Upload
sameer-mhatre
View
214
Download
0
Embed Size (px)
Citation preview
7/28/2019 universal mobile charger.doc
1/19
UNIVERSAL MOBILE CHARGER
CHAPTER 1
INTRODUCTION
Today, our country INDIA is progressing in every field of technology & science.
Also it has a great advancement in all electronics & electrical field. Today, the world is
becoming smaller & smaller day by day. Because of this highly advanced world, the
human comes across a very limitation of time. At this fast movement of time & adding an
effort with science & technology. Also, by keeping the view to conventional energies &
fuels. We have concluded an instrument which is now very helpful to common man.
Today the common mans need is not only food, clothing, shelters but also to live
in comfort, to have all facilities & also a very important inventionCELLPHONE.
Mobile phones have a great application in a day to day life for metropolitan cities. Butmobile phone doesnt last for long time. Mobile phone needs some source to charge itself
i.e. we must have charger with us. But electrical source is not available everywhere.
So, by focusing the aim as a charger problem we have to come to conclusion that,
we must have such device that must charge mobile at time of need. Our project is to make
charger which charge the mobile by two ways first solar energy and second radio
frequency.
For solar energy with the help of solar panel a portable device can be made. This
charger is designed to help the people when they are unable to charge because of no
electricity. This circuit describes a solar cell phone charger that uses solar panels. DC
voltage is transformed to a mobile phone battery and then charge the battery.
For radio frequency we use the concept of energy harvesting. Energy
harvesting is the idea of gathering transmitted energy and either using it
to power a circuit or storing it for later use. The concept needs an efficient
antenna along with a circuit capable of converting alternating-current (AC)
voltage to direct-current (DC) voltage. The efficiency of an antenna, asbeing discussed here, is related to the shape and impedance of the
antenna and the impedance of the circuit. If the two impedances arent
matched then there is reflection of the power back into the antenna
meaning that the circuit was unable to receive all the available power.
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
1
7/28/2019 universal mobile charger.doc
2/19
UNIVERSAL MOBILE CHARGER
After the both stage done we then combine the both circuits so that both way of
charging is available.This is a hand carry device which can be taking or travel easily. If
can be kept in hand to charge our cell phones or must keep at one place & can charge the
phones.
Universal charger is kind of charger that can charge any mobile battery by radio
waves & solar energy. This project gives us a resultant to save electricity & time for
waiting to charge it.
This is an instrument which is highly applicable for the travelling purpose. For
this energy source is available at any time.
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
2
7/28/2019 universal mobile charger.doc
3/19
UNIVERSAL MOBILE CHARGER
CHAPTER 2
BASICS OF SOLAR ENERGYSolar Energy is the energy received from the sun that sustains life on earth. For
many decades solar energy has been considered as a huge source of energy and also an
economical source of energy because it is freely available. However, it is only now after
years of research that technology has made it possible to harness solar energy.
Solar technologies are broadly characterized as either passive solar or active solar
depending on the way they capture, convert and distribute solar energy. Active solar
techniques include the use of photovoltaic panels and solar thermal collectors to harnessthe energy. Passive solar techniques include orienting a building to the Sun, selecting
materials with favorable thermal mass or light dispersing properties, and designing spaces
that naturally circulate air.
2.1 SOLAR PANEL
A solar cell (also called a photovoltaic cell) is an electrical device that converts
the energy of light directly into electricity by the photovoltaic effect. It is a form of
photoelectric cell (in that its electrical characteristics-- e.g. current, voltage, or
resistance-- vary when light is incident upon it) which, when exposed to light, can
generate and support an electric current without being attached to any external voltage
source.
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
3
7/28/2019 universal mobile charger.doc
4/19
UNIVERSAL MOBILE CHARGER
Fig.1:- Solar panel 12 volt.
The structural (load carrying) member of a module can either be the top layer
(superstrate) or the back layer (substrate). The majority of modules use wafer-
based crystalline silicon cells or a thin-film cell based on cadmium telluride or
silicon. Crystalline silicon, which is commonly used in the wafer form in photovoltaic
(PV) modules, is derived from silicon, a commonly used semi-conductor.
2.2 PHOTOVOLTAIC EFFECT
The photovoltaic effect is the creation of voltage or electric current in a material
upon exposure to light. Though the photovoltaic effect is directly related to the
photoelectric effect, they are different processes.
The photovoltaic effect is the basic physical process through which a PV cell
converts sunlight into electricity Sunlight is composed of photons--packets of solar
energy. These photons contain different amounts of energy that correspond to the
different wavelengths of the solar spectrum. When photons strike a PV cell, they may be
reflected or absorbed, or they may pass right through. The absorbed photons generate
electricity.
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
4
7/28/2019 universal mobile charger.doc
5/19
UNIVERSAL MOBILE CHARGER
Fig.2:-PHOTOVOLTAIC EFFECT
The energy of a photon is transferred to an electron in an atom of the semiconductor
device. With its newfound energy, the electron is able to escape from its normal position
associated with a single atom in the semiconductor to become part of the current in an
electrical circuit. Special electrical properties of the PV cell a built-in electric field
provide the voltage needed to drive the current through an external load.
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
5
7/28/2019 universal mobile charger.doc
6/19
UNIVERSAL MOBILE CHARGER
CHAPTER 3
RADIO WAVEES
Radio waves are a type of electromagnetic radiation with wavelengths in the
electromagnetic spectrum longer than infrared light. Radio waves have frequencies from
300 GHz to as low as 3 kHz, and corresponding wavelengths from 1 millimeter to 100
kilometers. Like all other electromagnetic waves, they travel at the speed of light.
Naturally occurring radio waves are made by lightning, or by astronomical objects.
Artificially generated radio waves are used for fixed and mobile radio communication,
broadcasting, radar and other navigation systems, communications satellites, computer
networks and innumerable other applications. Different frequencies of radio waves have
different propagation characteristics in the Earth's atmosphere; long waves may cover a
part of the Earth very consistently, shorter waves can reflect off the ionosphere and travel
around the world, and much shorter wavelengths bend or reflect very little and travel on a
line of sight.
3.1 RADIO SPECTRUM
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
6
7/28/2019 universal mobile charger.doc
7/19
UNIVERSAL MOBILE CHARGER
Radio spectrum refers to the part of the electromagnetic spectrum corresponding
to radio frequencies that is, frequencies lower than around 300 GHz (or, equivalently,
wavelengths longer than about 1 mm).
Different parts of the radio spectrum are used for different radio transmission
technologies and applications. Radio spectrum is typically government regulated in
developed countries and, in some cases, is sold or licensed to operators of private radio
transmission systems (for example, cellular telephone operators or broadcast television
stations). Ranges of allocated frequencies are often referred to by their provisioned use
(for example, cellular spectrum or television spectrum).
The National Frequency Allocation Plan (NFAP) forms the basis for development
and manufacturing of wireless equipment and spectrum utilization in the country.
Frequency bands allocated to various types of radio services in India are as follows.
i) 0-87.5 MHz is used for marine and aeronautical navigation, short and medium wave
radio, amateur (ham) radio and cordless phones.
ii) 87.5-108 MHz is used for FM radio broadcasts
iii) 109- 173 Used for Satellite communication, aeronautical navigation and outdoor
broadcast vans
iv) 174-230 MHz not allocated.
v) 230450 Used for Satellite communication, aeronautical navigation and outdoor
broadcast vans
vi) 450- 585. Not allocated.
vii) 585-698 Used for TV broadcast
viii) 698-806 not allocated.
ix) 806-960 Used by GSM and CDMA mobile services
x) 960-1710 Aeronautical and space communication
xi) 1710- 1930 Used for GSM mobile services
xii) 1930-2010 Used by defence forces
xiii) 2010-2025 Not allocated
xiv) 2025-2110 Satellite and space communications
xv) 2110-2170 Not allocated
xvi) 2170-2300 Satellite and space communications
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
7
7/28/2019 universal mobile charger.doc
8/19
UNIVERSAL MOBILE CHARGER
xvii) 2300-2400 not allocated.
xviii) 2400- 2483.5 Used for Wi-Fi and Bluetooth short range services
xix) 2483.5-3300 Space communications
xx) 3300-3600 not allocated.
xxi) 3600-10000 Space research, radio navigation
xxii) 10000 used for satellite downlink for broadcast and DTH services
CHAPER 4
CIRCUITT DIAGRAM
4.1 SOLAR PANEL
Fig 3-CIRCUIT DIAGRAM FOR SOLAR PANEL
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
8
7/28/2019 universal mobile charger.doc
9/19
UNIVERSAL MOBILE CHARGER
4.2 Working
Here is solar charger circuit that is used to charge Lead Acid or Ni-Cd batteries
using solar energy power. The circuit harvests solar energy to charge a 6 volt 4.5Ah
rechargeable battery for various applications. The charger has voltage & currentregulation & over voltage cut off facilities.
The circuit uses a 12V solar panel & variable voltage regulator IC LM317. The
solar panel consists of solar rated 1.2V. 12V DC is available from the solar panel to
charge the battery. Charging current passes through D1 to the voltage regulator IC
LM317. By adjusting its adjust pin, output voltage & current can be regulated.
Voltage regulator is placed between the adjust pin & ground to provide tan output
voltage of 9V to the battery. Resistor R3 restricts charging current & diode D2 o prevent
discharge of current from the battery. Transistor T1 & zener diode ZD acts as a cut-off
switch when battery is full. Normally T1 is off & battery gets charging current.
When terminal voltage of battery rises above 6.8V, zener diode conducts &
provides base current to T1. It is then turn on grounding the output of LM317 to stop
charging.
IC LM317
Fig 4- IC LM 317
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
9
7/28/2019 universal mobile charger.doc
10/19
UNIVERSAL MOBILE CHARGER
LM 317 is the three-terminal positive voltage regulator. The different grades of regulator
in the series are available with output voltage of 1.2V to 57V & output current from
0.10A to 1.5A.The LM317 series regulators are available in standard transistor packages
that are easily mounted & handle.
This IC LM317 having three terminals , the terminals are Vin, Vout, &
adjustment. LM 317requires only 2 external resistors to set output voltage.LM 317
develop nominal 1.25V referred to as the reference voltage Vref, between the output &
adjustment terminal. This referred voltage is appears across R1 resistor & since the
voltage is constant, the current I1 is also constant for a given value of R1 Because of
resistor R1 sets current I1. It is called current set or programmed resistor. In addition to
current I1, the current Iadj also flow from the adjustment terminal also flows through the
The output of LM 317 is
Vo=R1.I1+R2(I1+ Iadj) -----(1)
Where,
I1= Vref/R1
R1= Current (I1) set resistor
R2=output (Vo) set resistor
Iadj= adjustment pin current
Substituting the value of\\\i1 in equation 1 & rearranging, we get substituting the
value of I1 in equation 1 & rearranging, we get
Vo=vref(1=R2/R1)+Iadj*R2
Where
Vref= 1.25 (Referance voltage between output & input terminal)
Iadj= 100 micro ampere (It is very small & can be neglected)
Vo=1.25(1+R!/R2)
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
10
7/28/2019 universal mobile charger.doc
11/19
UNIVERSAL MOBILE CHARGER
4.3 RADIO FREQUENCY
THE CHARGE PUMP
A charge pump is a circuit that when given an input in AC is able to output a DC
voltage typically larger than a simple rectifier would generate. It can be thought of as a
AC to DC converter that both rectifies the AC signal and elevates the DC level.
4.4 VOLTAGE DOUBLER
The charge pump circuit is made of stages of voltage doublers. This circuit is
called a voltage doubler because in theory, the voltage that is received on the output is
twice that at the input.
Fig 4:- Voltage Double Schematic
The schematic in Figure 3.5 represents one stage of the circuit. The RF wave is rectified
by D2 and C2 in the positive half of the cycle, and then by D1 and C1 in the negative
cycle. But, during the positive half-cycle, the voltage stored on C1 from the negative
half-cycle is transferred to C2. Thus, the voltage on C2 is roughly two times the peak
voltage of the RF source minus the turn-on voltage of the diode, hence the name voltage
doubler.
4.5 OUTPUT OF VOLTAGE DOUBLER
The output is not exactly DC. Ii is AC signal with a DC offset. This is
equivalent to saying the DC signal contains noise. This can be seen in
Figure 3.6. This is where the other stages come in. If a second stage is
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
11
7/28/2019 universal mobile charger.doc
12/19
UNIVERSAL MOBILE CHARGER
added on top of the first, the only wave that the second stage sees is
the noise of the first stage. This noise is then doubled and added to the
DC of the first stage. Therefore, the more stages that are added,
theoretically, more voltage will come from the system irregardless of
the input.
Fig 5:- Voltage Doubler Waveform
Each independent stage, with its dedicated voltage doubler circuit, can be seen as a
battery with open circuit output voltage VO and internal resistance RO. When n of these
circuits are put in series and connected to a load of RL, the output voltage will be given by
Equation
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
12
7/28/2019 universal mobile charger.doc
13/19
UNIVERSAL MOBILE CHARGER
4.6 NUMBER OF STAGES
FIG 6:-VOLTAGE DOUBLER WITH OUTPUT CAPACITANCE
The number of stages is essentially directly proportional to the amount of voltage
obtained at the output of the system. Generally, the voltage of the output increases as the
number of stages increases.
4.6.1 STAGE CAPACITANCE
Minimal changing of the capacitance will have a drastic effect on the output
voltage. There are a couple of different values that can be used for the capacitance. The
first, is to keep all the values in all the stages the same. A second way is to gradually
decrease the value of the stage capacitors as the number of stages increases. Each stage
uses two capacitors, and those are kept the same, but the change is made from one stage
to the next. If the first stage uses 100pF capacitors, then the next stage would use 50Pf.
4.6.2 OUTPUT CAPACITANCE
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
13
7/28/2019 universal mobile charger.doc
14/19
UNIVERSAL MOBILE CHARGER
The value of this capacitor only affects the speed of the transient response. The
bigger the value for the output capacitance, the slower the voltage rise time. Without a
capacitor there, the output is not a good DC signal, but more of an offset AC signal,
meaning that it will be DC with ripple.
4.6.3 ALTERNATIVE CHARGE PUMP
A popular charge pump, due to Dickson has the configuration shown in
Figure 7. This circuit uses two complementary phase clocks to multiply the input
Voltage.
FIG 7:-DICKSON CHARGE PUMP
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
14
7/28/2019 universal mobile charger.doc
15/19
UNIVERSAL MOBILE CHARGER
FIG 8:-DICKSON CHARGE PUMP INPUT & OUTPUT
CHAPTER 5
FUTURE WORK
Material purchasing.
Implementation of circuits.
Combining both circuits.
Interfacing with cellphone.
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
15
7/28/2019 universal mobile charger.doc
16/19
UNIVERSAL MOBILE CHARGER
CHAPTER 6
APPROXIMATE COSTING
Main parts
Solar panel-1400/-
RF receiver-800/-
Tools and hardware-1000/-
Total estimate cost-3200/-
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
16
7/28/2019 universal mobile charger.doc
17/19
UNIVERSAL MOBILE CHARGER
CHAPTER 7
ADVANTAGES AND DISADVANTAGES
ADVANTAGES
Utilization of non conventional energy (solar energy). Low maintenance.
Portable.
As radio waves available at everywhere charging can be done at any time.
DISADVANTAGES
Cost is high (solar panel).
Charger may not work properly in rainy days.
For radio waves efficiency may get decrease in village areas.
Impedance matching affects the circuit.
APPLICATIONS
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
17
7/28/2019 universal mobile charger.doc
18/19
UNIVERSAL MOBILE CHARGER
Use for most cell phone models.
Also for small digital electronics (PDA, MP3, Digital Camera,).
Charging of rechargeable batteries.
CHAPTER 8
CONCLUSION
In world in which millions of people have mobile phones but lack access to the
electricity, it is even more important to develop charging solution.
This device can be used widely where peoples are suffering from the problem of
electricity, load shedding & power cut off. This device uses non conventional energy
therefore it is beneficial for the environment.
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
18
7/28/2019 universal mobile charger.doc
19/19
UNIVERSAL MOBILE CHARGER
CHAPPTER 9
REFRENCES
1. Electroschematics.com
2. WIRELESS BATTERY CHARGING SYSTEM USING RADIO FREQUENCY
ENERGY HARVESTING by Daniel W. Harrist BS, University of Pittsburgh.
3. RF TO DC POWER GENERATION, Juventino Delfino Rosas Espejel, Master
of Science, 2003by: Professor Robert Wayne Newcomb Department of Electrical
& Computer Engineering.
Dept. of Instrumentation & Control, KBTCOE, Nashik-422013
19