Uploads_downloads_Hand Embroiderer, OSS, L-1

1

JOB SPECIFICATION AND

SKILL TEST

JOB TITLE : Hand Embroiderer, L - 1

SECTOR : Garment Making

SUB - SECTOR : Embroidery

COUNCIL FOR TECHNICAL EDUCATION AND VOCATIONAL TRAINING

NATIONAL SKILL TESTING BOARD

MADHYAPURTHIMI, BHAKTAPUR

August, 2007

2

The National Skill Standards was developed by:

S.N. Name Organization Designation 1 Ms. Renu Shrestha Reader, Sanothimi Campus, Sanothimi, Bhaktapur Coordinator

2 Mr. Chandra Bhakta Nakarmi Director, National Skill Testing Board, CTEVT Member

3 Ms. Antu Shrestha Fashion Designer/Instructor, Designer House, Kathmandu Member

4 Ms. Bhawani Devi Nakarmi Upadhya

Chief Instructor, Cottage and Small Industries Training Center, Tripureswor, Kathmandu

Member

5 Ms. Sangeeta Shahi (Lama) Proprietor, Shiksha Training Center ,Swayambhu, Kathmandu Member

6 Ms. Sharmila Ghale Instructor, Land Star Construction, Kirtipur, Kathmandu Member

7 Mr. Raja Ram Bhuju Skill Testing Assistant, NSTB/CTEVT Member

8 Mr. Gunananda Jha Skill Testing Officer, NSTB/CTEVT Member

9 Mr. Chhabi Bahadur Gurung Deputy Director , NSTB/CTEVT Member-Secretary

Recommended by the Garment Making Technical Sub Committee

Sponsored by F-SKILL Pvt. Ltd., Lalitpur

3

JOB SPECIFICATION

1

JOB TITLE: Hand Embroiderer LEVEL: 1

2

JOB DESCRIPTION: A Hand Embroiderer L – 1, performs tracing pattern, prepares frames/rings, performs chain/ Marken/ loading stitches, and perform patch/ French-knot/ sitara/ beads/ stones/ mirrors works.

3 LIST OF TASK:

1. Tracing patterns.

2. Preparing frames/rings.

3. Performing chain stitches.

4. Performing Marken stitches.

5. Performing loading stitches.

6. Performing patch-works.

7. Performing French-knot-works.

8. Performing Sitara-works.

9. Performing Bead-works.

10. Performing stone-works.

11. Performing mirror-works.

4

QUALIFYING NOTES (Entry Requirements, etc.) - Normal health, physically challenged person, (without leg) can also participate. - Educational requirements: able to read and write Nepali. - As per NSTB rule and registration.

4

TASK SPECIFICATION

5

TASK TITLE: Tracing Patterns. JOB TITLE: Hand Embroiderer, L - 1 TASK NO: 1

6

TASK ELEMENTS 1.1 Selects position for tracing. 1.2 Selects patterns. 1.3 Selects required tools and materials. 1.4 Pins patterns. 1.5 Prepares safeda paste. 1.6 Lays fabric over plain surface. 1.7 Traces patterns. 1.8 Dries fabrics.

5

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Micro tip pen/ Pencil, Pin / Tracing wheel, Bowl, Iron, Embroidery catalogue, and Measuring tape. Materials: Tracing paper, Neer powder, Safeda, Kerosene, Cotton, Wool, Carbon paper, and Chalk.

8

TASK PERFORMANCE STANDARDS

• Appropriate tracing position Selected. • Patterns selected as per space and use. • Appropriate materials and tools selected. • Patterns pined in even distance and uniform hole size. • Safeda prepared with appropriate combination of kerosene and safeda powder matching the color of fabric. • Fabrics laid stretching over plain, hard and dry surfaces. • Patterns traced without deviation. • Fabrics dried properly.

6

9

10

TASK TRAINING DATA

TASK No. T.E. No. TECHNICAL KNOWLEDGE APPLIED CALCULATION

GRAPHIC INLFORMATION

SAFETY AND HYGIENE

1

1.

2.

3.

4.

Knowledge of selecting patterns according to space of fabric and it’s use. Knowledge of preparing safeda paste (ratio of kerosene and safeda) and color of safeda. Knowledge of drying fabrics. Knowledge of measurement (length, breadth).

Knowledge of performing simple mathematical calculations.

• Knowledge of consequence of allergic effect while preparing safeda.

• Knowledge of consequence of tetanus from pin prick.

7

TASK PERFORMANCE TEST (SKILL ASSESSMENT)

11

TASK TITLE: Tracing patterns. TASK NO: 1

LOCATION OF TEST: CANDIDATE'S NAME: EVALUATOR'S NAME:

12 TEST FACTORS AND ITEMS STANDARD MET STANDARD NOT MET (COMMENT)

DID THE CANDIDATE?

1. Select appropriate tracing position. 2. Select patterns as per space and use. 3. Select appropriate materials and tools. 4. Pin patterns in even distance and uniform hole size. 5. Prepare Safeda with appropriate combination of kerosene and safeda

powder matching the color of fabric. 6. Lay fabrics stretching over plain, hard and dry surfaces. 7. Trace patterns without deviation. 8. Dry fabrics properly.

8

TASK SPECIFICATION

5

TASK TITLE: Preparing frames/rings. JOB TITLE: Hand Embroiderer L - 1 TASK NO: 2

6

TASK ELEMENTS

2.1 Selects the size of patterns. 2.2 Selects required tools and materials. 2.3 Selects the size of frames/rings. 2.4 Winds the cloth all over the frames/rings. 2.5 Lays fabric over the frames/rings. 2.6 Fasten the frames/rings.

9

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Frame/ring, Needles, and Scissors. Materials: Fabrics, and Threads.

8


• Appropriate size and type of patterns selected. • Appropriate tools and materials selected. • Appropriate size of frames/rings selected. • Cloth wound properly all over the frames/rings. • Fabric laid stretching over the frames/rings. • Frames/rings firmly fastened.

10

9

10

TASK TRAINING DATA

TASK No. T.E. No.

TECHNICAL KNOWLEDGE APPLIED CALCULATION


SAFETY AND HYGIENE

2

1.

2.

3.

4.

Knowledge of selecting size of patterns according to size of fabric and it’s use. Knowledge of selecting proper size of rings/frames according to size of patterns. Knowledge of importance of winding the cloth all over the ring and winding procedure. Knowledge of laying fabric over the frames/rings.

11


11 TASK TITLE: Preparing frames/rings. TASK NO: 2



DID THE CANDIDATE?

1. Select appropriate size and type of patterns. 2. Select appropriate tools and materials. 3. Select appropriate size of rings/frames. 4. Wind cloth properly all over the frames/rings. 5. Lay fabric stretching over the frames/rings. 6. Fasten frames/rings firmly.

12

TASK SPECIFICATION

5

TASK TITLE: Performing chain stitches. JOB TITLE: Hand Embroiderer L - 1 TASK NO: 3

6

TASK ELEMENTS

3.1 Selects color and type of threads. 3.2 Selects required tools and materials. 3.3 Sets needles. 3.4 Performs chain stitches. 3.5 Ends stitches properly. 3.6 Cuts excess threads. 3.7 Irons finished products.

13

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Frame/ring, Scissors, Irons, and Needles. Materials: Different color and types of Threads, and Fabrics.

8


• Proper color and type of threads selected.

• Appropriate tools and materials selected.

• Proper type and size of needles selected.

• Needles properly set.

• Chain stitches properly performed.

• Stitches locked properly.

• Excess threads properly cut.

• Finished product properly ironed.

14

9

10

TASK TRAINING DATA

TASK No. T.E. No.



SAFETY AND HYGIENE

3

1.

2.

3.

4.

Knowledge of color combination between threads and fabrics. Knowledge of different types and quality of threads. Knowledge of different types of needle used for chain stitches, importance of winding around needles and procedures. Knowledge of chain stitching (locking during start and end, balancing hand and needle, removing unwanted threads).

15


11 TASK TITLE: Performing chain stitches. TASK NO: 3



DID THE CANDIDATE?

1. Select proper color and type of threads.

2. Select appropriate tools and materials.

3. Select proper type and size of needles.

4. Set needles properly.

5. Perform chain stitches properly.

6. Lock stitches properly.

7. Cut excess threads properly.

8. Iron finished product properly.

16

TASK SPECIFICATION

5

TASK TITLE: Performing Marken stitches. JOB TITLE: Hand Embroiderer L - 1 TASK NO: 4

6

TASK ELEMENTS

4.1 Selects color and type of threads. 4.2 Selects required tools and materials. 4.3 Selects needles. 4.4 Sets needles. 4.5 Performs Marken stitches. 4.6 Ends stitches properly. 4.7 Cuts excess threads. 4.8 Irons on finished products.

17

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Frames/rings, Scissors, Irons, and Needles. Materials: Different color and types of Threads, and Fabrics.

8




• Proper types and size of needles selected.


• Marken stitches properly performed.




18

9

10

TASK TRAINING DATA

TASK No. T.E. No.



SAFETY AND HYGIENE

4

1.

Knowledge of chain stitching (locking during start and end, balancing hand and needle, removing unwanted threads).

19


11

TASK TITLE: Performing Marken stitches. TASK NO: 4



DID THE CANDIDATE?



3. Select proper types and size of needles.


5. Perform Marken stitches properly.



8. Iron finished product properly.

20

TASK SPECIFICATION

5

TASK TITLE: Performing loading stitches. JOB TITLE: Hand Embroiderer L - 1 TASK NO: 5

6

TASK ELEMENTS

5.1 Selects color and type of threads. 5.2 Selects required tools and materials. 5.3 Selects needles. 5.4 Sets needles. 5.5 Performs loading stitches. 5.6 Ends stitches properly. 5.7 Cuts excess threads. 5.8 Irons finished products.

21

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Frames/rings, Scissors, Iron, and Needles. Materials: Different color and types of Threads, and Fabrics.

8






• Loading stitches properly performed.




22

9

10

TASK TRAINING DATA

TASK No. T.E. No.



SAFETY AND HYGIENE

5

1.

Knowledge of loading stitching (locking during start and end, balancing hand and needle, removing unwanted threads).

23


11

TASK TITLE: Performing loading stitching. TASK NO: 5



DID THE CANDIDATE?





5. Perform Loading stitches properly.



8. Irons finished product properly.

24

TASK SPECIFICATION

5

TASK TITLE: Performing patch-works. JOB TITLE: Hand Embroiderer L - 1 TASK NO: 6

6

TASK ELEMENTS

6.1 Selects patching positions.

6.2 Selects patterns.

6.3 Selects required tools and materials.

6.4 Marks patching positions.

6.5 Prepares patch pieces.

6.6 Iron patch pieces.

6.7 Lays patch pieces.

6.8 Select type and color of threads.

6.9 Select needles.

6.10 Sets needles.

6.11 Sews patch pieces.

6.12 Ends stitches properly.

6.13 Irons on finished products.

25

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Frames/rings, Scissors, Needles, Measuring tape, and Embroidery catalogue. Materials: Different color and types of Threads, Fabrics, Chalk and Patch pieces.

8


• Appropriate patching positions selected.

• Appropriate pattern selected.

• Appropriated tools and materials selected.

• Patching positions properly marked.

• Patch pieces prepared appropriately.

• Patch pieces laid properly.

• Proper type and color of thread selected.

• Proper type and size of needles selected.


• Patch pieces properly sewed.




26

9

10

TASK TRAINING DATA

TASK No. T.E. No.



SAFETY AND HYGIENE

6

1.

2.

Knowledge of patching (positioning, marking, ironing, preparing patching pieces, and procedures). Knowledge of selecting patches pattern according to space of fabric and it’s use.

Knowledge of consequences of tetanus from needle.

27


11

TASK TITLE: Performing patch works. TASK NO: 6



DID THE CANDIDATE?

1. Select appropriate patching positions.

2. Select appropriate patterns.

3. Select appropriated tools and materials.

4. Mark patching positions properly.

5. Prepare patch pieces appropriately.

6. Lay patch pieces properly.

7. Select proper type and color of threads.

8. Select proper type and size of needles.


10. Sew patch pieces properly.



13. Iron finished products properly.

28

TASK SPECIFICATION

5

TASK TITLE: Performing French-knot-works. JOB TITLE: Hand Embroiderer L - 1 TASK NO: 7

6

TASK ELEMENTS 7.1 Selects color and type of threads. 7.2 Selects required tools and materials. 7.3 Selects needles. 7.4 Sets needles. 7.5 Performs French-knots. Ends stitches properly. Cuts excess threads.

Irons finished products.

29

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Frames/rings, Scissors, Irons, and Needles. Materials: Different color and types of Threads, and Fabrics.

8






• French-knots properly performed.



• Finished products properly ironed.

30

9

10

TASK TRAINING DATA

TASK No. T.E. No.



SAFETY AND HYGIENE

7

1.

Knowledge of French-knots (locking during start and end, balancing hand and needle, removing unwanted threads).

Knowledge of consequences of tetanus from needle

31


11

TASK TITLE: Performing French-knot-works. TASK NO: 7



DID THE CANDIDATE?





5. Perform French-knots properly.




32

TASK SPECIFICATION

5

TASK TITLE: Performing Sitara-works. JOB TITLE: Hand Embroiderer L - 1 TASK NO: 8

6

TASK ELEMENTS

8.1 Selects type, color and size of sitara. 8.2 Selects type and color of threads. 8.3 Selects required tools and materials. 8.4 Selects needles. 8.5 Sets needles. 8.6 Performs sitara works.

Ends stitches properly.

Cuts excess threads.

Irons finished products.

33

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Frames/rings, Scissors, Irons, and Needles. Materials: Different types and colors of Threads, Fabrics, Sitara, Baythan.

8


• Appropriate types, colors and size of sitara selected.

• Appropriate types and colors of threads selected.


• Proper types and sizes of needles selected.


• Sitara works properly performed.





34

9

10

TASK TRAINING DATA

TASK No. T.E. No.



SAFETY AND HYGIENE

8

1.

2.

3.

Knowledge of selecting types, size, and color of sitara according to the fabrics color. Knowledge color combination of threads and sitara. Knowledge of Sitara works (locking during start and end, balancing hand and needle, removing unwanted threads).


35


11

TASK TITLE: Performing sitara works. TASK NO: 8



DID THE CANDIDATE?

1. Select appropriate types, colors and size of sitara.

2. Select appropriate types and colors of threads.


4. Select proper types and sizes of needles.


6. Perform Sitara works properly.





36

TASK SPECIFICATION

5

TASK TITLE: Performing Bead-works. JOB TITLE: Hand Embroiderer ,L - 1 TASK NO: 9

6

TASK ELEMENTS

9.1 Selects type, color and size of beads. 9.2 Selects type and color of threads. 9.3 Selects required tools and materials. 9.4 Selects needles. 9.5 Sets needles. 9.6 Performs beads works. 9.7 Ends stitches properly. 9.8 Cuts excess threads. 9.9 Irons finished products.

37

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Frames/rings, Scissors, Irons, and Needles. Materials: Different types and colors of Threads, Fabrics, Beads, Baythan.

8


• Appropriate type, color and size of beads selected.

• Appropriate type and color of threads selected.




• Bead works properly performed.




38

9

10

TASK TRAINING DATA

TASK No. T.E. No.



SAFETY AND HYGIENE

9

1.

2.

3.

Knowledge of selecting types, size, and color of beads according to the fabrics color. Knowledge color combination of threads and beads. Knowledge of beads works (locking during start and end, balancing hand and needle, removing unwanted threads).


39


11

TASK TITLE: Performing beads works. TASK NO: 9



DID THE CANDIDATE? 1. Select appropriate types, colors and size of beads.

2. Select appropriate types and colors of threads.


4. Select proper types and sizes of needles.


6. Perform Beads works properly.





40

TASK SPECIFICATION

5

TASK TITLE: Performing stone-works. JOB TITLE: Hand Embroiderer L - 1 TASK NO: 10

6

TASK ELEMENTS

10.1 Selects type, color and size of Stones. 10.2 Selects type and color of threads. 10.3 Selects required tools and materials. 10.4 Selects fabric glues. 10.5 Selects needles. 10.6 Sets needles. 10.7 Performs stones works. 10.8 Ends stitches properly. 10.9 Cuts excess threads. 10.10 Irons finished products.

41

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Frames/rings, Scissors, Needles, Irons, Brush. Materials: Different types and colors of Threads, Fabrics, Stones, Baythan, Fabric glues.

8


• Appropriate type, color and size of Stones selected.



• Appropriate fabric glues selected.



• Stone works properly performed.




42

9

10

TASK TRAINING DATA

TASK No. T.E. No.



SAFETY AND HYGIENE

10

1.

2.

3.

Knowledge of selecting types, size, and color of Stones according to the fabric’s color. Knowledge color combination of threads and Stones. Knowledge of Stones works (locking during start and end, balancing hand and needle, removing unwanted threads, use of fabric glue).

Knowledge of consequences of strong scent of glue.

43


11

TASK TITLE: Performing stone-works TASK NO: 10



DID THE CANDIDATE?

1. Select appropriate type, color and size of Stones.

2. Select appropriate type and color of threads.


4. Select appropriate fabric glues.



7. Perform stone works properly.




44

TASK SPECIFICATION

5

TASK TITLE: Performing mirror works. JOB TITLE: Hand Embroiderer L - 1 TASK NO: 11

6

TASK ELEMENTS

11.1 Selects type, color and size of Mirrors. 11.2 Selects type and color of threads. 11.3 Selects required tools and materials. 11.4 Selects fabric glues. 11.5 Selects needles. 11.6 Sets needles. 11.7 Performs Mirror works. 11.8 Ends stitches properly. 11.9 Cuts excess threads. 11.10 Irons finished products.

45

TASK SPECIFICATION

7

TASK PERFORMANCE REQUIREMENTS Tools and equipment: Frames/rings, Scissors, Needles, Irons, Brush. Materials: Different types and colors of Threads, Fabrics, Mirrors, Baythan, Fabric glues.

8


• Appropriate type, color and size of Mirror selected.



• Appropriate fabric glues selected.



• Stone works properly performed.




46

9

10

TASK TRAINING DATA

TASK No. T.E. No.



SAFETY AND HYGIENE

11

1.

2.

3.

Knowledge of selecting types, size, and color of Mirrors according to the fabric’s color. Knowledge color combination of threads and Mirrors. Knowledge of Mirrors works (locking during start and end, balancing hand and needle, removing unwanted threads, use of fabric glue).


47


11

TASK TITLE: Performing mirror works. TASK NO: 11



DID THE CANDIDATE?

1. Select appropriate type, color and size of Mirrors.

2. Select appropriate type and color of threads.


4. Select appropriate fabric glues.



7. Perform stone works properly.




Documents

Uploads_downloads_Hand Embroiderer, OSS, L-1