Unit 2Unit 2Using Packet Tracer and Wireshark

What is the assignment for Unit What is the assignment for Unit 2?2?

You will have to download a packet tracer for this lab. On p. 42 of Network Fundamentals: CCNA Exploration Labs and

Study Guide, complete Lab 2-1: Topology Orientation and Building a Small Network, tasks 1-3, and lab 2-2: Using Wireshark to View Protocol Data Units, task 1. Answer all questions as you go. Because most of you only have one PC, construct a small peer-to-peer network in Packet Tracer.

Lab 2.1: ◦ Task 1, skip step 1, use Packet Tracer to create a two-workstation

environment to complete the task. Task 2, research what the color the pins for a straight-through

and crossover cable. Task 3, use Packet Tracer to complete the task. Include a

screenshot for your pings. Lab 2.2: Task 1, install Wireshark before starting this task.

Finish this Unit with step 4 on p. 56. Create a Word document with answers and screenshots.

Using Packet TracerUsing Packet Tracer

Click END DEVICES

Using Packet TracerUsing Packet Tracer

Drag 2 PCs to the work area

Using Packet TracerUsing Packet Tracer

Click the LIGHTNING BOLT to show cable types

Select the correct cable type – copper crossover

Click on PC1 and drag to PC2 to make the connection. Be sure to choose the proper connection interface

Using Packet TracerUsing Packet Tracer

Click on PC1 and get this display

Using Packet TracerUsing Packet Tracer

Click on DESKTOP for this display

Using Packet TracerUsing Packet Tracer

Click IP CONFIGURATION for this display

Insert the correct IP address

Press TAB for the default subnet mask

Click X to closeRepeat for PC2

Using Packet TracerUsing Packet Tracer

Click SIMULATION on the bottom right of the Packet Tracer Screen

Go back to PC1 for this screen. Click COMMAND PROMPT

Execute the PING command

Minimize the COMMAND PROMPT

Using Packet TracerUsing Packet Tracer

Click AUTO CAPTURE/PLAY to watch the data move from one to the other. This is much slower than it really would be. You will see little envelopes move back and forth

Using Packet TracerUsing Packet Tracer

The EVENT LIST shows each packet as it moves back and forth the color codes will help identify them

Take a SCREENSHOT for submission

Using WiresharkUsing WiresharkOpen WiresharkClick capture optionsClick on Interface and select your

network adapterClick capture packets in

promiscuous mode and Click enable transport name resolution

Screen CaptureScreen Capture