Upruc TPA

UPRUC TPA S.R.L.FAGARAS - ROMANIA

UPRUC TPA S.R.L.FAGARAS - ROMANIA

505200 FAGARAS,ROMANIA, 1 NEGOIU ST.TEL.: +40-268-216126FAX : +40-268-211572www.upructpa.commail : [email protected]

T�P�A

S.R.L

www.upructpa.com

INDUSTRIAL VALVES

FLANGES

CENTRIFUGAL PUMPS

CASTINGS

MECHANICAL WORKINGS

01

02

03

GATE VALVESCHECK VALVESSTRAINERSBALL VALVESGLOBE VALVESCOATED DIAPHRAGM VALVESFLANGES

SINGLE HORIZONTAL STAGE PUMPSDOUBLE HORIZONTAL STAGE PUMPSSINGLE STAGE VERTICAL PUMPSMULTISTAGE VERTICAL PUMPS

CASTINGSCENTRIFUGAL CAST PIPESCAST BARSBALLSCAST PARTS made by ALLOY, MONEL, HASTELOY, DUPLEX

INDU

STRIAL

�VA

LVES

�CE

NTRIFU

GAL�

PUMPS

�CA

STIN

GS�

COLD BOX NO BAKE MACHINING DEPARTMENT

HOTTING FORMING MECHANICAL PROCESSING CNC

DYNAMIC AND STATIC CALIBRATION

MECHANICAL RESEARCH LABORATORY

CASTING

MECHANICAL PROCESSING

03 01

8 1

INDUSTRIAL�VALVES

VALVES

CENTRIFUGAL�CAST�PIPESCASTINGS

CASTINGS

IRON�CASTINGS

PUMPS

INDUSTRIAL�VALVES

APPLICATIONS

chemical and petrochemical industrynatural gas transportwater distribution systemfood processing industrypulp and paper industry

MATERIALS

Cast stainless steel, grade: GX5CrNi19.10-1.4308,according to EN 10213-1,4:1996, EN 10283:1999, ASTM A351-CF8, ASTM A351-CF8M, according to ASTM Cast carbon steel, grades: GP240GH-1.0619,according to EN 10213-1.2:1996, ASTM A216 WCB Rolled stainless steels: X6CrNiTi18.10-1.4541, X6CrNiMoTi17.12.2-14571, X20Cr13-1.4021, according to EN 10088-3:1995 Rolled carbon steels: 1C25,1C45 - EN 10083-2:1996 Sealings with PTFE, PP, PE, sticloplast.At the request of the client other materials can be used.

TESTS

1. Tests on raw materials and semi-products:Physical & chemical analysis, according Romanian, EN or ASTM Standards; Standard requirement; penetrant liquids (LP) tests; US and X-Ray Tests; corrosion tests againts various media. 2. Tests on Valves:Hydraulic and pneumatic strenght and tightness tests, as per EN 12266-1.2004 and ISO 5208; CFC or helium tightening tests requestThe Class 150/300 and Class 800 Ball Valves meetthe API 602D and BS 5351 Standards requirements.

TRANSPORTED FLUIDS

acid solutionsalkaline solutionswater, food productstoxic air: chlorine, hydrogen nitrideinflammable air: pit gas,liquefied-petroleum gasoxygen, COother fluids: carbon dioxide,freon air, nitrogen, argonsolvents chlorides

Steel�SphereT�P�A

S.R.L

www.upructpa.com

CAST BARSPUMPS PARTSCRUSHING SECTIONSCYLINDER COVERSGRATESBODIES OF VALVESDOSAGE BENDSBALLS

With following dimensionsMin: max diameter = 100 : 350 mmMin: max thickness = 10 : 25 mmMin: max lenght = 500 : 1700 mm

CENTRIFUGAL�CASTPIPES

01

Type Pressure Standard Sizes Working temp.

03

7

The castings from F-METAL S.R.L Fagaras are used for manufacturing the products in chemical andpetrochemical industry, food industry, heat- treatment and thermochemical section, wood industry,

pulp and paper industry and the maintenance of the railway materials.The compoziton of castings ensures a good resistance to erosion and corrision.

The main groups of products manufactures at F-METAL S.R.L. are:

Bodies and covers for Diesel engines and compressors, of lamelar cast iron;Castings of cast iron;Pumps cages and rotators of stainless steel;Dosages bends for petrochemical industry of stainless steel;Bodies and covers of stainless steel valves;Crushing section for wood industry of stainless steel;Gares for heat treatments of heat resisting steel;Centrifugal casted pipes of steel or cast iron from all markes elaborated at UPRUC TAP:Passivation electrodes of mirror iron for stainless steel tables;Holders for pipes pulling of heat resisting alloys or super alloys;Pieces of austenite manganese steel for maintenance of railway bed (slitters, screens, forks,chain links, tracks).Pieces of plain carbon steel;Pieces of low-alloy steelCylinder covers for compressors of ATSi10Mg.

CASTINGS

CASTINGS

GX12Cr12 - W.1.4011 - EN 10293GX42CrMo4 - W.1.7231 - EN 10293GX130CrSi29 - W.1.4777 - EN 10295

GX40CrSi13 - 1.4729 - EN 10295GX40CrSi29 - 1.4776 - - EN 10295

GX40CrNiSi25.12 - 1.4837 - - EN 10295GX40CrNiSi25.20 - 1.4848 - - EN 10295GX40NiCrSi38.18 - 1.4865 - - EN 10295GX40NiCrSi35.25 - 1.4857- - EN 10295

GX10NiCrNb32.20 - 1.4859 - - EN 10295GX15CrNi25.20 - 14840GX70CrMo29.2 - 1.4136

GP240GH - 1.0619 - EN 10213-2GX8CrNi13 - 1 - 1.4008 - EN 10283

GX20Cr14 - 1.4027 - SEW410GX10CrNi18.8 - 1.4312 -

GX4CrNi13.4 - 1.4317 - EN 10283GX5CrNi19.10 - 1.4308 - EN 10283

GX5CrNiMo19.11.2 - 1.4408 - EN 10283GX7NiCrMoCuNb25.20 - 1.4500

ASTM A 351 - CF8 ASTM A 351 - CF8M WCB A216HF A297

Hk40 A351Wc9 A217C5 A217

GX40CrNiSi27.4 - W.1.4823 EN 10295GX120Mn12 - W.1.3403 etc.

Heat resisting White Cast Iron EN 12513; NiHard; Fonte SilicioaseAll lamelar cast iron according to

SR ISO 1561-1999

MONEL, SUPER ALLOY with COBALT, SUPER ALLOY with NICHEL, HASTELOY B, HASTELOY C.

CAST IRON

ELABORATED AND CASTED ALLOYS

SPECIAL ALLOYS

Globe valve PN 25PN 40PN 64PN 100

EN 558-1:2000 20:30010:30010:150

10:300

-30ºC: +300ºC

-30ºC: +300ºC

-30ºC: +300ºC

-70ºC: +150ºCGlobe valve(for freezing agents)

Globe backshut of valves

Steel globe valve(with bellows)

PN 25PN 40

PN 16PN 25PN 40

PN 16PN 40

EN 13709EN 558-1 (F1)EN 12266-1EN 1092-1 EN 19EN 12516 EN 12570




15:125

10:100

-30ºC: +300ºCStrainer PN 25PN 40

20:100




-30ºC: +300ºCCheck valve PN 25 20:300

2

PN 25PN 40

15:150 -30°C: +150°CWafer steelball valve

-30°C: +150°CSteel ballvalve 3 way

PN 25PN 40

15:125

02

6

VERTICAL�SINGLE�STAGE

PCV - vertical centrifugal pumps( for clean corrosive liquids); ( for clean corrosive fluids, but having a freezing or crystallizing trend);PCVI - vertical centrifugal pumps

( for corrosive liquids containing suspension);PCVS - sludge vertical centrifugal pumps ( for fluids containing suspension whichPCVSI - sludge vertical centrifugal pumps with heating casings

have to be kept at a certain temperature value).

working temperature: -30°C...+ 200°Cmanufacturing range ( based on the lenght to the support flange), in mm: PCV, PCVI: 1400;1900;2400; 2900; 3400; 3900; 4400; 4900; 5400; PCVS, PCVSI: 1800; 2100; 2400; 2700; 3000.the pumps can run both in pools or vessels;allowed pressure in the vessel: PCV, PCVI light type: 6 bar, max;PCV, PCVI heavy type: 16 bar, max;PCVS, PCVSI: 0,7 BAR;the pumps can be used for the flow rate limits: Qmin=0.2 Qn and Qmax = 1.2 Qn;pressure in the heating casting: 10 bar; flange Pn16; Pn25 as per STAS; ENplane necked sealing surface ( B) or with channel ( on request) D as per EN 1092-1:2001.

VERTICAL�MULTISTAGE�PUMPS�TYPE�PA

PA - vertical multistage centrifugal pumps(sanked inwell, the motor in set on the well’s surface).

Driving mechanism: Diesel motor or electrical motor.The connection between the pump and the drivingmechanism, set on the well’s surface, is made with pipepieces with length 2500 ( mm)The number of stage and the number of pipe piecesis depending on the well’s depth ( water’s level in the well).

PA�PUMP

PUMPS�TESTS

THE�CALIBRATION�PROCESS

01

3

Type Pressure Standard Sizes Working temp.

-30°C: +150°C

-30°C: +150°C

Ball valve(with threaded ends)

Steel ball valvewith flanges*

PN 40Cls. 800

PN 25PN 40Cls. 150Cls. 300

10:250

3 1/ ":2 / "8 2

1 1/ ":2 / "2 21 1/ ":2 / "2 2

*Variants:-with threaded Th-end- with butt weld BW-end

-30°C: +150°CSteel ball valvewith pneumaticactuator

PN 25PN 40Cls. 150Cls. 300

PN 25PN 40Cls. 150Cls. 300

65:250

1 1/ ":2 / "2 2

1 1/ ":2 / "2 2

En19EN 13709

EN558-1(F1) EN 12266-1EN 12516EN1092-1EN 1257-0

En19EN 13709

EN558-1(F1) EN 12266-1EN 12516EN1092-1EN 1257-0

En19EN 13709

EN558-1(F1) EN 12266-1EN 12516EN1092-1EN 1257-0

Free flanges PN 10PN 16

Materials

W.1.4308W.1.4408W.1.4027

32:800

40:250

EN 1092-:2001

EN 10213-1,4:1996

Blind flanges PN 25PN 40

25:1000EN 1092-:2001

Materials 304/316/1.4308/1.4408

Plate flanges PN 10PN 16

32:500EN 1092-:2001

Materials 304/316/1.4308/1.4408


-20ºC: +80ºCActuators Max. 10 barr(supp. air press.)

4:2900 Nm

Sphere

02

4

CENTRIFUGAL�PUMPS

APPLICATIONS

chemical & petrochemical industriespharmaceutical industriesminingfood processing water treatmentirrigation system

SEALING

Static sealings:PTFE

Shaft sealings:soft, with PTFE nonasbestos cord:simple, mechanical, inside; inside,double, mechanical: outside, simplemechanical ( with bellow).The sealing room has such adesing as it allows the montage ofal mechanical sealings ( in front),balanced or not balanced,providing that the sealingsare, from the sizes point of view,similarly to those of DIN 24960.

TRANSPORTED FLUIDS

acid solutionsbasic solutionssuspensionssolventswater

MATERIALS

The pieces coming in direct contact with liquids are of:Stainless stell

- the materials used for castings are:GX5CrNi19-10 ( 1.4308)

GX5CrNiMo19-11-12 (1.4408)GX4NiCrCuMo30-20-4 (1.4527),

according to EN 10283:1998- the materials for rollings are:

X20Cr13 ( 1.4021),X6CrNiTi18.10 (1.4541),

X6CrNiMoTi17.12.2 (1.4571),according to EN 10088-3:1995

Plastic coatedPTFE FEP, PE or PP

Cast ironEN-GJL-200 or EN-GJL-250 according to SREN 1561/1999

Carbon SteelGP240GH(1.0619) according to EN 10213-1.2:1996

TESTS

Materials & Semi finished products:chemical composition, as per Romanian and EN Standards

Under pressure pieces:hydraulic tests and tightening tests at 1,5 x Pn ( bar).

Finished pumps:running and tightening tests;

running point vertically test H= f(QQ) andoverlapping on the general pumps curve.If the client asks so or it is agreed upon,

we can perform tests to estabilish:P=f( Q); H=f( Q); NPSH=f( Q).The above mentioned tests are

performed on the manufacturer’stesting stands.

WARRANTIES

The S.C. F-METALS.R.L Company warrants the pumpsfor a 12 months running, but notmore then 14 months

from delivery, providing the client will respect the mounting,putting into operation and maintenance instructions, witch

are given on dispatch. For cases where corrosion anderosion are problems, the supplier and the purchaser

have to agree upon other warranty periods.For the best choice of a pump, the purchaser is compelledto answer the question submitted by the supplier in the

Technical Data Sheet under specification:TO BE ANSWERED BY THE PURCHASER.

02

5

THE PRODUCTS ARE ASSIMILATED IN COLLABORATION WITHPOLYTECHNIC INSTITUTE AND RESEARCH INSTITUTE FORHYDRAZLIC MACHINES TIMISOARA

HORIZONTAL�SINGLE�STAGE

PCN - normal centrifugal pumps ( for clean corrosive liquids); ( for clean corrosive liquids but having crystallizationPCNI - normal centrifugal pumps with heating casing

andfreezing trend); ( for corrosive liquids which contains suspensions) .PCNS - normal centrifugal sludge pumps

- suspensions content: 30%, max;- suspensions sizes: 12-20 mm, max.

( for loaded corrosive liquids, but which need PCNSI - normal centrifugal sludge pumps with heating casingto be kept at a certain temperature).- suspension content: 30%, max.;- suspension sizes: 12-20 mm, max.

( for cleanvery corrosive liquids, for placesPCNST - plastic coated normal centrifugal pumps with open rotorwhere stainless steel doesn’t resist).

working temperature -20°C to + 200°Cworking pressure: 16 bar at 200°C, max.;pressure in the heating casing: 10 bar;flow rates Qmin = 0,2 Qn and Qmax = 1,2 Qn;flanges PN 16, as per EN 1092-1:2001.

HORIZONTAL�DOUBLE�STAGE

PC2N - normal double stage centrifugal pumps ( for clean corrosive fluids).

PCN�PUMP

PCNS�PUMP

PC2N�PUMP

the pressure in the pump at 120°C working temperature is of 25 bar, max.the pumps can be used for the flow rate limits: Qmin = 0,2 Qn; Qmax = 1,2 Qnplane necked sealing surface ( B) or with channel ( on request) ( D), as per EN 1092-1:2001flange PN 25, as per EN 1092-1:2001

Documents

Upruc TPA