solexin SOLUCIONES EXPERTAS EN INCENDIOS

UNIFLEX BOARD LIGHT WEIGHT CEMENT REINFORCED WITH FIBER

TbilisiPublic Service Hall- Tbilisi,Georgia.Estudio Fuksas

BUILDING SOLUTIONS WITH CURVATURE, ADAPT TO DESIGN

REQUIRED BY THE ARCHITECTURE TO GET TO SCULPTURAL FORMS

OUTDOOR DRY CONSTRUCTION SYSTEM

UNIFLEX IS THE ANSWER TO THE REALIZATION OF

PARTICULARLY FLEXIBLE SOLUTIONS.

THIS BOARD IS REINFORCED CEMENT WITH

LIGHTWEIGHT FIBRES, NOT CONTAINS GYPSUM,

CELLULOSE OR ASBESTOS AVOIDING DAMAGE IN

WATER PRESENCE.

IT HAS, THEREFORE, HIGH DURABILITY IN SATURATED

HUMIDITY ENVIRONMENTS, HIGH TEMPERATURES, AND

ALSO IN THE PRESENCE FREEZE CONTINUES.

THE MAIN FEATURE IS THE ABILITY TO ADAPT TO ANY

CURVATURE WITHOUT HAVING TO HANDLE THE

PRODUCT.

BOARDS ADAPT TO ANY SITUATION AND ALLOW ANY

TYPE OF ARCHITECTURE.

flexible cement board without limits for design, innovative and imaginative

UNIFLEX is the perfect board for areas of high curvature, both

outdoors and indoors.

The ease and speed of installation are features of this product.

• The most flexible cement in the market, allows us to be more creative without limits to imagination

• UNIFLEX is Solexin response to demand for construction coatings that require curvature

• Radius of curvature up to 15 cm

• Free of gypsum, cellulose or asbestos

• Dry construction

UNIFLEX board

• Easy and quick to install

extreme curvature

curvature radius of 15 cm

UNIFLEX

2

an exceptional board

UNIFLEX is the first cement board that allows naturally the maximum curvature, simply bending manually! Without breaking or cracking, with a radius of only 15 centimetres.

STEPS:

- BEND BY THE VISIBLE SIDE

- BEND SLOWLY

- CONTROL THE CURVATURE

- FIX

3

UNIFLEX is reinforced cement board 12.5 mm. thick most flexible in the market, able to reach a radius of curvature of 150 mm (90 degree angles) without breaks or cracks, and in a natural way.

Produced in a continuous cycle and obtained from a mixture of Portland cement, and on both sides, front and back, with a layer of fiberglass and polymeric lining, with a layer of fiberglass and polymeric lining, the longitudinal edges are polished, and have a smooth and robust finish thanks to technology EdgeTech®- double coated with mesh and fiberglass tape. The ends (edges of the board) at the top are straight.

It is used for beams and columns linings, arches construction, walls and curved ceilings and in any case in whichever any curved surface is necessary. It offers a sleek and sturdy support for the placement of ceramic linings, glass mosaics and brick linings or stone materials. It can be smoothed with UNIJOINT to obtain a smooth surface, ready to paint.

4

BEAMS AND COLUMNS CLADDING

CONSTRUCTION OF ARCHES

CONSTRUCTION OF WALLS AND CEILINGS CURVED

VAULT AND COLUMN CONSTRUCTION

innovative solution maximum creative freedom

CONSTRUCTIVE CHARACTERISTICS · The UNIFLEX boards of 12,5 mm. guarantee theconstruction of concave or convex surfaces directlyon construction work thanks to ability to bend in drywith a radius of 15 cm.

Heydar Aliyev Center - Baku, Azerbaijan - Zaha Hadid Architects

5

6

UNIFLEX board

maximum flexibility

)

7

WITH CEMENT AND FREE OF GYPSUM AND

CELLULOSE

DRY ASSEMBLING

QUICK INSTALLATION

IT FITS ANY SUPPORT

The UNIFLEX boards do not suffer deterioration in extreme situations. Hence its high durability in moisture saturated environments, high temperatures, as swimming pools, saunas, steam baths; and also in the presence of continuous frost, when the external environment is characterized by very harsh climates.

However, the main feature is the ability to adapt to any creative form... without the need for complex operations of prefabrication or "conformation".

Boards can be adapted to any type of support and allow any architectural form to reach sculptural forms.

Particularly useful to solve, directly in situ, requirements of curved linings without the need for predispositions or moulds for forms of profiles, grooves or arcs.

dry assembly

ease of installation

9

UNIFLEX SYSTEM

TO WALLS CURVES

COATINGS BEAMNS

VAULT AND COLUMNS CONSTRUCTION

Installation does not require sophisticated equipment, the used in dry building systems is enough for the realization of more complex shapes. Easiness and speed of installation are the characteristics of this innovative product.

Boards can be smoothed with the paste on basis of cement UNIJOINT to obtain a smooth surface ready to paint.

UNIFLEX board is the ideal support for mosaics or ceramics in environments characterized by high temperature and humidity, since it is not altered or deformed.

It can withstand shocks, provides excellent static support, is resistant to fungi and bacteria.

UNIFLEX board is classified in class A1 (incombustible) in fire reaction.

10

dry construction

ideal for rehabilitation

11

The flexibility offered by UNIFLEX boards manages buildings that have never imagined before so simply.

There are no systems in the world with this degree of flexibility: UNIFLEX is a unique patented product and the most innovative designers have been experimenting successfully. It offers possibilities for realization unbeatable, with high strength characteristics, it is able, in addition, withstand the weather conditions more adverse, such as high temperatures, high levels of humidity or the presence of continuous frost.

400 mm building curve surfaces directly at work

Tbilisi Public Service Hall - Tbilisi, Georgia - Studio Fuksas

13

1000 mm

Assembly sequence

SIMPLIFLIED CURVATURE

=

AESTHETIC EFFICIENCY

=

DURATION AND STRENGTH

UNIFLEX board allow to solve quickly and effectively all these problems at work related to the construction of surfaces or curved fittings, which often it produces slowdowns and difficulties of realization.

Arcs, curves, vault and columns have never been so easy to build without the need of superstructures with high cost or external supplies. In fact, it is possible to use standard profiles for solutions of great interest both from an aesthetic and functional point of view, and, especially in rehabilitation, where existing structures are adapted to receive pipelines of installations and ducts.

The special composition of the UNIFLEX boards also guarantees the solidity and stability in time of the product, that they are unalterable to moisture, fungi or bacteria and therefore particularly suitable in those situations where it is essential to keep the environment constantly clean.

prodotti dacostruzione la marcatura CE

16

1)

Fixing the conduct to the upper or lower slab with metal stoppers.

assembly phase

curve construction

The studs should be placed in one direction for half of the curve and in the opposite direction in the other half. For the construction of partition walls, stagger the vertical joints of the boards of at least two studs with respect to the vertical joints of the plates located on the opposite side. The outer face of the structure is indicated on the board.

x

r

CONCAVE CURVE

r ≤ 50 cm x ≤ 15 cm r ≤ 90 cm x ≤ 20 cm r ≤ 120 cm x ≤ 30 cm

CONVEX CURVE

r ≤ 50 cm x ≤ 20 cm r ≤ 90 cm x ≤ 30 cm

WALL

r ≤ 50 cm x ≤ 15 cm r ≤ 90 cm x ≤ 20 cm r ≤ 120 cm x ≤ 30 cm

Placement of vertical main steel structure Depending on the radius of curvature (see figures)

Board fixation to the vertical main steel structure using screws self- drilling.

Previous joint lining with UNITAPE tape and smoothing with paste and placement of UNIROLL fiberglass mesh.

17

4) 3) 2)

18

x

i= 1000 mm

assembly phase

realization of an idea

UNIFLEX boards find their ideal use in those architectural situations free of traditional schemes. They are especially used in contemporary architectural interventions where constructive flexibility is an indispensable condition. Its flexibility allows to satisfy any design idea. Easy to handle and adapt, optimum to mount in a solid way and ensure more curvilinear forms.

To achieve convex curves (A), as the lining of a column, fixing the board to the main steel structure must be performed from its vertical side, screw with the appropriate self-tapping screws, and forming the sheet to the support structure, which are fixed below the successive main steel structure.

In the case of lining a structure with the concave curvature (B), the board must be initially placed in the centre of the curve and fixed to an appropriate main steel structure. Later adapt the board to the realization of the structure and fix it in direction to the exterior sides of the board.

To attach the vertical main steel structure, look at the diagram on the previous page. For lightweight supports carpentry structures, placing the crosspiece to a maximum distance of 1000 mm.

19

B

UNIFLEX

IT ADAPTS TO ANY CURVE

DOESN’T BREAK

DOESN’T CRACK

CUT WITH A CUTTER

TECHNICAL DATA VALUES

Thickness 12,5 mm Width 1200 mm

Length 2000 mm

weight 14,2 kg/m2

Linear tolerances + /- 3 mm Thickness tolerances + /- 0,8mm

Squadro Right angle Depth of the longitudinal joint 1,5 mm

Scratch resistance >850 NImpact resistence Any damage

Linear thermal expansion 0,013 mm/C°/m

Thermal conductivity 0,39 W/mC°

Water vapor transmission 1975 g/h m2

Water vapor permeability μ 54

Bacteria resistance 0 (no growth)

Fungi resistance 0 (no growth)

Fire reaction A1 (incombustible)

Radius of curvature 15 cm

Brands and trade names are exclusive property of their respective owners.

20

METALLIC PROFILE

They are the supportive profiles of the boards. Metallic profiles for building walls, false ceilings, cladding walls and ventilated facades. All profiles are steel- coated by hot zinc alley immersion.

Manufactured according EN 10142 standard. Variable measures depending on the specific applications.

Unifix system board´s accessories

ACR IJOINT

Thick acrylic lining of colored paste suitable for UNIPAN and UNIFLEX boards applications. Based on acrylic resin emulsified, with quartz sand and titanium oxide.

High resistance to light and alkaline effects.

• Self drilling • Countersunk head

UNIVIS

Corrosion-resistant screws, specific to the fixingboards:

Resistance to saline fog1500hours. 4.2 mm thick. Lengths of 32 and 41 mm.

• Tip of nail for thickness up to0,8 mm andwood.

• Weight: 70 gr/m² • Mesh Size: 2,2 x 2,2 mm.

UNITAPE

Glass fiber reinforcement for joints between boards UNIPAN® and UNIFLEX®. Roll: of 75 mm. wide and 50 m long.

EN - ISO 13934-1

Attraction strength: 900 N/50 mm.

• For interior / exterior use • Teks Point for profiles • Auto clamping fins under with thickness from 0.7 • Elongation: 4.5% · his head mm to 2 mm.

UNIJOINT

Cement paste made with single component to be used for treating joints and for complete straightening of UNIPAN and UNIFLEX board

TYVEKº

Glass fiber reinforcement for joints between boards UNIPAN® and UNIFLEX®.

Roll: 1,5m height and 50 m length.

1) Uniflex board fixed withUnivix screws.

2) Unijoint paste forsmoothing.

3) Uniroll net in fiberglass.

fini

Available in the following finish: · Normal · Rustic

Assures extremely smooth

UNIJOINT EXTRAFINE WHITE Paste-based cement mixed with resins. Singlecomponent to be used in treatment of joints and smoothing full boards UNIPAN® and UNIFLEX®.

UNIROLL

Net of alkali- resistant fiberglass for the reinforcement of UNIPAN® and UNIFLEX® boards.

EN - ISO 13934-1

Roll: of 1,10 m. wide and 50 • Tensile strength: 2100 /N 50 mm. 4) Unijoint paste for joining.5) Unijoint paste for final

smoothing.6) Acrylic lining of Unijoint

finish.

and pleasant finish. WHITE COLOUR. 25 Kg sacs.

m. long. • Weight: 160 gr/m² • Mesh size: 4 x 4,5 mm

• Elongation: 3,8%

21

solexin

CENTRAL OFFICES Soluciones Expertas en Incendios, S.L C/ Menéndez Pidal 43, Edificio B.2• Planta 28036 Madrid - España Telf. 0034 91 368 51 20

info@solexin.es www.solexin.es

General information: Europe/Africa marketing@Solexin.es

General information: Latinoamerica / Arabic countries internacional@solexin.es