationfileonyourcomputer.

ToviewtheBack-upsettings,clickTools then select Back-up.

Restoring to the router’s Factory Default settingsClickResettorestoretheESRSeriesRoutertofactorydefaults.

Backup SettingsClickSave tosavethecurrentconfigurationontheroutertoa*.dlffile.

Restore SettingsTorestoresavedsettings,dothefollowing:

a.ClickChoose File.

b.Browsethefilesystemforlocationofthesettingsfile(*.dlf).

c.ClickUpload.

131

Rebooting the RouterThisfeatureallowsyoutoreboottherouterintheeventofasystemhanguporotherdisruptiontothenetwork.

ToviewtheResetsettings,clickTools then select Reset.

ClickApply to reset the device.

132

Appendix

133

Wall Mounting The RouterThefollowingareinstructionsifyouchoosetomounttherouterona

wall.

Note: ChoosealocationthatiswithinreachofanelectricaloutletfortheACadapterandtheDSLorCablemodem.

Tomountthedeviceonthewalldothefollowing:

1.Measurethedistancefromthemiddleofeachmountingscrewhole.

2.Markthelocationsofthescrewholesonthewall.

3.Drillaholeforeachmarkedlocationandinsertascrewineach.

Note: Makesuretoleaveenoughofthescrewheadabovethewallsurfacetosecuretherouter.

4.Installandsecurethemountsontotherouter.

5.Installtherouteronthewall.

134

Federal Communication Commission Interference StatementThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15ofthe

FCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.

Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe

instructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnot

occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbe

determinedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneofthefollowing

measures:

• Reorient or relocate the receiving antenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmful

interference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.

Thistransmittermustnotbeco-locatedoroperatinginconjunctionwithanyotherantennaortransmitter.

Operationsinthe5.15-5.25GHzbandarerestrictedtoindoorusageonly.

FCC Radiation Exposure Statement Important:ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance29cmbetweentheradiator&yourbody.

135

Europe – EU Declaration of ConformityThisdevicecomplieswiththeessentialrequirementsoftheR&TTEDirective1999/5/EC.Thefollowingtestmethodshavebeen

appliedinordertoprovepresumptionofconformitywiththeessentialrequirementsoftheR&TTEDirective1999/5/EC:

• EN60950-1

SafetyofInformationTechnologyEquipment

• EN50385

Genericstandardtodemonstratethecomplianceofelectronicandelectricalapparatuswiththebasicrestrictionsrelatedto

humanexposuretoelectromagneticfields(0Hz-300GHz)

• EN300328

ElectromagneticcompatibilityandRadiospectrumMatters(ERM);WidebandTransmissionsystems;Datatransmission

equipmentoperatinginthe2,4GHzISMbandandusingspreadspectrummodulationtechniques;HarmonizedENcovering

essentialrequirementsunderarticle3.2oftheR&TTEDirective

• EN301893

BroadbandRadioAccessNetworks(BRAN);5GHzhighperformanceRLAN;HarmonizedENcoveringessentialrequirementsof

article3.2oftheR&TTEDirective

• EN301489-1

ElectromagneticcompatibilityandRadioSpectrumMatters(ERM);ElectroMagneticCompatibility(EMC)standardforradio

equipmentandservices;Part1:Commontechnicalrequirements

• EN301489-17

ElectromagneticcompatibilityandRadiospectrumMatters(ERM);ElectroMagneticCompatibility(EMC)standardforradio

equipmentandservices;Part17:Specificconditionsfor2,4GHzwidebandtransmissionsystemsand5GHzhighperformance

RLANequipment

Thisdeviceisa5GHzwidebandtransmissionsystem(transceiver),intendedforuseinallEUmemberstatesandEFTAcountries,exceptin

FranceandItalywhererestrictiveuseapplies.

136

InItalytheend-usershouldapplyforalicenseatthenationalspectrumauthoritiesinordertoobtainauthorizationtousethedevicefor

settingupoutdoorradiolinksand/orforsupplyingpublicaccesstotelecommunicationsand/ornetworkservices.

ThisdevicemaynotbeusedforsettingupoutdoorradiolinksinFranceandinsomeareastheRFoutputpowermaybelimitedto10mWEIRP

inthefrequencyrangeof2454–2483.5MHz.Fordetailedinformationtheend-usershouldcontactthenationalspectrumauthorityinFrance.

Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk [Danish] Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsen-tlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch [German] Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden An-forderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Eesti [Estonian] Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment] vastavust direk-tiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.

English Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español [Spanish] Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

Français [French] Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Italiano [Italian] Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski [Latvian] Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių [Lithuanian] Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direk-tyvos nuostatas.

Nederlands [Dutch] Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

0560

137

Malti [Maltese] Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet essenzjali u ma provved-imenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Magyar [Hungarian] Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Polski [Polish] Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português [Portu-guese]

[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras dis-posições da Directiva 1999/5/CE.

Slovensko [Slovenian] [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.

Slovensky [Slovak] [Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.

Suomi [Finnish] [Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite on direk-tiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Svenska [Swedish] Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och övri-ga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

138

Industry Canada statementThisdevicecomplieswithRSS-210oftheIndustryCanadaRules.Operationissubjecttothefollowingtwoconditions:(1)This

devicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethat

may cause undesired operation.

CedispositifestconformeàlanormeCNR-210d’IndustrieCanadaapplicableauxappareilsradioexemptsdelicence.Son

fonctionnementestsujetauxdeuxconditionssuivantes:(1)ledispositifnedoitpasproduiredebrouillagepréjudiciable,et(2)ce

dispositifdoitacceptertoutbrouillagereçu,ycomprisunbrouillagesusceptibledeprovoquerunfonctionnementindésirable.

Reorient or relocate the receiving antenna.

Caution: (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Avertissement: (i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

RadiationExposureStatement:

ThisequipmentcomplieswithICradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbe

installedandoperatedwithminimumdistance29cmbetweentheradiator&yourbody.

Déclarationd’expositionauxradiations:

Cetéquipementestconformeauxlimitesd’expositionauxrayonnementsICétabliespourunenvironnementnoncontrôlé.Cet

équipementdoitêtreinstalléetutiliséavecunminimumde29cmdedistanceentrelasourcederayonnementetvotrecorps.

Documents

User Manual - EnGenius · 2017. 6. 26. · Industry Canada Statement.....137. 5 Chapter 1 Product Overview. 6 Maximum data rates are based on draft IEEE 802.11ac ... VPN Server (PPTP/L2TP)