Upload
others
View
137
Download
8
Embed Size (px)
Citation preview
Find out more about PEO TV GoCall us on 1 2 1 2 or visit www.peotv.com
Postal address : SLT VisionCom (Pvt) Ltd,
Sri Lanka Telecom, P. O. Box 503, Lotus Road,
Colombo 1, Sri Lanka.
Tel | 1 2 1 2
Web | www.peotv.com
Email | [email protected]
Like us on Facebook | https://www.facebook.com/PEOTV
Self Care | https://selfcare.peotv.com
Useful Information
Default PIN : 1234
USER GUIDE
Your PEO TV Go Remote Controller Unit (RCU)
Program the functionalities of the Power button of the TV RCU to the Learning Key of the STB RCU.
1. Press the” Power and Mute” buttons together and hold for 3 seconds, the indicator light will be a long light and will proceed into the learning state;
2. Press the button and the indicator light will turn long light to flashing light which is in a state of learning receive;
3. Aim the two remotes at a similar level in a straight line, keeping them 1-3 cm apart and press the power button of the TV’s RCU. The indicator light will then flash three times and transition into a long light indicating that the learning process is complete.
4. Once you complete the learning process, press the “OK” button on the STB RCU to save and exit the learning.
Note : You must maintain stability between the two RCUs and avoid any movements during the learning process.
Connecting Your Set Top Box (STB)
FunctionRCU Button
Switch the STB ON or turn the device into standby Mode
Disable /Enable Sound
Standby on/off
Mute Button
Move through menu items, select and confirm options
Rewind/Play/Pause/Fast Forward
Go back from the current screen
Open the menu
Back Button
Menu Button
V+/-
Numeric Buttons
Video Play Buttons
Arrow Buttons/OK
Change Volume
Enter numbers
OK
Synchronizing with TV Remote
Show Electronic Programe Guide
Learning Key
Guide Button
Home Tab is displayedHome
Red/Green/Yellow Button
Blue Button
Functionality not assigned
Search Content
1
Connecting Your Set Top Box (STB)
3
OTT STB Initial Setup
3. Select and connect to the preferred Wi-Fi connection by providing the relevant password.
4
1. Once the STB is powered up, below Welcome screen will appear. Press OK to Continue.
OTT STB Initial Setup
2. Press OK button to setup Wi-Fi. 4. The initial set up is then complete. Click OK button to launch PEO TV Go App.
6
ON ANY DEVICEEVERYWHERE YOU GO
MULTIPLE USERS ANY DEVICE EVERYWHERE
During Lightning, it is advised to unplug all equipment from the AC mains supply for better protection.
6. The PEO TV Go App will then launch successfully.
OTT STB Initial Setup
5. Once the PEO TV Go App is launched, enter the Validation Code obtained at the registration process. (Note: The Validation Code will be sent via E-mail and SMS or can be obtained over the self-care portal. Visit https://selfcare.peotv.com for self-care portal).