Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
USER MANUAL
� 1
TABLE OF CONTENTS
Your Cambox Isi3 4To start 5Fastening of your Cambox 8Set the viewing angle 10Playback of your content 11Charge the battery 12Connect my smartphone 14Install the mobile application 15Discover the Cambox APP 16Trouble shooting 19Instructions to respect 20Camera features 21
� 2
GENERAL INFORMATION
CUSTOMER SUPPORT
Cambox ensure to give the best support for customers. You can contact us by mail at [email protected] or by our facebook page or facebook messenger #camboxhorse.
REGISTERED BRANDS AND PATENTS
The CAMBOX brand and all its derivatives are registered trademarks protected by international laws on copyright. The design of the Cambox camera is protected by different registered international patents : France : FR 3005714 USA patent : US 2016:0119512 AUS patent : AU 2014267077 European Union : EP 2997294
For more information regarding registered brands and patents, you can send us an email at [email protected] TM & © 2018 CAMBOX. All rights reserved
Cambox Horse, 71 rue Georges CHARPAK, P.A. De la Lande Saint-Martin, 44115 Haute-Goulaine, FRANCE.
� 3
YOUR CAMBOX ISI3
Memory card slot (2 to 64 Gb Max)
On/Off button (3sec.) // Record/Pause (1 sec)
Reset button (use a clip)
USB socket : battery charge and files transfer
Activation button of the wifi antenna (1sec)
EXPLANATION OF THE LED STATUS
GREEN : Status ON HD720
BLUE : FULLHD 1080
RED : Charging in process
YELLOW : WIFI antenna enable
� 4
1 3
2
5
4
21
3
45
TO START
Turn on / start the camera Press the ON/OFF button for 3 seconds.
Long press of 3 seconds
The green led (6) and the blue led (7) turn on simultaneously indicating that the camera is on.
TO START
� 5
6 7
Video recording starts automatically !
After a few seconds, the Cambox vibrates twice and the LED starts to blink every second indicating that the video recording is on, 2 modes are available :
BLUE LED blinking Video record is on
FULL HD 1080 mode 30 frames / second
GREEN LED blinking Video record is on
HD 720 mode 60 frames / second
� 6
Before using your Cambox, be sure to check the following points : 1) that the battery is fully charged
2) that you have enough free space available on your memory card
All those information are at your disposal via the application
!
BZZZz BZZZz
Pause / Record
1 simple push
STOP THE RECORD (PAUSE)
The Cambox emits 1 vibration and the LED becomes solid.
RELAUNCH THE RECORD
The Cambox emits 2 vibrations and the LED starts blinking again every second indicating that the video record is on.
� 7
BZZZz
BZZZz BZZZz
FASTENING OF YOUR CAMBOX
PREPARATION
Prior to stick, it is recommended to place the fastener under your visor in order to memorize its future position. Remove meticulously the paper protection of the velcro in such a way that your fingers do not touch the adhesive part.
COLLER LA FIXATION Place the velcro fastener under the visor and press strongly on all the surface in order to ensure a good fastening.
� 8
IMPORTANT !
The velcro fastener needs to be stored at least during 4 hours in a temperate and non moist atmosphere to ensure a maximum grip of the glue.
!
ATTACH MY CAMBOX
Present the Cambox horizontally in front of its velcro support.
Apply a pressure on the 3 Cambox points as on the image opposite in order to ensure a good fastening between the 2 fasteners.
REMOVE MY CAMBOX
Grab the strap on the edge of the Cambox wing and pull the strap upward while doing a circular movement toward the center of the Cambox.
Once the first wing is detached from its velcro support, accompany the unfastening process of the Cambox by applying the same vertical and circular effort.
Remove the central part and apply the vertical and circular effort towards the extremity of the Cambox to end the removing operation.
� 9
CAUTION ! Make sure that the velcro fastener support is in good condition and that there is no foreign matter that could hinder the fastening of the camera. In that case, plan the replacement of the velcro by a new original one.
!
SET THE VIEWING ANGLE
ADJUST THE LENS
The central part of the Cambox has a central tipper that allows to modify the viewing angle on 40°. The selection of the angle is made easy and maintained thanks to its integrated notches system.
CHECK THE VIEWING ANGLE
In order to define accurately the desired viewing angle, download and install the application on your smartphone to check in real time your viewing angle thanks to the live preview.
� 10
-5°
30°
CAUTION ! During the viewing angle set up, be careful not to touch the camera lens with your finger as this could result in blurred or degraded images. Before every use, it is recommended to clean the camera lens using the provided cleaning cloth.
!
PLAYBACK OF YOUR CONTENT
VIA USB CORD
Plug the USB cord between your Cambox and your computer, it will automatically detect a new device.
VIA THE MEMORY CARD
Push briefly on the memory card to remove it.
If you do have a micro SD card reader on your tablet or smartphone, insert the memory card directly.
If you do only have a SD reader on your computer, insert the microSD in the supplied SD adapter.
VIA WIFI
Enable the wifi and launch the application on your smartphone (see page 14)
� 11
IMPORTANT ! Once the device detected, you will find a device called Cambox ISI3 in which you will find your videos and photos.
!
CHARGE THE BATTERY
PLUG THE USB CORD
Open the rubber flap and plug the USB socket
RECHARGE IN PROGRESS, LISTENING MODE...
Once the USB socket plugged to an external source*, the green, blue and red leds appear simultaneously.
With this charging mode it is still possible to launch a record or enable the wifi.
RECHARGE IN PROGRESS, STANDBY MODE ...
After 3 minutes of charge, the Cambox emits a vibration and a red light appears indicating the recharge is in progress.
� 12
BZZZz
BATTERY INFORMATION
It takes about 2 hours to fully recharge the battery via a 230 V USB power outlet.
The recharging time might be longer if you are plugging the Cambox to another source (car USB charger, computer, etc...)
The Cambox emits 3 vibrations in order to indicate that the battery level is to low and the extinction is imminent !
You can verify the camera battery level by launching the smartphone application. (See page 22)
� 13
230 Volts
24 Volts
BZZZz BZZZz BZZZz
CAUTION ! If your Cambox automatically turns off a few seconds after having turning it on, this is due either to a too low battery level or to a full memory card (not enough free space to record datas on the card).
!
CONNECT MY SMARTPHONE
1) ENABLE THE INTEGRATED WIFI ANTENNA
1 short impulse !
The Cambox will display a new yellow blinking LED to confirm that the WIFI antenna is enable and ready to be paired.
2) PAIR WITH YOUR SMARTPHONE
Select in your smartphone WIFI settings the network called Cambox Isi3, and enter the default password : WIFI Password
Once the connexion is established between your smartphone and the Cambox, the yellow LED will stop blinking and will turn solid.
� 14
12345678
DOWNLOAD THE MOBILE APP
Free application
« Cambox, Capture and Share »
You have to install this application on your smartphone in order to interact wirelessly with your Cambox Isi3 wifi camera.
This application allows you to :
• Visualize in real time your viewing angle • Check the status of your camera • Start / stop a video • Take a photo • Change the settings • Access to your videos and photos gallery • Download / delete your files
� 15
IMPORTANT !
To interact with your smartphone, it is necessary to enable the wifi antenna of your Cambox camera. To do so, see instructions on page 9.
!
DISCOVER THE MOBILE APP
HOME MENU
� 16
Gallery Access
Photo/video Button Settings
Access
Video ModePhoto Mode
Menu
Battery Level
Live viewing
Free Space Available
Settings Summary
SETTINGS EDITION
VIDEO MODE SETTINGS
In this menu you can change the video resolution between FULLHD 1080 at 30 fps or HD 720 at 60 fps. The Cambox automatically create a new storage file every X minutes. You can select an interval of 5, 15 or 30 minutes. For a nomad use via Wifi, foster the setting on 5 minutes in order to download the files on your phone faster. You can also modify the brightness settings by intervening on the white balance and on the exposure settings.
PHOTO MODE SETTINGS You can here choose another level of resolution and define the mode either on single photo or gust mode.
CAMERA SETTINGS If the Cambox is on and is not recording (pause mode), the camera can switch off automatically.
WIFI SETTINGS You can define your own Wifi network name and a new password (you will have to restart the Cambox).
� 17
� 18
Thumbnail
DateTime
File name
Size
LengthDetailed
information for each file
Filter videos or photos files
Total storage capacity of the SD
card
Disk space usage
Access to the files of your phone
Access to the file of the Cambox
Delete or download a file
IMPORTANT !
To display the deletion or download menu : For iOS : slide your finger to the left of the screen For Android : press the screen for 3 seconds
!
TROUBLE SHOOTING
� 19
Symptom Causes & solutions
The Cambox can be turned on but then turns off
automatically after a few seconds
1) Not enough free space available on the memory card
2) Low battery 3) Memory card missing 4) Uncompatible memory card (from 2 to 64 Gb
maxi)
The Cambox does not reply 1) Push the RESET button thanks to a clip (page4)
Impossible to enable the wifi of the camera
1) Low battery (wifi antenna unavailable) 2) Check the procedure (page 9)
Impossible to connect to the camera wifi with my phone
1) Check that the yellow led of the camera is well blinking (see page 9)
2) Scan networks via your smartphone in order to find the network called " Cambox Isi3"
3) Enter the password and be sure the Cambox yellow led remains solid (peering successful)
I am not sure that the Cambox is fully charged
1) Respect the charging instructions (2H of charging)
2) Launch the application on your smartphone to control the battery level (page 17)
The Cambox automatically turns off randomly
1) The Cambox switch to safety mode in the case of excessive temperature (lower than -5° & more than +55° C)
2) Check that the Cambox is well fastened to its support and that no element is in contact with the buttons on the front of it
3) Check that no one is connected to you camera via WIFI
INSTRUCTIONS TO RESPECT
Safety & warnings Use: Respect terms of uses and follow applicable regulations and laws including private life protection laws, that can ban the use of the camera in specific areas. This product should not be used for any illegal purposes. The user is fully responsible for its uses. Be careful when using your Cambox as part of your sports activities. Pay attention to what is going on around you to avoid hurting you or hurting someone. Make sure not to drill, bolt or generally speaking to transform your helmet, this in order to ensure your safety level. Respect all the applicable laws when using your Cambox, its fasteners and accessories.
Recycling : Please contact the competent local authority for recycling to have more information about this product. Do not dispose with household waste.
Battery : Do not attempt to remove the battery (note: battery recycling must be in accordance with local environment regulations, see “ Recycling” above.) If the recording function has not been used for some time, make sure to fully charge the camera before using it. File security: This product is not a professional storage device. It does not guarantee the integrity and security of saved files.
� 20
CAMBOX FEATURES
Dimensions (mm) 163mm (W) x 16.5mm (h) x 25,5mm (d)
Weight 47 g
Video resolution 1920 x 1080P @30 FPS1208 x 720P @60 FPS
Video format and ratio MP4 16/9
Audio system AAC2 stereo encode/decode
Interface Micro USB 2.0 HS – Mac & PC
Storage MicroSD memory card (Class 10). From 2 GB to 64GB
Power supply and charger 3,7V high capacity – Lithium Polymer battery, rechargeable. Charger : 5V 480mAh
Battery life Without wifi 1h20. With wifi 1h10
Temperature Operating: -5°C to 55°CStopped: -20°C to 55°C
� 21