Upload
aircooledbugbyt
View
222
Download
0
Embed Size (px)
Citation preview
8/9/2019 Uniden tru8885-2
1/96
TRU 8885
SERIES
OWNER'S
MANUAL
8/9/2019 Uniden tru8885-2
2/96
ContentsWELCOME/FEATURES 2
TERMINOLOGY 3
CONTROLS & FUNCTIONS 4
DISPLAY AND ICONS 6SOFT KEY FUNCTION 8
GETTING STARTED 9Setting up the Phone 9Mounting the Base Unit on a Wall 13Main Menu Options 15Setting Menu Options 16
BASICS 33Making and Receiving Calls 33Flash and Call Waiting 34Placing a Call on Hold 34Redialing a Call 35Adjusting the Earpiece and Speaker Volume 37Do Not Disturb (DND) 37Mute Microphone 38
Tone Dialing Switch-over 39Traveling Out of Range 39Privacy Mode 403 or 4-Way Conferencing 40
PHONEBOOK 42Phonebook (Storing Phone Numbers, Names,Distinctive Rings and Speed Dial) 42Chain Dialing 43St f E t i N d S i l Ch t 44
Deleting a Caller ID MessagUsing the Caller ID MessageCall Waiting Deluxe Feature
THE INTEGRATED A
The Integrated Telephone ATurning the Answering SystSetting your outgoing messUsing the Answering SetupNew Message LEDUsing your Answering SysteRemote Operation
EXPANDING YOUR PExpanding Your PhoneConnecting the ChargerRegister the HandsetUsing DirectLink ModeIntercom/Call Transfer Feat
ADDITIONAL INFORChanging the Digital Secur
Find HandsetInstalling the BeltclipHeadset InstallationNote on Power SourcesMaintenanceGeneral Information
TROUBLESHOOTINTroubleshootingLi id D
8/9/2019 Uniden tru8885-2
3/96
Congratulations on your purchase of the Uniden Multi-Hantelephone. This unit is different from conventional cordlesunit is connected to AC power and a telephone line, it can
You can now place a fully-featured cordless handset anywhwhere AC power is available to connect the handset chargeyou to establish a 4-way conference call among 2 handsetsan outside line.Note: Some illustrations in this manual may differ from th
purposes.
As an Energy Star
Partner, Uniden has determined that this prodmodels meets the Energy Star guidelines for energy efficiency.
Energy Star is a U.S. registered mark.
5.8GHz Digital Expandable Integrated Answering Device Dual Keypad with LCD Screen at Base
10 Multi-Handset Expandability Hands-Free Speakerphone in the Handset and Base Caller ID/Caller ID on Call Waiting (subscribe through loca Call Waiting Deluxe (subscribe through local telephone com 100 Programmable Memory Locations Trilingual Display Options and Voice Prompts (English, Fren Intercom/Call Transfer Between Handsets
20 Di ti ti Ri O ti (10 i t d 10 l d
Welcome
Features
8/9/2019 Uniden tru8885-2
4/96
This series featuresAutoTalk and AutoStandby. AutoTalk allows you to anthe handset from the cradle so you don't have to waste time pushing button
hang up by simply returning the handset to the cradle.
To protect you against mis-billed calls that might result from your phone beequipment, this series has Random Code digital security, which automaticapprox. 65,000 digital security codes for the handset and base.
Digital Spread Spectrum Technology uses a wider frequency band than standaresult is a more secure conversation with the clarity of digital sound, extendinterference from other cordless phones.
IntegriSound Built in sound quality which provides life-like conversations
With DirectLink mode, you can use 2 or more handsets as radio transceive
Be sure to visit our web site: www.uniden.com
Uniden is a registered trademark of Uniden America Corporation.AutoTalk, AutoStandby, DirectLink, IntegriSound and Random Code are trade
Terminology
8/9/2019 Uniden tru8885-2
5/96
Controls & Functions
1. Handset Antenna2. Beltclip Hole3. Speakerphone Speaker and Ringe4. Handset Battery Compartment5. New Message LED6. Handset Earpiece7. LCD Display8. softKeys (P. 8)9. cid/vol/ (volume up) (P. 37 &10.redial/p/vol/ (volume down) 11.*/tone/< (P. 39 & 44)12.speaker(P. 33)13.intcom/hold(P. 71 & 34)
14.Headset Jack Cover15.talk/flash (P. 33 & 34)16.end(P. 33)17.phonebook(P. 42)18.#/> (P. 44)19. (Message) (P. 65)
H d Mi h
2
1
4
3
5
6
7
89
10
11
1213
20
21
15
18
19
16
17
14
Retrieve TAD messagewith Handset Remote keys
8/9/2019 Uniden tru8885-2
6/96
25
26
24
33
34
3130292827
40 4122 23 32
36
37
38
39
35
22. In use LED23. play/stop (P. 59)24. cid/exit(P. 51)
Ch
30. do not disturb (P. 37)/DND LED31. /tone (P. 39)32. Message Counter Display
f K ( )
38.fl39.(P. 37
8/9/2019 Uniden tru8885-2
7/96
Display and IconsExample of the standby mode display
Handset
Base
* appears if you have a new message.
appears if you turn your answering system off.
** appears when the message storage is full.
appears if you set your answering system to announce only.
ICON Appears During DESCRIPTION
Standby/TalkBattery icons indicate the handset battery status
h b ( l di d f ll)
Ringer off icon (when the ringer is off)/ day of the wHandset ID and BannerNumber of new Caller ID calls received (If there are nthe Handset ID appears here.)
* Status of yourAnswering machine
** Number of message
Day of the week an
Number of new Calle
8/9/2019 Uniden tru8885-2
8/96
8/9/2019 Uniden tru8885-2
9/96
Soft Key Function"Soft" keys are keys that change function during the operation of the phone
the base and three on each handset.
The function of each soft key is determined by the icon that appears directlythe base is in standby mode, pressing soft key 1 will redial the last number.mode, pressing soft key 1 will mute the microphone.Complete information on the features controlled by the soft keys can be fou
In standby modeHandset Base
In talk modeHandset Base
Soft key 2
Soft key 1 Soft key 2 Soft key 3
8/9/2019 Uniden tru8885-2
10/96
Setting up the Phone
A. Choose the best locationWhen choosing a location for your new phone, here areyou should consider:
The location should be close to both a phone jack and a cwhich is not connected to a switch).
For maximum range:
Keep the antenna freeof obstruction.
When the handset isnot in use place the
handset in an uprightposition.Do not hold thehandset where youwould block the signal.
note
Correct
8/9/2019 Uniden tru8885-2
11/96
B. Install the rechargeable battery pack into the handsetcharge for at least 15-20 hours before using!The handset is powered by a rechargeable battery pack. The battery rechargautomatically when the handset is placed in the base unit. To maximize the capacity of your battery pack, DO NOT plug the telephone cord into the baseand wall jack until the battery is fully charged.
1) Press down on the handset battery case cover (use thefinger indention for a better grip) and slide the coverdownward to remove.
2) Turn the battery pack so that the connector with the redand black wires is near the jack inside the batterycompartment. Match the connector's wire colors to thepolarity label in the battery compartment (the connectornotches fit into the grooves of the jack only one way).
Push the battery pack connector into the jack until itclicks into place.
3) Make sure you have a good connection by gently pulling onthe battery wires. If the connection is secure, the batteryjack will remain in place.
4) Place the battery case cover back on the handset and slide
8/9/2019 Uniden tru8885-2
12/96
Low battery alertWhen the battery pack is very low, the phone is prograin order to save power.
The battery pack needs to be charged when:- The empty battery icon appears.- Low Battery appears in the display.If the phone is in standby mode, none of keys willoperate. If you are on a call, complete your conversatio
return the handset to the cradle.
Cleaning the battery charging contactsTo maintain a good charge, it is important to clean thecharging contacts on both the handset and the base
unit once a month. Using water only, dampen a clothto clean the charging contacts. Then make sure to goback over the charging contacts with a dry clothbefore returning the handset to the base to charge.
Caution: Do not use paint thinner, benzene, alcohol,
Even when the batterypack is not being used,it will graduallydischarge over a longperiod of time.
For optimum performance,be sure to return thehandset to the base unitafter each telephone call.
note
8/9/2019 Uniden tru8885-2
13/96
C. Connect the base unit1) Connect the AC adapter to the DC IN 9V jack and to a
standard 120V AC wall outlet.
Connect the AC adapter to a continuous power supply(i.e., an outlet that is not controlled by a switch).
2) Set the base on a desk or tabletop, and place thehandset in the base unit.Place the base unit close to the AC outlet so that
you can unplug the AC adapter easily.
3) Make sure that the charge LED illuminates.If the LED does not illuminate, check to see that theAC adapter is plugged in and the handset makesgood contact with the base charging contacts.
After installing the battery pack in the handset,charge your handset for at least 15-20 hours beforeplugging into the phone line.
4) Once the handset battery pack is fully charged,connect the telephone line cord to the TEL LINE jack
8/9/2019 Uniden tru8885-2
14/96
Mounting the Base Unit on a WalStandard wall plate mounting
This phone can be mounted on any standard wall plate
1) Make the AC adapter and the telephone line cordthrough the hole on the wall mount adapter.
2) Plug the AC adapter into the DC IN 9V jack.3) Plug the telephone line cord into the TEL LINE
jack.4) Slide the wall mount adapter into the notches on
the base.5) Plug the AC adapter into a standard 120V AC wall
outlet. Hook the cord on the notch of the wall
mount adapter.
6) Plug the telephone line cord into the telephoneoutlet. Hook the cord on the notch of the wallmount adapter.
7) Align the mounting slots on the base with the
DO NOT use an AC outletcontrolled by a wallswitch.
!
8/9/2019 Uniden tru8885-2
15/96
Direct wall mountingIf you don't have a standard wall plate, you can mount your phone directly wall. Before doing this, consider the following:
Avoid electrical cables, pipes, or other items behind the mounting location that ccause a hazard when inserting screws into the wall.
Try to mount your phone within 5 feet of a working phone jack to avoid excessive Make sure the wall material is capable of supporting the weight of the base and h Use #10 screws (minimum length of 1 & 3/8 inches) with anchoring devices suitab
the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall (with theirappropriate anchoring device), 3 & 15/16 inchesapart. Allow about 1/8 of an inch between the walland screw heads for mounting the phone.
2) Refer to steps 1 through 7 on page 13 to mount thetelephone.
8/9/2019 Uniden tru8885-2
16/96
Main Menu OptionsYour phone has seven main menu options: DirectLink
Handset Setup, Base Setup, Answ. Setup, Global Setcan change Room Monitor, Answering Setup, and Globase or from any handset. DirectLink Mode, HandsetSonly available from a handset. Base Setup is only avai
Default Settings
The default settings set from the factory match the feaYou may not need to change them. However, there aremust set and entries you must make in memory to takephone features. The table below lists the default settin
Function Handset Base Function Hand
Ringer Tone Flicker Day & TimeRinger Volume High CW / CWDX C
Distinctive Ring On - Dial Mode
Auto Talk Off - Area Code Non
Anykey Answer Off - Security Code
Banner - Record Time
For Global Setup,Answ. Setup, andDeregister HS menuoptions, make surethe line is not in useand the handsets arewithin range of thebase.
For a flow chart ofthe main menu, seepage 90.
note
8/9/2019 Uniden tru8885-2
17/96
Setting Menu Options
Entering the Menu
1) In standby mode, press the MENU soft key.2) Use volume up/down to move the pointer to a desired
main menu (DirectLink Mode, Room Monitor, HandsetSetup, Base Setup, Answ. Setup, Global Setup, andDeregister HS).
3) Press the OKsoft key to select the desired main menu.To return to the previous screen, press the BACKsoftkey.
4) Use volume up/down to select a desired submenu andthen press the OKsoft key to enter.
5) In the submenu option, use volume up/down to select
an item. Press the OKsoft key to confirm yourselection. For detailed instructions, see the followingsections for the desired submenu option. To return tothe previous screen, press the BACKsoft key.
6) To exit the menu, press endon the handset or cid/exiton the base.
Handset
Base
8/9/2019 Uniden tru8885-2
18/96
DirectLink Mode (Handset only)
In DirectLink mode, a pair of handsets can function as
Mode allows two handsets to communicate with each oa telephone line. Use them at sporting events or whilewith family members or friends. You must set both hanactivate this feature.
Using DirectLink Mode1) Enter the DirectLink Mode menu. To enter DirectLin
mode press [ENTER] appears.2) Press the ENTER soft key to enter the DirectLink Mo
You will hear a confirmation tone, and DirectLink MoComplete appears.
3) To return back to the normal mode, press the CANCEsoft key and then the OKsoft key, or return the handto the cradle.
You must have at leasttwo handsets to useDirectLink Mode.
note
8/9/2019 Uniden tru8885-2
19/96
Room/Baby Monitor
This feature allows you to monitor
sounds in another room. Place the baseor a handset in the room you wish tomonitor; it will function as amicrophone. A second handset can beset to function as a remote speaker,allowing you to monitor sounds in the
room.
Using Room/Baby Monitor1) Enter the Room Monitor menu (see
"Entering the Menu" on page 16).Listen to; appears.
2) Select the handset or base you wantto monitor by using volume up/down.
3) Press the OKsoft key.Monitoring appears, and you hear sounds in the roomwhere the handset or the base is installed.
Monitor usinghandset orbase unit
8/9/2019 Uniden tru8885-2
20/96
Handset Setup / Base Setup
The following submenu options must be set separately
base.
Selecting a Ringer Volume
Ringer volume lets you choose from one of three ringe
From the handset1) Press the MENU soft key. Select the Handset Setup
Volume submenu.2) Press volume up/down to select HIGH, LOW, or OFF.3) Press the OKsoft key. You will hear a confirmation
From the baseIn standby mode, press volume up/down to select one Low, or High).
Selecting a Ringer Tone (Handset only)Ringer tone lets you choose from 10 ringer tones or 10
8/9/2019 Uniden tru8885-2
21/96
1) Enter the Handset Setup menu, and then the RingerTones submenu (see "Entering the Menu" on page 16).
2) Press volume up/down to move the pointer. You will
hear the ringer or melody as you scroll through theoptions.
3) Press the OKsoft key. You will hear a confirmation tone.
Distinctive Ringer Setup (Handset only)
Distinctive Ringer allows you to assign a designated ring tone to a storedphonebook number. When a call is received and the Caller ID information mathe information in one of the phonebook memory locations, the phone usesdistinctive ring assigned to that particular Caller. You can assign distinctiveto multiple phonebook memory locations. Switching the setting to Distinctidisables distinctive ringing: all incoming calls will have a normal ring tone.Switching to Distinctive On activates all programmed distinctive ring memolocations.
1) Enter the Handset Setup menu, and then the Distinct.Ring submenu (see "Entering the Menu" on page 16).
On Off
8/9/2019 Uniden tru8885-2
22/96
Setting the AutoTalk (Handset Only)
AutoTalk allows you to answer the phone simply by rem
cradle. You do not have to press any buttons to answe
1) Enter the Handset Setup menu, and then the AutoTasubmenu (see "Entering the Menu" on page 16).
2) Press volume up/down to select On or Off.3) Press the OKsoft key. You will hear a confirmation
tone.
Setting the Anykey Answer (Handset only)
Anykey Answer allows you to answer the phone by pres
*/tone/ on the handset.
1) Enter the Handset Setup menu, and then the AnykeyAnswer submenu (see "Entering the Menu" on page 1
2) Press volume up/down to select On or Off.3) Press the OKsoft key. You will hear a confirmation ton
8/9/2019 Uniden tru8885-2
23/96
Setting the True Banner (Handset only)
True Banner lets you customize the name your handset displays.
The name will be displayed on the LCD screen during Standby Mode, IntercoIntercom Hold, Room Monitor and Copy Phonebook operation. The banner nabe displayed on the receiving handset as well.
1) Enter the Handset Setup menu, and then the Bannersubmenu (see "Entering the Menu" on page 16).
2) Use the number keypad (0-9), */tone/, or theDELETE soft key to enter or edit the name.3) Press the OKsoft key. You will hear a confirmation
tone.
Selecting a Language
Language selects which language the menu display will use. Choose from EnFrench, or Spanish.
1) Enter the Handset Setup or the Base Setup menu, andthen the Language submenu (see "Entering the Menu"
8/9/2019 Uniden tru8885-2
24/96
Adjusting the LCD Contrast
Contrast adjusts the handset LCD brightness. Choose o
optimum viewing.
1) Enter the Handset Setup or the Base Setup menu, anhandset) or the Contrast (for base) submenu (see "Epage 16).
2) Press volume up/down to adjust the contrast of the
3) Press the OKsoft key. You will hear a confirmation
Setting the Key Touch Tone (Handset only)
Key Touch Tone is the tone your keypad makes when kethis tone on or off.
1) Enter the Handset Setup menu, and then the Key ToTone submenu (see "Entering the Menu" on page 16
2) Press volume up/down to select On or Off.3) Press the OKsoft key. You will hear a confirmation
8/9/2019 Uniden tru8885-2
25/96
Setting the Animation Screen (Handset Only)
The Animation Screen displays animation on the handset LCD (see page 7).
animations will be displayed on the LCD screen during a call, ringer volume spaging operation, when you hang up and so on.
1) Enter the Handset Setup menu, and then the AnimationScreen submenu (see "Entering the Menu" on page 16).
2) Press volume up/down to select On or Off.
3) Press the OKsoft key. You will hear a confirmationtone.See "Animation Displays (Handset only)" on page 7 for all the available scre
Answering System Setup
This main menu option allows you to set up the built in answering device.
Record a Personal Outgoing Message (Base Only)
Record Greeting allows you to record a personal outgoing message (greetingthe answering system automatically plays when you receive a call.
8/9/2019 Uniden tru8885-2
26/96
3) Position yourself near the base microphone and reco4) When you are finished recording, press the STOP sof
playback for confirmation.
Selecting Your Greeting (Base only)
Select Greeting allows you to choose between the two recorded message or your own greeting.
1) Enter the Answ. Setup menu, and then theSelect Greeting submenu (see "Entering theMenu" on page 16). Play back greetingappears, and the current outgoing message isplayed. LCD is an example if you recorded your gree
2) Once you have recorded a personal greeting, press t
choose the greeting. The selected outgoing messagepress the CHANGE soft key, the phone switches the the prerecorded and the personal outgoing message
Setting a PIN Code
8/9/2019 Uniden tru8885-2
27/96
3) Press the OKsoft key. You will hear a confirmation tone.
Setting the Ring Time
Ring Time allows you to set the number of rings the caller hears before youanswering system plays the outgoing message. You can set the ring time to after two, four, or six rings. If you enable the Toll Saver (TS), the answering picks up after two rings if you have new messages and after four rings if thenone.
1) Enter the Answ. Setup menu, and then the Ring Timesubmenu (see "Entering the Menu" on page 16).
2) Press volume up/down to select a Ring Time (TollSaver, 2 Times, 4 Times, or 6 Times).
3) Press the OKsoft key. You will hear a confirmation tone.
Setting the Record Time
Record Time sets the duration for recording the incoming messages. You havrecord time options. The options "1 minute" or "4 minutes" set the durationrecording the incoming messages. "Announce only" answers the call but pre
8/9/2019 Uniden tru8885-2
28/96
Setting the Message Alert On or Off
Message Alert sounds an alert tone when you have an
the Message Alert on, the alert tone will sound every 1message is received.
1) Enter the Answ. Setup menu, and then the MessageAlert submenu (see "Entering the Menu" on page 16
2) Press volume up/down to select On or Off.
3) Press the OKsoft key. You will hear a confirmationtone.
Turning the message alert tone off by pressing any To quickly turn off the Message Alert tone, press any kewill automatically deactivate.
Turning the message alert tone off from a remote loWhen all new messages are played back using the remopages 63 to 66), the Message Alert tone will automaticnot deactivate until all new messages are played back.
8/9/2019 Uniden tru8885-2
29/96
Setting the Language of your Answering System
Language allows you to set the language of your answering system announc
to English, French, or Spanish.
1) Enter the Answ. Setup menu option, and then theLanguage submenu (see "Entering the Menu" onpage 16).
2) Press volume up/down to choose English, Fran ais
(French), or Espa ol (Spanish).3) Press the OKsoft key. You will hear a confirmation tone.
Setting the Call Screen
Call screen allows you to listen to an incoming call before answering.
1) Enter the Answ. Setup menu and then the Call Screensubmenu (see "Entering the Menu" on page 16).
2) Press volume up/down to select On or Off.3) Press the OKsoft key. You will hear a confirmation
8/9/2019 Uniden tru8885-2
30/96
Global Setup
If you change one of the global settings, you change t
handsets. Only one handset can change global settings
Setting Day and Time
Day & Time sets the day and time of your display.
1) Enter the Global Setup menu, and then the Day & Timsubmenu option (see "Entering the Menu" onpage 16). Image is for the base.
2) Press volume up/down to select the day of the weeand then the soft key.
3) Press volume up/down to set hour, and then press t4) Press volume up/downto set minute, and then pres5) Press volume up/down to choose AM or PM, and then
will hear a confirmation tone.
Any changes to theglobal settings menuaffect all registeredhandsets and the base.
For setting the Day and
Time, the idle time-outis extended to 2minutes.
note
8/9/2019 Uniden tru8885-2
31/96
Setting CIDCW (Caller ID on Call Waiting)
CIDCW sets the Caller ID on Call Waiting (CIDCW) displays the name and num
an incoming call while you are on the line. Call Waiting Deluxe (CWDX) allowto handle call waiting calls in seven different ways.
1) Enter the Global Setup menu, and then the CIDCWsubmenu (see "Entering the Menu" on page 16).
2) Press volume up/down to select CW On/CWDX On, CW On/
CWDX Off, or CW Off/CWDX Off, and then press the OKsoft key. You will hear a confirmation tone.
Setting the Area Code
If you enter a 3-digit area code number in the "Area Code" option, your loc
code does not appear in the Caller ID message. For calls received from outsidlocal area code, you will see a full 10-digit number.
1) Enter the Global Setup menu, and then the Area Codesubmenu (see "Entering the Menu" on page 16).
2) Press the number keypad (0-9) to enter a 3-digit area
8/9/2019 Uniden tru8885-2
32/96
8/9/2019 Uniden tru8885-2
33/96
8/9/2019 Uniden tru8885-2
34/96
Making and Receiving CallsThis handset has a built-in speakerphone that allows youhave a hands-free conversation. This feature allows you tocommunicate while performing other tasks, such as cooki
appears on the display during hands-free conversation
You can easily switch a call fromnormal conversation to hands-freeconversation. To switch a call,pressspeakerduring the call.
From the Handset
Normal conversation Hands-free convers
To answer a call
Handset On the CradlePick up the handset (AutoTalk is:
on) or pick up the handset and presstalk/flash (AutoTalk is: off).
Handset Off the CradlePress any number key,*/tone/ (Any Key Answer), or presstalk/flash.
Handset Off the CradlPressspeaker.
Handset Off the Cradle1) Press talk/flash.
Handset Off the Cradl1) Pressspeaker.
To set "AutoTalk", seepage 21 or to set"Anykey Answer" seepage 21.
The handset
microphone is locatedat the bottom of thehandset (see "Controlsand Functions" onpage 4). Positionyourself as near to thehandset as possibleand speak clearly.
If the line is in use byanother handset(s),"Line In Use"appears in the base'sdisplay, and "InUse"appears in the displayof all registered
note
8/9/2019 Uniden tru8885-2
35/96
Flash and Call WaitingIf you have Call Waiting service and a call waitingtone sounds while you are on a call, press talk/flashon the handset orflash/find hs on the base to acceptthe waiting call. There is a short pause, and then youwill hear the new caller. To return to the originalcaller, press talk/flash on the handset orflash/findhs on the base again.
Placing a Call on Hold
1) During a call, press intcom/holdon the handset orintercom/holdon the base. The call will be put onhold (image is for the base).
If you leave a call on hold for more than 10 seconds, the base display screen wil
Line On Hold and handset display screen will read Hold.
8/9/2019 Uniden tru8885-2
36/96
Redialing a CallThe last three phone numbers dialed can be quickly rebase.
1) With the phone in standby mode, press redial/p/voREDIAL soft key on the base.
2) Press volume up/down. Each press ofvolume up/dolast three number redialed.
3) Press talk/flash orspeakeron the handset (orspeaselected number is dialed.
4) To hang up, press endor return the handset to the bbase).
You can also display the redial list for redial number wiPress the MENU soft key, then select the redial menu.
select the number you want to dial. Press the DIAL so
Deleting a Redial Record (Handset only)1) Press redial/p/vol/ in standby mode.2) Press volume up/down repeatedly to display the
number to be deleted
If the number exceeds32 digits, only the first32 digits are retainedin redial memory.
If the redial memory is
empty, you will hear abeep.
Redial numbers storedin the handset and thebase are independentfrom each other.
note
8/9/2019 Uniden tru8885-2
37/96
Storing a Redial Record (from the handset only)1) Press redial/p/vol/ in standby mode.2) Press volume up/down repeatedly to display the number to be stored.
3) Press the EDITsoft key,, then select Store into PB? , and then the OKsof4) To complete the setting, follow the steps 3-8 in "Phonebook (Storing Pho
Numbers, Names, Distinctive Rings, and Speed Dial)" on pages 42-43.
8/9/2019 Uniden tru8885-2
38/96
Adjusting the Earpiece and SpeakEarpiece and Speaker VolumeYou can select from among of six volume levels on thehandset, and ten levels on the base. Pressing volumeup/down on the handset or base during a call willchange the earpiece or speaker volume. This settingwill remain in effect after the telephone call has ended
If you press volume up when the earpiece is at themaximum volume level, an error tone sounds.The error tone also sounds if you press volume downat the lowest volume.
Do Not Disturb (DND)The do not disturb feature (DND) allows you to mute tregistered handsets at the same time. The phone must and hold do not disturb on the base. You will hear a c
8/9/2019 Uniden tru8885-2
39/96
If you press answer on/offwhen the DND and the answering system is on, both oDND and the answering system will turn off.
To mute the ringer tone temporarily for each handset or the base, when theis ringing, press endor the MUTEsoft key on the handset or the base. The tone will return to the previous setting starting with the next incoming call
Mute Microphone
You can temporarily mute the microphone so that the caller cannot hear youthe MUTE soft key during talk mode (while the phone is in use) to mute the
microphone. Mute On and appear in the display. To cancel muting, press tMUTE soft key again. Mute Off appears.
8/9/2019 Uniden tru8885-2
40/96
Tone Dialing Switch-overSome telephone companies use equipment thatrequires pulse dialing (sometimes referred to as rotarydialing). If you need to enter tone dialing digits, youcan switch to tone dialing during the call. Thisfeature is useful when you need tone dialing to useautomated systems. For example, you can call yourbank's telephone teller system, then switch over to
tone dialing to enter your bank account number andmake menu selections.
Initially make your call with pulse dialing mode. Onceyour call connects, press */tone/
8/9/2019 Uniden tru8885-2
41/96
Privacy ModePrivacy Mode prevents interruption from other registered handsets or the basworks only when the phone is in use.1) Press the MENU soft key on the handset or base during talk mode.2) Press volume up/down to move the pointer to Privacy Mode and then the
key.
Privacy Mode On and appear in the display. To exit the Privacy Mode, rabove step again when the Privacy Mode is on. Privacy Mode Off appears
3 or 4-Way ConferencingIf you have more than one handset, up to four people can participate in aconference call.
3-Way ConferencingOutside line > Handset > Base
4-Way ConferencingOutside line > Handset > Handset > Base
8/9/2019 Uniden tru8885-2
42/96
When speaking on the base1) Press talk/flash orspeakeron the handset to
initiate the 3 or 4-conference call.
2) To hang up, return the handset to the cradle, orpress endon the handset. The base will still beconnected to the call.
8/9/2019 Uniden tru8885-2
43/96
Phonebook (Storing Phone Numbers, Names, DistincRings and Speed Dial)
You can store names and numbers in your phones phonebook, search for naalphabetically, and dial phonebook entries with just a few key presses. You store up to 100 numbers in the base and up to 100 additional numbers in eregistered handset.
The phone uses the same memory to store phonebook entries and Caller ID
messages. If the shared memory is already full, the phone will not store anyphonebook entries. You will have to delete some of the Caller ID messages byou can store a new phonebook entry.
1) When the phone is in standby mode, pressphonebook.2) Press the STORE soft key, Store/Edit Name appears.3) Enter the name (up to 16 characters) by using the
number keypad (see the "Steps for Entering Names andSpecial Characters" on page 44).If a name is not required, go to step 4. will
Base
8/9/2019 Uniden tru8885-2
44/96
6) If you store the phonebook entry from the handset,Distinctive Ring appears. Press volume up/down tomove the pointer to one of the Distinctive Ring optiand then press the
OKsoft key.
7) Speed Dial appears. Press volume up/down to move pointer to select the Speed Dial location (10 locatioSPD1-SPD0).
8) Press the OKsoft key. You will hear a confirmation todisplay.
Chain Dialing
The memory locations in the handset are not limited toalso store a group of numbers (up to 20 digits) that yocall connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Store ththe phonebook locations (refer to "Phonebook (StoringDistinctive Rings and Speed Dial)" on page 42) When
If you choose not tostore a DistinctiveRing, simply select the"No Selectn" option.
If you choose not to
store the name/number as a SpeedDial, simply choose the"No Selectn" option.
note
8/9/2019 Uniden tru8885-2
45/96
Steps for Entering Names and Special CharactersRefer to the letters on the number keys to select the desired characters. With eacof a number key (0-9), the displayed character appears in the following order:Upletters first, lower case letters next and finally the number corresponding to the
Number of times key is pressed
F l M i
8/9/2019 Uniden tru8885-2
46/96
For example, to enter Movies:1) When the phone is in standby mode, pressphonebo
Store/Edit Name appears.2) Press 6 once, and then press #/> to move the curso3) Press 6 six times.4) Press 8 six times.5) Press 4 six times.6) Press 3 five times.7) Press 7eight times.
8) When finished, press the OKsoft key.
To continue to store the telephone number, proceed to(Storing Phone Numbers, Names, Distinctive Rings, and
If the next characteruses the same number
key, you must press #/> to move the cursorover. Otherwise the next
time you press thenumber key, it changesthe character that waspreviously set.
note
Vi i h Ph b k
8/9/2019 Uniden tru8885-2
47/96
Viewing the PhonebookYour phone stores names/numbers in the phonebook memory entries, and yosearch names in alphabetical order. You can view the phonebook even while
phone is in use.
1) Pressphonebook. If you open the phonebook during acall, only the BACKsoft key will appear.
2) Press volume up/down, or the number keypad toscroll through the phonebook entries. Phonebookentries appear in alphabetical order (from first to lastwhen you press volume down, from last to first whenyou press volume up).
You can also use the letters on the number keys to
select the first letter of the desired name. Press anumber key (2-9 and 0) once for the first letter, twice for the second lettso on. The first entry that begins with the letter you entered appears.
For example, to search for Movies, press 6 once. Press volume up/down, uphonebook entry is displayed.
Base
Handset
M ki C ll U i th Ph b k
8/9/2019 Uniden tru8885-2
48/96
Making Calls Using the PhonebookFrom Standby Mode1) When the phone is in standby mode, select the phon
(see "Viewing the Phonebook" on page 46).2) Press talk/flash orspeakeron the handset orspeak
displayed number is dialed.3) To hang up press endon the handset (or pressspeak
handset to the base).
From Talk Mode1) Press talk/flash orspeakeron the handset orspeak2) Select the phonebook entry you want to dial (see "V
page 46).3) Press the DIAL soft key. The number in the displaye
dialed.4) To hang up press endon the handset (or pressspeak
handset to the base).
Speed Dialing
Editi E i Ph b k E t
8/9/2019 Uniden tru8885-2
49/96
Editing or Erasing a Phonebook Entry1) When the phone is in standby mode, pressphonebook.2) Press volume up/down, or the number keypad to select the phonebook en
want to edit or delete. (see "Viewing the Phonebook" on page 46).
a. Editing the Stored Data1) When the phonebook entry to be edited appears, press the EDITsoft key.
handset,then select Edit?. Store/Edit Name appears.2) Follow the steps 3 to 7 under "Phonebook (Storing Phone Numbers, Name
Distinctive Rings, and Speed Dial)" on pages 42-43 to complete the editioperation.
3) Press the OKsoft key. You will hear a confirmation tone.
b. Deleting the Stored Data
1) When the phonebook entry to be deleted appears,press the DELETE soft key on the base or the EDITsoftkey on the handset. For the handset, then selectDelete?.Delete Memory? appears.
2) Press volume up/down to move the pointer to Yes.
C i Ph b k E t i
8/9/2019 Uniden tru8885-2
50/96
Copying Phonebook EntriesCopy Phonebook allows you to transfer stored phonebohandset or from base to handset (or from handset to b
manually re-enter names and numbers. You can transfeentries) at a time, or all memory entries at once.
1) When the phone is in standby mode, pressphonebook
2) Press the COPY soft key.
3) Press volume up/down, to select the handset or basewhich you want to transfer the phonebook entries to anthen press the OKsoft key.
4) Press volume up/down to select One Memory or AllMemories: and then press the OKsoft key.
If you select All Memories, Are you sure? appears on thedisplay screen.Press volume up/down to selectYes, and then press t
If you select One Memory, press volume up/down, orthe number key (2-9 and 0) to select the phonebook
If the memory entry on
the receiving
handset or base is full,
and can not store the
phonebook locations,
you will hear a beep.
note
C ll ID d CIDCW (C ll ID C ll W iti )
8/9/2019 Uniden tru8885-2
51/96
Caller ID and CIDCW (Caller ID on Call Waiting)You must subscribe to Caller ID services through your local telephone providuse these features.
When the telephone rings, the Caller ID feature allows you to view the callename, phone number, date and time of call. With CIDCW (Caller ID on Call Wayou will hear a call waiting tone while you are on a call, and the Caller ID ddisplayed. To accept the waiting call, press talk/flash on the handset orflashs on the base (see page 34). Additionally, you can dial a number stored in
Caller ID list or save data to your phonebook.Important:
Memory for Caller ID messages and phonebook entries (including Speed Dialcommon, you can store up to 100 entries for each handset and the base. Camessages are not stored when you have 100 phonebook entries. When you hstored total of 100 phonebook entries and Caller ID messages, the oldest Ca
message is overwritten.
The date and time receivedCaller's name
Caller's phone number
Base Handset
You may receive any one of the following messages:
8/9/2019 Uniden tru8885-2
52/96
You may receive any one of the following messages:
When invalid data is received; Incomplete Data
When a private name is received; Private Name
When a private number is received; Private NumberWhen a unknown name is received; Unknown Name
When a unknown number is received; Unknown Number
2) When you pick up the phone, the display changes to
(AutoTalk feature is set to on).Data errors appear as "."
Viewing the Caller ID ListThe Caller ID list stores information for incoming calls
You can store up to 100 Caller ID messages and PhoneSpeed Dials) for each handset and the base. You can vithe handset or base during a call or when the phone is
The number of callsfrom the same Caller IDappears next to thereceived time. Onceyou view the newmessage, the numberwill be cleared anddisappear.
*icon appears next toTime to indicate this isa unread message.Once you view the newmessage, the*iconwill disappear.
note
The summary screen appears The screen shows the number of new messag
8/9/2019 Uniden tru8885-2
53/96
The summary screen appears. The screen shows the number of new messagtotal messages.
2) To view the Caller ID messages in historical order (from new to old or fromnew), repeatedly press volume down to scroll through the messages fromlatest to the earliest, or volume up to scroll back through the messages.To view the Caller ID messages with alphabetical search, press the number ke(2-9 and 0) with the letter associated with the first letter of the desired mes
Once you view the Caller ID list with alphabetical search, you cannotback to historical order (from new to old or from old to new) unless
exit and re-enter the operation.3) To finish the viewing operation:
From Handset - press end(or the BACKsoft key or talk/flash during a call).From Base - press cid/exitkey or the BACKsoft key.
Deleting a Caller ID Message
Deleting Information from the Caller ID List1) When the phone is in standby mode, view the Caller ID information to be
Deleting all Caller ID names/numbers
8/9/2019 Uniden tru8885-2
54/96
Deleting all Caller ID names/numbers
1) When the phone is in standby mode, press cid/vol/(cid/exit).
Press the DELETE soft key. Delete All? appears.
2) Press volume up/down to choose Yes.
3) Press the OKsoft key. You will hear a confirmation to
Using the Caller ID Message List
Calling a party from the Caller ID listFrom Standby mode1) When the phone is in standby mode, select the Caller
Caller ID List" on page 51).2) Press talk/flash orspeakeron the handset orspeak
You cannot make a callfrom the Caller ID list ifyour phone is connectedto a private branchexchange (PBX).
note
Long Distance calls and Area Code Setting/Cancellation
8/9/2019 Uniden tru8885-2
55/96
Long Distance calls and Area Code Setting/Cancellation
While the present Caller ID information is displayed, pressing */tone/< willor remove the prefix "1" in the display to set the call for a long distance ca
pressing #/> will set or cancel an area code (see page 30).
Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. The phnumber and name of the party on the Caller ID list can be stored in memory1) When the phone is in standby mode, select the Caller ID message to be st
Then press the STORE soft key on the base or the EDITsoft key on the haFrom the handset, then select EDIT?. Store/Edit Name appears. If the Callmessage is already stored in memory, you will hear a beep and This data already stored!! appears. The number will not be stored.
2) To complete the setting, follow the steps 3-8 in "Phonebook (Storing PhoNumbers, Names, Distinctive Rings, and Speed Dial)" on pages 42-43.
Call Waiting Deluxe Features
8/9/2019 Uniden tru8885-2
56/96
Call Waiting Deluxe FeaturesYour phone is pre-programmed with seven call waiting select to ask the calling party to hold, send them a bu
your voice mail, or answer and drop the first caller. Yoconference them into the current call or, at any time, drop the last caller. You must subscribe to Call Waitinguse these features. Not all features are available in alltelephone company for details.
1) From the baseWhen you receive a Call Waiting call, press the CWDoptions.From the handsetWhen you receive a Call Waiting call, press the MENPress volume up/down to select CallWaitDeluxe, theof option.
2) Press volume up/down or the number keypad (1-7)
For example:press volume down 4 times press v
To activate features,select CW On/CWDXOn in the CIDCWoption. See page 30.
You can also answer awaiting callimmediately bypressing talk/flash,the first caller will beplaced on hold. Toreturn to the originalcaller, press talk/flashagain.
If you don't choose aCWDX option within 30seconds, the phonereturns to call.
To return to the call,press the BACKsoftk
note
The Integrated Telephone Answering Device
8/9/2019 Uniden tru8885-2
57/96
The Integrated Telephone Answering DeviceThe phone has a built-in answering system that answers and records incominYou can also use your answering system to record a conversation, leave a vo
memo message, or to announce a special outgoing message to callers when away from your phone.
Features Digital Tapeless Recording
Up-to 12 minutes of Recording Time Call Screening Personal or pre-recorded Outgoing Messages Voice Prompts for TAD (English, Spanish, or French) Time and Day Announcement Remote Message Retrieval Toll Saver Conversation Recording Voice Memo Message Alert On/Off Retrieve TAD Messages using Handset
Turning the Answering System On/Of
8/9/2019 Uniden tru8885-2
58/96
Turning the Answering System On/Of1) To turn the answering system on, press answer
on/offon the base when the phone is in standbymode. and the number of messages storedin memory appears on the sub-display. If the sub-display flashes, then there are new messageswaiting for you.
2) To turn the answering system off, press answer
on/offon the base. appears on the sub-display.
Setting your outgoing message (Greeti
When you receive a call, the answering system automarecorded message or your own greeting. To record yourbetween the two outgoing messages, refer to Setting System Setup on page 24.The following message is pre-recorded: "Hello, no one Please leave a message after the tone."
When the answeringsystem is full, you willhear No Remaining
Time and appearson the sub-display. Youshould delete some
messages so that thesystem can record newmessages.
Position yourself asnear to the base aspossible and speakclearly when recording
your outgoingmessage.
If you make an outsidecall, or a call isreceived on the baseduring the operation,the operation is
note
8/9/2019 Uniden tru8885-2
59/96
Using your Answering System
8/9/2019 Uniden tru8885-2
60/96
Using your Answering SystemThe message counter displays the number of messagesstored in memory. If the display flashes, then there
are new messages waiting for you. The answeringsystem is designed to play your new messages first.After you play all your new messages, you can thenplay your old messages.
Playing your messages
1) When the base is in standby mode, press play/sThe system announces the number of new and old mcounter displays only the number of new messages. message was received is announced after the messagcounter will then display the number of current stor
2) When all new messages have been played, you hear system announces "End of messages." The system rehave reviewed your new messages, you can play you
play/stop again. Once you have listened to a nean old message. The old messages will be played in received.
The time stamp will not
be heard until you have
set the time.
note
within a few seconds (about 4 seconds during remote operation) after a m
8/9/2019 Uniden tru8885-2
61/96
begins playing. If you have several messages, press the |>| soft key at anytime to skip to the next message.
Each time the >>| soft key is pressed, the system scans forward one mess
you have several messages, press the >>| soft key repeatedly to find the myou want to play. To quickly scroll through a message, press and hold thesoft key. The system advances through the playback at double speed.
3) Press play/stop at anytime to stop reviewing your messages and retustandby. The message counter shows the number of messages stored in m
3) To delete all messages, press delete messege in st
8/9/2019 Uniden tru8885-2
62/96
) g p gmessege again after the announcement "To delete aagain."
When you try to delete all messages without first listeyou hear several short beeps followed by an announcemessages." This protects you from accidentally erasingreviewed.
Important:When you press delete messege, you are permanentldeleted, the message cannot be replayed or retrieved.
Voice memoThe voice memo function allows the user to record mesand less than 4 minutes).1) In stand by mode, press the RECORD soft key on the2) Press the STARTsoft key.3) Start your recording after the announcement "Recor
Recording a conversation
8/9/2019 Uniden tru8885-2
63/96
You can record a conversation from the handset or the base (more than 2 seand less than 10 minutes).
1) During a conversation, press the MENU soft key.2) Press volume up/down to select Call Record, and then press the OKsoft
Recording a Call appears on the display.A confirmation tone, that can be heard by both parties, sounds during rec
3) To stop recording:
From Handset - press the MENU soft key and volume up/down to select Call You will hear a confirmation tone.
From Base - pressplay/stop. Or press the MENU soft key and volume/volume/ to select Call Record. You will hear a confirmatio
Screening a call
From the baseTo screen an incoming call use the following steps:
2)
8/9/2019 Uniden tru8885-2
64/96
a)To mute the Call Screen, press the MUTE soft key muting, press the SCREEN soft key.
b)To answer the call, pressspeakeror pick up the hAutoTalk is set to on).
From the handsetPress the SCREEN soft key when the system is answerinpress the MUTE soft key. If the handset is away from t
speakeror any number key, */tone/ (when Aanswering system will disconnect automatically.
Remote Operation
You can check, play, or delete messages, even record a remote location (when you are away from home, or frohandset). Additionally, you can turn on or off your ans
Remote access away from home
3) The answering system announces the current time and the number of mest d i Y h "T l i i t
8/9/2019 Uniden tru8885-2
65/96
stored in memory. You hear "To play incoming messages, press zero-two. help, press one-zero." You will hear a beep.
4) Enter a command within 15 seconds, each command there after must be e
within 2 seconds. You may select a command from the following chart:
* For the Repeat a Message function, press 0 then 1 within about four secorepeat the previous message, or press 0 then 1 after about four seconds to
the current message.**For the Memo Record and Greeting Message Record functions, the first tim
enter the corresponding command, the phone starts recording. If you wanstop the recording, press 0 then 7, 8 or 5.
5) After the command has finished, you hear intermittent beeps indicating tsystem is in the command waiting mode You may enter another command
Command Function Command Function
0 then 1 Repeat a Message* 0 then 6 Answering System On
0 then 2 Playing incoming Messages 0 then 7 Memo Record/Stop**
0 then 3 Skipping a Message 0 then 8 Greeting Message Record/Stop**
0 then 4 Deleting a Message 0 then 9 Answer System Off
0 then 5 Stop Operation 1 then 0 Help
6) When you are finished, hang up to exit the system. automatically returns to standby
8/9/2019 Uniden tru8885-2
66/96
automatically returns to standby.
Remote access with the handsetYou can operate your answering system from another r1) When the phone is in standby mode, press on th
AnsweringMachine operation appears on the handsetsystem announces the current time and the number memory. Messages will be played in the order in wh
time and day that each message was received is annplayed.
2) You hear "To play incoming messages, press two. FoYou will hear a beep.
If you press endbefore the answering system answers,
When the answering system does not answer within 6 phone will return to standby. When you receive a call, the remote operation is cance You can change the handset volume during a remote o During the remote operationRemote AnsweringMach
base. If you have new messages and old messages, after you
messages you can play your old messages by pressing
Time stamp will not beheard until you haveset the time.
When the answering
system is full,appears on the base.You should delete
h
note
Remote Key Function
8/9/2019 Uniden tru8885-2
67/96
* For the Repeat a Message function, press 1 within about four seconds to the previous message, or press 1 after about four seconds to repeat the cmessage.
**For the Memo Record and Greeting Message Record functions, the first timenter the corresponding command, the phone starts recording. If you wanstop the recording, press 7, 8 or 5.
4) After the command has finished, you will hear intermittent beeps indicatithe system is waiting for a command. You may enter another command attime from the chart above.
5) When you are finished, press endto exit the system.
||/3 Skipping a Message 8 Greeting Message Record/S
/4 Deleting a Message 9 Answer System Off
/5 Stop Operation 0 Help Guidance
Expanding Your Phone
8/9/2019 Uniden tru8885-2
68/96
10 Handset ExpandabilityYour phone supports up to 10 handsets,including any handsets supplied with yourphone. You can now place a fully-featuredcordless handset anywhere AC power isavailable to connect the handset charger.Up to 2 handsets can be used in DirectLink
Mode or on an intercom call without interfering with ito have a 4-way conference among the base, 2 handseAll of the handsets ring when a call is received.
Backwards/Forwards Compatibility
Your phone is compatible with other Uniden 5.8GHz DigExpandable Handsets. Compatible models include the TTCX440, and ELX500. (Please check www.uniden.com fupdated list of expansion handsets compatible with thiseries.)
If you have any troublewith your phone, visitour web site atwww.uniden.com orcall our CustomerHotline at 1- 800-297-
1023 (Mon-Fri 7 am to7pm, Sat/ Sun 9 am to5pm, CST). (TheCustomer ServiceHotline is closed onholidays.)
Charge the handset
battery pack for atleast 15-20 hoursbefore using your newcordless telephone forthe first time.
note
Connecting the Charger
8/9/2019 Uniden tru8885-2
69/96
1) Connect the AC adapter to the DC IN 9V jackand to a standard 120V AC wall outlet.
2) Set the charger on a desk or tabletop, andplace the handset in the charger with thekeypad facing forward. (See " B. Install.... therechargeable battery pack into the handset,and charge for at least 15-20 hours beforeusing" on page 10.)
Register the HandsetIf you purchase an expansion handset, you need to register the handset befoOnly one handset can be registered at a time.
Handsets supplied with the phone are registered to the base by the factory.charged, pre-registered handsets display a handset ID number. Handsets thanot been registered display Models vary! Charge handset on the base forregistration or refere to Owner' Manual. When you register an extra handsth b th h d t ID ill b i d
To register a TCX805 handset, simply place it in theWhile the handset is registering Handset Registerin
8/9/2019 Uniden tru8885-2
70/96
While the handset is registering, Handset RegisterinWhen Registration complete. is displayed, the hanthe base. IfRegistration failed. appears, please tr
To register a ELX500, TCX440, or TCX400 handset, f1) Disconnect the AC adapter from the main base.2) While pressing downflash/find hs, reconnect the A3) On the handset, press and hold # until you hear a b
While the handset is registering, Handset RegisteringRegistration complete. is displayed, the handset has bRegistration failed. appears, please try these steps a
Using DirectLink Mode
8/9/2019 Uniden tru8885-2
71/96
To use this feature, you must enter the handsetsinto DirectLink mode first.
To enter DirectLink mode, see page 17.
DirectLink call
1) When the phone is in the DirectLink standbymode, press the DirectLink soft key (example of
DirectLink from handset #1).
2) Select the handset to which you wish to DirectLinkwith by pressing the number keys (0-9). Your handsetwill then page the other handset.
3) On the receiving handset, press talk/flash,theANSWER soft key, or if Any Key Answer is on, press anynumber key, */tone/.
4) When you finish your conversation, press endor theEND soft key on either handset. To cancel DirectLink mode (and return to standby) return the handset to the cradle or press the CANCEL soft key
Intercom/Call Transfer Feature
8/9/2019 Uniden tru8885-2
72/96
Intercom and Call Transfer features are available for yo
IntercomFrom handset to handset or handset to the base1) In standby mode, press intcom/hold.2) Select the base or the handset you want to talk wit
within 30 seconds. To select the handset (or thebase), press volume up/down, and then press the O
soft key. If you select All, all other handsets and thbase will be paged. An intercom tone sounds.
To cancel intercom, press the CANCEL soft key.
3) To answer the page on a handset, press talk/flash,
intcom/hold, or the ANSWER soft key. If Any KeyAnswer is enabled, pressing any number key, */toneor #/> will answer the page. If AutoTalk is enabled, ycan answer the page by simply picking up the handsTo answer a page from the base, press intercom/hosoft key
If the party is busy orout of range, thehandset returns tostandby mode.
If any you receive anoutside/intercom call
or page while selectingthe other handset (orthe base), theoperation will becanceled.
If the party does notanswer within one
minute, the operationis canceled.
note
From the base to a handset1) In standby mode, press intercom/hold on the base.
8/9/2019 Uniden tru8885-2
73/96
1) In standby mode, press intercom/holdon the base.2) Select the handset you want to talk with within 30 seconds. To select th
handset, press volume/ or volume/ , and then press the OKsoft
you select All, all handsets will be paged. An intercom tone sounds. To cintercom, press intercom/holdor the CANCEL soft key.
3) Follow the steps 3-4 under From handset to handset or handset to the bpage 71.
Call Transfer FeatureFrom handset to handset or to the base1) During a call, press intcom/holdon the handset.2) Select a handset or the base to transfer the call to
within 10 seconds. To select the handset (or the base),press volume up/down, and then press the OKsoft key.
If you select All, all other handsets and the base willbe paged.The call will automatically be placed on hold, and an intercom tone sounTo cancel the transfer, press talk/flash, the CANCEL soft key orspeakerinitiating handset.
3) To answer the page on a handset press talk/flash intcom/hold or the A
4) To speak to the caller, press talk/flash on the receithe base.
8/9/2019 Uniden tru8885-2
74/96
From the base to a handset
1) During a call, press intercom/holdon the base. Theplaced on hold.
2) Select the handset you want to talk with within 10 handset, press volume/ or volume/ and tyou select All, all handsets will be paged. An intercthe transfer, press intercom/hold,speakeror the CA
3) To answer the page on a handset, press talk/flash,ANSWER soft key. If Any Key Answer is enabled, pre
*/tone/ will answer the page. If AutoTalk
the page by simply picking up the handset.
4) To speak to the caller, press talk/flash on the recei
Changing the Digital Security Code
8/9/2019 Uniden tru8885-2
75/96
The digital security code is an identification code used to connect the handthe base unit. Normally, setting the code is not necessary. In the rare situati
you suspect another cordless telephone is using the same security code, youchange the code. To change the digital security code:1. De-register all the handsets you have (see De-register the handset on pa2. Register the handsets by following the steps under "Register the Handset
page 68.
Find HandsetTo locate the handset, pressflash/find hs on the basewhen the phone is in standby mode. All registeredhandsets beep for 60 seconds, and Paging appears onthe handset display. To cancel paging, press any key
on the handset orflash/find hs on the base.
Installing the Beltclip
8/9/2019 Uniden tru8885-2
76/96
To attach the beltclipInsert the beltclip into the holes on each side of the
handset. Press down until it clicks.To remove the beltclipPull either side of the beltclip to release the tabs fromthe holes.
Headset InstallationYour phone may be used with an optional headset. To this feature, insert the headset plug into the headset jaYour phone is ready for hands-free conversations.(Headset may be purchased by calling the Uniden PartsDepartment or visiting the web site. See back page.)
Note on Power SourcesB l d h dli
8/9/2019 Uniden tru8885-2
77/96
Battery replacement and handlingWhen the operating time becomes short, even after a battery is recharged, p
replace the battery. With normal usage, your battery should last about one yPlease contact your place of purchase or the Uniden Parts Department for areplacement battery.WarningTo avoid the risk of personal injury or property damage from fire or electricalonly use the Uniden battery model and Uniden adapter model specifically
designated for this product.Power FailureDuring the period that the power is off, you will not be able to make or receiwith the telephone.
Maintenance
Caution Use only the specified Uniden battery pack (BT-446).
Do not remove the batteries from the handset to charge them. Never throw the battery into a fire, disassemble them, or heat them. Do not remove or damage the battery casing.
General InformationTh h li ith FCC P t 15 d 68 O ti
8/9/2019 Uniden tru8885-2
78/96
The phone complies with FCC Parts 15 and 68. Operatin0 C to +50 C (+32 F to +122 F)
AC Adapter InformationAC Adapter part number: AD-830 for the base AD-0005 forInput Voltage: 120 AC 60Hz 120V AC 60HOutput Voltage: 9V DC 400mA 9V DC 210mA
Battery InformationBattery part number: BT-446Capacity: 800mAh, 3.6V
To avoid damage to the phone use only Uniden AD-83If the handset is left off of the base, the actual Talk respective to the amount of time the handset is off t
Recharge your phone on a regular basis by returning theach phone call. When the operating time becomes shrecharged, please replace the battery. With normal usaabout one year.
TroubleshootingIf h i t f i t t ti l t th i
8/9/2019 Uniden tru8885-2
79/96
If your phone is not performing to your expectations, please try these simp
Symptom Suggestion
The charge LED won't illuminatewhen the handset is placed in
the cradle.
Make sure the AC adapter is plugged into the base or the charg
handset) and wall outlet.
Make sure the handset is properly seated in the cradle.
Make sure the charging contacts on the handset and the base
than one handset) are clean.
The audio sounds weak. Move the handset and/or base away from metal objects or app Make sure that you are not too far from the base.
Can't make or receive calls.
Check both ends of the base telephone line cord.
Make sure the AC adapter is plugged into the base and wall out
Disconnect the AC adapter for a few minutes, and then reconne
De-register the handset (see "De-register the Handset" on pag
(see "Register the Handset" on page 68). Make sure that you are not too far from the base.
Make sure the line is not in use.
If an outside call is already established, you can not make ano
Charge the batteries in the handset for 15-20 hours by placing
charging cradle
Keep the handset away from microwave ovens computers rem
Symptom Suggestion
8/9/2019 Uniden tru8885-2
80/96
Severe noise interference.
Keep the handset away from microwave ovens, computers, rem
microphones, alarm systems, intercoms, room monitors, fluores
appliances.
Move to another location or turn off the source of interference
The Caller ID does not display.
The handset was picked up before the second ring.
The call was placed through a switchboard.
Call your local telephone company to verify your Caller ID serv
problem with your Caller ID service.
You cannot register the handsetat the base.
Charge the battery pack for 15-20 hours.
De-register the handset (see "De-register the Handset" on pag
(see "Register the Handset" on page 68).
The handset doesn't
communicate with other
handsets.
De-register the handset (see "De-register the Handset" on pag
(see "Register the Handset" on page 68).
Make sure that you have registered all handsets.
An extra handset can't join
the conversation. Make sure there are not 2 handsets already using the 3-way co
The handset or the base can't
join the conversation Make sure that another handset or base is in privacy mode.
The answering system does
not work
Make sure the base unit is plugged in.
Make sure that the answering system is turned on.
No sound on the base unitdj h k l h b i
Symptom Suggestion
8/9/2019 Uniden tru8885-2
81/96
No sound on the base unit
speaker during call monitoring
or message playback.
Adjust the speaker volume on the base unit.
Make sure the call screen feature is set to on.
Cannot access remote call-in
features from another touch-
tone phone.
Make sure you are using the correct PIN number.
Make sure that the touch-tone phone you're using can transmit
seconds. If it cannot, you may have to use another phone to a
Time stamp cannot be heard. Make sure you have set the time (see "Setting Day and Time" o
If you still have a problem. Call our customer hotline at 1-800-297-1023.
Liquid DamageMoisture and liquid may damage your cordless phone Follow the steps below if your pho
8/9/2019 Uniden tru8885-2
82/96
Moisture and liquid may damage your cordless phone. Follow the steps below if your pho
Case Action
If the exterior plastic housing on the handset orbase is exposed to moisture or liquid.
Wipe off the liquid, and use as normal.
If moisture or liquid has entered the plastic housing(i.e. liquid can be heard in the phone or liquid hasentered the handset battery compartment or ventopenings on the base).
Handset:1) Remove the battery cover and leave it off 2) Disconnect the battery pack. Leave the ba
disconnected for at least 3 days.
3) Once the handset is completely dry, reconncover.
4) Recharge the handset's battery pack for 20Base:1) Disconnect the AC adapter from the base, 2) Disconnect the telephone cord from the ba3) Let dry for at least 3 days.
IMPORTANT: You must unplug the telephonepacks to avoid charge interruption.CAUTION: DO NOT use a microwave oven to scause permanent damage to the handset, basAfter following these steps, if your cordless tour Customer Service Hotline at 1-800-297-1
8/9/2019 Uniden tru8885-2
83/96
8/9/2019 Uniden tru8885-2
84/96
I.C. NoticeTERMINAL EQUIPMENT
8/9/2019 Uniden tru8885-2
85/96
TERMINAL EQUIPMENTNOTICE: This equipment meets the applicable Industry Canada Terminal Equipment T
This is confirmed by the registration number. The abbreviation, IC, before tthat registration was performed based on a Declaration of Conformity indictechnical specifications were met. It does not imply that Industry Canada
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is markeREN assigned to each terminal equipment provides an indication of the ma
allowed to be connected to a telephone interface. The termination on an icombination of devices subject only to the requirement that the sum of theall the devices does not exceed five.
RADIO EQUIPMENTThe term "IC:" before the radio certification number only signifies that Industry Cana
met.
Operation is subject to the following two conditions: (1) this device may not cause imust accept any interference, including interference that may cause undesired operacommunications may not be ensured when using this telephone".
Name Phone No. Name Phone No.
Memory List
8/9/2019 Uniden tru8885-2
86/96
Name Phone No.
12
34567891011121314151617
18192021222324
3536
373839404142434445464748495051
52535455565758
Name Phone No.
6970
717273747576777879808182838485
86878889909192
8/9/2019 Uniden tru8885-2
87/96
mute . . . . . . . . . . . . . . . . . . . 38Room/baby monitor . . . . . . . . . . 18S
8/9/2019 Uniden tru8885-2
88/96
Setting upbase unit . . . . . . . . . . . . . . . . 12
extra handset . . . . . . . . . . . . . 68Handset . . . . . . . . . . . . . . . . . 19Menu options . . . . . . . . . . . . . 16
Soft Key . . . . . . . . . . . . . . . . . . . 8Speed dialing . . . . . . . . . . . . . . 47T
Transferring a call . . . . . . . . . . . 72VVoice memo . . . . . . . . . . . . . . . . 61W
Warranty . . . . . . . . . . . . . . . . . . 83
8/9/2019 Uniden tru8885-2
89/96
C U T C U
8/9/2019 Uniden tru8885-2
90/96
Task Key
Repeat a MessagePlaying incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/StopGreeting Message Record/Stop
Answer System Off
Help Guidance
C U T
Task KeyRepeat a Message
Playing incoming Messages
Skipping a Message
Deleting a Message
TaskRepeat a Message
Playing incoming Message
Skipping a Message
Deleting a Message
Task
Repeat a MessagePlaying incoming Message
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/StopGreeting Message Record/
Answer System Off
Help Guidance
C U
Main Menu Flow ChartFrom standby mode
8/9/2019 Uniden tru8885-2
91/96
Base
Handset
MENU
or
MENU
OK
Enter
or
OK
Base
8/9/2019 Uniden tru8885-2
92/96
Handset
or
or
OK
OK
OK
OK
or
or
Memo
8/9/2019 Uniden tru8885-2
93/96
Memo
8/9/2019 Uniden tru8885-2
94/96
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product. If you have any questioplease do not return this product to the place of pu
8/9/2019 Uniden tru8885-2
95/96
please do not return this product to the place of pu
Having Trouble?Our customer care specialists are here to help you! Visit our websour Customer Service Hotline at 1-800-297-1023, Mon-Fri, 7 a.a.m. to 5 p.m. CST. (The Customer Service Hotline is closed on h
Need a Part?To order headsets, additional handsets, replacement batteriesour website at www.uniden.com or call 1-800-554-3988, Mon-
Help for our Special Needs CustomersIf you need special assistance due to a disability or have quefeatures of this product, please call1-800-874-9314 (voice
FOR
ACCE
SSORI
ES,
GOONL
INE @
WWW
.UNI
DEN.
COM
8/9/2019 Uniden tru8885-2
96/96
UPZZ01777BZ(0)
THANK YOU FOR BUYI NG A UNIDEN PRODUCT.
2005 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China.
REGISTER ONLINE TODAY!