124 West Street, ALFORD 01507 621111

Email: auctions@willsons-property.co.uk

www.willsons-property.co.uk

----------- VIEWING ----------- Friday 27th September 2019, 12 noon - 5pm & from 8am on the sale day

Viewing & Sale Day Mobile: 07796 961158 Toilets & Caterers in Attendance

Dispersal Sale by Auction On

Saturday 28th September 2019, 10:00am At

Manor Farm, Beesby Road (A1104), Maltby Le Marsh, Alford, Lincs, LN13 0JJ

Of

Tractors, Trailers, 360° Excavator, Large quantity of Workshop

Equipment, Tools and Parts, 2 x Telephone Boxes, Reclaim

bricks, capping, cast iron pillars and RSJ’s. Also Lathes, Drills,

machine parts, metal blank & offcuts.

Upon the joint instructions of Mr R White & Mr B Hutchinson

(Alford Engineering)

On Behalf of Mr R White

Machinery & Vehicles: 1995 Liebherr 16 ton 900 Litronic 360 degrees with extra hydraulics for weed cutting, Serial No. 3683012,

ex LMDB complete with weeding basket, 2 dykeing buckets and 1 digger buckets – done 8,090 hours; 1993 John Deere 3650 4

wheel drive tractor K964 SFE with front weights – 116 hp, 6 cylinder turbo, done 10,580 hours, side step and it has an SG2 cab;

2006 AS Marsden, Ace 12 ton, twin axle, mono bodied grain trailer with sprung drawbar, hydraulic rear door and grain chute on

flotation tyres, with a rollover sheet, in good condition with heavy duty axles; 2002 Isuzu Trooper FX52 UGG 3 litre diesel turbo, no

MOT, engine management problem. Sold as seen. MOT exp 13-11-2018 on SORN, done 106,08 miles on 13-11-2017; 6m

hydraulic folding Marskstig harrow drag; Rear mounted, drain jetter; Flat 28’ single axle with bogey on super singles bale trailer; 30’

container with roller shutter back door on single axle; Erde 102 car trailer;

Workshop Equipment & Tools: Large Britool HVT Model 5000 large ¾” torque wrench used for tractor back wheels; Shafts for

spades and axes; 4 x heavy duty axle stands; 3 x cart jacks; 3 x small axle stands; 2 posthole rammers; Large quantity of tow ropes,

tow wire ropes and tow chains, shackles, and lifting chains; Chains for strapping down on low loaders; Large double extending

aluminium ladders; 7 x G-clamps; Large set of bolt croppers; Gun with chisels; 2 x spirit levels; Rivet gun; 3 x bottle jacks; Large &

small bearing puller; Small air grinder; Sykes Picavent coolant system pressure tester; Air nibbler tool for splitting off track rod ends;

Tester for testing hydraulics; Soldering kit and nozzles; Ackretorque model L3 torque wrench tester; Samson guillotine; Hydraulic

press kit; Various pick axe heads; Air grease gun; Large quantity of various drill bits; Oxy Acetylene trolley; 2 x roller tables; Large

anvil; Swage block and stand; 3 x axle stands; 20 ton trolley jack; Hydraulic heavy duty engine hoist; Waste oil dispenser; Honda 5

hp water pump; 2 x IBC’s; Flume eliminator; Hydraulic pipe bending kit; JD 5000 T 5 kw silent run diesel generator; Wesley single

phase pressure washer; Workshop hand operated hydraulic forklift; Heavy duty running barrow; Hydraulic pallet trolley; 3 kw diesel

generator; Harvest automatic constant humidity controller; Shot blast cabinet; Quantity of gantry galvanised platform; Large quantity

of pallet racking; Manual lifting frame pedestal; Insulated Chemical Store, 8’ x 14’ with infrastructure for lighting and heater tube;

Free standing water tanks used for spraying water; 2 x spray COSHH cabinets; Diesel engined cement mixer; Metal pipe bender on

stand;

Workshop Power Tools: Bosch twin 18 volt battery drill set with charger and bits; Hitachi electric drill; Bench mounted pedestal

grinder; Makita twin two-piece drill and fix kit, 18 volt, MXT; Bosch Jigsaw; Bosch 9” angle grinder; Sealy battery powered grease

gun; Makita heavy duty electric drill; Ingersoll Rand BOC Magnetic .profile cutter; Freestanding M Bottero & Co pedestal twin 3-

phase grinder; Wooden workshop bench with vice and small pedestal grinder; Makita 4” angle grinder; Forte 3-phase metal

bandsaw; Quasri-arc 3-phase heavy duty welder on wheels; Asquith radial arm drill; Superior free standing 3-phase heavy duty

pedestal grinder; Archdale 3-phase free standing radial arm drill; English Electric 3-phase electric welder on trolley; Easab heavy

duty mig welder; Churchill hydraulic free-standing press; Stihl PS350 disc-cutting saw;

Workshop parts & Ancillaries: Contents of workshop stores including: nuts, bolts, washers, UNC, UNF metric coach bolts, jubilee

clips, split-pins various sizes, pipe clamp, threaded bar, wing balls, fixing balls, drawbar pins, implement pins, pipe fittings, pto

fittings, nuts and bolt packs, washer packs, bulbs, wire, battery leads, filters, electrical fittings, fastenings, rivets various sizes, jump

leads, grease guns, tractor sealant tyre OKO pump; Plumbing fittings, ball valves, plastic plumbing fittings; Quantity of electrical

wire; R2T hydraulic pipe and fittings; Large quantity of gas welding rods; 3 x rolls of mig welding wire; Tips and fittings for mig

welder; Leather welding apron; Band saw spare blades; Various air tools, including ratchets, drills, grinders, spray guns, air chisel; 2

x impact sockets for airgun; Grinding discs; Box of disc cutters; 4 x 12” diamond disc cutters; Box of wire brushes and files; Box of

washer kits including fibre washers, copper washers; Rack of nails, various sizes; Staples; Various quantities of oils – engine oil,

hydraulic oil, transmission oil and greases;

Chainsaws & Strimmers: Stihl 042 AV chain saw; Dolmar 113 chain saw; Stihl 020 AVP small chain saw; Macallister petrol

strimmer; Macallister petrol hedge trimmer;

Grain Items & Bird Scarers: 2 x Sinar grain spears; Grain Master Protimeter, grain tester; Macallister grain store workshop hoover;

Kit to check specific weight of grain; Multimeter; Boxed micrometer; M & W Depth gauge; M & W Exterior gauge; Boxed depth

gauge; Vernier gauge boxed; 15 x Portec scatterburg bird scarers – mainly Mark 3’s mostly with batteries in working order; A

quantity of Scarem Black Hawk Kites;

Reclaim Items: 3’6” x 2’ sandstone trough; Pair of 58” wide x 5’3” high – wrought iron ornate gates; Georgian fireplace from Manor

House; Pair of cast iron bench ends; Small garden roll; Cast iron roll top bath; 3 x cast iron gates – 1 x pair and 1 x single; Large

pallet containing sandstone slabs; 60 x railway sleepers; 40 x 7’ x 3’ timbers; 5 x sandstone caps; Various pallets of re-claim bricks;

3 x pallets of Westmoreland roof slates; 6 x composite grip ends; Quantity of concrete grip ends; Sandstone caps; 7 x 4 stone

weights; 10 x cast iron pillars, 6’6” long; Pair of cast iron bench ends; 8 x steel channels and RSJ’s; Large quantity of heavy duty

steel girders;Depth wheel brackets; Pallet of jockey wheels and axles; Critoil grain walling and frames; 6 x grain walling sections;

Large quantity of galvanised sectional grain walling; 4 x possibly Victorian, copper light fitments;

Misc: Large quantity of books and manuals; Quantity of farm signs; Cable ties; 2 x industrial air conditioning units; Measuring

wheel; Radcom 2-way radio system including handsets and base station aerial; Set of Salter scales; Gerry cans; Box of gate

tighteners; 4 x lights; Various fire extinguishers; Knee hole office desk; Draughtsman’s table; 4-drawer filing cabinet; 2 x King

George V telephone box; Ex Alford Market cattle weigher; Cross trainer machine; Life Fitness treadmill; Universal stepping machine;

Large heap of fire-wood timber; Quantity of cinema seats from the Lyric at Mablethorpe; Passat domestic wood burner; Shell motor

spirit fuel can with brass cap; Esso Paraffin tin; Pratts fuel can with nozzle; 2 x Castrol Motor Oil glass bottles with no oil in them;

On behalf of Brian Hutchinson of Alford Engineering (non VAT items)

Engineering Machinery (all 3 phase unless stated): Free standing double ended polishing machine – Viceroy; Free standing double

ended grinder – embossed - NI Made in England; Trim tool; Adcock & Shipley, Leicester, free standing radial drill model 650-350;

Ward 3a free standing, Collet Lathe; Capstan Lathe, can be converted to a chuck lathe, c/w box of collets; Ward 3a free standing,

Capstan Lathe with chuck; Ward 3a Capstan Bar Lathe, c/w bar feed; Dronsfields free standing surface grinder, hand operated;

Archdale free standing horizontal milling machine c/w box of cutters; Excel free standing surface grinding machine, swing type, c/w

magnetic surface plate; Adcock & Shipley, double pillar free standing drill, 3 Morse taper; Cast iron wood planing machine; Eddings

bench mounted bench drill; Corona bench mounted filler drill; Freestanding bench grinder; Corona Freestanding pillar drill;

Meddings Freestanding pillar drill;

Workshop Equipment: Marking off table, metal, size 4’ x 3’; 5 x machine vices - 3 large, 2 small – 1 is an AB Wood; Magnetic table;

Small bench mounted guillotine; 6” vice on pedestal stand; Oxy Acetylene metal spray kit with powders – Stubbs brand; Small anvil

and anvil stand; 2 x small boxes drills and reamers; Pipe bending machine; Box large drills and reamers; Complete pipe threading

machine, c/w dies - hand operated; Freestanding set of scales to weigh up to 50kg with sticker on Trent Scales Nottingham;

Blanks & Offcuts & Parts: 3 large crates mainly scrap material including mainly off-cut, old jigs, bars chucks; Small crate including

gauges, thread gauges, jigs, etc; Pallet bar and blanks; Pallet small blanks; 2 x boxes gauges, plug gauges and exterior gauges; 4 x

height gauges; 2 x boxes bearings, some new some second-hand; 2 x dividing heads; 12 x 3 and 4-jaw chucks; 2 x boxes v pulleys;

4 x boxes grinding wheels; Box small drill bits; 12 x Coventry-style die boxes for cutting threads; Quantity of steel racks and

miscellaneous steel; 5 full pallets of bar and metal offcuts; Pallet of miscellaneous machine tool parts;

By Kind Permission: Knight mounted laser sprayer 24m 1999 4 section shut off boom recirculation tested October 2018;

Forthcoming Auction: Furniture & Effects - Wednesday 6th November at Well

ESTATE AGENTS I RENTALS I AGRICULTURAL I AUCTIONEERS I VALUERS

www.willsons-property.co.uk

16 Algitha Road, SKEGNESS, PE25 2AG

Telephone 01754 896100

skegness@willsons-property.co.uk

124 West Street, ALFORD, LN13 9DR

Telephone 01507 621111

alford@willsons-property.co.uk

CONDITIONS OF SALE Please read before bidding BUYERS PREMIUM: In accordance with the custom in Lincolnshire

commission will be charged in addition to the purchase price at 5% plus VAT @ 20%. Principal VAT @ 20% will also be charged on all

items unless announced at the time of sale. PAYMENT OF ACCOUNTS: Payment for all lots purchased must be made in full on day

of sale & methods are: Cash - To a maximum of 10,000 Euros. Cheque - Cheques must be supported by a letter of reference from

your bank or a cheque guarantee card covering the sum of your purchase. Card –Debit Card Only Banker's Draft - It is the

responsibility of the purchaser to make prior arrangements regarding method of payment before attending the auction. For persons

unknown to the Auctioneers, their lots will be impounded until the Auctioneers have cleared funds. BIDDING: At the fall of the

hammer the highest bidder shall be the purchaser but if a dispute arises as to the identity of the highest bidder the Auctioneers will

confirm the identity of the highest bidder or the lot will be put up again and resold. No person will be allowed to retract their bid

once accepted by the Auctioneers but the Auctioneers reserve the right to refuse the bid from any person without giving reason.

DISPUTES: In the event of a dispute between Vendor & Purchaser the matter can be referred to the Auctioneers whose decision is

final & binding on both parties. COMMISSION BIDS: The Auctioneers will be pleased to execute commission bids upon receipt of full

written instructions but will not be liable for any errors or omissions. RESERVED PRICES: The majority of the lots are unreserved

and will be sold to the highest bidder. The Auctioneers reserve the right to use their own discretion, acting in the interest of the

Vendor, for any lot to bid on behalf of the Vendor and even withdraw a lot if the Auctioneers so decide. BUYERS NUMBERS: All

successful bidders must show their buyer’s number at the fall of the hammer. Buyer’s numbers are obtainable by registering with

the Auctioneers on the morning of sale. CATALOGUES DESCRIPTIONS, LOTTING & ESTIMATES: Whilst every care has been taken in

describing the lots in the catalogue, these descriptions must not be regarded upon as fact. Intended Purchasers are strongly

advised to inspect and check on the availability of any particular lot upon which they intend to bid as the Auctioneers act as agent

only and do not have personal knowledge of the item. All lots are un-tested, without warranties or guarantees as to serviceability,

working order/hours or fit for purpose and are sold "as seen" unless otherwise stated. Any estimates provided are for guidance

purposes only. The Auctioneers reserve the right to vary the order of sale, combine or divide or withdraw any lot and to generally

conduct the auction as they so decide at the time. RESPONSIBILTY OF LOTS: No lot will become the property of the Purchaser or

may be removed from the premises until it has been paid for in full. However, at the fall of the hammer, each lot will be at the sole

risk and expense of the Purchaser and the Auctioneers will not be responsible for any damage or loss that occurs due to fire, theft,

accident or otherwise. With any vehicle or trailer purchased from the auction, the Purchaser is responsible for complying with all

legal requirements including road worthiness of the lot and for ensuring its removal from the premises in a safe manner. A

purchaser must not attempt to disconnect any fixed electrical item without first obtaining confirmation from the Auctioneers that

the mains supply has been turned off. The Purchaser is responsible for and must indemnify the Auctioneers and owner of the sale

premises against any damage caused to buildings or property or any other lots at the auction. Any lot which has been sold but not

removed by the Purchaser within the required time may be removed by the Auctioneers and the Purchaser will be responsible for

any cost of removal and storage. REMOVAL & LOADING AWAY: Sold lots may only be collected and removed by the purchaser upon

the presentation of a receipted invoice. Loading away facilities will be available on the day of the sale and subject to arrangement

for the following seven days. Items strictly to be removed within 7 days of the Auction Sale. HEALTH & SAFETY: Health and Safety –

You are responsible for your own safety and enter the sale premises at your own risk. To help the Auctioneers protect your safety

whilst on the sale premises, please:- • Keep your driving speed to a minimum and park in the designated areas. • Do not allow

children to wander off on their own or climb on any of the lots. • Take care around items which are trip hazards or slippery and

avoid any vehicle in operation. • Only stay within the areas of the premises being used by the Auctioneers. • Refrain from smoking

in the vicinity of the auction or near any potential fire hazard.

‘To the Sale’ signs will be erected on sale day

from the Five Sail Windmill in Alford