UPGRADE KITS FOR CAT® G3304/ G3306/ G3406The Century of Ignition Magnetos is over. Move forward to the generation of electronic ignition. MOTORTECH offers full ignition upgrade kits which contain all parts you need to remove the magneto and install the micro-processor controlled electronic ignition system.

Kit contains:• AlphaRailwithhighenergyignitioncoilsand PolyMot® high tension leads• MIC500seriesignitioncontrolunitandharnesses• Mechanicaltriggerkitwithdisc, adapter ring and pickup• Magnetodrivecoverkit

non-shielded

Try the alternative.Call the nearest MOTORTECH sales partner for more information. REV.03/2014

Caterpillar® Ignition Kit for G3304∙ PreprogrammedMIC520ignitioncontroller ∙ Wiring rail with ignition coils and brackets ∙ Harnesses for in- and output ∙ Pickup ∙ High tension leads∙ Mechanicaltriggerkitwithdiscandadapterring/gaskets ∙ Magneto drive cover plate and gasket

P/N 75.00.338

These Kits will allow you to do a full upgrade and ignite the engine in a single firing mode!

For small and mid-sized gas engines from 2-16 cylinders: ∙ Microprocessorcontrolled,singlepickup,camshaft

disc (4-stroke) or flywheel (2-stroke) triggered.∙ Fully programmable timing control curves and

other features.

Top quality materials and design last longer:• Madefromstainlesssteelforharshenvironment• Specialfoamfilledtoensurethatallwiresareseparated from ground and will not vibrate and eventually short out ground• Noboltsandnutsthatcomeloosefromvibration

Optional available:MIC500 Series Ignition MonitoringRS232 Ignition DisplayLinkedtoRS232interfaceoftheMIC500datalikefollowing can be displayed:• Ignitiontiming• Enginespeed• Ignitionenergy• Analoginputcurrent• Alarmanderrormessages

P/N 06.05.040A

These Kits will allow you to do a full upgrade and ignite the engine in a single firing mode!

Caterpillar® Ignition Kit for G3406∙ PreprogrammedMIC520ignitioncontroller ∙ Wiring rail with ignition coils and brackets ∙ Harnesses for in- and output ∙ Pickup ∙ High tension leads∙ Mechanicaltriggerkitwithdiscandadapterring/gaskets ∙ Magneto drive cover plate and gasket

P/N 75.00.336

Caterpillar® Ignition Kit for G3306∙ PreprogrammedMIC520ignitioncontroller ∙ Wiring rail with ignition coils and brackets ∙ Harnesses for in- and output ∙ Pickup ∙ High tension leads∙ Mechanicaltriggerkitwithdiscandadapterring/gaskets ∙ Magneto drive cover plate and gasket

P/N 75.00.337

Optional available:Tool for CAT G3406Forkspanner,swan-neckedfor easy removal of camshaft drive gear.

P/N 44.04.005

Upgrade kits also available for shielded applications.

Ask your nearest distributor.

75.00.338CAT G3304

75.00.337CAT G3306

75.00.336CAT G3406

P/N Description Quantity

06.00.520 MIC520IgnitionController,8outputs(preprogrammed) 1 1 1

06.02.501-160 InputHarness,inductivePickup,160“(4m) 1 1 1

77.49.023-4000 OutputHarnesstoIgnitionRail,160“(4m),G-Lead 1

77.49.022-4000 OutputHarnesstoIgnitionRail,160“(4m),G-Lead 1 1

75.40.106-I IgnitionRail,4Cylinder 1

75.40.105-I IgnitionRail,6Cylinder 1 1

75.10.301 Bracket,IgnitionRail 2 2

75.10.300 Bracket,IgnitionRail 2

06.88.009-18 High Tension Lead 4 6

06.85.751-16 High Tension Lead 6

66.60.003-60 Pickup,inductive,M12x1,60mm 1 1 1

75.30.132 TriggerKit(4+1) 1

75.30.131 TriggerKit(6+1) 1

75.30.133 TriggerKit(6+1) 1

24.95.002 FlangeCoverPlate,Magneto 1 1 1

non-shielded

P/N01.15.006-EN|MOTORTECHSalesFlyerUpgradeKitsCAT

Distributed by:COPYRIGHT

Copyright für jegliche in Publikationen von MOTORTECH verwendeten Materialien vorbehalten. JeglicheVervielfältigungoderNutzungvonObjektenwieBildernoderTextbausteineninanderenelektronischenoder gedruckten Publikationen ist nur mit Zustimmung von MOTORTECH zulässig.

Warenzeichenhinweis

MOTORTECHistnichtanALTRONIC®,CATERPILLAR®,WAU-KESHA®beteiligtoderangegliedert.AlleOEM-NamenundTeilenummern sind lediglich zu Referenzzwecken angege-ben.AlleRechteanWarenzeichen,LogosundSymbolen,diein MOTORTECH-Publikationen verwendet oder abgebildet werden,sindausschließlichdemjeweiligenEigentümervor-behalten und werden nur zu Referenzzwecken verwendet.

CAT® – Ignition Kits G3300 / G3400 Series