Upload
tamsin-venter
View
233
Download
0
Embed Size (px)
Citation preview
8/12/2019 Unit Outline, Semester 2, 2013
1/21
Faculty of Engineering, Computing and Mathematics
http://www.ecm.uwa.edu.au/
Project Management and Engineering Practice (GENG5505)
http://units.handbooks.uwa.edu.au/units/geng/geng5505
Credit points: 6
Semester two, 2013
Crawley Campus
Unit Coordinator: Assoc/Prof Cosimo Faiello
http://units.handbooks.uwa.edu.au/units/geng/geng5505http://units.handbooks.uwa.edu.au/units/geng/geng55058/12/2019 Unit Outline, Semester 2, 2013
2/21
8/12/2019 Unit Outline, Semester 2, 2013
3/21
- -3
CONTENTS
CONTACT DETAILS 4
TUTORS 5
UNIT DESCRIPTION 6
Introduction and goal of the unit 6Learning outcomes 6
Educational principles 7
Generic skills developed in this unit 7
Learning activities that support learning outcomes 7
TEXTBOOK & RESOURCES 8
Textbook 8Other resources and reading material 8
TEACHING AND LEARNING RESPONSIBILITIES 9
Teaching and learning approaches 9
Use of student feedback 9
Charter of student rights and responsibilities 9
Student Guild contact details 9
UNIT ASSESSMENT 10
Assessment summary 10
Assessment details 11Standard of assessment 16
Supplementary assessment 17
Ethical Scholarship, Academic Literacy and Academic Misconduct 17Acknowledging sources of information 17
Appeals against academic assessment 18
LECTURES, TUTORIALS AND ASSESSMENT SCHEDULE 19
8/12/2019 Unit Outline, Semester 2, 2013
4/21
- -4
CONTACT DETAILS
Unit coordinator and lecturer
Name: Cosimo Faiello
Email: [email protected]
Phone: 6488 2841
Fax: (08) 6488 1065
Mob: 0417 984 470
Office: Room 4.24, 4thfloor, Electrical and Electronic Engineering Building
Consultation time: Wednesday 2pm & by appointment
Lecture time: Monday 3pm & Wednesday 3pm
Lecture venues: Alexander Lect. Theatre and Murdoch Lect. Theatre (Arts Building)
Tutorial time: Monday 4pm and 5pm Wednesday 4pm and 5pm Friday 11am, 12pm, 1pm, 2pm and 3pm
Tutorial venue: Monday: Arts:LR8 Wednesday: Arts:LR9
Friday:ENCM:G11
Cosimo has a Doctorate in Science (D.Sc.) from Italy, an MBA (advanced) and a
Master of Marketing (MMktg) focusing on project management and sustainable
business development from UWA. He has been lecturing sustainable project
management, strategic management and a number of marketing courses at UWA since
2006. He also taught management and international marketing at Curtin University.
Cosimo has considerable experience in project management, strategic management,
sustainable business development and sustainable marketing, both in Italy and
Australia. In Italy, he developed and managed a number of projects and held a senior
management position as an advisor for the Italian Government. In Australia, Cosimo
has managed several projects and held a board position as technical director for a
publicly listed company. Cosimo has been running a consulting company specialisingin sustainable business development, strategy and project management since 1999.
mailto:[email protected]:[email protected]8/12/2019 Unit Outline, Semester 2, 2013
5/21
- -5
Your tutors
Antoine Musu (Email:[email protected])
Senior hotel, leisure and tourism executive experienced in directing, developing andmanaging medium to large hotels, private membership clubs, recreational and sporting clubs,and an ASX listed hotel group. Possess diversified business skills across several functionswith work experience in Australian capital cities, South-East Asia and Europe. Establishedbusiness relationships and maintain networks in several industry groups and professionalassociations. I hold a Master of Business Innovation (MBI) and a Master of BusinessAdministration (MBA), from UWA Business School. Im currently completing a Doctorate ofBusiness Administration (DBA) at UWA and my research interests include tourisminnovation and development in regional Western Australia.
Soon Aun Khoo: (Email:[email protected])
I am in my last semester of Mechanical Engineering, majoring in Oil and Gas atUWA. I
have a great passion and interest in the sustainability field applied to project management.
My final year researchproject analyses sustainabilitypractices applied to themanagementof the recentlycompleted Pluto LNGproject. I took Project Management and Engineering
Practice in 2012 and it was an eye-opener for me as it differs from other engineering units,
as itprovides a more theoretical approach which is beneficial to handling day-to-day
problem solving scenarios and decision making in the engineering field. I have beenactively involved in the International Student Services and Multicultural Week throughout my
wholestudent life. I started tutoring atUWA in semester 1, 2013 in various fields such as
Mathematics, Mechanical Engineering and Physics.
Lia Donaldson Email:[email protected]
Im a 4thyear Civil Engineering Honours student at UWA, with a strong focus towards a
career in project management and sustainable development. Im currently working on mythesis, which concentrates on integrating sustainable development into the project lifecycle,most specifically within the civil and construction industry.Im also currently a part of the UniMentor Volunteer program, which aims to assist newstudents with settling into university life. The program seamlessly fosters personal awareness,cultural awareness and sensitivity. As a volunteer I feel that on top of these skills I have alsovastly improved my communication and leadership skills.I have previously partaken in this Project Management and Engineering Practice unit andfound it to be an extremely rewarding experience both personally and professionally. As atutor I will aim to make the unit both enjoyable and a beneficial learning experience.
Cosimo Faiello Email:[email protected]
mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]8/12/2019 Unit Outline, Semester 2, 2013
6/21
- -6
UNIT DESCRIPTION
Introduction and goal of the unit
This unit will introduce students to the field of project management and engineering practice
with a focus on achieving sustainable results based on a triple bottom line (TBL) approach:that is, achieving project objectives, while taking into account the societal and environmentalimplications of a project. A TBL approach to project management is now widely recognisedby many organizations as being vital to achieving their strategic objectives. The achievementof strategic objectives often involves innovation and change. When innovation and change are
associated with sustainable project management, organizations not only obtain a long-termcompetitive advantage, but they achieve it with strong support from a wide range ofstakeholders. These are vital ingredients for organizations to remain viable and thrive over thelong term.
Learning outcomes
On completion of this unit, students should be able to:
1. Evaluate sustainable project management theories and frameworks and apply them toreal world projects;
2. Identify and evaluate problems relating to initiating, planning, executing, monitoringand controlling projects and choose appropriate frameworks and theories to solvethem;
3. Understand how to align projects with organizational goals, and recognize thestrategic significance of successful project portfolio selection;
4. Identify key project stakeholders and propose effective response strategies to manage
stakeholder pressure in both local and global projects;5. Formulate effective communication strategies (both written and oral) to correspond
successfully with a wide range of project stakeholders;
6. Recommend how to manage and lead a team throughout the various phases of a
project, and propose strategies to actively solve conflict among team members;
7. Evaluate the main normative ethical theories and apply them to specific real worldprojects.
Due to rapid change in the global business environment and the pressure of intensecompetition, more and more of organizational work has become project work. Sustainableproject managementbased on an ethical TBL approach - is an important tool available to an
organization to successfully complete projects with a definite scope, budget, timetable, andquality standards, in line with strategic organizational goals.
For a project to achieve the above with ethical TBL practices, requires savvy leadership andmanagement. This will be the objective of this course: To give students theoretical knowledge
and skills to become proficient in managing and leading projects ethically, whilst achievingsustainable outcomes using a TBL strategy.
8/12/2019 Unit Outline, Semester 2, 2013
7/21
- -7
Educational and generic skills students will develop in this unit
Multidisciplinary approach to learning (i.e. integrating knowledge across disciplinessuch as several engineering fields, finance, communication, strategic management,project management, leadership, etc. ), to facilitate the decision making process while
dealing with complex problems; Develop and practice a range of learning approaches (project-based, cases study
analysis, problem solving and self-reflective learning);
Appreciate learning experiences from ongoing activities in a multicultural groupcontext (i.e. working groups including students from different cultures/countries);
Appreciate the importance of embracing appropriate professional Code of Ethics;
Demonstrate interpersonal skills, group interaction skills, and both critical andcreative thinking through group work and case discussions;
Demonstrate written and oral communication skills through assignments and groupdiscussions and presentations;
Demonstrate an ability to critically analyse a real world project;
Demonstrate an ability to locate, evaluate, manage and use relevant information; Demonstrate an ability to critically read and analyse real world case studies;
Demonstrate through written examination, effective knowledge of sustainable projectmanagement principles and theories.
Learning activities that support the learning outcomes
Lecture and tutorial attendance and active tutorial participation;
Presentation, writing and submission of a real world group project;
Final examination;
Guided independent reading; Use of electronic databases and literature resources.
8/12/2019 Unit Outline, Semester 2, 2013
8/21
- -8
TEXTBOOK AND RESOURCES
Textbook
Required text: Hartley S., 2009, Project Management: Principles, Processes andPractice, 2
ndedition, Pearson Education Australia
Other resources
Weekly readings, lecture notes and other relevant material will be made available on LMS.
Other resources & reading material (but not limited to)
Academic Journals
Asian Business & Management
Environmental Impact Assessment Review
Harvard Business Review
Impact Assessment and Project Appraisal
International Journal of Logistics
International Journal of Project Management
Journal of Business Ethics
Journal of Cleaner Production
International Journal of Technology Management & Sustainable Development
Journal of Product Innovation Management Journal of Project Management
Strategic Management Journal
Business Periodicals
Australian Financial Review
Business Review Weekly
Business Week
Fortune
It cannot be over-emphasised how important it is to read widely
8/12/2019 Unit Outline, Semester 2, 2013
9/21
- -9
TEACHING AND LEARNING RESPONSIBILITIES
Teaching and learning approachesThis course is divided in two parts. The first part of the course will run for eight weeks and
includes weekly lectures and tutorials. The lectures provide a summary of core concepts andtheories of sustainable project management and their application. They will summarize key
concepts and theories found in the text, but will also add further information not included inthe text. This means that the text is important in providing examples and discussion on the
core concepts and theories, but it is not a substitute for the lectures. These concepts andtheories will then be applied to project management settings through class discussions of theassigned weekly case studies during tutorials.
A major written group project will be completed in this first part of the unit to allow studentsto apply sustainable concepts and theories to a real project management scenario. The groupproject will be regularly discussed during tutorials, and students are required to present theirchosen project either in week 7 or 8.
The second part of the course, which will run for four weeks is comprised of eight lectures(two per week) and four tutorials (one per week). The lectures will, firstly, introduce you tothe main normative ethical theories (and frameworks) and how they apply to a variety ofproject management scenarios. Secondly, the lectures will focus on ethical issues specific toprofessional life, including a discussion of the benefits and limitations of professional codesof ethics, and other important aspects of professional ethics. For this part of the course,students are required to submit a written group report founded on a thorough application ofthe relevant ethical theories and frameworks studied in the course to a real life project.
A final exam will test students understanding of project management concepts and theories,with a major focus on ethical and sustainable implementation. The final exam will include a
compulsory essay question, and short answer questions which will draw on all topics coveredthroughout the semester. Further details will be provided later in the course.
Use of student feedbackIn accordance with UWA policy you will be invited to complete both a SURF and SPOTevaluation form about this unit. The feedback will facilitate ongoing improvement to the
structure of the course and the delivery. In addition, we encourage you to approach us at anytime if there is something that we can do to make your learning more beneficial.
Charter of student rights and responsibilitiesThis Charter of Student Rights and Responsibilities upholds the fundamental rights of
students who undertake their education at the University of Western Australia. It recognisesthat excellence in teaching and learning requires students to be active participants in theireducational experience. It upholds the ethos that in addition to the Universitys role ofawarding formal academic qualifications to students, the University must strive to instil in allstudents independent scholarly learning, critical judgement, academic integrity and ethicalsensitivity. Please refer to the guild website the full charter of student rights, located athttp://www.secretariat.uwa.edu.au/home/policies/charter
UWA Student Guild contact detailsPhone: (+61 8) 6488 2295Website:http://www.guild.uwa.edu.au
http://www.secretariat.uwa.edu.au/home/policies/charterhttp://www.guild.uwa.edu.au/http://www.guild.uwa.edu.au/http://www.secretariat.uwa.edu.au/home/policies/charter8/12/2019 Unit Outline, Semester 2, 2013
10/21
- -10
UNIT ASSESSMENT
This unit is divided into two parts.
In the first part of the unit, which runs until the end of week eight (8)students are exposedto the general principles of sustainable project management, while dealing with specific
examples of project applications. Students will be asked on a weekly basis to read a projectmanagement case study and complete a series of questions. These questions will be thesubject of analysis and discussion in the tutorial classes. This will expand studentsunderstanding of the relevant concepts and theories of sustainable project management, andwill assist them with the learning progress over the semester.
Students will also need to work in a group to analyse a realworld project management
scenario and make sound recommendations on how to improve it, based on key concepts andtheories studied in the course. This group work includes submitting a written report, and an
oral presentation of the project (see assessment details below).
In the second part of the unit, commencing in week nine (9), students are exposed to some of
the central ethical theories and ethical issues that may arise in the professional field. Thetutorials will give the students the opportunity to apply what they learn in the lectures tospecific project management cases. Students will work together to discuss case studies andethical dilemmas and develop considered ethical responses to difficult situations. As a group,students will also need to analyse a real world project (and management scenario) and makesound recommendations on how to improve it, based on appropriate ethical theories andframeworks studied in the course. This group work includes submitting a written report (seeassessment details below).
The implementation of these components will contribute towards students ability to complete
the final exam and achieve the learning outcomes of the unit.
Assessment summary
Item Weight Due date
Relates to
learning
outcomes:
Major Group Project:
-Report 30%
-Presentation 15%
45%(of overall unit mark)
Major group project due Monday 9th
September, by 6pm (wk 7). The
electronic copy of the report mustalso be submitted
1, 2, 3, 4, 5, 6
Week 7 and week 8 1, 2, 3, 4, 5, 6
Group project onethics applied toproject management
15%(of overall unit mark)Group report due Wednesday, 16
th
October, by 6pm (wk11).Theelectronic copy of the report mustalso be submitted
7
Final exam 40%(of overall unit mark) Check exam timetable 1, 2, 3, 4, 5, 6, 7
Note: Results may be subject to scaling and standardisation under Faculty policy andare not necessarily the sum of the component parts.
8/12/2019 Unit Outline, Semester 2, 2013
11/21
- -11
Assessment details
Major Group Project (45%)
You will be required to join a group of 6 individuals in your assigned tutorial and to produce
a report of approximately 6,000 words(plus or minus 5%) excluding the executive summary,appendices and references. You will be required to write, analyse, and solve a case studyconcerning a nominated real world project. The project that you nominate to research mustbe agreed upon by me by Wednesday 7
thAugust, 6pm (wk 2).The purpose of this
assignment is to thoroughly investigate the project and provide recommendations based on
the main concepts and theories studied in the course. The group project is divided into two (2)components: a) Oral presentation, and b) Written report.
a) Group presentation (15%)
This will be a 15 minute power point presentation plus 5 minute question time, to begiveneither inweek 7 or 8. All group members are required to participate. You will be assessed on
how clear and concisely you present the facts, analysis and recommendations for yourdesignated project with respect to four (4) key steps of its lifecycle, specifically: 1) Projectconceptualization/initiation; 2) Project planning; 3) Project execution (including monitoring& controlling); and 4) Project finalization. This presentation is worth 15% of the total unitassessment.
b) Written report (30%)
The written report is worth 30% of the total unit assessment, and is due on Monday 9thSeptember, 6pm (teaching week 7). The electronic copy of your project must also besubmitted. Please use times new roman 12 point font, 1.5 spaced lines.
This is a group project and you are expected to encourage each other and foster professionalrelationships that deliver an equitable workload for each group member. I suggest you workto each individualsstrength. YOU are responsible for making YOUR group work. Insituations where group conflict occurs, take active steps to correct it AS SOON ASPOSSIBLE. As you will learn in this course, conflict may occur in team dynamics, andresearch shows that once conflict is resolved it can lead to higher group creativity and betteroutcomes. However, if you are unable to address persisting conflict in your group pleasecome and see me as soon as possible.Marks will be adjusted if group consensus exists that a member DID NOT CONTRIBUTEEQUALLY. This will be based on the RECORD of meetings (refer to section belowgetting
organized for your group meetings), and attendance, and/or medical certificates and dates
when documents were submitted by each group member as evidence of contribution.You should CHOOSE A PROJECT which is OF INTEREST TO YOU. But you need toensure that relevant and reliable information to assess the project can be obtained relativelyeasily. Projects run by companies listed on the Australian Stock Exchange are recommended,
as they publish significant information/reports on their website on a regular basis. Primaryresearch with key management people in your nominated project - e.g. general managers,senior project managers, and project managersas well as project management experts andconsultants, is also recommended.
PLEASE REMEMBER: It is your responsibility to ascertain that sufficient and reliableinformation is available to complete your project satisfactorily.
Lastly and most importantly, REMEMBER to enjoy this project, and learn as much as youcan from your group experience.
8/12/2019 Unit Outline, Semester 2, 2013
12/21
- -12
Objectives of the project
The objectives of this assignment are for students to:
Write a case study on a real world project;
Analyse the case study by focusing on the project management approach in relation tofour (4) key steps of the projects lifecycle;
Provide appropriate recommendations to improve the project outcome, based on thetheoretical concepts and theories studied in the course.
These objectives are to be addressed in three separate sections.
Section A: Case study writingIn addressing this section, students should provide a short background of their chosen project
and present the relevant information and facts - That is, students should report only therelevant information and facts that, in their opinion, are useful for analysing the steps of theprojects life cycle in Section B. As specified earlier, the facts and other relevant informationshould be gathered from reliable sources (e.g. company reports, official publications on theAustralian Securities Exchange (ASX) and information available from other governmentagencies, or primary research carried out with relevant stakeholders, etc.). This section shouldbe approximately 1,500 words, excluding references and appendices.
Section B: Case study analysisIn this section students are required to critically analyse their chosen project in relation to four(4) key project management stages: a) Conceptualization/Initiation, b) Planning, c) Execution
(including monitoring & controlling), and d) Finalization. Based on the facts and otherrelevant information presented in section A, students should:
Identify and analyse the problems encountered in each of these fours stages of theproject lifecycle;
Establish the relevant inferences to be made throughout the various phases of theproject, and why these are relevant inferences;
Identify and analyse differing perspectives on the relevant problems;
Identify and analyse the relevant causes of these problems, and establish why theyhave occurred;
This section should be approximately 2,500 words.
Section C: Recommendations to the caseBased on the facts in Section A and your analysis in Section B, choose appropriate theoriesand conceptual frameworks from the course, and apply these to the four (4) projectmanagement phases identified above. Based on your theoretical application you should beable to:
Provide effective recommendations for each phase of your project on how to preventand/or address the problems (and their causes) uncovered in your analysis;
Prioritise recommendations by considering the potential benefits and consequencesderiving from them.
8/12/2019 Unit Outline, Semester 2, 2013
13/21
- -13
There is no right or wrong answer but marks are given for how well you defend and supportyour arguments with relevant frameworks and theories. Your goal is to provide a convincing
argument, supported by relevant conceptual frameworks and theories as to why yourrecommendations will address the problems and relating causes. This section should beapproximately 2,000 words.
In analysing and solving your case, I encourage you to combine both analytical and creativeproblem solving approaches.
Further details concerning the structure of the written report and the marking guide will beprovided later in the course.
Getting organised for your group meetingsAs part of your group project you will also be assessed on how effectively you manage yourgroup meetings and the outcome you achieve from them. For each meeting, to be chaired by adifferent team member, you need to:
Prepare an agenda, including the list of items to be discussed at that meeting (include
meeting date). Each team member should contribute towards preparing the agenda,which should be circulated early for everyone to pre-plan and attend the meetingappropriately prepared;
Accurately record the discussion and decisions of each meeting and prepare therelevant minutes. The minutes should be prepared immediately after each meeting
and should be relatively brief and focusing on content and decisions that are explicitlylinked to each item on the agenda. The minutes should also include a schedule withthe specific actions to be implemented: Who has to do what, and by when.Each teammember must approve the minutes by reading and signing them, and the chairpersonof each meeting must be clearly specified.
Given that both the agenda and minutes of your meetings are included in the assessable workrelating to your written report, you are required to submit them with your report. Details ofthe assessment weight of this work will be included in the marking guide specified above.
Additional suggestions to improve your meeting individual/group performance: After eachmeeting you should reflect on the following questions: Did the meeting achieve itsobjectives? Was it successful in all aspects? Were there any matters which could have beenhandled better? I suggest you make a note of any issues/problems that you encountered, and
decide how to resolve them to make your next meeting more effective.
END OF MAJOR GROUP PROJECT INFORMATION
Group project on ethics applied to project management (15%)
The purpose of this assignment is to encourage you, as a group, to explore and understandethical issues, which may occur in a real world project and project management context .You will be required to critically review the project you chose for your major group projectabove, and uncover the major ethical issues occurred throughout the four (4) stages of theproject: a) Conceptualization/Initiation, b) Planning, c) Execution (including monitoring &controlling), and d) Finalization. You should then choose appropriate ethical theories andconceptual frameworks from the course, and apply these to the four (4) stages of the projectand provide appropriate recommendations for each stage on how to prevent and/or address theethical issues (and their causes) uncovered in your analysis.
8/12/2019 Unit Outline, Semester 2, 2013
14/21
- -14
The written report is worth 15% of the total unit assessment, and is due on Wednesday 16th
October, 6pm (week 11). It must not exceed 1,500 words exclusive of appendices, executive
summary, table of contents and reference list. The electronic copy of your report must also besubmitted. Please use times new roman 12 point font, 1.5 spaced lines.
Further details regarding the structure of the written report and the marking guide will beprovided later in the course.
END OF GROUP PROJECT ON ETHICS INFORMATION
Before you startYou will be formed into groups in the first tutorial class, and you mustobtain my approval before you (as a group) proceed working on your project. To do this, you
MUST submit a one page summary of your project by email to me by Wednesday 7th
August, 6pm (teaching week 2).In your summary you should identify the following:
The name (family name and one given name only), student number, and emailaddress of all group members and a made up name to identify your group throughout
the semester. Please ensure that your group names are presented in alphabetical order; The tutorial class you have been allocated (i.e. Monday 4pm, Friday 11am, etc.); The name of the project you plan to research and the reasons why; A schedule providing your group objectives and rules including:
What are your objectives as a team?
How will decisions be madei.e. consensus group decision making or other?
When will you start considering the requirements of the final written
projects? What will be the time line for the written reports? Will you assign
tasks to each other, or work collectively or a combination of both?
What happens if someone doesnt complete their tasks?
Will you agree on a time line for set tasks?
How often do you meet? Does everyone need to attend every meeting?
What will happen if someone doesnt attend a meeting?
Tutorial attendance and participation
As part of your continuous learning in this course, you are required to attend weekly tutorials
and participate actively in tutorial activities. As a group you will be required each week toanalyse a short case study relating to topics presented in the lectures and address a number ofquestions. You are then required to identify the relevant concepts of the case, and put them inthe context of your group project. A one (1) page bullet point summary of the key conceptsidentified in the case must be submitted to your tutor, by each group, at the end of eachtutorial. Feedback on the relevant topics will be provided to you at the end of each tutorialclass.
Note that marks will not be allocated for attending tutorials. However, since I regard
your tutorial participation as essential for being able to complete the course
assignments, and achieving the unit learning outcomes, students who miss tutorials
without adequate explanation will incur a penalty (- 2% of the overall unit mark) for
each missed tutorial. This is not negotiable, and if you have any questions in this regardyou should come and talk to me.
8/12/2019 Unit Outline, Semester 2, 2013
15/21
- -15
Final Exam (40%)
The final exam is worth 40% of the total unit assessment and will be two hours and tenminutes in length. It will cover the content of the entire unit, including your group projects.The exam will consist of a compulsory essay question and short answer questions covering all
topics studied throughout the semester. More details of the exam will be provided later in thesemester.
Students MUST sit the final exam during the examination period set aside by the University.
Overall, you must achieve a score of at least 50% to pass this unit. To obtain full marks, ALLwork MUST be handed in on time. Marks will be deducted (5% per day) for latesubmissions. Extensions will not be granted if requested less than two (2) days before the duedate, except in exceptional circumstances.
Failure to complete any aspect of the work required will result in failing to pass the unit.
END OF SPECIFIC ASSESSMENT DETAILS
8/12/2019 Unit Outline, Semester 2, 2013
16/21
- -16
Standard of Assessment
The School of Electrical, Electronic and Computer Engineering (EECE) must ensure that theprocesses of assessment are fair and are designed to maintain the standards of the School andits students. The School follows the University of Western Australias grading system:
HD (Higher distinction) 80-100%D (Distinction) 70-79%CR (Credit pass) 60-69%P (Pass) 50-59%N+ (Fail) 45-49%N (Fail) 0-44%
The School awards marks leading to these grades by using the following general criteriawhich are presented here as a clear indication of the Schools expectations. These general
criteria may be supplemented by specific standards with regard to a particular assignment.
HD The student has a clear understanding of theory, concepts and issues relating to thesubject and is able to adopt a critical perspective. The student is able to clearly
identify the most critical aspects of the task and is able to offer a logically consistentand well articulated analysis within the analytic framework presented in the unit. Thestudent is able to draw widely from the academic literature and elsewhere butmaintains relevance.
D The student has a clear understanding of theory, concepts and issues relating to thesubject. The student is able to develop an analysis of an issue using the analyticframework presented in the unit and is able to identify and evaluate the critical issues.The student is able to draw upon relevant academic and other material.
CR The student demonstrates an understanding of the analytic framework developed inthe unit and a partial understanding of concepts and issues. The student is able toidentify some key issues and is able to present a logical discussion, but with someconceptual errors or gaps between analysis and conclusions. The student is able todraw upon an adequate range of references and other materials.
P The student generally takes a descriptive rather than analytic approach to the subject.The student is able to demonstrate some understanding of the issues involved but
does not demonstrate the ability to apply the analytic framework which had beendeveloped in the unit. Draws primarily upon unit materials for referencing.
N+ The student is unable to demonstrate that he or she understands the core elements ofthe subject matter. The student is able to provide some insight into issues but
misapplies analytic framework developed in the unit, omitting key factors and, forexample, drawing conclusions which are not related to the preceding discussion.
N The student is unable to demonstrate any understanding of the subject matter.
Material presented for assessment is unrelated to unit framework and shows not effortto identify or address critical aspects of the topic.
The scaling of marks to ensure comparability between classes is an acceptable academicpractice. The School and Board of Examiners have the right to scale marks where it isconsidered necessary to maintain consistency and fairness.
8/12/2019 Unit Outline, Semester 2, 2013
17/21
- -17
Supplementary Assessment
Supplementary Assessment is not offered by the School of Electrical and Electronic andComputer Engineering (EECE), however, students who achieve a grade between 45-49 in thelast unit for their undergraduate degree taken in the last semester of study, will be eligible for
a supplementary assessment
Ethical Scholarship, Academic Literacy and Academic Misconduct
Ethical scholarship is the pursuit of scholarly enquiry marked by honesty and integrity.Academic Literacy is the capacity to undertake study and research, and to communicatefindings and knowledge, in a manner appropriate to the particular disciplinary conventionsand scholarly standards expected at university level.
Academic misconduct is any activity or practice engaged in by a student that breaches explicitguidelines relating to the production of work for assessment, in a manner that compromises ordefeats the purpose of that assessment. Students must not engage in academic misconduct.Any such activity undermines an ethos of ethical scholarship. Academic misconductincludes, but is not limited to cheating, or attempting to cheat, through:
Collusion
Inappropriate collaboration
Plagiarism
Misrepresenting or fabricating data or results or other assessable work
Inappropriate electronic data sourcing/collection
Breaching rules specified for the conduct of examinations in a way that maycompromise or defeat the purposes of assessment.
Penalties for academic misconduct vary according to seriousness of the case, and may include
the requirement to do further work or repeat work; deduction of marks; the award of zeromarks for the assessment; failure of one or more units; suspension from a course of study;
exclusion from the University, non-conferral of a degree, diploma or other award to which thestudent would otherwise have been entitled. Refer to theEthical Scholarship, AcademicLiteracy and Academic Misconduct located on the Universitys website athttp://www.teachingandlearning.uwa.edu.au/tl4/for_uwa_staff/policies/student_related_policies/academic_conduct
Acknowledging sources of information
Please PAY SERIOUS ATTENTION to this section.
In the course of your individual and team work assignments, you will encounter ideas frommany sources. All assignments that you submit MUST acknowledge all the different sourcesyou have used. Not to acknowledge your sources is plagiarism. Neither the School nor theUniversity accepts ignorance or the fact that a students previous acts of plagiarism had beenundetected as a defence.
Serious cases of plagiarism shall be referred to the Universitys Board of Discipline. Allstudents should note that cases of copying are reported to the School and documentaryevidence, along with associated correspondence is placed on the students permanent record.
In order to avoid engaging in plagiarism it is YOUR responsibility to acknowledge all of
your sources in any work submitted for assessment and it is essential that you reference thework of others correctly. Where you quote directly from a source, you must ensure that
http://www.teachingandlearning.uwa.edu.au/tl4/for_uwa_staff/policies/student_related_policies/academic_conducthttp://www.teachingandlearning.uwa.edu.au/tl4/for_uwa_staff/policies/student_related_policies/academic_conducthttp://www.teachingandlearning.uwa.edu.au/tl4/for_uwa_staff/policies/student_related_policies/academic_conducthttp://www.teachingandlearning.uwa.edu.au/tl4/for_uwa_staff/policies/student_related_policies/academic_conduct8/12/2019 Unit Outline, Semester 2, 2013
18/21
- -18
any direct quotations are placed in quotation marks and are fully referenced. Even whenyou do not quote directly and are just referring to or expanding on the work of others, you
must still acknowledge the sources of your information and ideas. Each time that text iscopied, the source must be acknowledged with a reference citation, including the pagenumber. Please use the Harvard referencing styleand for guidance on how to use it
correctly please read the notes prepared by the library staff and which are available online:http:/www.library.uwa.edu.au/guides/citingsources/harvard.html
Be specific when you cite relevant sources: i.e. include authors, year of publication and
page numbers throughout your report, and do not use words such as anonymous and/orn.d.. If you still have any doubts regarding correct referencing or how to acknowledgethe work of others correctly, please come and see me.
Appeals against academic assessment
In the first instance, students are strongly advised to talk informally to the lecturer about
the grade awarded. The University provides the opportunity for students to lodge anappeal against any mark which he or she feels is unfair. Any student making an appeal isunder an obligation to establish a prima facie case by providing particular and substantialreasons for the appeal. It is recommended that students contact the Guild EducationOfficers to aid them in the appeals process.
There is a 20 day time limit for making any such appeal. An appeal against academicassessment may result, as appropriate, in an increase or decrease in the mark originallyawarded. The University regulations relating to appeals and the form on which the appealshould be lodged can be found athttp://www.secretariat.uwa.edu.au/home/policies/appeals
http://www.secretariat.uwa.edu.au/home/policies/appealshttp://www.secretariat.uwa.edu.au/home/policies/appeals8/12/2019 Unit Outline, Semester 2, 2013
19/21
- -19
LECTURES, TUTORIALS & ASSESSMENT SCHEDULE
Please note: Topic, lecture sequence, and readings might be subject to change. You will
be advised of any change
Week & date Topic/Lectures
Text chapter
&
additional readings
Tutorial activity
Assessment /
item due
WK 1
29th
Jul
2nd
Aug
Introduction to
GENG5505
An overview of projectmanagement
Ch1
plus
readings on projectlife cycle, impactmanagement &
sustainability
- Introduction oftutorial plan- Team formation,exchange of contactdetails, & discussion
on team rules- Briefing on main
project (objective,format, marks, etc.)- Discussion onpossible projects toanalyse
Deconstructing projectmanagement. Project lifecycle and organization
WK 25
thAug9
th
Aug
Aligning project strategy,governance & portfolio
Ch2 & Ch3
plus
readings on projectvision, strategy and
portfoliomanagement
plus
Stakeholdermanagement and
response tostakeholderpressures
Case study discussion
Ch1 & Ch2
Read case study p. 35 of
text and prepare answers
to case applicationquestions 1 to 8 for class
discussionRead case study p. 59 of
text and prepare answers
to case application
questions 1 to 9 for class
discussion
One page
group
summary
including
project
choice to be
submitted byemail by
Wednesday
7th
August,
6pm (refer to
p. 14 for
more details)
Profiling projectstakeholder expectations.Identifying & mappingstakeholder influence andimpact
WK 3
12th
Aug
16th
Aug
Scoping the project
deliverables: Confirming& documenting the output
Ch4 & Ch5
plus
readings on projectrisk/uncertainty
analysis &management
Case study discussion
Ch3 & Ch4
Read case study p. 85 oftext and prepare answers
to case application
questions 1 to 7 for class
discussion
Read case study p. 105
of text and prepare
answers to case
application questions 1
to 6 for class discussion
Mitigating project risk:From concept through tofinalization
8/12/2019 Unit Outline, Semester 2, 2013
20/21
- -20
Week &
date Topic/Lectures
Text chapter &
additional
readings
Tutorial activity
Assessment
/ item due
WK 4
19th
Aug
23rd
Aug
Developing the projectschedule Ch6 & Ch7
plus
readings on project
planning &
performanceassessment
Case study discussion
Ch5 & Ch6
Read case study p. 138of text and prepare
answers to case
application questions 1to 9 for class discussion
Read case study p. 174
of text and prepare
answers to case
application questions 1
to 10 for class discussion
Project quality: Aligningobjectives, processes &improvements
WK 5
26th
Aug
30th
Aug
Procurement & contracts:Imbedding value into theproject
Ch8 & Ch9plus
readings onnegotiation &
managing conflict,& global project
management
Case study discussion
Ch7 & Ch8
Read case study p. 195
of text and prepare
answers to case
application questions 1
to 8 for class discussion
Read case study p. 215
of text and prepare
answers to case
application questions 1
to 6 for class discussion
Optimising the projectschedule: Revisiting
baselines, iterations, &agreements
WK 6
2nd
Sept
6th
Sept
Working with projectteams: Sustainingcommitment, motivation& urgency
Ch10 & Ch11
plus
readings on projectteam management
& performance
Case study discussion
Ch9 & Ch10
Read case study p. 240
of text and prepare
answers to case
application questions 1
to 8 for class discussion
Read case study p. 268
of text and prepare
answers to case
application questions 1
to 13 for class discussion
Reporting projectperformance:Communicating intent,corrective action &reinforcement
WK 7
9th
Sept
13th
Sept
Finalising the project:Handover, acceptance,achievement & lessonlearned
Ch12
plus
reading on post-
project reviews
Group project
presentationsNo case
discussion
In your own time, read
case study p. 306 of text
(Ch 11) & answers case
application questions 1-6
Major group
project due
Monday, 9th
September,
6pm (30% of
overall mark
for the unit)
GUEST SPEAKER
Group project
presentation
(15% of
overall mark
for the unit)
8/12/2019 Unit Outline, Semester 2, 2013
21/21
WK 8
16th
Sept
20th
Sept Group projectpresentation
N/A
Group project
presentationsNo
case discussion
In your own time, read
case study p. 327 of text
(Ch 12) & answers caseapplication questions 1
to 11.
Group project
presentation
(15% of
overall mark
for the unit)
WK 9
23rd
Sept -
27th
Sept
Ethical issues in businessand project management
Readings on ethics
Case study on ethicsapplied to engineering
(group discussion)
(Case available onLMS)
Moral frameworks:
Ethical theories and howto use them
Study break
WK 10
7th
Oct
11th
Oct
Ethical theories and howto use them....continues
Readings on ethics
Case study on ethicsapplied to
engineering (group
discussion)
(Case available onLMS)
Ethics & professionalism:Moral reasoning and
Codes of Ethics
WK 11
14th
Oct
18
th
Oct
Steps in resolving ethical
dilemmasReadings on cross-cultural business
ethics
Australian Engineers
codes of ethics(group discussion)
(Case available on
LMS)
Group report on
ethics due
Wednesday, 16th
October, 6pm
(15% of overall
mark for the
unit)
Managing Cross CulturalBusiness Ethics
WK 12
21stOct
25th
Oct
Ethical management andleadership
Readings on ethicalmanagement andleadership, andconsumer ethics
Case study on ethicsapplied to
engineering (groupdiscussion)
(Available on LMS)Consumer ethics
WK 13
28th
Oct
1stNov
Exam reviewN/A N/A
Concluding NoteI hope that you find this unit both beneficial and enjoyable. I encourage you to be passionate andexcited about this course, as I believe it will offer you a valuable opportunity to enhance yourprofessional knowledge and abilities leading to a more successful career selection and advancement.If there is anything that I can do to help, please come and see me.
Thank you & best wishes
Cosimo Faiello26
thJuly, 2013