User Guide - CNET Contentcdn.cnetcontent.com/2a/34/2a3466b8-94c5-4296-9194-efbbdf2b93c… · any area where it may become wet. Place the monitor on a stable surface. • Unplug the

VE228 Series

LED Monitor

User Guide

ii

Contents

Notices ......................................................................................................... iiiSafety information ...................................................................................... ivCare & Cleaning ........................................................................................... v1.1 Welcome! .................................................................................... 1-11.2 Package contents ......................................................................... 1-11.3 Monitor introduction .................................................................... 1-2

1.3.1 Front view ....................................................................... 1-2

1.3.2 Back view ........................................................................ 1-3

2.1 Assembling the monitor base ..................................................... 2-12.2 Adjusting the monitor .................................................................. 2-12.3 Detaching the arm/base (for VESA wall mount) ........................ 2-22.4 Connecting the cables ................................................................. 2-32.5 Turning on the monitor ................................................................ 2-43.1 OSD (On-Screen Display) menu ................................................ 3-1

3.1.1 How to reconfigure .......................................................... 3-1

3.1.2 OSD Function Introduction .............................................. 3-1

3.2 Specificationssummary ............................................................. 3-43.3 Troubleshooting (FAQ) ................................................................ 3-93.4 Supported operating modes ..................................................... 3-10

iii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• Thisdevicemaynotcauseharmfulinterference,and

• Thisdevicemustacceptanyinterferencereceivedincludinginterferencethatmaycauseundesiredoperation.

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesigned to provide reasonable protection against harmful interference in a residentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewithmanufacturer’sinstructions,maycauseharmfulinterferencetoradiocommunications.However,there is no guarantee that interference will not occur in a particular installation. If thisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmenttoanoutletonacircuitdifferentfromthattowhichthereceiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications tothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatethisequipment.

AsanEnergyStar® Partner,ourcompanyhasdeterminedthatthisproductmeetstheEnergyStar® guidelinesforenergyefficiency.

Canadian Department of Communications Statement

ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradionoiseemissionsfrom digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

iv

Safety information• Beforesettingupthemonitor,carefullyreadallthedocumentationthatcame

with the package.

• Topreventfireorshockhazard,neverexposethemonitortorainormoisture.

• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltagesinsidethemonitormayresultinseriousphysicalinjury.

• Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contactaqualifiedservicetechnicianoryourretailer.

• Beforeusingtheproduct,makesureallcablesarecorrectlyconnectedandthepowercablesarenotdamaged.Ifyoudetectanydamage,contactyourdealerimmediately.

• Slotsandopeningsonthebackortopofthecabinetareprovidedforventilation.Donotblocktheseslots.Neverplacethisproductnearoroveraradiator or heat source unless proper ventilation is provided.

• Themonitorshouldbeoperatedonlyfromthetypeofpowersourceindicatedonthelabel.Ifyouarenotsureofthetypeofpowersupplytoyourhome,consultyourdealerorlocalpowercompany.

• Usetheappropriatepowerplugwhichcomplieswithyourlocalpowerstandard.

• Donotoverloadpowerstripsandextentioncords.Overloadingcanresultinfire or electric shock.

• Avoiddust,humidity,andtemperatureextremes.Donotplacethemonitorinanyareawhereitmaybecomewet.Placethemonitoronastablesurface.

• Unplugtheunitduringalightningstormorifitwillnotbeusedforalongperiodof time. This will protect the monitor from damage due to power surges.

• Neverpushobjectsorspillliquidofanykindintotheslotsonthemonitorcabinet.

• Toensuresatisfactoryoperation,usethemonitoronlywithULlistedcomputers which have appropriate configured receptacles marked between 100-240VAC.

• Ifyouencountertechnicalproblemswiththemonitor,contactaqualifiedservicetechnicianoryourretailer.

Thissymbolofthecrossedoutwheeledbinindicatesthattheproduct(electrical,electronicequipment,andmercury-containingbuttoncellbattery)shouldnotbe placed in municipal waste. Please check local regulations for disposal of electronic products.

v

Care & Cleaning• Beforeyouliftorrepositionyourmonitor,itisbettertodisconnectthecables

and power cord. Follow the correct lifting techniques when positioning the monitor.Whenliftingorcarryingthemonitor,grasptheedgesofthemonitor.Donotliftthedisplaybythestandorthecord.

• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthemonitorsurfacewithalint-free,non-abrasivecloth.Stubbornstainsmayberemovedwith a cloth dampened with mild cleaner.

• Avoidusingacleanercontainingalcoholoracetone.Useacleanerintendedforusewiththemonitor.Neverspraycleanerdirectlyonthescreen,asitmaydripinside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:• Thescreenmayflickerduringtheinitialuseduetothenatureofthefluorescent

light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.

• Youmayfindslightlyunevenbrightnessonthescreendependingonthedesktoppatternyouuse.

• Whenthesameimageisdisplayedforhours,anafterimageofthepreviousscreenmayremainafterswitchingtheimage.ThescreenwillrecoverslowlyoryoucanturnoffthePowerSwitchforhours.

• Whenthescreenbecomesblackorflashes,orcannotworkanymore,contactyourdealerorservicecentertofixit.Donotrepairthescreenbyyourself!

Conventions used in this guide

WARNING:Informationtopreventinjurytoyourselfwhentryingtocomplete a task.

CAUTION:Informationtopreventdamagetothecomponentswhentryingtocompleteatask.

IMPORTANT:InformationthatyouMUSTfollowtocompleteatask.

NOTE:Tipsandadditionalinformationtoaidincompletingatask.

vi

WheretofindmoreinformationRefer to the following sources for additional information and for product and software updates.

1. ASUS websitesTheASUSwebsitesworldwideprovideupdatedinformationonASUShardwareandsoftwareproducts.Refertohttp://www.asus.com

2. Optional documentationYourproductpackagemayincludeoptionaldocumentationthatmayhavebeenaddedbyyourdealer.Thesedocumentsarenotpartofthestandardpackage.

1-1ASUSVE228SeriesLEDMonitor

1.1 Welcome! ThankyouforpurchasingtheASUS®LEDmonitor!

The latestwidescreenLEDmonitor fromASUSprovidesa crisper, broader, andbrighterdisplay,plusahostoffeaturesthatenhanceyourviewingexperience.

With these features, you canenjoy the convenienceanddelightful visualexperiencethatthemonitorbringsyou!

1.2 Package contentsCheckyourpackageforthefollowingitems:

LEDmonitor

Monitor base and screw

Warrantycard

Quick start guide

Power cord

VGAcable

DVIcable

Audio cable

Ifanyoftheaboveitemsisdamagedormissing,contactyourretailerimmediately.

1-2 Chapter 1: Product introduction

1.3 Monitor introduction

1.3.1 Front view

VE228H

VE228T/VE228S

VE228N/VE228D

1

S/A Volume/Down Menu Brightness/Up Input Select Power Key

S Volume/Down Menu Brightness/Up A Power Key

S Contrast/Down Menu Brightness/Up A Power Key

2 643 5 1

1. , , Button:

• Usethishotkeytoswitchfromfivevideopresetmodes(StandardMode,TheaterMode,GameMode,Night ViewMode, SceneryMode)withSPLENDID™VideoEnhancementTechnology.( , )

• ExittheOSDmenuorgobacktothepreviousmenuastheOSDmenuisactive.( , )

• Automaticallyadjusttheimagetoitsoptimizedposition,clock,andphasebypressingthisbuttonfor2-4seconds(forVGAmodeonly.)( , )

2. , Button:

• Press this button to decrease the value of the function selected or move left/downtothepreviousfunction.

• ThisisalsoahotkeyforVolumeadjustment.( )

• ThisisalsoahotkeyforContrastadjustment.( )

3. MENUButton:

• Turns on the OSD menu.


• Pressthisbuttontoenter/selecttheicon(function)highlightedwhiletheOSD is activated.

4. Button:

• Press this button to increase the value of the function selected or move right/uptothenextfunction.

• ThisisalsoahotkeyforBrightnessadjustment.

5. Button:

• Pressthisbuttontocyclethroughtheavailableinputsources.

Press (InputSelectbutton)todisplayHDMIsignalsafteryouconnectHDMI cable with the monitor.

6. Powerbutton/powerindicator

• Pressthisbuttontoturnthemonitoron/off

• The color definition of the power indicator is as the below table.

Status Description Blue ON Amber Standbymode OFF OFF

1.3.2 Back view

2 33 4 5 6 5 61 1

VE228TVE228N

VE228D

VE228SVE228H

Screw holes for VESA wall mount

Rear connectorsKensington lock slot

1-4 Chapter 1: Product introduction

Rear connectors (Pleasereferto3.2Specificationssummaryformodels)

1. AC-IN port. This port connects the power connector from the bundled power cord.

2. Earphone jack3. Audio-in port.ThisportconnectsPCaudiosourcebythebundledaudio

cable.

4. HDMI port. This port is for connection with an HDMI device.

5. DVI port.This24-pinportisforPC(PersonalComputer)DVI-Ddigitalsignalconnection.

6. VGA port.This15-pinportisforPCVGAconnection.

TheVESAwallmountkit(100mmx100mm)ispurchasedseparately.


2.1 Assembling the monitor base

To assemble the monitor base:

1. Have the front of the monitor face down on a table.

2. Assemblethebaseandthearmbyaligningthearrowmarksonthebaseandthe arm.

3. Fixthebasetothearmbyfasteningthebundledscrew.

Werecommendthatyoucoverthetablesurfacewithsoftclothtopreventdamage to the monitor.

1

Release Lock

2

2.2 Adjusting the monitor• Foroptimalviewing,werecommendthatyoulookatthefullfaceofthe

monitor,thenadjustthemonitortotheanglethatismostcomfortableforyou.

• Holdthestandtopreventthemonitorfromfallingwhenyouchangeitsangle.

• Therecommendedadjustingangleisfrom-5˚to20˚.

-5˚~20˚

Itisnormalthatthemonitorslightlyshakeswhileyouadjustthetheviewingangle.

2-2 Chapter 2: Setup

2.3 Detaching the arm/base (for VESA wall mount)

Thedetachablearm/baseofthisLEDmonitorisspeciallydesignedforVESAwallmount.

Todetachthearm/base:

1. Have the front of the monitor face down on a table.

2. Removetherubbersinthefourscrewholes(Figure1).

3. Useascrewdrivertoremovethetwoscrewsonthearm(Figure2),thenslideoutthearm/basetodetachitfromthemonitor(Figure2).

1

Release Lock

Arm/base

Rubbers in the screw holes

Figure 1 Figure 2

2

1

Release Lock

We recommend that you cover the table surfacewith soft cloth to preventdamage to the monitor.


2.4 Connecting the cables1. Connect the cables as the following instructions:

VGAEarphone jack HDMI Audio-in

Audio-in

VE228TVE228N

VE228D

VE228SVE228H

VGA

• To connect the audio cable: connect one end of the audio cable to the monitor’sAudio-inport,theotherendtothecomputer'saudio-outport.

• To connect the power cord:connectoneendofthepowercordsecurelytothemonitor’sACinputport,theotherendtoapoweroutlet.

• To connect the VGA/DVI/HDMI cable:

a. PlugtheVGA/DVI/HDMIconnectortotheLEDmonitor’sVGA/DVI/HDMIport.

b. ConnecttheotherendoftheVGA/DVI/HDMIcabletoyourcomputer'sVGA/DVI/HDMI.

c. TightenthetwoscrewstosecuretheVGA/DVIconnector.

• To use earphones:connecttheendwithplugtypetothemonitor’searphonejack.

Whenthesecablesareconnected,youcanchoosethedesiredsignalfromtheInput Select item of the OSD functions.

2. Gatherallthecableswiththecablemanagementslot.

Cable management slot

2-4 Chapter 2: Setup

2.5 Turning on the monitorGentlypressthepowerbutton . See page 1-3 for the location of the power button. The power indicator lightsupinbluetoshowthatthemonitorisON.


3.1 OSD (On-Screen Display) menu

3.1.1 How to reconfigure1. PresstheMENUbuttontoactivatethe

OSD menu.

2. Press (or ),and to navigate through the functions. HighlightandactivatethedesiredfunctionbypressingtheMENUbutton.Ifthefunctionselectedhasasub-menu,press (or ),and again to navigate through the sub-menu functions. Highlight and activate the desiredsub-menufunctionbypressingtheMENUbutton.

3. Press (or ), and to change the settings of the selected function.

4. ToexittheOSDmenu,pressthe or button. Repeat step 2 and step 3toadjustanyotherfunction.

3.1.2 OSD Function Introduction1. Spendid

This function contains five sub-functions youcanselectforyourpreference.EachmodehastheResetselection,allowingyoutomaintainyoursettingorreturntothepreset mode.

• Scenery Mode:bestchoiceforsceneryphotodisplaywithSPLENDID™VideoEnhancement.

• Standard Mode:bestchoicefordocumenteditingwithSPLENDID™VideoEnhancement.

• Theater Mode:bestchoiceformoviewithSPLENDID™VideoEnhancement.

• Game Mode:bestchoiceforgameplayingwithSPLENDID™VideoEnhancement.

• Night View Mode: best choice for dark-scene game or movie with SPLENDID™VideoEnhancement.

• IntheStandardMode,theSaturationandSharpnessfunctionsarenotuser-configurable.

• Intheothermodes,thesRGBfunctionisnotuser-configurable.

3-2 Chapter3:GeneralInstruction

2. Image Youcanadjustbrightness,contrast,sharpness,saturation,position(VGAonly),andfocus(VGAonly)fromthismenu.

• Brightness: the adjusting range is from 0 to 100. isahotkeytoactivate this function.

• Contrast: the adjusting range is from 0 to 100.

• ASCR:turnson/offtheASCR(ASUSSmartContrastRatio)function.• Sharpness: the adjusting range is from 0 to 100.

• Saturation: the adjusting range is from 0 to 100.

• Position:adjuststhehorizontalposition(H-Position)andtheverticalposition(V-Position)oftheimage.Theadjustingrangeisfrom0to100.

• Focus:reducesHorizonal-linenoiseandVertical-linenoiseoftheimagebyadjusting(Phase)and(Clock)separately.Theadjustingrangeisfrom0 to 100.

• Phaseadjuststhephaseofthepixelclocksignal.Withawrongphaseadjustment,thescreenshowshorizontaldisturbances.

• Clock(pixelfrequency)controlsthenumberofpixelsscannedbyonehorizontalsweep.Ifthefrequencyisnotcorrect,thescreenshowsverticalstripes and the image is not proportional.

3. ColorSelecttheimagecoloryoulikefromthisfunction.

• Color Temp.:containsfivecolormodesincludingCool,Normal,Warm,sRGB,andUsermode.

• Skin Tone:containsthreecolormodesincludingReddish,Natural,andYellowish.

IntheUsermode,colorsofR(Red),G(Green),andB(Blue)areuser-configurable; the adjusting range is from 0-100.


4. Input Select Inthisfunction,youcanselectyourdesired input source.

5. System Setup Allowyoutoadjustthesystem.

• Splendid Demo Mode: turnson/offASUSSplendidDemofunction.• Volume: the adjusting range is from 0 to 100. isahotkeyto

activate this function.

• Aspect Control: adjusts the aspect ratio to full or 4:3.

• OSD Setup:

* Adjuststhehorizontalpostition(H-Position)/theverticalposition(V-Position)oftheOSDfrom0to100.

* Adjusts the OSD timeout from 10 to 120.

* EnablesordisablestheDDC/CIfunction.

• Language:thereare11languagesforyourselection,includingEnglish,German,Italian,French,Dutch,Spanish,Russian,TraditionalChinese,SimplifiedChinese,Japanese,andKorean.

• Information: shows the monitor information. • All Reset:“Yes”allowsyoutorestorethedefaultsetting.


3.2 Specificationssummary(VE228H)

Panel Type TFTLCDPanel size 21.5"(54.6cm,16:9)widescreenMax. Resolution 1920x1080Pixel pitch 0.248mmBrightness (Typ.) 250cd/m2

Contrast Ratio (Typ.) 1000:1Contrast Ratio (Max.) 10000000:1(withASCRon)Viewing angle(H/V) CR>10 170˚/160˚Display colors 16.7 MResponse time 5 msSPLENDID™ Video Enhancement

Yes

SPLENDID™ selection 5videopresetmodes(byhotkey)Auto adjustment Yes(byhotkey)Color temperature selection 5 color temperaturesSkin-Tone selection 3 skin-tonesDigital input DVI-DwithHDCP;HDMIv1.3Analog input D-SubAudio-in port 3.5 mm Mini-jackEarphone jack YesColors BlackSpeaker (Built-in) 1Wx2Stereo,RMSPower LED Blue(On)/Amber(Standby)VESA wall mount 100x100mmTilt -5˚~+20˚Kensington lock YesVoltage rating AC:100~240VPower consumption PowerOn:<30W,Standby:<1W,PowerOff:<1W

Temperature (Operating) 0˚C~40˚C

Temperature (Non-operating)

-20˚C~+60˚C

Dimension (W x H x D) 512.84mmx385.96mmx201.01mm(machine) 576mmx468mmx148mm(package)

Weight (Esti.) 4.1kg(Net);6.1kg(Gross)

Multi-languages 11languages(English,German,Italian,French,Dutch,Spanish,Russian,TraditionalChinese,SimplifiedChinese,Japanese,Korean)

Accessories VGAcable,DVIcable,Audiocable,Powercord,Quickstartguide,Warrantycard

Regulation approvals EnergyStar®,CB,CE,Gost-R,CCC,UL/cUL,FCC,C-Tick,BSMI,VCCI,RoHS,WEEE,PSB,J-MOSS,EuP,WindowsVista,Windows7WHQL

*Specificationsaresubjecttochangewithoutnotice.


Specificationssummary(VE228T)



Yes

SPLENDID™ selection 5videopresetmodes(byhotkey)Auto adjustment Yes(byhotkey)Color temperature selection 5 color temperaturesSkin-Tone selection 3 skin-tonesDigital input DVI-DwithHDCPAnalog input D-SubAudio-in port 3.5 mm Mini-jackEarphone jack NoColors BlackSpeaker (Built-in) 1Wx2Stereo,RMSPower LED Blue(On)/Amber(Standby)VESA wall mount 100x100mmTilt -5˚~+20˚Kensington lock YesVoltage rating AC:100~240VPower consumption PowerOn:<30W,Standby:<1W,PowerOff:<1W



-20˚C~+60˚C




Accessories VGAcable,DVIcable,Audiocable,Powercord,Quickstartguide,Warrantycard




Specificationssummary(VE228N)



Yes

SPLENDID™ selection 5videopresetmodes(byhotkey)Auto adjustment Yes(byhotkey)Color temperature selection 5 color temperaturesSkin-Tone selection 3 skin-tonesDigital input DVI-DwithHDCPAnalog input D-SubAudio-in port NoEarphone jack NoColors BlackSpeaker (Built-in) NoPower LED Blue(On)/Amber(Standby)VESA wall mount 100x100mmTilt -5˚~+20˚Kensington lock YesVoltage rating AC:100~240VPower consumption PowerOn:<30W,Standby:<1W,PowerOff:<1W



-20˚C~+60˚C




Accessories VGAcable,DVIcable,Powercord,Quickstartguide,Warrantycard




Specificationssummary(VE228S)



Yes

SPLENDID™ selection 5videopresetmodes(byhotkey)Auto adjustment Yes(byhotkey)Color temperature selection 5 color temperaturesSkin-Tone selection 3 skin-tonesDigital input NoAnalog input D-SubAudio-in port 3.5 mm Mini-jackEarphone jack NoColors BlackSpeaker (Built-in) 1Wx2StereoPower LED Blue(On)/Amber(Standby)VESA wall mount 100x100mmTilt -5˚~+20˚Kensington lock YesVoltage rating AC:100~240VPower consumption PowerOn:<30W,Standby:<1W,PowerOff:<1W



-20˚C~+60˚C




Accessories VGAcable,Audiocable,Powercord,Quickstartguide,Warrantycard




Specificationssummary(VE228D)



Yes

SPLENDID™ selection 5videopresetmodes(byhotkey)Auto adjustment Yes(byhotkey)Color temperature selection 5 color temperaturesSkin-Tone selection 3 skin-tonesDigital input NoAnalog input D-SubAudio-in port NoEarphone jack NoColors BlackSpeaker (Built-in) NoPower LED Blue(On)/Amber(Standby)VESA wall mount 100x100mmTilt -5˚~+20˚Kensington lock YesVoltage rating AC:100~240VPower consumption PowerOn:<30W,Standby:<1W,PowerOff:<1W



-20˚C~+60˚C




Accessories VGAcable,Powercord,Quickstartguide,Warrantycard




3.3 Troubleshooting (FAQ)

Problem Possible Solution

PowerLEDisnotON • Press the button to check if the monitor isintheONmode.

• Checkifthepowercordisproperlyconnected to the monitor and the power outlet.

ThepowerLEDlightsamberandthereisno screen image

• Check if the monitor and the computer are intheONmode.

• Makesurethesignalcableisproperlyconnected the monitor and the computer.

• Inspect the signal cable and make sure none of the pins are bent.

• Connect the computer with another available monitor to check if the computer isproperlyworking.

Screen image is too light or dark • Adjust the Contrast and Brightness settings via OSD.

Screenimageisnotcenteredorsizedproperly

• Press the or button for two secondstoautomaticallyadjusttheimage.(forVGAmodeonly)

• AdjusttheH-PositionorV-Positionsettings via OSD.

Screen image bounces or a wave pattern is present in the image

• Makesurethesignalcableisproperlyconnected to the monitor and the computer.

• Moveelectricaldevicesthatmaycauseelectrical interference.

Screenimagehascolordefects(whitedoesnotlookwhite)

• Inspect the signal cable and make sure that none of the pins are bent.

• Perform Reset via OSD.• AdjusttheR/G/Bcolorsettingsorselect

the Color Temperature via OSD.Screenimageisblurryorfuzzy • Press the or button for two

secondstoautomaticallyadjusttheimage(forVGAmodeonly).

• Adjust the Phase and Clock settings via OSD.

Nosoundorsoundislow • Ensurethattheaudiocableisproperlyconnected to the monitor and the computer.

• Adjustthevolumesettingsofbothyourmonitor and computer.

• Ensure that the computer sound card driverisproperlyinstalledandactivated.


3.4 Supported operating modes

Resolution Frequency

Horizontal Frequency

Vertical Frequency (Hz)

Pixel (MHz)

640x480 31.47(N) 59.94(N) 25.18

640x480 35.00(N) 66.66(N) 30.24

640x480 37.87(N) 72.82(N) 31.5

640x480 37.5(N) 75.00(N) 31.5

720x400 31.47(N) 70.08(P) 28.32

800x600 35.16(P) 56.25(P) 36.00

800x600 37.88(P) 60.32(P) 40.00

800x600 48.08(P) 72.12(P) 50.00

800x600 46.86(P) 75.00(P) 49.50

832X624 49.72(P/N) 74.55(P/N) 57.28

1024x768 48.36(N) 60.00(N) 65.00

1024x768 56.476(N) 70.069(N) 75.00

1024x768 60.02(N) 75.00(N) 78.75

1152x864 67.5(P/N) 75.00(P/N) 108.00

1280x960 60.00(P) 60.00(N) 108.00

1280x1024 63.98(P) 60.02(P) 108.00

1280x1024 79.98(P) 75.02(P) 135.00

1366x768 47.712(P) 59.79(P) 85.50

1440x900 55.94(N) 59.89(P) 106.50

1600x1200 75.00(P) 60.00(P) 162.00

1680x1050 65.29(N) 60.00(P) 146.25

1920x1080 67.5(P) 60.00(P) 148.5

* Modes not listed in the table may not be supported. For optimal resolution, we recommend that you choose a mode listed in the table above.

* This monitor supports full HD (480p, 576p, 720p, 1080i/p) video content from game consoles, DVD players and other consumer video devices via HDMI.

Documents

User Guide - CNET Contentcdn.cnetcontent.com/2a/34/2a3466b8-94c5-4296-9194-efbbdf2b93c… · any area where it may become wet. Place the monitor on a stable surface. • Unplug the