user manual

SB916

Dishwasher

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 1

2 The Thoughtful Design Innovator

The Thoughtful Design Innovator.

Do you remember the last time you opened a gift that made you say“Oh! How did you know? That’s exactly what I wanted!” That’s the kind offeeling that the designers at Electrolux seek to evoke in everyone whochooses or uses one of our products. We devote time, knowledge, and agreat deal of thought to anticipating and creating the kind of appliances thatour customers really need and want.

This kind of thoughtful care means innovating with insight. Not design fordesign’s sake, but design for the user’s sake. For us, thoughtful design meansmaking appliances easier to use and tasks more enjoyable to perform, freeingour customers to experience that ultimate 21st century luxury, ease of mind.Our aim is to make this ease of mind more available to more people in moreparts of their everyday lives, all over the world. So when we say we’re thinkingof you, you know we mean just that.

Electrolux. Thinking of you.

Westinghouse. We are part of the Electrolux family.Share more of our thinking at:www.electrolux.com.au / www.westinghouse.com.au

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 2

Safety information 4

Product description 6

Control panel 7

First use 9

Daily use 10

Washing programmes 20

Care and cleaning 21

Something not working 23

Technical data 26

Hints for test institutes 28

Installation 29

Building-in 31

Environment concerns 33

Warranty 34

Contents

The following symbols are used in this manual:

Important information concerning your personal safety and information onhow to avoid damaging the appliance.

General information and tips

Environmental information

contents 3

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 3

Safety information

4 safety information

In the interest of your safety and toensure correct use, beforeinstalling and first using theappliance, read this user manualcarefully, including its hints andwarnings. To avoid unnecessarymistakes and accidents, it isimportant to ensure that all peopleusing the appliance are thoroughlyfamiliar with its operation andsafety features. Save theseinstructions and make sure thatthey remain with the appliance if itis moved or sold, so that everyoneusing it through its life will beproperly informed on appliance useand safety.

Correct use● This dishwasher is only intended

for washing household utensilssuitable for machine washing.

● Do not put any solvents in thedishwasher. This could cause anexplosion.

● Knives and other items with sharppoints must be loaded in thecutlery basket with their pointsdown or placed in a horizontalposition in the upper basket.

● Only use products (detergents,cleaners, rinse aid etc) suitable fordishwashers.

● Avoid opening the door whilst theappliance is in operation, hotsteam may escape.

● Do not take any dishes out of thedishwasher before the end of thedishwashing cycle.

● If the supply cord is damaged, itmust be replaced by themanufacturer or its service agentor a similarly qualified person inorder to avoid a hazard.

● This product should be servicedonly by an authorised serviceengineer, and only genuine spareparts should be used.

General safety● Dishwasher detergents are very

alkaline and extremely dangerousif swallowed. Be careful to: keepthem away from your eyes andskin, keep children from thedishwasher when the door isopened, and only put detergent inthe dispenser when you are readyto wash. Otherwise, check that thedetergent receptacle in thedispenser is empty after thecompletion of the wash cycle.

● Water in the dishwasher is not fordrinking purposes. Detergentresidues may still be present inyour machine.

● Ensure that the door of thedishwasher is always closed whenit is not being loaded or unloaded.In this way you will avoid anybodytripping over the open door andhurting themselves.

● Do not sit or stand on the opendoor.

● In the unlikely event this product issubject to a recall notice, info canbe obtained from :www.productrecalls.gov.au or bycontacting your local CustomerCare Centre.

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 4

Installation● Check your dishwasher for any

transport damage. Never connecta damaged machine. If yourdishwasher is damaged contactyour supplier.

● All packaging must be removedbefore use.

● Any electrical and plumbing workrequired to install this appliancemust be carried out by a qualifiedand competent person.

● For safety reasons it is dangerousto alter the specifications orattempt to modify this product inany way.

● Never use the dishwasher if theelectrical supply cable and waterhoses are damaged; or if thecontrol panel, work top or plintharea are damaged such that theinside of the appliance is freelyaccessible. Contact your localCustomer Care Centre, in order toavoid hazard.

● All sides of the dishwasher mustnever be drilled to prevent damageto hydraulic and electriccomponents.

For electrical and water connectioncarefully follow the instructionsgiven in specific paragraphs.

Child safety● This appliance is not intended for

use by young children or infirmpersons unless they have beenadequately supervised by aresponsible person to ensure thatthey can use the appliance safely.

● Young children should besupervised to ensure that they do not play with the appliance.

● Keep all packaging well away fromchildren. There is risk ofsuffocation.

● Keep all detergents in a safe placeout of children’s reach.

● Keep children well away from thedishwasher when the door is open.

safety information 5

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 5

Product description

9

6 product description

Top shower

Upper basket

Pressure balancing device

Detergent dispenser

Rinse aid dispenser

Rating plate

Filters

Lower spray arm

Upper spray arm

1

2

3

4

5

6

7

8

9

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 6

Control panel

POWER light

POWER button

PROGRAM selection button

DELAY button

START / Button LOCK

START light

Indicator lights

DISPLAY

Program lights

1

2

3

4

5

6

The digital display indicates:

- the approximate remaining time ofthe running program,

- the end of a washing program (azero will appear in the digitaldisplay),

- the countdown of the delay start,- fault codes concerning

malfunction of the dishwasher.- activation of button lock (CL).7

8

9

control panel 7

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 7

8 control panel

The rinse aid indicator light isnever illuminated while a washingprogram is running even if fillingwith rinse aid is necessary.

Indicator lights

Button Lock Flashes for 15 seconds when theSTART/Button LOCK is pressed for 5 seconds.Illuminates when the function Button lock isactivated.

Rinse aid Illuminates when the rinse aid has run out.

Setting mode

To cancel a set program or aprogram in progressSimultaneously press and hold thetwo program buttons positioned overthe word Cancel, until only thePOWER light is on. The program hasbeen cancelled and the machine isnow in setting mode.

If any button is pressed, an audiblesignal indicates that the key lockfuntion is active.To cancel the selected program andselect a new one, reset thedishwasher by:- pressing the START button for 5

seconds (the keylock light blinks for15 seconds)

- press and hold simultaneouslyPROGRAM and DELAY buttons(Cancel) for approximately 3seconds or until the program lightindicator switches off, then theprogram has been cancelled andthe key lock deactivated and a newprogram can be selected.

The button LOCK option isautomatically deactivated at the endof the selected program by switchingOFF the dishwasher or opening andclosing the door.

Button Lock optionClose the door.Press the POWER button.Press the program Button to select aprogram.Press the Delay button if needed.Press the START button to start thecycle.To activate the Button LOCK function,press the START button for 5seconds, the button lock light blinksfor 15 seconds, then when it ispermanently on, it indicates it isactive. The button lock key stopsanyone from changing the selectedprogram.

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 8

Before using your dishwasher for thefirst time:● Ensure that the electrical and

water connections comply with theinstallation instructions

● Remove all packaging from insidethe appliance

● Fill the rinse aid dispenser

First use

The dispenser holds about 110 ml ofrinse aid, which is sufficient forbetween 16 and 40 dishwashingcycles, depending upon the dosagesetting. According to the finish anddrying results obtained, adjust thedose of rinse aid by means of the 6position selector (position 1 minimumdosage, position 6 maximum dosage).

Filling with rinse aidRinse aid ensures thorough rinsing,and spot and streak free drying.Rinse aid is automatically addedduring the last rinse.

1. Open the container by pressingthe release button (A).

2. Add the rinse aid in the container.The maximum level for filling isindicated by "max".

The dose is factory set in position 4.Increase the dose if there are dropsof water or lime spots on the dishesafter washing.Reduce it if there are sticky whitishstreaks on the dishes or a bluish filmon glassware or knife blades.3. Ensure that the lid is closed after

every refill.

Clean up any rinse aid spilt duringfilling with an absorbent cloth toavoid excess foaming during thenext wash.Only use branded rinse aid fordishwashers.Never fill the rinse aid dispenserwith any other substances (e.g.dishwasher cleaning agent, liquiddetergent). This may damage theappliance.

first use 9

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 9

● Check if it’s necessary to refill withrinse aid

● Load cutlery and dishes into thedishwasher.

● Fill with dishwasher detergent .

● Select a wash program suitable forthe cutlery and dishes.

● Start the wash program.

Loading cutlery and dishesSponges, household cloths and anyobject that can absorb water must notbe washed in the dishwasher.

● Before loading the dishes, youshould:

- Remove all left over food and debris.

- Soften remnants of burnt food in pans

● When loading the dishes andcutlery, please note:

- Dishes and cutlery must not impede the rotation of the spray arms .

- Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that watercannot collect in the container or a deep base.

- Dishes and items of cutlery must not lie inside one another, or cover each other.

- To avoid damage to glasses, they must not touch.

Daily use

- Lay small objects in the cutlery basket.

● Plastic items and pans with nonstick coatings have a tendency toretain water drops; these items willnot dry as well as porcelain andsteel items.

10 daily use

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 10

For washing in the dishwasher the following cutlery and dishes

are not suitable: - Cutlery with wooden, horn, china or mother-of-pearls handles.

- Plastic items that are not heat resistant.

- Older cutlery with glued parts that are nottemperature resistant.

- Bonded cutlery items or dishes.

- Pewter or copper items.

- Lead crystal glass.

- Steel items prone to rusting.

- Wooden platters.

- Items made from synthetics fibres.

are of limited suitability: - Only wash stoneware in the dishwasher if it isspecially marked as being dishwasher-safe by themanufacturer.

- Glazed patterns may fade if machine washedfrequently.

- Silver and aluminium parts have a tendency todiscolour during washing: Residues, e.g. eggwhite, egg yolk and mustard often causediscolouring and staining on silver. Thereforealways clean left-overs from silver immediately, if itis not to be washed straight after use.

daily use 11

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 11

Open the door and slide out thebaskets to load the dishes.

The lower basketThe lower basket is designed to takesaucepans, lids, plates, salad bowls,cutlery etc.Serving dishes and large lids shouldbe arranged around the edge of thebasket, ensuring that the spray armscan turn freely.

The 2 rear rows of prongs on thelower basket can be easily lowered toallow you to load pots, pans andbowls.

12 daily use

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 12

For best results we recommend youuse the cutlery grids.If the size and dimensions of thecutlery do not allow the use of thegrids, they can be easily hidden orremoved.

The cutlery basket

Long bladed knives stored in anupright position are a potentialhazard.Long and/or sharp items of cutlerysuch as carving knives must bepositioned horizontally in the upperbasket.Take care when loading orunloading sharp items such asknives.

Forks and spoons should be placed inthe removable cutlery basket with thehandles facing downwards and theknives with their handles facingupwards .

If the handles protrude from thebottom of the basket, obstructing thelower spray arm, load the cutlery withthe handles facing upwards.Mix spoons with other cutlery toprevent them from sticking together.

daily use 13

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 13

The upper basket The upper basket is designed forplates (dessert plates, saucers, dinnerplates of up to 24 cm in diameter),salad bowls, cups and glasses.Arrange items on and underneath thecup racks so that water can reach allsurfaces.

Glasses with long stems can beplaced upside down in the cup racks.For taller items, the cup racks can befolded upwards.

Light items (plastic bowls etc.) mustbe loaded in the upper basket andarranged so they do not move.

Before closing the door, ensure thatthe spray arms can rotate freely.

14 daily use

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 14

Adjusting the height of the upper basket

If washing very large plates you can load them in the lower basket after movingthe upper basket to the higher position.

To move to the higher positionproceed as follows:

1. Pull out the basket until it stops.2. Carefully lift both sides upwards

until the mechanism is engagedand the basket is stable.

To lower the basket to the originalposition proceed as follows:

1. Pull out the basket until it stops.2. Carefully lift both sides upwards

and then allow the mechanism todrop back down slowly, keepinghold of it.

Never lift or lower the basket onone side onlyWhen the upper basket is raisedyou will not be able to use the cupracks.

After loading your machine alwaysclose the door, as an open doorcan be a hazard.

Maximum height of the dishes in the lower basket

31 cmWith upper basket raised

27 cmWith upper basket lowered

20 cm

24 cm

upper basket lower basket

daily use 15

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 15

Use of detergent

Only use detergents specificallydesigned for use in dishwashers.Please observe the manufacturer’sdosing and storage recommendationsas stated on the detergent packaging.

Using no more than the correctamount of detergent contributes toreducing pollution.

Fill with detergent

1. Open the lid.

2. Fill the detergent dispenser (1)with detergent. The markingindicates the dosing levels:

20 = approximately 20 g ofdetergent30 = approximately 30 g ofdetergent

3. All programmes with prewash needan additional detergent dose (5/10g) that must be placed in theprewash detergent chamber (2).This detergent will take effectduring the prewash phase.

When using detergent tablets;place the tablet in compartment (1)

4. Close the lid and press until itlocks in place.

1

2

Detergent tabletsDetergent tablets from differentmanufactures dissolve at differentrates. For this reason, some detergenttablets do not attain their full cleaningpower during short washingprogrammes. Therefore, please uselong washing programmes whenusing detergent tablets, to ensure thecomplete removal of detergentresiduals.

16 daily use

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 16

Use of Tablets

These products are detergents with acombined cleaning, rinsing and saltfunctions. They can also containdifferent agents depending on thetablets you choose («3 in 1», «4 in 1»,«5 in 1» etc...).

1. Check whether these detergentsare suitable for your waterhardness. Follow themanufacturers instructions.

The refilling of the rinse aid dispenseris no longer necessary. In this casethe rinse aid indicator light will alwaysremain illuminated when the machineis switched on.

2. Before starting the washingprogramme put the multi functionstablet in the detergent dispenser.

If the drying results are notsatisfactory we suggest that you:

1. Fill up the rinse aid dispenser withrinse aid.

2. Set the rinse aid dosage toposition 2.

If you decide to turn back to theuse of standard detergent systemwe advise that you:1. Fill up the rinse aid dispenser

again.

2. Adjust the rinse aid dosage.

daily use 17

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 17

18 daily use

Select and start a washingprogramme

1. Check that the baskets have beenloaded correctly and that the sprayarms are free to rotate

2. Check that the water tap is opened

3. Close the dishwasher’s door.

4. Press the POWER button. ThePOWER light is on (setting mode).

5. Press the PROGRAM buttonrepeatedly to select a washingprogram (see "Washingprogrammes" chart): thecorresponding light illuminates andthe diplay shows the duration ofthe selected programme.

6. Set, if required, the "DELAY"function

After having selected the washingprogram, press the DELAY buttonuntil the flashing number of hoursfor the DELAY will appear in thedigital display. You can choosefrom 1 to 19 hours of delay.

With DELAY fuction activated:● The countdown starts

automatically. The number in thedisplay is no longer flashing butfixed with static light.

● The countdown will decrease withsteps of 1 hour.

● The opening of the door will notmodify or interrupt the countdown.

● Once the delay start has elapsedthe programme will startautomatically.

During the setting of the program theSTART light flashes:

7. Press the START button to startthe programme or the countdown.The START light remainsilluminated during the performanceof the program.The programme will startautomatically.

Interrupt or cancel a washingprogramme in progress ONLY if it’sabsolutely necessary.Attention! Hot steam may escapewhen the door is opened. Open thedoor carefully.

Interrupt a washing program inprogress:● Open the dishwasher door; the

program will stop. Close the door;the program will start from thepoint at which it was interrupted.

● Press the POWER button, all lightswill turn off. Press the POWERbutton again; the program will startfrom the point at which it wasinterrupted.

If desired, activate the Button LOCKfunction.

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 18

Cancel a delay start or a washingprogram in progress● Simultaneously press and hold the

two program buttons positionedover the word Cancel, until onlythe POWER light is on. Thewashing program has beencancelled.If a new washing program is to beselected, check that there isdetergent in the detergentdispenser.

End of the washing program● The dishwasher will automatically

stop.● The light of the program just ended

will remain on.● Zero appears in the digital display.1. Switch off the dishwasher by

pressing the POWER button.2. Open the dishwasher’s door, leave

it ajar and wait a few minutesbefore removing the dishes; in thisway they will be cooler and thedrying will be improved.

Unloading the dishwasher● Hot dishes are sensitive to knocks.

Dishes should therefore be allowedto cool down before removing fromthe appliance.

● Empty the lower basket first andthen the upper one; this will avoidwater dripping from the upperbasket onto the dishes in the lowerone.

● Water may appear on the sidesand the door of the dishwasher asthe stainless steel will eventuallybecome cooler than the dishes.

daily use 19

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 19

Washing programmes

Program

HEAVY70° Heavy soil

Crockery,cutlery, potsand pans

PrewashMain wash up to 70°C2 intermediate rinsesFinal rinseDrying

RINSE

Normal soilCrockery,cutlery, potsand pans

PrewashMain wash up to 65°C1 intermediate rinseFinal rinseDrying

Degree ofsoil

Type of load Program description

NORMALECO (2)

Normal soilCrockery andcutlery

PrewashMain wash up to 40°CFinal rinseDrying

FAST_3060° (1) Light soil Crockery and

cutleryMain wash up to 60°CFinal rinse

1 cold rinse (to avoid foodscraps from sticking together).This program does not requirethe use of detergent.

NORMAL65°

20 washing programmes

(1)Ideal for washing a partially loadeddishwasher. This is the perfect dailyprogram, made to meet the needs ofa family of 4 persons who only wish toload breakfast and dinner crockeryand cutley.

(2) The “NORMAL ECO” program isrecommended to wash a full 12 placesetting load of normally soiled dishes.It saves energy and water. Because itruns at a lower temperature, it is notsuitable for heavily soiled wash loads.To save energy, dry performance isreduced so you may have to open thedoor at the end of the wash cycle oreven towel dry some dishes.

Any. Partial load(to becompletedlater in theday).

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 20

Cleaning the filters

The filters must be checked andcleaned from time to time. Dirty filterswill degrade the washing result.

Before cleaning the filters ensurethat the machine is switched off.

1. Open the door, remove the lowerbasket.

2. The dishwasher filter systemcomprises a coarse filter (A), amicrofilter (B) and a flat filter.Unlock the filter system using thehandle on the microfilter, andremove.

3. Turn the handle about 1/4 a turnanticlockwise and remove.

Care and cleaning

4. Take hold of the coarse filter (A) bythe handle with the hole andremove from the microfilter (B).

5. Clean all filters thoroughly underrunning water.

6. Remove the flat filter from thebase of the washing compartmentand clean both faces thoroughly.

7. Put the flat filter back in the baseof the washing compartment andensure that it fits perfectly.

8. Place the coarse filter (A) in themicrofilter (B) and press together.

9. Put the filter combination in placeand lock by turning the handleclockwise to the stop. During thisprocess ensure that the flat filterdoes not protrude above the baseof the washing compartment.

NEVER use the dishwasher withoutfilters. Incorrect repositioning andfitting of the filters will producepoor washing results and mayresult in damage to the appliance.

care and cleaning 21

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 21

Prolonged periods of non-operation If you are not using the machine forany prolonged period of time you areadvised to:1. Unplug the appliance and then

turn off the water.2. Leave the door ajar to prevent the

formation of any unpleasantsmells.

3. Leave the inside of the machineclean.

Frost precautions Avoid placing the machine in alocation where the temperature isbelow 0°C. If this is unavoidable,empty the machine, close theappliance door, disconnect the waterinlet pipe and empty it.

Moving the machine If you have to move the machine(moving house etc....):1. Unplug it.2. Turn the water tap off.3. Remove the water inlet and

discharge hoses.4. Pull the machine out together with

the hoses.Avoid over tilting the machine duringtransportation.

NEVER try to remove the sprayarms.If soil residue has clogged the holesin the spray arms, remove them with atoothpick.

External cleaningClean the external surfaces of themachine and control panel with adamp soft cloth. If necessary use onlymild detergents. Never use abrasiveproducts, scouring pads or solvent(acetone, trichloroethylene etc....).Ensure that the seals around thedoor, the detergent and rinse aiddispensers are cleaned regularly witha damp cloth.We recommend every 3 months torun the wash program for heavysoiled dishes using detergent butwithout dishes.

22 care and cleaning

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 22

Something not working

The dishwasher will not start or stops during operation.Certain problems are due to lack of maintenance or oversights, which can besolved with the help of the indications described in the chart, without calling outa service technician.Switch off the dishwasher and carry out the following suggested correctiveactions.

Fault code Malfunction Possible cause Solution

● continuous flashingof the light of therunning program●

appears inthe digital display

The dishwasherdoes not fill withwater

● The water tap isblocked or restrictedwith limescale

● The water inlethose has not beencorrectly laid or itis bent orsquashed

● The filter (wherepresent) in thethreaded hosefitting at the waterinlet valve isblocked

● The water tap isturned off

● Check the waterinlet hoseconnection

● Turn the water tapon

● Clean the filter inthe threaded hose

● Clean the watertap

● continuous flashingof the light of therunning program

● appears inthe digital display

The dishwasher willnot drain

● The sink spigot isblocked

● The water drainhose has not beencorrectly laid or itis bent orsquashed

● Clean out the sinkspigot

● Check the waterdrain hoseconnection

● continuous flashingof the light of therunning program●

appears inthe digital display

Anti-flood device isactivated

● Close the watertap and contactyour localCustomer CareCentre.

23 care and cleaning care and cleaning 23

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 23

Fault code Malfunction Possible cause Solution

The programdoesnot start

● The dishwasherdoor has not beenproperly closed

● The main plug isnot plugged in

● Delay start hasbeen set

● The fuse hasblown out in thehousehold fusebox

● Close the door

● Replace the fuse

● Insert the mainplug

● If dishes are to bewashedimmediately,cancel the delaystart

Once these checks have been carriedout, switch on the appliance. Theprogram will continue from the point atwhich it was interrupted.If the malfunction or fault codereappears or for other fault codes notdescribed in the above chart, pleasecontact your Customer Care Centre,quoting the model (Mod.), productnumber (PNC) and serial number(S.N.).This information can be found on therating plate located on the side of thedishwasher door.

So that you always have thesenumbers at hand, we recommend younote them here:

Mod. :. . . . . . . . . . . . . . . . . . . . . . . . .

PNC : . . . . . . . . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . . . . . . . . .

24 something not working

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 24

If after all these checks, the problempersists, contact your local CustomerCare Centre.

The wash results are not satisfactory

The dishes are not clean ● The wrong washing program has been selected.

● The dishes are arranged in such a way as to stop waterreaching all parts of the surface. The baskets must notbe overloaded.

● The spray arms do not rotate freely due to incorrectarrangement of the load.

● The filters in the base of the washing compartment aredirty or incorrectly positioned.

● Too little or no detergent has been used.

● The drain hose connection is not correct.

The dishes are wet anddull

● Rinse aid was not used.

● The rinse aid dispenser is empty.

There are streaks, milkyspots or a bluish coatingon glasses and dishes

● Decrease rinse aid dosing.

Water drops have driedonto glasses and dishes

● Increase rinse aid dosing.

● The detergent may be the cause. Contact the detergentmanufacturer’s consumer care line.

something not working 25

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 25

Technical data

Dimensions Width 59,6 cm

82 cm

58,2 cm

Height

Depth

Water supply pressure Minimum 50 kPa (7 psi)

800 kPa (116 psi)Maximum cold water

Capacity 12 place settings

Max. weight 39 kg

Electrical connectionVoltage - Overall power -Fuse

Information on the electrical connection is givenon the rating plate on the inner edge of thedishwasher’s door

Subject to change without notice

350 kPa (51psi)Maximum hot water

26 technical data

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 26

Consumption values are intended asa guide and are dependant onpressure and water temperature,variations of power supply andamount of dishes.

Consumption values

Programduration

(in minutes)

Program Energyconsumption

(in kWh)

Waterconsumption

(in litres)

*HEAVY 70° 1,8 - 2,0 23 - 25

*NORMAL 65° 1,4 - 1,6 19 - 21

*FAST_30 60° 0,9 9

*NORMAL ECO (Test programmefor test institutes)

0,8 - 0,88 11 - 12

*Rinse 0,1 4

* The program duration is visible inthe digital display when thewashing program is selected.

technical data 27

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 27

Hints for test institutes

Full load: 12 standard place settings

Amount of detergent required: 10 g + 20 g (AS/NZS)

Rinse aid setting: position 4 (AS/NZS)

28 hints for test institutes

Testing in accordance with AS/NZS2007 must be carried out with theappliance fully loaded and using thetest program (see "Consumptionvalues").

The rinse aid dispenser must be filledand the door must be opened at theend of cycle for 30 minutes for dryingassessment.

Arrangement upper basket

Arrangement cutlerybasket

Cup racks: position A

1

1

1

1

11

1

1

1

1

1

1

2

2 222

2222222

3 3 3

3

3

33

3

3

3 3 3

44

4

4

4444

4

4

4 4

55

5

55555555

5

Arrangement lower basket

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 28

Any electrical and/or plumbingwork required to install thisappliance should be carried out bya qualified electrician and/orplumber or competent person.

Remove all packaging beforepositioning the machine.If possible, position the machine nextto a water tap and a drain.During all operations that involveaccessibility to internal componentsthe dishwasher has to be unplugged.When inserting the machine, ensurethat the water inlet hose, the drainhose and the supply cable are notkinked or squashed.

Installation

When the dishwasher is likely to beconnected to a solar hot watersystem, drip heater, or any othersupply where temperatures in excessof 60° are anticipated, a watertemperature tempering valve shouldbe installed. A pressure reducingvalve must be fitted if the hot watersupply pressure exceeds 350 kPa orthe cold supply pressure exceeds 800kPa.

The water inlet hose must not bekinked, crushed, or entangled when itis being connected.

The dishwasher features fill and drainhoses which can be turned either tothe left or the right to suit theinstallation by means of the locknut.

If the machine is connected to newpipes or pipes which have not beenused for a long time, you should runthe water for a few minutes beforeconnecting the inlet hose.

installation 29

Water supply connections

This dishwasher may be fed witheither hot (max. 60°) or cold water.However, a hot water supply is notalways efficient with very soiled crockeryas it shortens the washing programmesa lot. Therefore we recommendconnection to a cold water supply.

The water coupling nut fitted to themachine’s supply hose is designed toscrew onto a 3/4" BSP thread spout.

The water pressure must be within thelimits given in the "Technicalspecifications". Your local WaterAuthority will advise you on theaverage mains pressure in your area.

Always use a new hose-set whenconnecting the appliance to thewater mains. An old hose-set mustnot be reused. The inlet hoseshould be inspected every 12months for deterioration andreplaced if necessary.

This appliance has been fitted withsafety features which will prevent thewater used in the appliance fromreturning back into the drinking watersystem. This appliance complies withthe applicable plumbing regulations.

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 29

Electrical connection

Safety standards require theappliance to be earthed. Prior tousing the appliance for the firsttime, ensure that the rated voltageand type of supply on the ratingplate match that of the supplywhere the appliance is to beinstalled. The fuse rating is also tobe found on the rating plate.Always plug the mains plug into acorrectly installed approved socket.Multi-way plugs, connectors andextension cables must not be used.This could constitute a fire hazardthrough overheating.If necessary, have the domesticwiring system socket replaced. Ifthe electrical supply cord has to bereplaced, contact your localCustomer Care centre.The plug must be accessible afterthe appliance has been installed.Never unplug the appliance bypulling on the cable. Always pullthe plug.The manufacturer accepts noliability for failure to observe theabove safety precautions.

Our appliances are supplied with asecurity device to protect againstthe return of dirty water back intothe machine. If the spigot of your sink has a "noreturn valve" incorporated this canprevent the correct draining of yourdishwasher. We therefore adviseyou to remove it.

30 installation

Drain hose- Connect drain hose to the sink.

Secure it with the supplied hoseclamp.

- Required height: 30 to 100 cmabove bottom of the dishwasher.

- If you use a drain hose extensionthe total length should not be longerthan 4 metres. Likewise the internaldiameter of the couplings used forconnections to the waste outletmust be no smaller than thediameter of the hose provided.Ensure the hose is not bent orsquashed as this could prevent orslow down the discharge of water.

Likewise the internal diameter of thecouplings used for connections to thewaste outlet must be no smaller thanthe diameter of the hose provided.

When connecting the drain hose to anunder sink trap spigot, the entireplastic membrane must beremoved. Failure to remove all themembrane will result in food particlesbuilding up over time eventuallyblocking the dishwasher drain hosespigot.

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 30

Building-in

This dishwasher is designed to befitted either under a kitchen counter ora worksurface.It is essential that the recessdimensions indicated in the illustrationare followed.No further openings for venting of thedishwasher are required, but only tolet the water fill and drain hose andpower supply cable pass through.The height of the recess where thedishwasher is to be installed can varybetween 820 and 880 mm from thefloor since the dishwasher is fittedwith adjustable feet (max. 60 mm).Leave a space of 2 mm between thetop of the dishwasher and theunderside of the kitchen counter.

Adjusting the height of thedishwasherTo adjust the height proceed asfollows:1. Remove the adjustable plinth.2. Adjust the height of the two front

feet.3. Adjust the rear foot by turning the

screw in the middle of the frontkick plate to the left or to the right.

4. Replace the adjustable plinth.Good levelling is essential for correctclosure and sealing of the door. Whenthe appliance is correctly levelled, thedoor will not catch on the levellingspacers on either side of the cabinet.If the door does not close properly,loosen or tighten the adjustable feetuntil the machine is perfectly level.

Adjusting the height of the plinth

It is important for the dishwasher tobe absolutely horizontal so that thedoor seals properly.The adjustable feet are to be turnedto the left or right until the dishwasheris horizontal.If there is a space at the bottom of themachine,this can be covered bylowering the plinth.

building-in 31

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 31

32 building-in

Fitting the steam protectionFit the steam protection onto the frontpart of the worktop, using the screwsprovided.

Securing the dishwasher

1. Locate the angular brackets in theslots on the top of the dishwasher.

2. Adjust the height of the dishwasher.3. Secure the dishwasher in position

(upwards or sideways) by using thescrews supplied.Make sure the screws aretightened.

The dishwasher must besecured to the underside of theworktop or to adjacent units byusing the brackets supplied.Neglect to do this can cause injuryor damage.Under no circumstances may holesbe drilled through the sides of thedishwasher since this coulddamage the hydraulic components.

600 mm

Do not secure the bracketsupwards if the top of thedishwasher is not within 2mm ofthe underside of the worktop.

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 32

environment concerns 33

Packaging materialThe packaging materials includerecyclable items. The plasticcomponents are identified bymarkings, e.g. >PE<, >PS<, etc.Please dispose of the packagingmaterials in the appropriate containerat the community waste disposalfacilities.

When a unit is no longer being used:- Pull the plug out of the socket.- Cut off the cable and plug and

dispose of them.- Dispose of the door catch. This

prevents children from trappingthemselves inside andendangering their lives.

Environment concerns

Old applianceThis appliance should be handed overto the applicable collection point forrecycling. By ensuring this product isdisposed of correctly, you will helpprevent potential negativeconsequences for the environmentand human health, which couldotherwise be caused by inappropriatewaste handling of this product.For more detailed information aboutrecycling of this product, pleasecontact your local city office, yourhousehold waste disposal service orthe shop where you purchased theproduct.

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 33

Warranty

34 warranty

FOR SALES IN AUSTRALIA AND NEW ZEALANDThis document sets out the terms and conditions ofproduct warranties for Electrolux branded appliances.It is an important document. Please keep it with yourproof of purchase documents in a safe place for futurereference should you require service for yourElectrolux appliance.General Terms and Conditions1. In this warranty

(a) "Electrolux" means Electrolux Home Products Pty Ltd ABN 51 004 762 341 in respect of Appliances purchased in Australia and Electrolux (NZ) Limited in respect of Appliances purchased in New Zealand;(b) "Appliance" means any Electrolux product

purchased by you accompanied by this document;(c) "Warranty Period" means

(i) where you use the Appliance for personal, domestic or household purposes in Australia theperiod of 24 months and in New Zealand the period of 24 months;

(ii) where you use the Appliance for commercial purposes, in Australia the period of 3 months and in New Zealand the period of 3 months, (if the period stated is 0 months you are not covered by this product warranty) following the date of original purchase of the Appliance;

(d) "you" means the purchaser of the Appliance not having purchased the appliance for re-sale, and "your" has a corresponding meaning.

2. This warranty only applies to Appliances purchased and used in Australia or New Zealand and is in additionto (and does not exclude, restrict, or modify in any way) any non-excludable statutory warranties in Australia or New Zealand.

3. Electrolux warrants that, when dispatched from an Electrolux warehouse, the Appliance is free from defectsin materials and workmanship for the Warranty Period.

4. During the Warranty Period Electrolux or its Authorised Service Centre will, at no extra charge if your applianceis readily accessible without special equipment, and subject to these terms and conditions, repair or replaceany parts which it considers to be defective. You agree that any replaced Appliances or parts become the property of Electrolux. This warranty does not apply to light globes, batteries, filters or similar perishable parts.

5. Parts and Appliances not supplied by Electrolux are notcovered by this warranty.

6. Where you are within an Electrolux service area, this warranty covers the cost of transport of the Appliance to and from Authorised Service Centres of Electrolux and travelling costs for representatives of the Authorised Service Centre to and from your home or business. If you are outside an Electrolux service area,you will bear these costs. For information about whether you are within an Electrolux service area, please phone 13 13 49 in Australia, or 0800 10 66 10 in New Zealand.

7. Proof of purchase is required before you can make a claim under this warranty.

8. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship. Electrolux is not liable in the following situations (whichare not exhaustive):(a) The Appliance is damaged by:

(i) accident(ii) misuse or abuse, including failure to properly

maintain or service(iii) normal wear and tear(iv) power surges, electrical storm damage or

incorrect power supply(v) incomplete or improper installation(vi) incorrect, improper or inappropriate operation(vii) insect or vermin infestation.

(b) The Appliance is modified without authority from Electrolux in writing.

(c) The Appliance’s serial number or warranty seal hasbeen removed or defaced.

(d) The Appliance was serviced or repaired by anyone other than Electrolux or its Authorised Service Centres.

9. This warranty, the contract to which it relates and the relationship between you and Electrolux are governed by the law applicable in the Australian State where the Appliance was purchased or the law applicable in New Zealand if the Appliance was purchased in New Zealand. Where the Appliance was purchased in New Zealand for business purposes the Consumer Guarantee Act does not apply.

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 34

warranty 35

Limitation of Liability10. To the extent permitted by law:

(a) Electrolux excludes all warranties other than as contained in this document;

(b) Electrolux shall not be liable for any loss or damage whether direct or indirect or consequential arising from your purchase, use or non-use of the

Appliance.11. Provisions of the Trade Practices Act and State

consumer legislation in Australia, and the Consumer Guarantees Act, the Sale of Goods Act and the Fair Trading Act in New Zealand, imply warranties or conditions, or impose obligations, upon Electrolux which cannot be excluded, restricted or modified. To the extent permitted by law, the liability of Electrolux (if any) arising out of or in relation to the Appliance or any services supplied by Electrolux shall be limited (where it is fair and reasonable to do so):

(a) in the case of Appliances, at its option, to the replacement or repair of the Appliances or the supply of equivalent products or the payment of the cost of replacing the Appliances or having the Appliances repaired or of acquiring equivalent Appliances. Upon being replaced, parts and Appliances become the property of Electrolux; or

(b) in the case of services, at its option, to the supply of the services again or the payment of the cost of having the services re-supplied;

and in the case of Appliances or services supplied in NewZealand, loss or damage whether direct or indirect orconsequential that is reasonably foreseeable.

Privacy

You acknowledge that in the event that you make awarranty claim it will be necessary for Electrolux and itsAuthorised Service Centres to exchange information inrelation to you to enable Electrolux to meet its obligationsunder this warranty.

FOR SERVICEOR TO FIND THE ADDRESSOF YOUR NEAREST STATE

SERVICE CENTRE INAUSTRALIA

Please call 13 13 49For the cost of a local call

(Australia only)

FOR SPARE PARTSOR TO FIND THE ADDRESS OFYOUR NEAREST STATE SPAREPARTS CENTRE IN AUSTRALIA

Please call 13 13 50For the cost of a local call (Australia only)

SERVICE AUSTRALIAELECTROLUX HOME PRODUCTS

FOR SERVICE

OR TO FIND THE ADDRESS

OF YOUR NEAREST STATE

SERVICE CENTRE IN NEW

ZEALAND

Free call 0800 10 66 10

SERVICE NEW ZEALANDELECTROLUX HOME

PRODUCTS

FOR SPARE PARTSOR TO FIND THE ADDRESS OFYOUR NEAREST STATE SPARE

PARTS CENTRE IN NEW ZEALANDFree call 0800 10 66 20

Important NoticeBefore Calling a Service Technician please check carefully the operating instructions, service booklet and the warranty termsand conditions.

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 35

117 975 890 -02-06052008

www.electrolux.comwww.westinghouse.com.au

117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 36