User guide for TF6000PVR ES · Title: User guide for TF6000PVR ES Author: Topfield Created Date: 4/1/2008 2:29:42 PM

TOPFIELD

TF 6000 PVR ESUser Guide

Digital Satellite Receiver

Personal Video Recorder

The lighting flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated “dangerous voltage” within theproduct’s enclosure that may be of sufficient magnitudeto consititute a risk of electric shock to a person.

The exclamation point, within an equilateral triangle, isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the product.

iv Contents

Contents

Contents iv

1 Introduction 11.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.2 Controlling the digital receiver . . . . . . . . . . . . . . . . . . 2

1.2.1 The front panel . . . . . . . . . . . . . . . . . . . . . . . 31.2.2 The remote control . . . . . . . . . . . . . . . . . . . . . 4

1.3 What is common interface? . . . . . . . . . . . . . . . . . . . . 7

2 Setup 82.1 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.2 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . 82.3 Rear panel connections . . . . . . . . . . . . . . . . . . . . . . . 102.4 Connecting up your digital receiver . . . . . . . . . . . . . . . 11

2.4.1 Connecting the antenna . . . . . . . . . . . . . . . . . . 122.4.2 Connecting to your television set . . . . . . . . . . . . 132.4.3 Connecting to your video cassette recorder . . . . . . . 16

2.5 Switching on for the first time . . . . . . . . . . . . . . . . . . . 162.5.1 Inserting batteries in the remote control . . . . . . . . . 162.5.2 Powering on and checking picture . . . . . . . . . . . . 17

3 Preference Settings 183.1 Language settings . . . . . . . . . . . . . . . . . . . . . . . . . . 183.2 Video and audio settings . . . . . . . . . . . . . . . . . . . . . . 20

3.2.1 Television standard . . . . . . . . . . . . . . . . . . . . 20

Contents v

3.2.2 Colour model . . . . . . . . . . . . . . . . . . . . . . . . 203.2.3 Video cassette recorder . . . . . . . . . . . . . . . . . . 213.2.4 Television aspect ratio . . . . . . . . . . . . . . . . . . . 213.2.5 High definition television . . . . . . . . . . . . . . . . . 223.2.6 Video scaling . . . . . . . . . . . . . . . . . . . . . . . . 233.2.7 Audio mode . . . . . . . . . . . . . . . . . . . . . . . . 23

3.3 Local time setting . . . . . . . . . . . . . . . . . . . . . . . . . . 233.4 Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . 243.5 Adjusting the on-screen display . . . . . . . . . . . . . . . . . . 273.6 To turn on the time shift feature . . . . . . . . . . . . . . . . . . 273.7 To use MediaHighway programme guide . . . . . . . . . . . . 27

4 Service Search 294.1 Searching broadcasting services . . . . . . . . . . . . . . . . . . 29

4.1.1 Configuring LNB settings . . . . . . . . . . . . . . . . . 294.1.2 Configuring DiSEqC 1.2 settings . . . . . . . . . . . . . 324.1.3 Configuring USALS settings . . . . . . . . . . . . . . . 334.1.4 Searching services . . . . . . . . . . . . . . . . . . . . . 35

4.2 Copying services . . . . . . . . . . . . . . . . . . . . . . . . . . 374.3 Resetting to factory settings . . . . . . . . . . . . . . . . . . . . 38

5 Daily Usage 395.1 Volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . 395.2 Watching television . . . . . . . . . . . . . . . . . . . . . . . . . 39

5.2.1 The services list . . . . . . . . . . . . . . . . . . . . . . . 395.2.2 The favourite services list . . . . . . . . . . . . . . . . . 425.2.3 Viewing programme information . . . . . . . . . . . . 435.2.4 Selecting audio tracks . . . . . . . . . . . . . . . . . . . 445.2.5 Selecting subtitle tracks . . . . . . . . . . . . . . . . . . 445.2.6 Viewing teletext . . . . . . . . . . . . . . . . . . . . . . 44

5.3 Viewing electronic programme guide . . . . . . . . . . . . . . 455.4 Watching multifeed programme . . . . . . . . . . . . . . . . . 465.5 Using time shift . . . . . . . . . . . . . . . . . . . . . . . . . . . 465.6 Using picture in picture . . . . . . . . . . . . . . . . . . . . . . 48

6 Listing Services 49

vi Contents

6.1 Editing the services list . . . . . . . . . . . . . . . . . . . . . . . 496.2 Editing the favourite list . . . . . . . . . . . . . . . . . . . . . . 516.3 How to use on-screen keyboard . . . . . . . . . . . . . . . . . . 536.4 Transferring receiver data . . . . . . . . . . . . . . . . . . . . . 536.5 Editing channel data on your computer . . . . . . . . . . . . . 54

6.5.1 Editing satellite and transponder list . . . . . . . . . . 566.5.2 Editing television and radio services list . . . . . . . . 586.5.3 Editing favourite list . . . . . . . . . . . . . . . . . . . . 59

7 Recording and Playing 617.1 Recording a programme . . . . . . . . . . . . . . . . . . . . . . 62

7.1.1 Instant recording . . . . . . . . . . . . . . . . . . . . . . 627.1.2 Timer recording . . . . . . . . . . . . . . . . . . . . . . 647.1.3 Scheduling recordings using the programme guide . . 677.1.4 Recording a time-shifted programme . . . . . . . . . . 687.1.5 Recording a pay service programme . . . . . . . . . . . 68

7.2 File archive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 697.2.1 To delete a recording . . . . . . . . . . . . . . . . . . . . 697.2.2 To sort recordings . . . . . . . . . . . . . . . . . . . . . 697.2.3 To lock a recording . . . . . . . . . . . . . . . . . . . . . 707.2.4 To rename a recording . . . . . . . . . . . . . . . . . . . 707.2.5 To make a new folder . . . . . . . . . . . . . . . . . . . 707.2.6 To move a recording to another folder . . . . . . . . . . 71

7.3 Playing back a recording . . . . . . . . . . . . . . . . . . . . . . 717.3.1 To navigate using the progress bar . . . . . . . . . . . . 727.3.2 To play in slow motion . . . . . . . . . . . . . . . . . . 727.3.3 To play in fast motion . . . . . . . . . . . . . . . . . . . 727.3.4 To make a bookmark . . . . . . . . . . . . . . . . . . . . 737.3.5 To play back a recording repeatedly . . . . . . . . . . . 737.3.6 To play back recordings in sequence . . . . . . . . . . . 747.3.7 To play back a scrambled recording . . . . . . . . . . . 74

7.4 Editing a recording . . . . . . . . . . . . . . . . . . . . . . . . . 757.5 Copying a recording . . . . . . . . . . . . . . . . . . . . . . . . 757.6 MP3 playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 767.7 Transferring recording files . . . . . . . . . . . . . . . . . . . . 767.8 Formatting the hard disk . . . . . . . . . . . . . . . . . . . . . . 78

Contents vii

8 Accessing to The Digital Receiver via The Internet 798.1 Configuring the router . . . . . . . . . . . . . . . . . . . . . . . 80

8.1.1 To access within the local area network . . . . . . . . . 808.1.2 To access on the level of the Internet . . . . . . . . . . . 81

8.2 Configuring the network settings on the digital receiver . . . . 838.3 Accessing the web server . . . . . . . . . . . . . . . . . . . . . 848.4 Accessing the FTP server . . . . . . . . . . . . . . . . . . . . . . 86

9 Topfield Application Program 88

10 Firmware Update 9010.1 Checking the firmware information . . . . . . . . . . . . . . . 9010.2 From your computer via USB port . . . . . . . . . . . . . . . . 9210.3 From your computer via RS-232 port . . . . . . . . . . . . . . . 9310.4 From another digital receiver via RS-232 port . . . . . . . . . . 9410.5 Over the air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Index 96

1

Chapter 1

Introduction

The TF 6000 PVR ES digital receiver is fully compliant with theinternational Digital Video Broadcasting (DVB) standard, andthus is able to receive digital broadcasts of that standard. Forits operation you need an antenna, which must be installedappropriately.

NOTE

In general we equate a channel with a frequency. Unlike ana-logue broadcasts, however, digital broadcasts are not all as-signed to their own frequencies; instead, multiple televisionbroadcasts are transmitted through a single frequency. The fre-quency in digital broadcasting is usually called transponder. Toreduce confusion in this manual, the word service is preferablyused than channel as a term to indicate one television or radiobroadcast.

1.1 Features

The TF 6000 PVR ES digital receiver has the following features:

• Supports DiSEqC 1.0, DiSEqC 1.1, DiSEqC 1.2 and US-ALS.

2 Introduction

• Can store up to 5000 television and radio services.

• You can edit the services list.

• You can create favourite lists of your favourite services.

• You can view information about the current television orradio programme.

• Has an electronic programme guide that provides anoverview of scheduled programmes.

• You can record one service while you are currently watch-ing another.

• The large storage capacity of the hard disk drive allowsyou to record up to about 60 hours of television —in caseof 250 gigabytes— in excellent picture and sound quality.

• Time shift is a special technical feature available on theTF 6000 PVR ES. You can pause the programme you arewatching and resume it again at a later time. Thenyou can quickly go to whatever part of the current pro-gramme by fast foward or backward search.

1.2 Controlling the digital receiver

You can operate the digital receiver with the remote controland the buttons on the front panel.

NOTE

When the digital receiver is off but plugged into a wall outlet,we say that it is in standby mode; on the other hand, when it ison, it is in operation mode. Even when you are not using thedigital receiver, you should keep it plugged into a wall outletto be in standby mode so that it can run timer events at anytime.

1.2 Controlling the digital receiver 3

1.2.1 The front panel

The front panel of the digital receiver has buttons to control thedigital receiver, and specific lamps and a display to indicate itsstatus. The following indicates what they mean.

button switches the digital receiver between standbymode and operation mode.

Front display displays the current time in standby mode,and displays the current service in operation mode.

MENU button displays the main menu. It is also used toreturn to the previous menu from a submenu.

OK button displays the services list. See § 5.2.1 for moredetails. It is also used to select a menu item.

CHANNELc,a buttons switch to previous or next service.They are also used to navigate in menus and interactivescreens.

VOLUMEb,d buttons decrease or increase the volume.They are also used to change values for menu options.

Pull the right edge of the front panel to open the flap. You haveto insert your subscription card into the front slot to watch payservices.

4 Introduction

1.2.2 The remote control

1

2

3 3

4

5

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

2526

27 28

29

30 31

32

33

34

35

36

37

1© button switches the digital receiverbetween standby mode and operationmode.

2© is used to set a sleep timer in 10minute increments.

3© b,d buttons decrease or increase thevolume. They are also used to changevalues for menu options.

4© mutes the sound. Press again toswitch it back on.

5© c, a buttons switch to previous ornext service. They are also used tonavigate in menus and interactivescreens.

6© switches between the current ser-vice and the previously viewed one.

7© Numeric buttons are used to enter aservice number for service change orto specify values for menu options.

8©�� OK displays the services list. See§ 5.2.1 for more details. It is also usedto select a menu item.

9©�� FAV displays the favourite lists.

10© displays the service informationbox. It is also used to display moreinformation about a programme.

11© is used to select an audio track and a sound mode, ora video track of multifeed programme.

1.2 Controlling the digital receiver 5

12© is used to select a subtitle track.

13© displays teletext.

14©�� V.Format changes video resolution. See § 3.2.5 for moredetails.

15©�� A/R changes aspect ratio. See § 3.2.4 for more details.

16© switches between television services and radio ser-vices.

17©�� GUIDE displays the electronic programme guide.

18©�� AUX switches the output of the TV SCART socket be-tween the digital receiver and the device connected tothe VCR SCART socket. See § 3.2.3 for more details.

19©�� SAT displays the satellites list with their services list. It isalso used to swap the sub-picture with the main picture.See § 5.6 for more details.

20©�� MENU displays the main menu. It is also used to returnto the previous menu from a submenu.

21©�� EXIT is used to exit the current screen.

22© is used to start recording.

23© is used to stop playback, to stop recording, or to jumpback to live television from time-shifted television.

24© is used to display the list of recorded programmesthat are stored on the internal hard disk drive. See § 7.2for more details.

25© resumes normal playback speed, or displays theprogress bar for navigation on playback or time shift.To play a recorded programme, see button 24.

26© pauses live television or playback of a recorded pro-gramme.

6 Introduction

27© is used to start reverse playback. Subsequent pressesincrease the rewind speed.

28© is used to start fast motion playback. Subsequentpresses increase the playback speed.

29© is used to start slow motion playback. Subsequentpresses change the playback speed.

30© changes the position of sub-picture counterclockwise.It is also used to jump back to beginnng of recordingduring a playback.

31© changes the position of sub-picture clockwise. It isalso used to jump to end of recording during a playback.

32©�� F1 is used to display, minify or hide the sub-picture. See§ 5.6 for information about picture-in-picture.

33©�� F2 is used to make a bookmark during playback or timeshift.

34©�� F3 is used to jump to next bookmark position or to jumpforward 30 seconds.

35©�� F4 is used to jump back 20 seconds for an instant replay.It is also used to edit a recording.

36© displays the services list for sub-picture. It is also usedto specify a block for editing or for repeated playback.

37©�� M is not used in this model.

The�� F1 ,

�� F2 ,�� F3 ,

�� F4 and buttons have additional differentfunctions per menu besides their own function. They will beguided by on-screen help.

1.3 What is common interface? 7

1.3 What is common interface?

Some broadcasts are scrambled so that only paidsubscribers can enjoy them. Scrambled servicescan only be viewed with a Conditional AccessModule (CAM) and a subscription card belong-ing with the scrambling system.

Common Interface (CI) is the slot on a digitialreceiver into which a conditional access modulemay be insterted. The front of the digital receiverhas two common interfaces.

To watch a pay service, you should take the following steps:

1. Purchase a conditional access module and a subscriptioncard for the pay service you want to watch.

2. Insert the subscription card into the conditional accessmodule.

3. Insert the conditional access module into a common in-terface on the front of the digital receiver.

To view the information aboutthe module and subscriptioncard which is inserted into thedigital receiver, select the In-formation > Common Interfacemenu. You should see a screenlike the left figure.

8 Setup

Chapter 2

Setup

2.1 Unpacking

Before going any further, check that you have received thefollowing items with your digital receiver.

• Remote control unit• Two batteries for the remote control (AAA 1.5 V)• A copy of this user guide

NOTE

Accessories may vary according to your local area.

2.2 Safety precautions

Please read carefully the following safety precautions.

• The mains power must be 90 to 250 volts. Check it beforeconnecting the digital receiver to the mains socket . Forthe power consumption of the digital receiver, refer toTable 2.1.

2.2 Safety precautions 9

• The mains socket should be near the equipment. Do notrun an extension lead to the unit.

• Do not expose the digital receiver to any moisture. Thedigital receiver is designed for use indoors only. Use drycloth when cleaning the digital receiver.

• Place the digital receiver on a firm and level surface.

• Do not place the digital receiver close to heat emittingunits or in direct sunlight, as this will impair cooling.Do not lay any objects such as magazines on the digi-tal receiver. When placed in a cabinet, make sure thereis a minimum space of 10 centimetres around it. Forthe physical specification of the digital receiver, refer toTable 2.2.

• Protect the power cord from being walked on or pinched.If the cord is damaged, do not use the digital receiverand get the cord replaced.

• Never open the digital receiver casing under any circum-stances, or the warranty will be void.

• Refer all servicing to a qualified service technician.

Table 2.1: Power specifications

Input voltage 90 to 250 V AC, 50/60 HzPower consumption 45 W at maximum in operation

8 W in standby

Table 2.2: Physical specifications

Size 380× 60× 265 mmWeight 4.3 kgOperating temperature 0 to 45 °CStorage relative humidity 5 to 90 %

10 Setup

2.3 Rear panel connections

The TF 6000 PVR ES has a wide range of connections on theback.

USBLAN

LNB 1 IN

LNB 1 OUT LNB 2 OUTAUDIO

VIDEO

S-VIDEO

LNB 2 INL

R

TV

VCR RS-232

S/PDIF

1

2

3

4

5

6 8

9

10 11 1412 13

HDMI

7

Check what connections your television set has in comparisonwith the digital receiver.

1© LNB 1 IN Satellite broadcasting signal input socket forthe first tuner.

2© LNB 1 OUT Satellite broadcasting signal output socketthrough the first tuner.

3© LNB 2 IN Satellite broadcasting signal input socket forthe second tuner.

4© LNB 2 OUT Satellite broadcasting signal output socketthrough the second tuner.

5© VIDEO Composite video output socket for the televi-sion set. (yellow)

6© AUDIO L/R Stereo audio output socket for the televisionset or the audio system. (white/red)

7© S/PDIF Dolby digital output socket for the audio sys-tem.

8© S-VIDEO Super video output socket for the televisionset.

2.4 Connecting up your digital receiver 11

9© TV Audio and video output socket for the televi-sion set.

10© VCR Audio and video input/output socket for thevideo cassette recorder or suchlike.

11© LAN Local area network port. See Chapter 8.

12© HDMI Audio and video output socket for the highdefinition television set.

13© USB USB port for firmware update and data trans-fer.

14© RS-232 Serial port for firmware update and datatransfer.

Table 2.3: Connectors specifications

VIDEO Composite video (CVBS) outputAUDIO Left & right audio outputS-VIDEO Super video (S-Video) outputRGB Component video (RGB) outputTV CVBS/S-Video/RGB/YUV video output

Left & right audio outputVCR CVBS video output

Left & right audio outputCVBS/S-Video/RGB/YUV video input for bypassLeft & right audio input for bypass

HDMI High definition video outputLeft & right audio outputDolby digital audio output

S/PDIF Dolby digital audio outputRS-232 115.2 kbps at maximumUSB 2.0

2.4 Connecting up your digital receiver

There are several ways to set up the digital receiver. Set up thedigital receiver suitably to your television and other appliances.

12 Setup

If you have any problem with your setup or need help, contactyour dealer.

2.4.1 Connecting the antenna

Whatever sort of connection you have be-tween the digital receiver and the television,you need to connect the digital receiver toyour television antenna so that it can receivedigital television services.

Connect the antenna cable to the LNB 1 INconnector on the back panel of the digitalreceiver.

Also, you must ensure that there is a con-nection to both the LNB 1 IN and LNB 2 INconnectors on your digital receiver, so thatboth tuners work properly.

Normally you do that by using a loop cable to link from theLNB 1 OUT connector to the LNB 2 IN connector.

If you have two antennas without DiSEqC switch, then youhave to connect a cable from the other antenna directly to theLNB 2 IN connector rather than using the loop cable. If youhave another digital receiver, you may link it from the LNB 2OUT connector.

NOTE

The digital receiver can supply a current of 500 milliampere atmaximum for antenna devices including LNB, DiSEqc switchand antenna rotor through each antenna input connection sep-arately but not simultaneously. If there are too many antennadevices to be supplied with power through antenna input con-nections simultaneously for a long time, your LNBs may lackpower to operate. So it is recommended to link the LNB 1 OUTconnector to the LNB 2 IN connector with a loop cable even


though the digital receiver is designed to operate over twoantennas alternatively.

NOTE

Perhaps you are expecting that the satellite antenna could si-multaneouly catch all frequencies coming from a satellite andsend them to the digital receiver. However, the satellite an-tenna only sends the frequencies that it can catch with the LNBfrequency and polarisation specified by the digital receiver. Soif you have linked from the LNB 1 OUT connector to the LNB 2IN connector, you would have some limitations in using somefeatures such as dual recording. Likewise, if you have anotherdigital receiver linked from the LNB 2 OUT connector, you canonly use it limitedly. See § 4.1 for more details.

2.4.2 Connecting to your television set

Between all the following connectors of the digital receiver, werecommend you to use the first connector to get best picturequality. If your television does not have the matching connector,then use the next connector in the following order for betterpicture quality.

1. HDMI connector (HDMI)

2. SCART connector (TV)

3. S-Video connector (S-VIDEO)

4. Composite connector (VIDEO)

You should configure audio and video settings after connectingup the digital receiver. See § 3.2 for detailed description.

14 Setup

To use the HDMI connector

If you have a high definition television set,you should use a HDMI cable for best re-sults. Plug one end of the cable into the HDMIsocket on the digital receiver, and plug theother end into the matching socket on yourtelevision. In this case, you do not have tomake audio connection because the HDMIconnector can output stereo audio or Dolbydigital audio.

To use the SCART connector

For best results with a standard television set,you should use a SCART cable. Plug one endof the cable into the TV socket on the digitalreceiver, and plug the other end into a freeSCART socket on your television.

Some televisions have inputs via S-Video orComponent connectors rather than SCART.

If you have such a television, use an appropriate conversion ca-ble to link the TV socket on the digital receiver to the matchingsocket on your television.

If you connect with a standard SCART cable, you do not haveto make audio connection because the SCART connector canoutput stereo audio. But if you use a conversion cable, such asSCART-to-Component, you have to make audio connection.

NOTE

You cannot view high definition video with the SCART connec-tor.


To use the S-Video connector

NOTE

You cannot view high definition video withthe S-Video connector.

You need to obtain a S-Video cable to usethe S-Video connector. Plug one end of thecable into the S-VIDEO socket on the digi-tal receiver, and plug the other end into thematching socket on your television.

To use the composite video connector

NOTE

You cannot view high definition video withthe composite video connector.

You need to obtain a composite video cable(RCA cable) to use the composite video con-nector. Plug one end of the cable into theVIDEO (yellow) socket on the digital receiver,and plug the other end into the matchingsocket on your television.

To make the audio connection

You need to obtain an audio cable (RCA ca-ble) to connect the audio connectors. Plugone end of the cable into the AUDIO L (white)and AUDIO R (red) sockets on the digital re-ceiver, and plug the other end into the match-ing sockets on your television or audio sys-tem.

16 Setup

To enjoy Dolby digital audio, your televi-sion or audio system must be able to decodeDolby digital audio, and you need to obtain aS/PDIF cable. Plug one end of the cable intothe S/PDIF socket on the digital receiver, andplug the other end into the matching socketon your audio system.

2.4.3 Connecting to your video cassette recorder

The digital receiver can also output video to another appliancesuch as a video cassette recorder through an auxiliary SCARTconnector.

You need to obtain a SCART cable to use theauxiliary SCART connector. Plug one end ofthe cable into the VCR socket on the digital re-ceiver, and plug the other end into the match-ing socket on your video cassette recorder orsuchlike.

2.5 Switching on for the first time

Now that you have your digital receiver connected, you shouldplug it into a mains socket. Ensure that your television set isturned on, so that you will be able to see the display from thedigital receiver.

2.5.1 Inserting batteries in the remote control

To insert the batteries, open the battery compartment by remov-ing the lid, and then insert the batteries observing the polarity,which is marked on the base of the battery compartment.

If the digital receiver no longer reacts properly to remote con-trol commands, the batteries may be flat. Be sure to remove

2.5 Switching on for the first time 17

used batteries. The manufacturer accepts no liability for thedamage resulting from leaking batteries.

NOTE

Batteries, including those which contain no heavy metals, maynot be disposed of with household waste. Please dispose ofused batteries in an environmentally sound manner. Find outabout the legal regulations which apply in your area.

2.5.2 Powering on and checking picture

Now, press the button in top left corner on the remote con-trol. If you do not see a picture, check that the television is setto the correct input. If the picture is good, you can skip to§ 4.1 to search for the available television and radio services.Otherwise, you may need to temporarily connect the compos-ite video connector (VIDEO) to your television set so that youcan see the on-screen menus in order to configure the videosettings.

18 Preference Settings

Chapter 3

Preference Settings

3.1 Language settings

You can select the language inwhich the menu would be dis-played. In addition to that, youcan select which language of au-dio track and of subtitle trackshould be output.

Select the System Setting > Lan-guage Setting menu. You shouldsee a screen like the left figure.

Menu language

The digital receiver supports many menu languages: Dutch,English, German, French, Italian, Russian, Turkish and so forth.Set the Menu Language option to your desired language. Onceyou select a language, the menu will be immediately displayedin the selected language.

3.1 Language settings 19

Subtitle language

Set the 1st Subtitle Language option and the 2nd Subtitle Lan-guage option to your desired languages. When you watch aprogramme, if the programme has a subtitle track of the lan-guage that is designated for the 1st Subtitle Language, it will bedisplayed. If the first language is not available but the secondlanguage is available, the subtitle of the second language willbe displayed. If there is not any available language, no subtitlewill be displayed.

Apart from this setting, you can select a subtitle track with thebutton. See § 5.2.5 for detailed description.

Audio language

Set the 1st Audio Language option and the 2nd Audio Lan-guage option to your desired languages. When you watch aprogramme, if the programme has an audio track of the lan-guage that is designated for the 1st Audio Language, it willbe output. If the first language is not available but the secondlanguage is available, the audio of the second language will beoutput.

Apart from this setting, you can select an audio track with thebutton. See § 5.2.4 for detailed description.


3.2 Video and audio settings

You have to configure the videoand audio settings appropriatelyto your television set and otherappliances.

Select the System Setting >

A/V Output Setting menu. Youshould see a screen like the leftfigure.

3.2.1 Television standard

The digital receiver supports two television standards. Oneis PAL standard, and the other is NTSC standard. PAL wasadopted in European countries while NTSC is adopted in USA,Canada, Mexico and so forth.

If you have a PAL television, you have to set the TV Type optionto PAL. In that case, if you switch to a service of the NTSCstandard, though it is unlikely to happen, the digital receiverwill present the pictures converting into the PAL standard.However, it is inevitable to lose a little picture quality. Likewise,the contrary case brings about the same result.

The best thing is to watch PAL services with a PAL televisionand to watch NTSC services with a NTSC television. However,a multi television set is able to process both of them. So ifyou have a multi television set, you had better set the TV Typeoption to Multi. Then the digital receiver will present pictureswithout standard conversion.

3.2.2 Colour model

Through the TV SCART connector, the digital receiver is ableto output video in various colour models. If you have the

3.2 Video and audio settings 21

digital receiver linked to your television via this connector, youshould set the SCART Output option to your desired colourmodel. If you have connected via the RCA connector labeledVIDEO on the back panel, you do not have to set this optionbecause the digital receiver outputs CVBS video through theRCA connector independent of the SCART connector.

However, if you have connected via the S-VIDEO connector,you have to set this option to S-Video because the outputthrough S-Video connector comes from the SCART interface.

It is known in general that the RGB colour model provides thebest video quality with little difference from the YUV colourmodel but the CVBS colour model does the least. So RGBwould be most desirable for this option.

3.2.3 Video cassette recorder

You can have the digital receiver linked to your video cassetterecorder or such an appliance via the VCR SCART connector. Inthat case, the digital receiver will operate differently dependingon the setting of the VCR Scart Type option. If the option isset to Standard, the digital receiver will pass the video fromthe video cassette recorder to your television when it startsplayback. But if the option is set to External A/V, the digitalreceiver will not pass the video automatically. To pass it, youhave to press the

�� AUX button.

NOTE

It is impossible for the digital receiver to record the video thatthe video recorder plays back because the digital receiver isjust a bypass for the video recorder.

3.2.4 Television aspect ratio

If you have a wide-screen television, set the TV Aspect Ratiooption to 16:9.


Otherwise, if you have a normal-screen television, set the TVAspect Ratio option to 4:3.

You cannot fully enjoy wide-screen programmes with yournormal-screen television as the above figures show. The leftfigure shows a normal picture displayed in the normal screen.To watch wide-screen programmes in the shape like the centrefigure, set the 16:9 Display Format option to Letter Box. Wide-screen pictures then will be reduced to fit to the width of thenormal screen. Otherwise, to watch them in the shape like theright figure, set it to Center extract. Wide-screen pictures thenwill be cut out on the left and right sides equally to fit to thewidth of the normal screen.

3.2.5 High definition television

The digital receiver supports various video resolutions from576 to 1080. In general a resolution of 720 or more is consideredhigh definition. The higher the resolution is, the better qualityyou can enjoy. However, if your television set does not sup-port high definition, you cannot enjoy high definition qualitypicture.

Set the HDMI Output option as you desire. The available valuesfor this option are changed according to the TV Type option.If you set this option to 576P, the digital receiver will presenteven high definition programmes in resolution of 576. On thecontrary, if you set it to 1080I, the digital receiver will presenteven standard definition programmes in resolution of 1080.

3.3 Local time setting 23

NOTE

You can enjoy only standard definition video with the followingconnectors:

• Composite video connector (VIDEO)• S-Video connector (S-VIDEO)• SCART connector (TV)

3.2.6 Video scaling

By adjusting the Video Output Scaling option, you can inflateor shrink pictures from −20 to +20 percent so that they couldfit tight to the frame of your television without black space.

3.2.7 Audio mode

Basically, there are two audio sources as you can find two audiosockets on the back panel of the digital receiver. You can enjoyonly one source or both of them in either stereo or mono. Setthe Sound Mode option as you desire.

Apart from this setting, you can change the sound mode withthe button. See § 5.2.4 for detailed description.

3.3 Local time setting

You should set your local time for timer events. If you do notset the local time right, the programme time table provided bythe programme guide may be distrustful. For the programmeguide, refer to § 5.3.


Select the System Setting > TimeSetting menu. You should see ascreen like the left figure.

You can set the clock manuallyor use the time signal, Green-wich Mean Time (GMT), carriedas part of the digital televisionbroadcast.

To use Greenwich Mean Time,take the following steps:

1. Set the Mode option to Auto; then the Time Offset optionbecomes enabled.

2. Set the Time Offset option to the time difference betweenyour time zone and GMT referring to Table 3.1.

3. Make sure that your local time is correctly displayed onthe Local Time option.

To set the local time yourself, set the Mode option to Manual andenter your local time to the Local Time option with the numericbuttons. The time format is day/month/year 24-hour:minute.

If daylight saving time is observed in your state at the moment,set the Daylight Saving Time option to On.

NOTE

Daylight saving time adds one hour to the time when the op-tion is set to On. When setting the time offset from GreenwichMean Time, make sure that time offset does not include day-light saving time.

3.4 Parental control

In general, television programmes are classified according tothe level of violence, nudity and language of their content.

3.4 Parental control 25

Table 3.1: Time offset table

Time offset City

GMT − 12:00 Eniwetok, KwajaleinGMT − 11:00 Midway Island, SamoaGMT − 10:00 HawaiiGMT − 09:00 AlaskaGMT − 08:00 Pacific Time US, CanadaGMT − 07:00 Mountain Time US, CanadaGMT − 06:00 Central Time US, Canada, Mexico CityGMT − 05:00 Eastern Time US, Canada, Bogota, LimaGMT − 04:00 Atlantic Time Canada, La PazGMT − 03:30 NewfoundlandGMT − 03:00 Brazil, Georgetown, Buenos AriesGMT − 02:00 Mid-AtlanticGMT − 01:00 Azores, Cape Verde IslandsGMT London, Lisbon, CasablancaGMT + 1:00 Paris, Brussels, Copenhagen, MadridGMT + 2:00 South Africa, KaliningradGMT + 3:00 Baghdad, Riyadh, Moscow, St. PetersburgGMT + 3:30 TehranGMT + 4:00 Abu Dhabi, Muscat, Baku, TbilisiGMT + 4:30 KabulGMT + 5:00 Ekaterinburg, Islamabad, Karachi, TashkentGMT + 5:30 Bombay, Calcutta, Madras, New DelhiGMT + 6:00 Almaty, Dhaka, ColomboGMT + 7:00 Bangkok, Hanoi, JakartaGMT + 8:00 Beijing, Perth, Singapore, Hong KongGMT + 9:00 Tokyo, Seoul, Osaka, Sapporo, YakutskGMT + 9:30 Adelaide, DarwinGMT + 10:00 Eastern Australia, Guam, VladivostokGMT + 11:00 Magadan, Solomon Islands, New CaledoniaGMT + 12:00 Fiji, Auckland, Wellington, Kamchatka

When you are watching a programme, you can check its pro-gramme classification on the information box. For the informa-tion box, see § 5.2.3.

You can prevent your children from watching specific pro-grammes by specifying a programme classification.


Select the System Setting >

Parental Control menu. Youshould see a screen like theleft figure, and you will beasked your Personal Identifica-tion Number (PIN). The numberis initially set to ‘0000’.

If you wish to block 15 or above rated programmes, set theCensorship option to 15 (age). Setting it to No block blocks noprogramme; on the other hand, setting it to Total block blocksevery programme.

NOTE

If a programme does not have any programme classificationinformation, your censorship setting will not take effect.

If anyone is trying to watch a programme that is of or abovethe censorship setting, the person has to enter the personalidentification number to override.

To change the number, select the Change PIN Code menu; thenan input box appears. You have to enter a desired numbertwice for confirmation.

You can also restrict uses of some menus. Selecting the AccessControl menu displays a list of menus that you can lock. If theTime Setting item is set to Locked, you have to enter the per-sonal identification number when accessing the Time Settingmenu. If you enter a wrong number, you cannot use the menu.To release a shut item, set it to Unlocked.

3.5 Adjusting the on-screen display 27

3.5 Adjusting the on-screen display

You can adjust the transparency level of the on-screen display.Select the System Setting menu and set the OSD Transparencyoption as you desire. Its available range is 0 to 50 percent.

You can adjust the display time of the information box. For theinformation box, see § 5.2.3. To adjust its display time, selectthe System Setting menu and set the Info Box Display Timeoption as you desire. Its available range is 1 to 30 seconds. Ifyou set this option to No Info Box, the information box will notbe displayed when you switch services. However, pressingthe button will display the information box. If you setthis option to Never Hide, the information box will always bedisplayed.

In addition, you can raise or lower the position of the informa-tion box. Select the System Setting menu and set the Info BoxPosition option as you desire. Its available range is −10 to +3lines. The higher you set the option, the lower the informationbox will be positioned.

3.6 To turn on the time shift feature

Time shift means that the most recent hour of the television ser-vice you are watching gets saved temporarily on the hard diskof the digital receiver. When this feature is enabled, you canreverse and pause live television as if playing back a recording.To enable this feature, select the System Setting menu and thenset the Time Shifting option to Enable. See § 5.5 for how to usethis feature.

3.7 To use MediaHighway programme guide

Almost every service provider would provide the electronicprogramme guide. However, you can get more abundantprogramme information from the specific transponder thatprovides only programme guides. For detailed description


about the electronic programme guide, see § 5.3. MediaHigh-way stands for the transponder dedicated to the electronicprogramme guide.

If you want to use this feature,select the System Setting > Me-diaHighway EPG menu. Youshould see a screen like the leftfigure.

Set the MediaHighway EPG option to On to activate this feature;then the other options become enabled. Set the Satellite Nameand Home Transponder options to available ones, and set theTuner Select option to a tuner through which to receive them.

29

Chapter 4

Service Search

After connecting up the digital receiver, you will need to per-form a service search.

4.1 Searching broadcasting services

This digital receiver can be operated with both fixed antennaand motorized antenna. You have to configure antenna settingsaccording to your antenna system in the following order:

1. Configure LNB settings. (Refer to § 4.1.1.)

2. Set the position of your desired satellites if you havea motorized antenna. You can control the antenna inDiSEqC 1.2 mode or USALS mode. Refer DiSEqC 1.2 to§ 4.1.2, and refer USALS to § 4.1.3.

3. Perform service search.

4.1.1 Configuring LNB settings

There are in large two frequency bands for satellite broadcasts.One is C band which ranges approximately from 4 to 6 GHz.

30 Service Search

The other is Ku band which ranges approximately from 12 to18 GHz.

The LNB (Low Noise Block converter)is used to take a wide band of relativelyhigh frequencies, amplify and convertthem to similar signals that is carriedat a much lower frequency, which iscalled Intermediate Frequency (IF).

High frequencies from satellites areconverted into 950 to 2150 MHz by aLNB.

Select the Installation > LNB Set-ting menu to configure the LNBsettings. You should see ascreen like the left figure.

Pressing the�� OK button on the Satellite Name option displays

the satellite list in alphabetic order. Select the satellite towardwhich your antenna is set to face.

You have to specify which tuner is connected to your selectedsatellite. If it is LNB 1 IN, set the Tuner Select option to Tuner1; otherwise, set it to Tuner 2.

If you have connected the LNB 1 OUT and LNB 2 IN with aloop-through cable, then set the Connection Type option toLoop Through; otherwise, set it to Separated.

4.1 Searching broadcasting services 31

NOTE

Both the LNB 1 IN and LNB 2 IN sockets should be connectedto your antennas either directly or via the loop-through cable.If you have connected only one socket, some features such asdual recording will not function.

The digital receiver has a database about broadcasting satellitesand their transponders, containing the following information:satellite position, frequency range, symbol rate, polarizationand LNB frequency corresponding to the frequency range. Soyou might not have to specify the LNB Frequency option. How-ever, if you have selected the Other entry at the Satellite Nameoption to specify a satellite that is not in the satellite list, youmight have to fill in the correct LNB frequency. The absolutedifference between a broadcasting frequency and its LNB fre-quency must be within 950 to 2150 MHz. For example, if thefrequency band of your desired satellite ranges from 3660 to4118 MHz, you have to set the LNB Frequency option to 5150MHz.

The LNB has to be supplied with electric power to operate. Setthe LNB Power option to On if it does not have any other powersupply.

You had better ignore the 22 kHz option.

The digital receiver is designed to be compatible with DiSEqC(Digital Satellite Equipment Control) switches. It is possibleto connect several antennas to one digital receiver by DiSEqCswitches. A DiSEqC 1.0 switch allows switching between up tofour satellite sources and a DiSEqc 1.1 switch allows switchingbetween up to 16 satellite sources.

Set the DiSEqC 1.0 option and the DiSEqC 1.1 option accord-ing to your antenna configuration.

32 Service Search

For example, to select the antenna con-nected to the A5 input in the left figure,set the DiSEqC 1.1 option to 2 of 4 andthe DiSEqC 1.0 option to 1 of 4. If youhave a mini DiSEqC 1.0 switch whichhas only two inputs, you should set theDiSEqC 1.0 option to Mini A instead of1 of 4.

4.1.2 Configuring DiSEqC 1.2 settings

Your motorized antenna will turn toward your desired satelliteshorizontally by DiSEqC 1.2.

When you switch to an service, if the service isprovided by a satellite other than current one,it will take longer time than usual because theantenna has to turn to its position.

To use the DiSEqC 1.2 protocol,select the Installation > Motor-ized DiSEqC 1.2 menu. Youshould see a screen like the leftfigure.

At first you have to set the Mo-torized DiSEqC 1.2 option to En-able.

To get the correct position of your desired satellite, perform thefollowing steps:


1. Choose your desired satellite at the Satellite Name op-tion.

2. Select the tuner that is connected to the motorized an-tenna at the Tuner Select option.

3. Set the DiSEqC Command Mode option to User.

4. Set the Motor Control option to Goto. Then the antennawill turn toward your selected satellite by the positiondata that the digital receiver has.

5. If the receiving quality, which is displayed at the bottomright of the screen, is not good, tune the antenna finelywith the Movement option. If you set it to 2(E), the an-tenna will move to the east by two degrees. At this timeyou had better check the receiving quality of every trans-ponder and choose the best one at the Transponder (orFrequency) option. It will be helpful to your fine tuning.

6. Finally set the Motor Control option to Store to save thetuned position when the receiving quality is best.

There are more motor control options for installers, but thisguide does not describe them. If you are an installer, refer themto the manual about the STAB rotor.

4.1.3 Configuring USALS settings

USALS (Universal Satellite Automatic Location System), alsoknown as DiSEqC 1.3, calculates the positions of all availablesatellites from your location. Compared to DiSEqC 1.2, it is nolonger required to manually search and store every satelliteposition. Just pointing to a known satellite position is enough.This position will act as a central point. The USALS will thencalculate positions of visible satellites.

34 Service Search

To use the USALS protocol, se-lect the Installation > USALSSetting menu. You should seea screen like the left figure.

At first you have to set the Mo-torized DiSEqC 1.3 option to En-able.

To get every satellite position calculated, perform the followingsteps:


2. Select the tuner that is connected to the motorized an-tenna at the Tuner Select option.

3. Enter your location to the My Longitude option and theMy Latitude option with theb,d and numeric buttons.

4. Enter the position of your selected satellite to the SatelliteAngle option if it is not correct.

5. Select the Goto the position option; then the antennawill turn toward your selected satellite as calculating itsposition.

6. If the receiving quality, which is displayed at the bottomright of the screen, is not good, then tune the antennafinely with the Move option. The changed position isautomatically saved. At this time you had better checkthe receiving quality of every transponder and choosethe best one at the Transponder (or Frequency) option. Itwill be helpful to your fine tuning.


4.1.4 Searching services

To perform service search, selectthe Installation > Service Searchmenu. You should see a screenlike the left figure.

There are four service search methods:

• Searching every service of a satellite.

• Searching every service of a transponder.

• Searching one service of a transponder.

• Searching every service of a SMATV (Satellite MasterAntenna Television) system.

Searching every service of a satellite

To search every service of a satellite, perform the followingsteps:


2. Set the Search Mode option to Auto.

3. If you set the Network Search option to On, the digitalreceiver will check up the up-to-date channel informationas searching services, but it takes rather longer time.

Searching every service of a transponder

To search every service of a transponder, perform the followingsteps:

36 Service Search


2. Set the Search Mode option to Manual.

3. Choose your desired transponder at the Frequency op-tion or enter it with the numeric buttons.

4. Enter the symbol rate of your desired transponder to theSymbol Rate option with the numeric buttons.

5. Set the Polarization option to the polarization of yourdesired transponder.

6. If you set the Network Search option to On, the digitalreceiver will check up the up-to-date channel informationas searching services, but it takes rather longer time.

NOTE

You may get transponder information from a satellite magazineor web site such as http://www.satcodx.com or http://www.lyngsat.com.

Searching one service of a transponder

To search one service of a transponder, perform the followingsteps:


2. Set the Search Mode option to Advanced.



5. Set the Polarization option to the polarization of yourdesired transponder.

6. Specify the packet identifiers of your desired service atthe PID option with the numeric buttons. A packet iden-tifier is used to verify audio and video streams.

http://www.satcodx.com

http://www.lyngsat.com

http://www.lyngsat.com

4.2 Copying services 37

Searching every service of SMATV system

To search every service of a SMATV system, if the digital re-ceiver is connected to it, perform the following steps:


2. Set the Search Mode option to SMATV.



You can search pay services as well as free services as follows:

• To search only free services, set the FTA/Scrambled optionto FTA only.

• To search only pay services, set it to CAS only.

• To search both free services and pay services, set it to FTA+ CAS.

To start service search, select the Start Search item; then a listbox appears, in which found services will be listed. When ithas completed, press the

�� OK button to save found services.To stop at any time or to exit without saving, press the

�� EXIT

button.

4.2 Copying services

The digital receiver maintains a separate services list with eachtuner. If a certain service is registered on only one tuner, itmay be impossible to watch one service while recording. Youcan copy entries of one tuner’s services list to the other tuner’sservices list to avoid such inconvenience.

To copy service entries, select the Installation > Services Copymenu. There are three copy options. To copy service entries

38 Service Search

of the first tuner to the second tuner’s services list, select theTuner 1 to Tuner 2 option. To copy on the contrary, select theTuner 2 to Tuner 1 option. To copy reciprocally, select the ALLoption.

4.3 Resetting to factory settings

The digital receiver maintains the following data:

• Satellite list• Services list• Favourite list• Timer list• Preference settings

You can reset all data of the digital receiver. To do that, selectthe Installation > Factory Setting menu, and then you get askedfor confirmation. If you select Yes, service entries, favouriteentries and timer events will all be deleted, and preferenceoptions will be reset to the manufacturer’s factory settings.

NOTE

A factory reset will not delete any recorded programmes.

39

Chapter 5

Daily Usage

5.1 Volume control

Use theb andd buttons to alter the volume to a comfortablelevel. You may need to adjust the volume on your television settoo. To temporarily switch off the sound, press the button.Press it again to restore the sound to previous level.

5.2 Watching television

To change services, press thea orc button. Pressing thebutton switches to the previously viewed service. In addition,you can switch to your desired service by entering its servicenumber with the numeric buttons. You can also select a serviceto watch in the services list.

5.2.1 The services list

To view the services list, press the�� OK button.

40 Daily Usage

On the services list, you can seethe service information:

• Service number and name• Transmitting satellite• Receiving tuner: T1 stands for

the first tuner; T2 stands forthe second tuner.

• Transponder information

A dollar sign ($) may be marked on some entries, indicatingpay service. To watch pay services, you need the subscriptioncard.

To select a desired service, put the highlight bar on its entrywith thea orc button and press the

�� OK button; then it will bepresented. Pressing theb ord button skips over 10 entries upor down. Entering a service number with the numeric buttonsputs the highlight bar on its entry.

You can switch between the television services list and theradio services list by pressing the button.

Pressing the�� F3 button performs an alphabetic browse. For

instance, when the highlight bar is on an entry of which initialis B, pressing the

�� F3 button puts the highlight bar on the firstentry of which initial is C.

To sort the services list by service name, press the�� F2 but-

ton. Pressing this button once more makes it sorted by servicenumber.

Pressing the�� F4 button displays the additional options, with

which you can do the following:

• Select your desired satellite at the Satellite option, thenonly services provided by the selected satellite will belisted.

5.2 Watching television 41

• Select your desired tuner at the Tuner option, then onlyservices provided through the selected tuner will belisted.

• By setting the Show Provider option to On, you can viewservice entries by groups of broadcasters.

• To change the name of the highlighted service, select theRename option; then the on-screen keyboard appears,with which you can enter a new name. See § 6.3 for howto use the on-screen keyboard.

• You can prevent other family members from watching thehighlighted service by setting the Lock option to Locked.You have to enter your personal identification number towatch or unlock it.

• To delete the highlighted service, select the Delete option;then you get asked for confirmation. If you select Yes, itwill be deleted. If you want to restore it as before, youhave to perform service search again. See § 4.1 for servicesearch.

• To add the highlighted service into a favourite group,select the Add to Fav option; then the favourite groupswill be displayed. Put the highlight bar on a desiredgroup and press the

�� OK button.

• You can additionally sort the services list with the Sortingoption as follows:

Default by service number

Alphabetic by service name

Satellite by satellite

FTA–CAS from free services to pay services

CAS–FTA from pay services to free services

Provider by broadcaster

Fav–NoFav from favourite services to unfavourite ser-vices.

42 Daily Usage

Pressing the�� SAT button displays the satellite list. Once you

select a desired satellite, only services provided by the selectedsatellite are listed.

5.2.2 The favourite services list

You can select a service to watch on a favourite list as well ason the services list.

To display the favourite lists,press the

�� FAV button. Youshould see a screen like the leftfigure. As you move the high-light bar up or down on thefavourite group list at the leftbox, favourite services belong-ing to the highlighted group arelisted on the right box.

For how to edit the favourite lists, refer to § 6.2.

To select a favourite service, put the hightlight bar on a desiredgroup and press thed button; a highlight bar appears on itsfavourite services list. Once you select a desired service withthe

�� OK button, it will be presented. Otherwise, to select othergroup, press theb button.

After you have selected a favourite service, if you then switchto another service using the a or c button, it will be alsoanother favourite service of the selected group. The digitalreceiver will remind you what group you have selected bydisplaying its name at the top right of the screen whenever youswitch services. If you wish to get out of the current group,select the All services group on the favourite group list.

Besides that, you can add or delete a favourite group or service.To add the service you are currently watching into a favouritegroup, put the highlight bar on a desired group and press the

5.2 Watching television 43

�� F3 button. To create a new group, press the�� F2 button; then

the on-screen keyboard appears. Enter your desired name andsave it. See § 6.3 for how to use the on-screen keyboard. Todelete a group or a service, press the button; then you getasked for confirmation. If you select Yes, it will be deleted.

5.2.3 Viewing programme information

Pressing the button displays the information box, on whichyou can see all of the following:

• Service number and name• Transmitting satellite• Receiving tuner• Transponder information• Signal level and quality• Programme name• Programme classification symbol• Programme summary• Broadcasting time• Current time

In addition, you might see the following symbols:

• Subtitle symbol ( ) if subtitle tracks are provided on thecurrent programme.

• Teletext symbol ( ) if teletext pages are provided on thecurrent service.

• Dolby symbol ( ) if a Dolby audio track is provided onthe current programme.

• Lock symbol ( ) if the current service is locked.

• Dollar symbol ($) if the current service is a pay service.

• Multifeed symbol ( ) if the current programme is pro-vided as a multifeed programme. To use this feature,refer to § 5.4.

When you are not using time shift, if the electronic programmeguide is provided on the current service, you can see the infor-

44 Daily Usage

mation about the current and next programmes with theb or

d button. To adjust the sound volume in this case, hold downthe b or d button until the sound bar appears and reachesyour desired level.

Pressing the button once more displays detailed informa-tion about the current programme. To hide the informationbox, press the

�� EXIT button.

5.2.4 Selecting audio tracks

Some programmes are provided with audio tacks in one ormore languages. Pressing the button displays availableaudio tracks. Once you select an audio track, it will be sounded.In addition, you can enjoy audio tracks in four sound modes:Stereo, Mono, Left or Right. However, if a multifeed pro-gramme is provided at the moment, video tracks will be dis-played. In this case, you have to press the button oncemore to select an audio track.

5.2.5 Selecting subtitle tracks

Some programmes are provided with subtitle tracks in one ormore languages. If the current programme provides subtitletracks, the subtitle symbol ( ) will be marked on the informa-tion box. Pressing the button displays available subtitletracks. Once you select a subtitle track, it will be displayed.

5.2.6 Viewing teletext

On some services, such information as weather reports, newsor stock quotations is provided by means of teletext. If thecurrent service provides teletext, the teletext symbol ( ) willbe displayed on the information box. Press the button toview teletext pages.

Select a page to view by entering its page number with the nu-meric buttons. You can zoom into a teletext page with the

�� F3

5.3 Viewing electronic programme guide 45

button, and adjust its transparency level with the�� F4 button.

To clear the teletext screen, press the�� EXIT button.

5.3 Viewing electronic programme guide

The Electronic Programme Guide shows the current and sched-uled programmes that are or will be available on each servicewith a short summary for each programme.

Pressing the�� GUIDE button dis-

plays the electronic programmeguide, on which you can see thefollowing:

• Scheduled programmes• programme summary• Broadcasting date• Broadcasting time

To see detailed information of a desired programme, put thehighlight bar on your choice with thea orc button and pressthe button. To switch to another service, press theb ordbutton. You can travel over previous days with the

�� F2 button,and can travel over next days with the

�� F3 button.

To see the programme guide for radio broadcasts, press thebutton. To switch it back, press the button again.

Pressing the�� F1 button displays the programme guide in the

form of spreadsheet. To switch it back, press the�� F1 button

again.

You can make a timer recording on the electronic programmeguide. See § 7.1.3 for detailed description.

46 Daily Usage

5.4 Watching multifeed programme

Some broadcasts such as sports channels can provide a varietyof perspectives on a programme at a same time. We call it amultifeed programme. You can select and watch a perspectiveyou prefer.

If a multifeed programme is provided on the current service,the multifeed symbol ( ) will be marked on the informationbox. Press the button, then available video tracks will belisted. Once you select one, it will be presented. At this time,you have to press the button once more to select audiotracks.

5.5 Using time shift

You can pause and resume a live television programme, andeven rewind and replay it. When you are watching a pro-gramme and you miss something, you can rewind and replayit. Or when your attention is needed elsewhere, you can pauseit and resume it a short time later without losing any of it.

When you do this, you are nolonger watching the live pro-gramme, instead you are watch-ing a delayed presentation of it.This is called time shifted tele-vision. Then, you can skip com-mercials until you catch up to thelive broadcast.

In order to use the time shiftfeature, the Time Shifting optionmust be set to Enable. See § 3.6.

When enabled, the digital receiver will keep as much as onehour recording buffer of current service by utilizing the harddisk drive storage. The buffer will reset each time you changeto another service.

5.5 Using time shift 47

With time shift enabled, the following operations are possible:

• To go back in time, hold down the button; to go for-ward, hold down the button. The progress bar isdisplayed momentarily with a preview window.

• You can navigate using the progress bar, refer to § 7.3.1.

• You can jump forward 30 seconds at a time by pressingthe

�� F3 button.

• You can jump backward 20 seconds at a time by pressingthe

�� F4 button.

• You can change playback speed. For slow motion see§ 7.3.2. For fast motion see § 7.3.3.

• To check your current position in time shift, press thebutton. The time difference compared to live pro-

gramme is displayed momentarily in top right corner ofscreen. A value of −02:00 means two minutes behindlive programme.

• To make a recording of what is in time shift, see § 7.1.4.

• To end time shift, press the button. The live pro-gramme will be presented.

When time shift option is disabled and pause is kept for morethan 10 seconds, the time shift feature will be switched on tostop you loosing part of the programme. In such case it willremain enabled until you change services.

48 Daily Usage

5.6 Using picture in picture

You can watch two servicesat the same time with one ofthem presented in a sub-picture.We call this feature picture-in-picture.

The instructions on how to usethe picture-in-picture feature areas follows:

1. Press the�� F1 button to display a sub-picture, on which

another service will be presented.

2. Pressing the�� F1 button once more minifies the sub-

picture, and pressing it once again hides the sub-picture.

3. To display the services list for the sub-picture, press thebutton.

NOTEWhen a recording is in progress, the available services inthe services list may be limited.

4. Pressing the button moves the sub-picture counter-clockwise, and pressing the button moves it clock-wise.

5. Pressing the�� SAT button swaps the main picture with the

sub-picture. Even when you play back a recording, youcan watch a live programme in the sub-picture. However,you cannot swap the pictures in that case.

6. If both pictures are pay services, only the main-picturewill be presented.

49

Chapter 6

Listing Services

6.1 Editing the services list

You would have got the services list after service search. Youcan rename, move, lock or delete service entries on the serviceslist.

Select the Organizing Svc/Fav >

Organizing Services menu. Youshould see a screen like the leftfigure.

There are editing options on theleft column and service entrieson the right column.

Once you put the highlight bar on a desired option on theleft column and press the

�� OK button, you can select a desiredservice to edit on the right column. To go over to the othercolumn, press the

�� F1 button.

50 Listing Services

To edit the radio services list, press the button; then radioservice entries will be listed on the right column. To switchback to the television services list, press it again.

To change the name of a service, select the Rename and select adesired service; then the on-screen keyboard appears. See § 6.3for how to use the on-screen keyboard.

Unlike analogue broadcasts, each service does not have aproper service number in digital broadcasts. Service num-bers are just assigned to services in the order that they werefound in service search. So you can reassign a service num-ber by moving a service entry. To move a service entry, selectthe Move option and select a desired service; then the selectedservice becomes darker. As you move it up or down, it getsrenumbered according to the position. Press the

�� OK button tofix it.

You can lock some services to prevent your children fromwatching them. To lock a service, select the Lock option andselect a desired service; then the selected service gets markedwith a lock symbol ( ) on it. If anyone tries to watch a lockedservice, the person has to enter the personal identification num-ber that is set to the Change PIN Code option. See § 3.4 for thisoption. Pressing the

�� OK button on a locked service entry turnsit back to be unlocked.

To delete a service, select the Delete option and select a desiredservice with the

�� OK button, and then press the�� EXIT button;

you get asked for confirmation. If you select Yes, the selectedservice will be deleted. If you want to undo the deleted service,there is nothing you can do but perform a service search again.

Once you select the Sort option on the left column, sortingoptions are displayed as follows:

Default by service number

Alphabetic by service name

Satellite by satellite

FTA–CAS from free services to pay services

6.2 Editing the favourite list 51

CAS–FTA from pay services to free services

Provider by broadcaster

Fav–NoFav from favourite services to unfavourite services.

Transponder by transponder

6.2 Editing the favourite list

You can make your own favourite services list. In fact, you candefine multiple favourite services lists, each being a ‘group’ ofchosen services.

Select the Organizing Svc/Fav >

Organizing Favorites menu. Youshould see a screen like the leftfigure.

There are three columns:

• Group list (left)• Favourite list (centre)• Services list (right)

The services list contains all available services, whereas thefavourite list contains only chosen services that have beenadded to the highlighted group. As you move the highlightbar up or down on the group list, favourite services belongingto the highlighted group get shown in the favourite list.

You can add up to 30 groups. To add a group, select the NEWoption in the group list; then the on-screen keyboard appears.See § 6.3 for how to use the on-screen keyboard.

To rename a group, put the highlight bar on the group entry youwant and press the

�� F2 button; then the on-screen keyboardappears. See § 6.3 for how to use the on-screen keyboard.

52 Listing Services

To delete a group, put the highlight bar on the group entry youwant and press the

�� F3 button; then a message box appearsasking you for confirmation. If you select Yes, it will be deleted.

You can add a favourite service to a group by taking the follow-ing steps:

1. Put the highlight bar on a desired group entry in thegroup list and press the

�� OK button to select it. The high-light bar then moves to the services list.

2. To add a service to the selected group, put the highlightbar on a desired service entry and press the

�� OK button.The selected service entry gets added to the favourite list.Repeat this step to add more entries.

3. Press the�� F1 button and the highlight bar gets moved to

the favourite list. You can delete a favourite entry withthe

�� OK button.

4. To select another group, press the�� F1 button again. By

pressing the�� F1 button, the highlight bar gets moved to

each column.

To add radio services, press the button; then radio serviceentries get listed in the services list. To recall the televisionservices list after adding radio services, press the buttonagain.

With your favourite services list, you can select your favouriteservices more easily. Refer to § 5.2.2 for detailed description.

6.3 How to use on-screen keyboard 53

6.3 How to use on-screen keyboard

You can move the highlight keyhorizontally with theb anddbuttons and vertically with the

a andc buttons. Pressing the�� OK button on a key enters its let-ter in the input line. To type aspace, select the Space key. Totype lower case letters or numer-als, select the Other key.

To delete a letter, put the cursor to the right of the desired letteron the input line and then select the Del key. You must selectthe Save key to complete naming; otherwise if you press the�� EXIT button, it will not be named.

6.4 Transferring receiver data

The digital receiver retains the following data:

• Satellite and transponder data• Services list• Favourite lists• Preference settings

It is possible to transfer the receiver data from the digital re-ceiver to another same digital receiver by connecting them witha RS-232 cable. To have the receiver data transferred, performthe following steps:

54 Listing Services

1. Plug one end of a RS-232 cable (9 pin D-sub cable) into the RS-232 port on the dig-ital receiver, and the other end into thematching port on the other digital receiver.

2. Turn on the source digital receiver.

3. Select the Installation > Transfer Firmware> Transfer Data to Other IRD menu, thenyou get asked for confirmation; select Yes.

4. To start the data transfer, turn on the targetdigital receiver.

5. A progress bar appears showing theprogress of the data transfer.

6. Restart the target digital receiver when thedata transfer is complete.

6.5 Editing channel data on your computer

You can edit the channel data on your computer by using achannel editor programme, Vega. With Vega you can do thefollowing:

• Adding, deleting or modifying satellite entries

• Adding, deleting or modifying transponder entries

• Deleting or modifying service entries

• Adding, deleting or modifying favourite groups

You can not only transfer your channel data to the digitalreceiver but also save it as a file, the extension name ofwhich is std. Vega is available from the Topfield web site,http://www.i-topfield.com.

To use Vega, you have to prepare either a USB cable or a RS-232cable to link the digital receiver with your computer.

http://www.i-topfield.com

6.5 Editing channel data on your computer 55

If you have a RS-232 cable (9 pin D-sub cable),plug one end of the cable into the RS-232port on the digital receiver, and the other endinto the matching port on your computer.

If you have a USB cable, plug one end of thecable into the USB port on the digital receiver,and the other end into the matching port onyour computer.

Turn off the digital receiver if it is on, and then Run Vega. Toimport the channel data from the digital receier, perform thefollowing steps:

1. If you have connected with a USB cable, select the Mode> USB menu; otherwise if you have connected with aRS-232 cable, select the Mode > Serial menu.

2. Select the Up & Down > Upload from STB menu.

3. A box appears asking for your confirmation. Press theUpload button on it.

4. Turn on the digital receiver. Data transfer will start assoon as it is turned on.

Of course, you can open a std file instead of importing the chan-nel data from the digital receiver if you have one. When youhave finished your work, you have to perform the followingsteps to export the channel data to the digital receiver.

1. Select the Up & Down > Download to STB menu.

56 Listing Services

2. A box appears asking for your confirmation. Press theDownload button on it.

3. Turn on the digital receiver. Data transfer will start assoon as it is turned on.

6.5.1 Editing satellite and transponder list

To edit the satellite list, first select the View > Satellite Informa-tion menu item. Alternatively you can click the Satellite iconon the toolbar or press the F1 key on your keyboard. Then thesatellite information is displayed and related menus becomeenabled.

To add a satellite entry, select the Function > Satellite, TP >

Add Satellite menu, then a box appears. You should enter anew satellite name into the Satellite Name field. If you knowthe position index of the new satellite for DiSEqC 1.2, enter the


value into the Position Index field. If you do not, you have toperform the Motorized DiSEqC 1.2 menu of the digital receiver.Refer that menu to § 4.1.2. After making a new satellite entryby pressing the OK button on the box, you should configureLNB settings for it. Refer LNB settings to § 4.1.1.

To delete a satellite entry, choose your desired satellite entry atthe Satellite drop-down list box, and then select the Function >

Satellite, TP > Delete Satellite menu item. Then a box appearsasking for your confirmation, the selected satellite entry willbe deleted by pressing the Yes button on it.

To modify a satellite entry, choose your desired satellite entryat the Satellite drop-down list box, and then select the Function> Satellite, TP > Edit Satellite menu item. How to modify isthe same as in adding a new satellite entry.

To add a transponder entry, select the Function > Satellite,TP > Add Transponder menu item. Then a box appears, inwhich you should specify frequency, symbol rate, polarity andstream identification for your new transponder. Pressing theOK button will save a new transponder entry.

To delete a tansponder entry, choose your desired transponderentry at the TP List list box, and then select the Function >

Satellite, TP > Delete Transponder menu item. Then a boxappears asking for your confirmation, the selected transponderentry will be deleted by pressing the Yes button on it.

To modify a transponder entry, choose your desired trans-ponder entry at the TP List list box, and then select the Function> Satellite, TP > Edit Transponder menu item. How to modifyis the same as in adding a new transponder entry.

58 Listing Services

6.5.2 Editing television and radio services list

To edit the television services list, first select the View > TV Ser-vice menu item. Then the television services list is displayedand related menus become enabled.

To delete a service entry, choose your desired service entry atthe TV Service list, and press the Delete key on your keyboard.When a confirmation dialog box appears, the selected serviceentry will be deleted by pressing the Yes button on it.

Checking the CAS check box designates a selected service entryas a pay service. If there is a service that you want to preventyour children from watching, select it and check the Lock checkbox.

To edit the radio services list, first select the View > RadioService menu item. How to edit is the same as in editing thetelevision services list.


6.5.3 Editing favourite list

To edit the favourite list, first select the View > Favorite Groupmenu item. Then the favourite group list is displayed andrelated menus become enabled.

To delete a favourite group, choose your desired favouritegroup at the Favorite Group Name drop-down list box, andthen select the Function > Fav Group > Delete Current FavGroup menu item. When a confirmation dialog box appears,the selected favourite group will be deleted by pressing the Yesbutton on it.

60 Listing Services

To add a favourite group,select the Function > FavGroup > Add New FavGroup menu item. Then youwill see a dialog box likethe left figure. Enter yourdesired name into the Fa-vorite Group Name text boxto name a new group. Ifyou make a radio favouritegroup, select the Radio op-tion button.

To add services to the new group, choose your desired servicesat the All Service list box on the left of the screen, and thenpress the right arrow button (→) on the centre of the screen.Then the selected services will be added to the new group. Toremove a service entry from the group, press the left arrowbutton (←) after choosing one. Pressing the OK button willcreate your new favourite group.

To modify a favourite group, select the Function > Fav Group> Edit Current Fav Group menu item. How to modify is thesame as in adding a favourite group.

61

Chapter 7

Recording and Playing

You can record two different services while watching another iftwo of the services are provided through the same transponder.The TF 6000 PVR ES digital receiver has two tuners so that youcan enjoy the following:

• While playing a recording back, you can watch a servicein the sub-picture using the picture-in-picture feature.

• You can record two different services while playing backa previously recorded programme.

• You can record two different services while watching oneof them using the time shift feature. See § 5.5 for the timeshift feature.

• You can even record two different services while watch-ing two other different services—only if two or moreservices are provided in a same transponder and theother services are provided in another same transponder.In this case you can watch two services at the same timeusing the picture-in-picture feature. See § 5.6 for thepicture-in-picture feature.

62 Recording and Playing

7.1 Recording a programme

Once recording has started, a symbol like the left fig-ure will be displayed at the top right of the screen fora few seconds. When you are watching a service dif-

ferent from the service being recorded, you can view a numberon the centre of the symbol, which indicates the order that therecording is started.

To record two programs simultaneously, two tuners are allo-cated for the recording. Therefore, you can only change to alimited number of services while the two programs are beingrecorded.

CAUTION

Do not move the digital receiver nor pull out the plug whileit is running. It may cause damage to recorded programmes.Note that Topfield is not responsible for damages inflictedon files that are stored on the hard disk drive.

NOTE

If a recording lasts less than one minute, the digital recieverwill not save the recording.

7.1.1 Instant recording

To instantly record the programme you are watching at present,press the button.

Pressing the button will not pause the current recordinglike it does with a video cassette recorder. Instead, pressingthe button will pause the live show and begin time shiftingwithin the current recording even with the Time Shifting optiondisabled. However, it is still possible to pause a recording.

7.1 Recording a programme 63

After a recording is started,pressing the button displaysa menu like the left figure, inwhich you can set the recordingduration.

To specify an arbitrary recording duration, set the Durationoption as you desire with theb andd buttons and press the�� OK button; the recording will end at the specified time.

If the information about the next programme is provided bythe electronic programme guide, the After this program andAfter next program options will be available. Once the Afterthis program option is selected, the current recording will stopwhen the current programme is scheduled to end. Likewise,once the After next program option is selected, the currentrecording will stop when the next programme is scheduled toend.

Selecting the Record pause option pauses recording. When youpress the button again, you will see this option is changedto Record continue. To resume recording, select it.


To stop recording, press thebutton; then a box like

the left figure appears, whichshows programmes currently be-ing recorded. If you select one,its recording will stop.

While a recording is going on, you can watch or record anotherservice. To additionally record another service, switch to theservice you want to record, and press the button.

Once a recording is started, it is put on the recorded programmelist even though it is not finished yet. The recording file isnamed after its service name with a suffix of a number. Toview the recorded programme list, press the button or alter-natively select the File List menu.

See § 7.2 for detailed description about the recorded pro-gramme list.

7.1.2 Timer recording

You can set a service to be recorded at a specific time. Evenif the digital receiver is in standby mode, it will switch intooperation mode and start recording at a specified time. Whenthe recording comes to the end, the digital receiver will switchback into standby mode again in one minute. However, ifyou press any button on the remote control or on the frontpanel even just one time, the digital receiver will not switchinto standby mode.


To input a timer recording, selectthe Timer Setting menu; then thetimer list will be displayed.

To add a new timer event, pressthe

�� F1 button, and a box likethe left figure appears. Take thefollowing steps:

1. Set the Record option to On to make a recording. If thisoption is set to Off, the digital receiver will turn on at thespecified time but not record; instead, you may recordwith your video cassette recorder or suchlike in this case.

2. If you want a radio programme, set the Type option toRadio; otherwise, set it to TV.

3. Set the Satellite option to the satellite which transmits theservice you want. Pressing the

�� OK button on this optiondisplays a satellite list, from which you can select yourdesired satellite. Set the Tuner Select option to a tuner toreceive your desired service.

4. Set the Service option to the service which provides theprogramme you want. Pressing the

�� OK button on thisoption displays a services list, from which you can selectyour desired service.

5. There are five timer modes:

One Time means literally ‘one time’.

Every Day means literally ‘every day’.

Every Weekend means ‘Saturday and Sunday everyweek’.

Weekly means ‘one day every week’.


Every Weekday means ‘from Monday to Friday everyweek’.

If your favourite programme is broadcast at weekendsand you wish to record every episode of the programme,set the Mode option to Every Weekend.

6. Set the Date option to a desired date, on which the digitalreceiver will turn on. The date format is day/month/year-day of the week.

Set the Start Time option to a desired time, at which therecording will be started. The time format is hour:minute.

7. Set the Duration option to a desired time, in which therecording will be finished.

8. Pressing the�� OK button on the File Name option displays

the on-screen keyboard, with which you can specify afile name for the timer recording. If you do not specifyanything, it will be named after the service name. See§ 6.3 for how to use the on-screen keyboard.

9. To set a timer recording with the above settings, selectthe OK item; otherwise, it will not be saved and will notoccur.

You can also edit or delete timer events in the timer list.

To edit a timer entry, put the highlight bar on the entry youwant and press

�� OK button; then appears a box in which youcan change its settings in the same manner as making a newone.

To delete a timer event, put the highlight bar on the entry youwant to remove and press the

�� F2 button; then you get askedfor confirmation. If you select Yes, it will be deleted.

NOTE

You had better give no operation to the digital receiver while itis working on a timer event. If you press any key on the remote


control or on the front panel, it will not turn off automaticallyeven after the timer event is complete.

7.1.3 Scheduling recordings using the programme guide

If the electronic programmeguide is properly provided, youcan make timer events on it. Theinstructions on how to maketimer recordings using the elec-tronic programme guide are asfollows:

1. Press the�� GUIDE button to display the electronic pro-

gramme guide.

2. Select a service you want to record with the b and dbuttons.

3. Select a programme you want to record with thea and

c buttons.

4. To make a timer event without recording, press the�� OK

button; the letter P is displayed. To make a timer eventwith recording, press it once more or alternatively pressthe button; then the letter R is displayed.

5. This timer event is placed on the timer list. To change itssettings, press the button to show a box in which youcan edit. Refer to § 7.1.2 for detailed description.

6. Pressing the�� OK button once more will cancel the timer.


7.1.4 Recording a time-shifted programme

See § 5.5 for detailed description about the time shift feature.While watching a programme with time shift, you can record itby performing the following steps:

1. Press the button to display the progress bar.

2. To move to the beginning of the desired scene, hold downthe or button until it is reached.

3. Press the button to start recording. The time shiftbuffer from that position onwards will now be recorded.

4. Press the button to stop time shift.

5. Press the button once more to stop recording.

7.1.5 Recording a pay service programme

You can record a pay service programme without the subscrip-tion card. However, you need the subscription card to playit back because it has not been descrambled. So it is recom-mended to record pay service programmes with the subscrip-tion card so that they can be recorded in descrambled form. Inthat case you can enjoy them without the subscription card likefree services.

To record a programme of a pay service in descrambled form,perform the following steps:

1. Select a programme of a pay service you want to record.

2. Make sure that the subscription card is inserted in theslot on the front of the digital receiver.

3. Start recording.

4. Do not switch to other service nor use time shift until itis finished.

7.2 File archive 69

NOTE

If you switch to other service or use time shift in the middleof recording a pay programme, it will be recorded withoutdescrambling from that moment. Even if the recording is onlypartially descrambled, you need the subscription card to playit back.

7.2 File archive

When a programme is recorded, it is stored as a file on thebuilt-in hard disk drive of the digital receiver. You can select arecording to play back from the recorded programme list.

Select the File List menu or alter-natively press the button todisplay the recorded programmelist. The file information is com-prised of the following elements:file number, file name, recordingtime, playing duration, file sizeand so on.

You can play, move, delete, rename and lock a recording file.You can also sort the recording files by file name, playing dura-tion or file size. In addition, you can make a new folder.

7.2.1 To delete a recording

To delete a recording, put the highlight bar on it and press thebutton; then you get asked for confirmation. If you select

Yes, it will be deleted.

7.2.2 To sort recordings

To sort the recordings, perform the following steps:


1. Press the�� F4 button to display the additional options.

2. Set the Sorting option to Alphabetic, Time or Size as youwant.

3. Press the�� EXIT button.

4. They are sorted by the specified option.

7.2.3 To lock a recording

To lock a recording so that other people cannot play it, performthe following steps:

1. Put the highlight bar on a desired recording.


3. Set the Lock option to Locked.

4. Press the�� EXIT button.

5. The lock symbol ( ) is displayed on it.

If you select a locked recording to play it back, you will beasked for your personal identification number.

7.2.4 To rename a recording

To change the name of a recording, perform the following steps:



3. Select the Rename option, and the on-screen keyboardappears. Change the name and save it. See § 6.3 for howto use the on-screen keyboard.

7.2.5 To make a new folder

To make a new folder, press the�� F2 button; then a new folder

named GROUP # is created. You can change its name in thesame manner as renaming a recording. See above.

7.3 Playing back a recording 71

7.2.6 To move a recording to another folder

To move a recording to another folder, put the highlight bar ona desired recording and press the

�� F3 button; then the foldersare listed. Once you choose a folder, the recording is moved toit.

7.3 Playing back a recording

When a programme is recorded, its additional contents such asaudio tracks or teletext are also recorded together. So you canenjoy them while playing back a recording.

The instructions on how to play a recording are as follows:

1. Select the File List menu or alternatively press thebutton to display the list of recorded programmes.


3. Press the�� OK button to start playback.

4. To stop playback, press the button.

During a playback, you can enjoy the following tricks:

• To see the detailed information about the currently playedrecording, press the button; then the information boxappears and shows its file name, playing duration, pro-gramme information, and so on.

• To pause playback, press the button. To resume it,press the button.

• To go forward, hold down the button; to go backward,hold down the button.

• To display the progress bar, press the button; to hideit, press the button again.

• When the progress bar is hidden, you can move to a de-sired scene by entering the percentage with the numericbuttons.


7.3.1 To navigate using the progress bar

First press the button to display the progress bar, then:

• To go forward, hold down the button; to go backward,hold down the button.

• To bookmark a position, refer to § 7.3.4.

• If there are no bookmarks, you can jump forward 30seconds at a time by pressing the

�� F3 button.

• To jump back to beginning of recording, press thebutton.

• To jump to end of recording, press the button.

• To hide the progress bar, press the button again.

7.3.2 To play in slow motion

To watch in slow motion during a playback, press the button.If you press it repeatedly, the playback speed changes in 3 steps:1/2, 1/4 and 1/8 times. To resume normal speed, press thebutton.

7.3.3 To play in fast motion

To watch in fast motion during a playback, press the button.If you press it repeatedly, the playback speed changes in 3 steps:2, 4 and 6 times. To resume normal speed, press the button.

You can play not only forward but also backward in fast mo-tion. To play backward, press the button. If you press itrepeatedly, the playback speed changes in 3 steps: 1, 2 and 3times. To resume normal speed, press the button.

7.3 Playing back a recording 73

7.3.4 To make a bookmark

You can mark favourite partsof a recording by creating book-marks, and then jump to them.You can have up to 64 book-marks. Bookmarks are storedwith the recording so that youcan use them again afterwards.To make bookmarks, performthe following steps during play-back:


2. To add a bookmark, press the�� F2 button at a desired

scene; then you will see a small dot appear above theprogress bar like in the picture above.

3. To jump forward to next bookmark, press the�� F3 button.

4. To jump to first bookmark, press the button then the�� F3 button.

5. To delete a bookmark, jump to it and then press the�� F2

button.

7.3.5 To play back a recording repeatedly

You can play back a recording repeatedly both in whole and inpart.

To play back in whole, press the button when the progressbar is hidden; then the repetition symbol ( ) is displayed onthe information box. To cancel it, press the button again.

To play back in part, perform the following steps:



2. Move to the beginning scene of the part you want to playrepeatedly by holding down the or button.

3. Press the button, then the pointer starts to blink.

4. Move to the end scene; the part is marked in purple.

5. Press the button again, then the part turns green, andrepeated playback starts.

6. To cancel it, press the button when the progress bar isdisplayed.

7.3.6 To play back recordings in sequence

You can play several recordings continuously in sequence byperforming the following steps:

1. Press the button or alternatively select the File Listmenu to display the list of recorded programmes.

2. Select each desired recording with the�� F1 button. once a

recording is selected, it gets numbered.


4. The selected recordings are played in the sequence thatthey are numbered.

5. To jump to start of next selected recording, press thebutton to display the progress bar, then press the

button.

7.3.7 To play back a scrambled recording

If you have recorded a programme of a pay service with thesubscription card, you can play it as freely like one of a freeservice. Otherwise you need the subscription card to playit, because it has been recorded without unscrambling eventhough it may have been partially descrambled.

7.4 Editing a recording 75

On the recorded programme list, a purely green $ indicates therecording has been wholly descrambled; on the other hand, ayellowish green $ indicates it has been partially descrambled,and a purely yellow $ indicates it has not been descrambled atall.

Refer to § 7.1.5 for how to record a pay service programme.

7.4 Editing a recording

You can cut out or save a part such as commercial from arecording by performing the following steps:

1. Press the button to display the progress bar during aplayback.

2. Move to the beginning scene of the part you want to editby holding down the or button.

3. Press the button, then the pointer starts to blink.

4. Move to the end scene; the part is marked in purple.

5. Press the�� F4 button, then the edit options are displayed

6. If you choose the Cut option, it will be removed from theoriginal recording and discarded.

7. If you choose the Save option, the cut will be saved in anew file which is named after the original recording witha suffix of ‘CUT’ and a number.

7.5 Copying a recording

You can copy a recording file in whole or in part during aplayback by performing the following steps:

1. Start playback of a recording you want.

2. Move to a scene from which you want to start copy byholding down the or button.


3. Press the button, then it will be copied in a new filewhich is named after the original recording with a suffixof ‘COPY’ and a number.

4. To stop copy, press the button.

NOTE

You can make a copy of a long recording more quickly bystarting to play the original recording, then pressing buttonuntil the speed has increased to six times, then pressing thebutton. The copy will be done at six times normal speed.

7.6 MP3 playback

You can enjoy music or audio books in MP3 format with thedigital receiver. For how to transfer MP3 files to the digitalreceiver from your computer, refer to § 7.7 or Chapter 8.

To play an MP3 file, perform the following steps:

1. Press the button and then the or button todisplay the MP3 list.

2. Put the highlight bar on a desired file; if you want to playseveral files, select them with the

�� F1 button.


4. To stop playback, press the button.

To play all MP3 files in a subfolder, put the highlight bar on adesired folder, and press the button.

7.7 Transferring recording files

You can transfer files between the digital receiver and yourcomputer via USB connection with Altair, which is a programused to transfer files. You can download it from the Topfieldweb site, http://www.i-topfield.com.


7.7 Transferring recording files 77

To transfer files, take the following steps:

1. Download the Altair programme and theUSB driver from the Topfield web site.

2. Install them on your computer.

3. Plug one end of a USB cable into the USBport on the digital receiver, and the otherend into the matching port on your com-puter.

4. Turn on the digital receiver.

5. Run Altair, then its screen will appear likethe figure below.

The instructions on how to use Altair are as follows:

1. Select files to transfer. The left panel shows files andfolders that are on the digital receiver, while the rightpanel shows files and folders that are on your computer.

2. To transfer files from the digital receiver to your com-puter, press the right arrow button (→).

3. To transfer files from your computer to the digital re-ceiver, press the left arrow button (←).


At the top of the panel, you will see a message that says TurboOff. Turbo mode is a way of speeding up the transfer of files toand from the digital receiver. You can click the circle to the leftof the message to turn turbo mode on or off.

Turbo mode makes transferring files faster, but the digital re-ceiver stops responding to commands from the remote control.If you want to use the digital receiver while transferring, or ifany scheduled recordings are due to start, you should not useturbo mode.

NOTE

You cannot play back the recordings with a regular MPEGplayer on your computer because they are formatted differ-ently from the standard MPEG format.Visit http://www.videolan.org or http://www.elecard.comwhere you can find an MPEG player able to play them back.If you wish to author DVDs with them, visit http://www.

haenlein-software.com where you can find a DVD authoringprogram able to process them.

7.8 Formatting the hard disk

You can delete all contents stored in the hard disk drive byformatting it. If you wish to do that, select the Installation >

Format Hard Disk menu, then you get asked for confirmation.If you select Yes, formatting will start.

CAUTION

Formatting the hard disk will delete all files permanently.

NOTE

If a new hard disk drive is installed, it must be formattedbecause the file system of the digital receiver is different fromany of the personal computer. You can neither record nor usetime shift with an unformatted hard disk.

http://www.videolan.org

http://www.elecard.com

http://www.haenlein-software.com

http://www.haenlein-software.com

79

Chapter 8

Accessing to The Digital

Receiver via The Internet

NOTE

The following section describes complex functions that shouldonly be used by owners with advanced computer knowledge.

TF 6000 PVR ES provides a web service and FTP service. Youcan make scheduled recordings or download recording filesto your computer via these services. Here you need a router,which will connect the digital receiver to your computer or tothe Internet. To use the network features of the digital receiver,you should take the following steps:

1. Configuring your router for the digital receiver.

2. Configuring the Local Area Network (LAN) settings onthe digital receiver.

3. Accessing the home page of the digital receiver. Refer to§ 8.3 for detailed description about things you can do byway of the web service of the digital receiver.

4. Accessing the FTP Server of the digital receiver.

80 Accessing to The Digital Receiver via The Internet

NOTE

The web server and FTP server of the digital receiver don’twork in standby mode. So it must be powered up all the timeif you wish to use the web service at any time.

8.1 Configuring the router

In this section, the setup program of WRT54G, which is a routermanufactured by Linksys, will be referred to as an exemplaryto help your understanding of how to configure the router fornetwork connection.

NOTE

For detailed description about how to set up the router, referto the manual of your router.

8.1.1 To access within the local area network

Once your router is powered up, a local area network getscreated whether or not it is connected to the Internet.

You can let the router automatically as-sign a dynamic IP address to the com-puters or devices connected to the net-work by enabling the DHCP server ofthe router. In this case, you can accessthe digital receiver with the IP addresswhich is assigned to the digital receiverby the router.

If the digital receiver reboots, a new dynamic IP address will beassigned to it. You had better assign a static IP address to thedigital receiver to avoid this inconvenience. For how to assigna static IP address, refer to the manual of your router. For howto specify a static IP address on the digital receiver, see § 8.2.

8.1 Configuring the router 81

8.1.2 To access on the level of the Internet

When you are away from home, you can access the digitalreceiver inside your home if your router is configured to routeaccess to the digital receiver by means of port forwarding. Viathis feature, your router will lead you to the digital receiverwhen you access your router with its IP address.

Your router may be assigned to a dynamic IP address by anInternet service provider. So if the router has rebooted, youcannot access it unless someone in your home can inform youof the changed IP address. However, many routers supportDynamic Domain Name System (DDNS) service, which cansettle this problem.

If you use a DDNS service, you can access your router witha domain name. The instructions on how to use the DDNSservice are as follows:


1. Make an account on a web site providing DDNS service,which should be supported by your router.

2. Configure your router with the account so that it cancommunicate with the web site.

Whenever a new dynamic IP address is assigned to the router,it will inform the DDNS service provider of the new IP address.This makes it possible that you access the router with a domainname at any time.

8.2 Configuring the network settings on the digital receiver 83

8.2 Configuring the network settings on the digital receiver

You should configure the LAN settings to enable the web ser-vice and FTP service.

Select the Installation > LAN Set-ting > IP Configuration menu.

You may get the digital receiver to be assigned a dynamic IPaddress. Set the DHCP option to On to do that. You can viewthe dynamic IP address assigned to the digital receiver by yourrouter at the LAN Status menu.

Sometimes when the digital receiver is restarted, the dynamicIP address will be changed and you will have to check it at theLAN Status menu to access the digital receiver. To avoid thiscumbersome thing, you had better assign a static IP addressrather than dynamic one.

Set the DHCP option to Off, then the IP Address, Subnet Maskand Gateway options become enabled. You have to set theseoptions to match with the configuration of your router.

Set the User ID and Password options as you desire. When youaccess the FTP server, you will be asked for the account thatwas made with these options

NOTE

You can access the FTP server with an anonymous account.However, with an anonymous account you can only downloadfiles. You cannot upload files.


8.3 Accessing the web server

In way of the web server of the digital receiver, you can do thefollowing:

• Download recording files.

• Create new recording timers.

• View information about the programme currently beingrecorded.

• View the system information of the digital receiver.

NOTE

It is recommended to use the Internet Explorer web browser inorder to fully enjoy the above facilities. If you use a differentweb browser such as Netscape Navigator, some problems mayoccur.

To access the digital receiver’s home page through your webbrowser, enter its IP address, or domain name if you use aDDNS service. For the DDNS service, refer to the user manualof your router.

8.3 Accessing the web server 85

You cannot only download but also upload recording files orMP3 files in the File Management page. However, if you wishto download or upload a file of which size is 2 gigabyte ormore, it is recommended to use the FTP server rather than theweb server.

NOTE

The maximum number of user connections is only one. Thismeans that you cannot access the web server while someoneelse is occupying it.


8.4 Accessing the FTP server

You need an FTP client program to access the FTP server of thedigital receiver.

You can log into the FTP server with the user name and pass-word specified in the LAN Setting menu. For how to configurethe LAN settings, refer to § 8.2.

8.4 Accessing the FTP server 87

NOTE

The maximum number of user connections is only one. Thismeans that you cannot access the FTP server while someoneelse is occupying it.

88 Topfield Application Program

Chapter 9

Topfield Application Program

If you are good at programming with C++ language, you canmake an executable program to run on the digital receiver.We call this a Topfield Application program (TAP). In mak-ing a TAP, it is recommended to use Diab compiler of WindRiver, whose web site address is http://www.windriver.com.Some variants of GCC compiler also might be available as acompiler for TAPs. You can get the Application program In-terface (API) libraries for TAPs from the Topfield web site,http://www.i-topfield.com.

Your TAPs will be run under the following conditions:

• Their extension name is tap. If they have any other exten-sion name, they will be ignored.

• They are in the Program Files folder. If they are in otherfolders, they will be ignored.

For how to transfer your program to the digital receiver, referto § 7.7 or Chapter 8.

http://www.windriver.com


89

To run a TAP in the digital receiver, perform the followingsteps:

1. Press the button and then the or button todisplay the program file list.

2. Place the highlight bar on a file entry you want to run.

3. Press the�� OK button to start the program.

4. To exit the program, press the�� EXIT button.

The figure on the left is a run-ning screen of a TAP, ImageViewer, which displays imagefiles of BMP, GIF and JPG for-mat. This TAP is availablefrom the web site, http://www.i-topfield.com.

In the program file list, you can use a variety of file controlfunctions including: renaming, sorting, deleting and so on. Fordetailed descriptions about the file control functions, refer to§ 7.2.

If you want a program to run automatically when the digitalreceiver starts up, move the program to the Auto Start folder.Press the

�� 0 button at start-up if you want the program not torun.



90 Firmware Update

Chapter 10

Firmware Update

The digital receiver has a stable and convenient firmwareto use. However, once in a while a new firmware may bereleased to improve the digital receiver. You can get thelatest firmware and a firmware update tool, which runs onmost versions of Windows, from the Topfield web site, http://www.i-topfield.com.

10.1 Checking the firmware information

You have to check up thefirmware information of yourdigital receiver before download-ing a new firmware. Select theInformation > IRD Status menu.You should see a screen like theleft figure.

Remember the number of theSystem ID item, and downloadthe latest firmware with thesame system identification.



10.1 Checking the firmware information 91

NOTE

It is only allowed to update with the firmware of which systemidentification is identical to that of yours. Otherwise you willfail in firmware update.

92 Firmware Update

10.2 From your computer via USB port

You can transfer a new firmware to the digital receiver fromyour computer by connecting them with a USB cable. Youneed TFDN USB, a firmware transfer utility for this, which isavailable from the web site, http://www.i-topfield.com.

To update the firmware by this method, perform the followingsteps:

1. Download a new firmware applicable toyour digital receiver from the Topfieldweb site.

2. Plug one end of a USB cable into the USBport on the digital receiver, and the otherend into the matching port on your com-puter.

3. Turn on the digital receiver.

4. Run TFDN USB.

The instructions on how to use TFDN USB are as follows:

1. Press the Find button to select thenew firmware file.

2. Press the download button, and thenrestart the digital receiver to start thefile transfer.

3. A countdown will be displayed onscreen or on the front display.

4. Restart the digital receiver oncemore when the file transfer is com-plete.


10.3 From your computer via RS-232 port 93

10.3 From your computer via RS-232 port

It is possible to transfer a new firmware to the digital receiverfrom your computer by connecting them with a RS-232 cable.You need TFD-Down, a firmware transfer utility for this, whichis available from the web site, http://www.i-topfield.com.

To update the firmware by this method, perform the followingsteps:

1. Download a new firmware applicable toyour digital receiver from the Topfieldweb site.

2. Turn off the digital receiver.

3. Plug one end of a RS-232 cable (9 pin D-sub cable) into the RS-232 port on the dig-ital receiver, and the other end into thematching port on your computer.

4. Run TFD-Down.

The instructions on how to use TFD-Down are as follows:

1. Press the Find button to select the newfirmware file.

2. Press the download button, and then turnon the digital receiver to start the file trans-fer.

3. A countdown will be displayed on screenor on the front display.

4. Restart the digital receiver when the filetransfer is complete.


94 Firmware Update

10.4 From another digital receiver via RS-232 port

It is possible to transfer the firmware from the digital receiverto another same digital receiver by connecting them with a RS-232 cable. To update the firmware with this method, performthe following steps:

1. Turn off the target digital receiver.

2. Plug one end of a RS-232 cable (9 pin D-sub cable) into the RS-232 port on the dig-ital receiver, and the other end into thematching port on the other digital receiver.

3. Turn on the source digital receiver if notalready on.

4. Select the Installation > Transfer Firmware> Transfer Firmware to Other IRD menu,then you get asked for confirmation; selectYes.

5. Turn on the target digital receiver to startthe firmware transfer.

6. A progress bar appears showing theprogress of the firmware transfer.

7. Restart the target digital receiver when thefirmware transfer is complete.

10.5 Over the air 95

10.5 Over the air

You can get a new firmware overthe air.

Select the Installation >

Firmware Upgrade menu.You should see a screen like theleft figure.

Selecting the Start commandstarts firmware update.

Satellite Astra (19.2° E)Frequency 12603 MHzSymbol Rate 22000 KS/sPolarisation HorizontalPID 347

On the left table is presentedthe transponder informationappointed by the manufac-turer, Topfield for firmwareupdate.

This transponder information can be changed. You can get theinformation from the web site, http://www.i-topfield.com.


96 INDEX

Index

16:9, 2116:9 Display Format, 221st Audio Language, 191st Subtitle Language, 1922 kHz, 312nd Audio Language, 192nd Subtitle Language, 194:3, 22

A/V Output Setting, 20Access Control, 26Add New Fav Group, 60Add Satellite, 56Add to Fav, 41Add Transponder, 57Advanced, 36After next program, 63After this program, 63ALL, 38All Service, 60Alphabetic, 41, 50, 70Altair, 76, 77Astra, 95AUDIO L, 15AUDIO L/R, 10AUDIO R, 15Auto, 35Auto Start, 89

Button, 4

C band, 29

CAM, 7CAS, 58CAS only, 37CAS–FTA, 41, 51Censorship, 26Center extract, 22Change PIN Code, 26CI, 7Common Interface, 7Common Interface, 7Connection Type, 30Cut, 75

Date, 66Daylight Saving Time, 24Default, 41, 50Delete, 41, 50Delete Current Fav Group, 59Delete Satellite, 57Delete Transponder, 57DHCP, 83Diab, 88DiSEqC, 31DiSEqC 1.0, 31, 32DiSEqC 1.1, 31, 32DiSEqC Command Mode, 33Download, 56download, 92, 93Download to STB, 55Duration, 63, 66DVB, 1

97

Edit Current Fav Group, 60Edit Satellite, 57Edit Transponder, 57Electronic Programme Guide, 45Every Day, 65Every Weekday, 66Every Weekend, 65

Factory Setting, 38Fav–NoFav, 41, 51Favorite Group, 59Favorite Group Name, 59, 60File List, 64, 69, 71, 74File Management, 85File Name, 66Find, 92, 93Firmware Upgrade, 95Format Hard Disk, 78Frequency, 33, 34, 36, 37FTA + CAS, 37FTA only, 37FTA–CAS, 41, 50FTA/Scrambled, 37

Gateway, 83GCC, 88GMT, 24Goto, 33Goto the position, 34

HDMI, 11, 14HDMI Output, 22high definition, 22Home Transponder, 28

Info Box Display Time, 27Info Box Position, 27information box, 43IP Address, 83IP Configuration, 83IRD Status, 90

Ku band, 30keyboard, 53

LAN, 79LAN, 11LAN Setting, 86LAN Status, 83Language Setting, 18Letter Box, 22LNB, 30LNB 1 IN, 10, 12, 30, 31LNB 1 OUT, 10, 12, 13, 30LNB 2 IN, 10, 12, 13, 30, 31LNB 2 OUT, 10, 12, 13LNB Frequency, 31LNB Power, 31LNB Setting, 30Local Time, 24Lock, 41, 50, 58, 70Locked, 70Loop Through, 30

Manual, 36MediaHighway, 28MediaHighway EPG, 28Menu Language, 18Mini A, 32Mode, 24, 66mono, 23Motor Control, 33Motorized DiSEqC 1.2, 32, 57Motorized DiSEqC 1.3, 34Move, 34, 50Movement, 33multifeed, 46My Latitude, 34My Longitude, 34

Network Search, 35, 36NEW, 51No block, 26normal-screen television, 22NTSC, 20

One Time, 65Organizing Favorites, 51Organizing Services, 49OSD Transparency, 27

98 INDEX

Other, 31

PAL, 20Parental Control, 26Password, 83picture-in-picture, 48PID, 36PIN, 26Polarization, 36port forwarding, 81Position Index, 57program file list, 89Program Files, 88progress bar, 68Provider, 41, 51

Radio, 60, 65Radio Service, 58radio services list, 50Record, 65Record continue, 63Record pause, 63recorded programme list, 69Rename, 41, 50, 70RS-232, 11, 54, 55, 93, 94

S-VIDEO, 10, 15, 23S/PDIF, 10, 16Satellite, 40, 41, 50, 57, 65Satellite Angle, 34Satellite Information, 56satellite list, 30, 42Satellite Name, 28, 30, 31, 33–37, 56Save, 75SCART Output, 21Search Mode, 35–37Separated, 30Serial, 55Service, 65Service Search, 35Services Copy, 37services list, 39Show Provider, 41Size, 70SMATV, 35

SMATV, 37Sort, 50Sorting, 41, 70Sound Mode, 23specifications, 9, 11Start, 95Start Search, 37Start Time, 66std, 54, 55stereo, 23Store, 33Subnet Mask, 83subtitle, 44Symbol Rate, 36, 37System ID, 90System Setting, 27

TAP, 88tap, 88teletext, 44television services list, 50TFD-Down, 93TFDN USB, 92Time, 70time format, 24Time Offset, 24Time Setting, 24, 26Time Shifting, 27, 46, 62timer list, 65Timer Setting, 65Total block, 26TP List, 57Transfer Data to Other IRD, 54Transfer Firmware to Other IRD, 94Transponder, 33, 34, 51transponder, 1Tuner, 41Tuner 1, 30Tuner 1 to Tuner 2, 38Tuner 2, 30Tuner 2 to Tuner 1, 38Tuner Select, 28, 30, 33, 34, 65Turbo Off, 78TV, 11, 14, 23, 65TV Aspect Ratio, 21, 22

99

TV Service, 58TV Type, 20, 22Type, 65

Upload, 55Upload from STB, 55USALS, 33USALS Setting, 34USB, 11, 55, 77, 92User, 33User ID, 83

VCR, 11, 16VCR Scart Type, 21Vega, 54VIDEO, 10, 13, 15, 23Video Output Scaling, 23

Weekly, 65wide-screen television, 21Wind River, 88

Correct disposal of this product

This marking shown on the product or its literature indicates that it shouldnot be disposed with other household wastes at the end of its working life. Toprevent possible harm to the environment or human health from uncontrolledwaste disposal, please separate this from other types of wastes and recycle itresponsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased thisproduct or their local government office for details of where and how theycan dispose this product for environmentally safe recycling.

Business users should contact their supplier and check the terms and condi-tions of the purchase contract. This product should not be mixed with othercommercial wastes for disposal.

Topfield continues to improve the digital receiver which this guide explains. So some expla-nations and illustrations in this guide could be different from the actual digital receiver.

Copyright © 2008, Topfield Co., Ltd. English versionhttp://www.i-topfield.com 110T-11326-201-0


Documents

User guide for TF6000PVR ES · Title: User guide for TF6000PVR ES Author: Topfield Created Date: 4/1/2008 2:29:42 PM