3
Technical Conference Organiser Host City ADIPEC Organised By Official Media Partner Supported By One global industry. One city. One meeting place. 12 - 15 November 2018 HOST T: (+971) 2 444 4909 F: (+971) 2 444 4383 E: [email protected] W: www.adipec.com 6th floor, Office #612, Twofour54 Park Rotana Offices, Salam St., Abu Dhabi - UAE, PO Box 769256 Exhibitors who have booked a Traditional stand will receive a stand erected to the following specification. It is made of Wooden structure, each wall panel is 3m(H) x 1m(W), with dividing groove. This is built to an overall height of 3m. Stand height should not exceed 3metres. Stand Construction 5cm thick wooden structure, with white emulsion paint finish. Each wall panel is 1mW x 3mH (MDF Panels). Number of wall panel for each stand will vary on how many open sides that the stand has. Please refer to the floor plan on your manual for reference. Walls 1 x 4m MDF beam at the center with white emulsion paint finish to support stand structure. Ceiling Beams Stand includes furniture package comprising 2 black chairs (MC12), 1 black table (MT21), 1 Literature rack (XA51) and 1 waste bin (MA10) per 12sqm size of the stand. Please refer to the below breakdown list for number of furniture for your stand size in sqm. It is prohibited to swap/replace furniture items on the package. Exhibitors may order additional furniture items at an additional cost. Furniture distribution breakdown is below. Furniture Exhibition grade carpet laid direct to hall floor. Standard colour carpet for shell scheme stand will be provided as part of the package. Any changes to the colour of the carpet should be ordered using the order form, and will be at an additional cost. Floor Covering The infill fascia is 400mm deep. The Exhibitor’s name and stand number in Black will be in 65mm capital lettering and fixed directly to the White fascia. Support columns will be positional at corners and in between where fascia’s exceed 3meters in length Fascia/Name Panel Board Trad wall at 3000mm H and fascia at 400mm H. Built to a height of 3metres. Height of Stand 3 x 75 Watts metal halide spotlights per 12m². White colour lights with black colour track, Note that spotlights can only be located on the center ceiling of the beam as this can be rotated 360degrees. Please refer to the below breakdown list for number of spotlights for your stand size in sqm. Electrical Lights Please contact GES if you would like to attach any graphics to the stand walls. It is allowed to fix product display items to the walls up to 5 kg, if the product display is heavier than 5 kg, please contact GES for assistance. Extra cost might be applicable for panel reinforcement if the product display is over 5 kg. Stand Walls 1 x electrical socket (Standard British square 3 pin) on the rear wall as shown on the above booth design per 12m². Please note that shell scheme stands are only provided for a stand power up to 400watts. Anything above 500watts power will require an additional mains power supply (e.g. coffee machines, kettles, etc). If unsure please feel free to contact us. Please refer to the below breakdown list for number of sockets for your stand size in sqm. If exhibitors would like specific positions for the socket, then this must be sent to GES using the Grid Plan provided. Otherwise sockets will be positioned in a default position. Changes onsite will be subject to relocation fee. Electrical Sockets UPGRADED SHELL SCHEME STAND (TRADITIONAL STANDS) SPECIFICATIONS

Upgraded Shell Scheme - strukturnifondovi.hr

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Upgraded Shell Scheme - strukturnifondovi.hr

Technical Conference Organiser

Host City ADIPECOrganised By

Of�cial MediaPartner

Supported By

One global industry. One city. One meeting place.12 - 15 November 2018

HOST

T: (+971) 2 444 4909F: (+971) 2 444 4383

E: [email protected]: www.adipec.com

6th floor, Office #612, Twofour54 Park Rotana Offices, Salam St., Abu Dhabi - UAE, PO Box 769256

Exhibitors who have booked a Traditional stand will receive a stand erected to the following specification.

It is made of Wooden structure, each wall panel is 3m(H) x 1m(W), with dividing groove. This is built to an overall height of 3m. Stand height should not exceed 3metres.

Stand Construction

5cm thick wooden structure, with white emulsion paint finish. Each wall panel is 1mW x 3mH (MDF Panels). Number of wall panel for each stand will vary on how many open sides that the stand has. Please refer to the floor plan on your manual for reference.

Walls

1 x 4m MDF beam at the center with white emulsion paint finish to support stand structure. Ceiling Beams

Stand includes furniture package comprising 2 black chairs (MC12), 1 black table (MT21), 1 Literature rack (XA51) and 1 waste bin (MA10) per 12sqm size of the stand. Please refer to the below breakdown list for number of furniture for your stand size in sqm. It is prohibited to swap/replace furniture items on the package. Exhibitors may order additional furniture items at an additional cost. Furniture distribution breakdown is below.

Furniture

Exhibition grade carpet laid direct to hall floor. Standard colour carpet for shell scheme stand will be provided as part of the package. Any changes to the colour of the carpet should be ordered using the order form, and will be at an additional cost.

Floor Covering

The infill fascia is 400mm deep. The Exhibitor’s name and stand number in Black will be in 65mm capital lettering and fixed directly to the White fascia. Support columns will be positional at corners and in between where fascia’s exceed 3meters in length

Fascia/Name Panel Board

Trad wall at 3000mm H and fascia at 400mm H. Built to a height of 3metres. Height of Stand

3 x 75 Watts metal halide spotlights per 12m². White colour lights with black colour track, Note that spotlights can only be located on the center ceiling of the beam as this can be rotated 360degrees. Please refer to the below breakdown list for number of spotlights for your stand size in sqm.

Electrical Lights

Please contact GES if you would like to attach any graphics to the stand walls. It is allowed to fix product display items to the walls up to 5 kg, if the product display is heavier than 5 kg, please contact GES for assistance.Extra cost might be applicable for panel reinforcement if the product display is over 5 kg.

Stand Walls

1 x electrical socket (Standard British square 3 pin) on the rear wall as shown on the above booth design per 12m². Please note that shell scheme stands are only provided for a stand power up to 400watts. Anything above 500watts power will require an additional mains power supply (e.g. coffee machines, kettles, etc). If unsure please feel free to contact us. Please refer to the below breakdown list for number of sockets for your stand size in sqm.If exhibitors would like specific positions for the socket, then this must be sent to GES using the Grid Plan provided. Otherwise sockets will be positioned in a default position. Changes onsite will be subject to relocation fee.

Electrical Sockets

UPGRADED SHELL SCHEME STAND (TRADITIONAL STANDS) SPECIFICATIONS

Page 2: Upgraded Shell Scheme - strukturnifondovi.hr

Please note this technical drawing is an example of a corner stand. 12sqm (4m x3m) The space the Exhibitor has booked with the Organiser may be a corner, terrace or island stand and may look different to this drawing. Please check with the Organiser should you wish to confirm your stand space.

Technical Conference Organiser

Host City ADIPECOrganised By

Of�cial MediaPartner

Supported By

One global industry. One city. One meeting place.12 - 15 November 2018

HOST

T: (+971) 2 444 4909F: (+971) 2 444 4383

E: [email protected]: www.adipec.com

6th floor, Office #612, Twofour54 Park Rotana Offices, Salam St., Abu Dhabi - UAE, PO Box 769256

2500

mm

400m

m

PACKAGE BREAKDOWN

Page 3: Upgraded Shell Scheme - strukturnifondovi.hr

Technical Conference Organiser

Host City ADIPECOrganised By

Of�cial MediaPartner

Supported By

One global industry. One city. One meeting place.12 - 15 November 2018

HOST

Electrical Fittings   Furniture Package

75WattsMetal Halide

SingleSockets

ISO Chair MC12

Arc Table MT21

Waste BinMA10

Literature RackXA51

6   SqM  2 1 2 1 1 1

9   SqM  3 1 2 1 1 1

12  SqM  3 1 2 1 1 1

15  SqM  4 1 3 1 1 1

18  SqM  4 1 3 1 1 1

21  Sqm  5 1 3 1 1 1

24  SqM  6 2 4 2 2 2

27  SqM  6 2 4 2 2 2

30  Sqm  7 2 5 2 2 2

36  SqM  9 3 6 3 3 3

42  SqM  10 3 7 3 3 3

50  Sqm  12 4 8 4 4 4

72  SqM  18 6 12 6 6 6

TRAD

ITIO

NAL

Grey Stand Carpet and Blue Aisle Carpet Carpet:

T: (+971) 2 444 4909F: (+971) 2 444 4383

E: [email protected]: www.adipec.com

6th floor, Office #612, Twofour54 Park Rotana Offices, Salam St., Abu Dhabi - UAE, PO Box 769256

PACKAGE BREAKDOWN