Upload
votram
View
216
Download
2
Embed Size (px)
Citation preview
Wetroom Innovations
A luxury wetroom from a simple kit
Wetroom Innovations
A luxury wetroom from a simple kit
UniclassL22231
C1/sfB
942 X
EPICB83
Finest quality, biggest range, best service and pricing
You can find all you need to know about installing wetrooms using kits from Wetroom Innovations on the following pages…
■ WET-DECK FLOOR FORMERS Page 3Maxxus gives an even gradient to the drainage point. This guarantees consistent water-flow, ensuring peace of mind when showering.
■ DRAINAGE Page 5Maxxus comes complete with several drainage options. All drains have the option of a stainless steel grid and are top accessible making cleaning and maintenance very simple. When gravity drainage is not an option there is a pumped system available.
■ SIMPLE KITS Page 6Simply the biggest choice on the market.
■ WATERPROOFING Page 8The option of BSA self-adhesive membrane or Lastogum tanking kit.
■ BETA SCREENS Page 9Our own brand, the most minimal screen on the planet! Made in England in 6mm, 8mm or 10mm thicknesses. Made to measure at stock prices.
■ UNDERFLOOR HEATING Page 10The perfect solution for a warm tiled floor; it also dries the tiles faster.
■ ULTIMATE TILE BACKER BOARDFully waterproof for floors and walls; general construction board; insulant for underfloor heating (UFH).
■ MAXXUS CHANNEL DECK Page 11
■ INSTALLATION OVERVIEW Page 12Including floor detail and cross-section drawings.
Finest quality, biggest range, best service and pricing
2
THE HOME OF ‘WETROOM IN A BOX’
Vinyl wetfloor
Raised wetfloor
Tiled wetfloor
When value matters
When value matters
NEW - 3rd generation wet deck
MAXXUS wetfloor former is designedto facilitate level-access showering intimber or concrete. It relieves floorspace permitting greater access,mobility, freedom and a lighter, moreopen and contemporary ambience.
For the unique Purus Minimax patent-ed drain - the world’s shallowest(70mm) drain incorporating a trap,the unique NOOD no-odour trapwithout a water seal.
3
WET-DECK FLOOR FORMERS
M A X X U S
MT934900mm x 900mm
350mm
450m
m
MT9301000mm x 1000mm
400mm
500m
m
MT9311135mm x 770mm
470mm
285m
m
MT9321300mm x 800mm
550mm
310m
m
4470kg70kg
16” 400mm
THE STRONG ONEMAXXUS has been tested under staticload at 1000mm centres. Super-strongMAXXUS, made from vacuum formedGRP, will comfortably support a sustained load of 75 stone (470kilo)load over 16” (400mm) joist centreswithout deflection.
■ Needs no under-boarding. ■ Fast 1 hour installation.
MT9331500mm x 800mm
650mm
310m
m
MT9351400mm x 900mm
600mm
350m
m
MT9361200mm x 1200mm
500mm
600m
m
MT12941260mm x 940mm
630mm
470m
m
When value matters
When value matters
BENEFITS:■ Simply rotate to place the drain
hole in the ideal position.■ May be trimmed down to any size. ■ Totally flat underside for easy
fixing. ■ Recessed screw holes allow easy
fixing. ■ No release agent to inhibit
bonding of adhesives, tanking ormembranes.
■ Level-access floor, no step. ■ 25 year guarantee. ■ PURUS drains are BBA approved.
CUSTOM-MADE SERVICEWet decks made to any size, drainhole located anywhere.
… a winning combination, new tothe UK after 2 years development,resolving the issues of high qualityand best value for money.
VINYL or TILED finish with the sameMinimax drain.■ Square stainless steel grating can
be supplied for tiling.■ Circular grate for vinyl can be
upgraded to stainless steel.
■ Flows 48 litres per minute.■ Projection beneath tray only 62mm.■ The world’s shallowest drain with
a trap.■ BBA approved.■ Pipe reduces to 40mm incl.
4
MAXXUS
MAXXUS and MINIMAX
Optional drain location - rotate MAXXUS to avoid joists
M A X X U S
Stainless steel round grating - vinyl option
Stainless steel square grating - tile option
Minimax Drain
Typical application ofMAXXUS over a joistfloor (MAXXUS can berotated to avoid thejoists)
When value matters
When value matters
MINI ODEN 50Conventional water-seal drain flows40 litres per minute. Pipe reducer to40mm incl.
5
DRAINAGE
CARO LO LINEAluminium drain with unique chrometop options = 100mm deep, side outlet only.
Illustrations: Left - tiled floorRight - vinyl sheet floor
Note: All the above are suitable fortiled or vinyl floors (with addition ofsquare grid and frame - see page 4).
MINIMAXPumped drain for vinyl or tiling;22mm outlet; depth 70mm. Use withOrca pump.
MINI BRAGE 110Vertical drain connects to soil pipe.
MINI BRAGE 50Vertical outlet drain flows 40 litresper minute. Pipe reducer to 40mmincl.
When value matters
When value matters
6
M A X X U S MB934900mm x 900mm
350mm
450m
mMB9301000mm x 1000mm
400mm
500m
m
MB9311135mm x 770mm
470mm
285m
m
MB9321300mm x 800mm
550mm
310m
m
MB9331500mm x 800mm
650mm
310m
m
MB12941260mm x 940mm
MB18081800mm x 820mm
650mm
310m
m
MB9351400mm x 900mm
600mm
350m
m
MB9361200mm x 1200mm
500mm
600m
m
MB15011500mm x 1200mm
650mm
700m
m
630mm
470m
m
For tiling and Vinyl
KITS USING BSATTMM SHEET MEMBRANE
Wetroom-in-a-box■ 3rd Generation Wet Deck/Floor
Former.■ Rigid, structural over joists - no
under boarding needed.■ Maxxus is 22mm thick at the
edges. ■ Maxxus has a 50mm flat perimeter
band, therefore the maximumshowering area is 100mm less thanthe size shown.
■ Drain projection beneath tray =62mm (horizontal outlet only) or127mm (vertical outlet only).
■ Drain flow is 47 litres per minute.Kit contents:1 - Maxxus for level access.1 - Minimax drain c/w stainless grid.
Horizontal or Vertical outlet(please specify).
1 - Pipe reducer 2” to 11⁄2” (50mm to40mm).
1 - BSA Self-adhesive Membrane1000mm wide.
1 - 15 metre joint tape.1 - Adhesive sealant cartridge.2 - Internal corner pieces.1 - 1 litre Primer.1 - Roller to ensure adhesion of
membrane.Note: If supplied for vinyl flooring astainless steel grid and tanking kit isnot required.
5 Designer grid options available.Will take the optional drains MiniBrage and Mini Oden (see page 5).
SIMPLE WETROOM KITS - fast 1 hour install
No need for plywood■ Rigid, structural, spans joists.■ 18mm thickness levels off floor
boards. ■ No shrinkage, very stable. ■ Compatible with all membranes
and tanking.
■ Saves the cost, effort and addedthickness of overlaying with tbb.
Why have a carefully sealed ‘wetarea’ and then lay plywood or chipboard next to it? A top job needsa superior floor. Needs tanking ormembrane.
■ A totally stable wetroom floor.■ Composite construction. ■ Level access - no step. ■ Acoustic sound reduction of
33db. ■ Eliminates timber movement
and tile-cracking.
SHOOT BOARDTM 1200mm x 600mm x 18mm
When value matters
When value matters
7
M A X X U S ML934900mm x 900mm
350mm
450m
mML9301000mm x 1000mm
400mm
500m
m
ML9311135mm x 770mm
470mm
285m
m
ML9321300mm x 800mm
550mm
310m
m
ML9331500mm x 800mm
650mm
310m
m
ML12941260mm x 940mm
ML18081800mm x 820mm
650mm
310m
m
ML9351400mm x 900mm
600mm
350m
m
ML9361200mm x 1200mm
500mm
600m
m
ML15011500mm x 1200mm
650mm
700m
m
630mm
470m
m
For tiling and Vinyl
KITS USING LASTOGUM TANKING KIT
Wetroom-in-a-box■ 3rd Generation Wet Deck/Floor
Former.■ Rigid, structural over joists - no
under boarding needed.■ Maxxus is 22mm thick at the
edges. ■ Maxxus has a 50mm flat perimeter
band, therefore the maximumshowering area is 100mm less thanthe size shown.
■ Drain projection beneath tray =62mm (horizontal outlet only) or127mm (vertical outlet only).
■ Drain flow is 47 litres per minute.Kit contents:1 - Maxxus for level access.1 - Minimax drain c/w stainless grid.
Horizontal or Vertical outlet(please specify).
1 - Pipe reducer 2” to 11⁄2” (50mm to40mm).
1 - 8k tanking liquid Lastogum (covers 7m2).
1 - 1 litre Primer for porous surfaces.1 - 10m Flex Tape for wall/floor joint
and other gaps.2 - Flex internal corners.2 - Flex pipe collars.1 - 75mm or 100mm brush.Note: If supplied for vinyl flooring astainless steel grid and tanking kit isnot required.
5 Designer grid options available.Will take the optional drains MiniBrage and Mini Oden (see page 5).
SIMPLE WETROOM KITS - fast 1 hour install
For timber floors to permit existingheights to be retained with no over-boarding or battening between joiststo compensate for a tile backerboard.
Holes drilled by installer to suit
Dowel joints
When value matters
When value matters
For the tanking of internal wetroomwalls and floors. German made highest quality.■ Retains water within the ‘wet
area’, preventing leakage to roomsbelow.
■ Suitable for homes, hotels, flats,sports facilities, changing rooms,hospitals.
■ Remains flexible, allowing formovement in the building structure.
Comprising of a 2mm thick self-adhesive, cold-applied membranewith unique adhesive band on frontface (90mm wide) to promote secureadhesion. Perfect for stone, brick,timber, concrete, plasterboard, andexisting tiling (if securely fixed). No drying period, can be tiled immediately using bag-powder, flexible tile adhesive.
■ Use in bathrooms, shower areas,wetrooms, balconies, kitchens.
■ Maximum tile/adhesive/grout loadcombined 20 kg/m2 = 10mm tilethickness.
■ Geo-textile surface for improvedtile adhesive bond.
■ No putty needed - flexible adhesive applied for gap-filling.
■ Roller appllied to bed the BSA. ■ Suits any electric UFH system.■ Kits of 10m2 or 5m2, 1000mm
wide.
BSA Kit Contents:1 - Roll membrane.1 - 15 metre joint tape.1 - 1 litre Primer.1 - Adhesive sealant cartridge.2 - Internal corners.1 - Roller.
INSTALLATIONMETHODFirstly, apply tape to wall/floorjoint, corners and places wheremembrane edges meet. Themembrane is applied to wallsand floor, followed by sealingthe joints with a skeleton gun.It may be preferred to apply tofloors only, dressing up wallsby 100mm only, then tankingthe walls with the tanking kit.This overcomes the tile loadinglimitation.
■ Used to provide a flexible water-proof membrane (tanking) beforetiling over with a flexible bag-pow-der (cementitious) tile adhesive.
■ Proven over 25 years, a 2-coatapplication will protect even when cracks up to 1mm open inthe substrate.
■ Will cover any substrate, but useprimer over timber, plasterboardor any porous surface.
■ Non-toxic, clean brushes in water.■ Can be trowelled, but will cover
7m2 by brush or roller.
Lastogum Kit contents:1 - 1 Bucket 8k1 - 1 litre Primer1 - 10m flex tape2 - Internal corners2 - Pipe collars1 - 1 Brush 75mm
INSTALLATION METHOD1 Prime the substrate if porous.
Primer G is water-based and canbe thinned to produce 2 litres.Allow to dry.
2 Apply first coat of Lastogum X inone direction only. Start high inthe corner of the wall, bedding a1.7m length of tape into the firstcoat. Complete the wall area.
Apply pre-formed corner in place, then more tapeinto wall/floor joint, overbrushing as you go.Use pipe collars for coppershower-supply pipes. Allowto dry overnight or may beoverbrushed after 3 hours.
3 Apply second coat ofLastogum X in the oppositedirection (ie: at 90 degrees).
Note: Fully compatible with all electric underfloor heatingsystems laid over the tankingmembrane.
8
WATERPROOFING
LASTOGUM - TANKING SYSTEMS FOR WETROOMS AND BATHROOMS
BSATTMM SELF-ADHESIVE BITUMEN MEMBRANE
When value matters
When value matters
Frameless for trays or wetfloors
Pioneers of the pared-back wetroomaesthetic, BETA is the most minimalscreen on the planet. All British*Lifetime warranty. 6mm, 8mm or10mm thick. 2000mm high.
■ Wall Fixing - Super slim edgechannel (with gasket) or 3 edgeclamps.
■ Top Brace - Slim 8mm rod1200mm long or bent 800mmlong.
■ Toe Pedestal - Unique, adjustable,17mm gap. Avoids drilling tile intomembrane, or use our bondingtape or H-profile, or direct contact.
Optional short ceiling fixing or new44mm diameter floor to ceiling pole.
See BETA brochure for full details ofBETA options. Specials at no extracost.
*All British means glass and 60% ofhardware.
Standard ScreenWidths available:
300mm700mm800mm900mm
1000mm1200mm
B E T AB E T A
9
BETA SCREENS AND DOORS
DoorChoice of knob, dual towel railhandle or finger hole pull.Widths available:
700mm750mm800mm
Corner Entry ScreenAny width from 200mm to1500mm
Dual Entry ScreenWidths available:
900mm1000mm1100mm1200mm1400mm
Our underfloor heating comprises a500mm wide mat system with self-adhesive backing. Rated160W/m2, 3.5mm thick and perfectfor use as full regular room heating.For timber and concrete sub-floors,usually installed beneath tiling. Twin conductor elements give verylow electromagnetic fields andrequire connection at one end only.To ensure electrical safety the cable isearthed using a metallic screen andmay be laid directly in the wet areafor luxurios showering.Includes floor sensor and digital thermostat with 7-day, 24-hour timerwith up to four on/off settings perday.
Kits 1m2 up to 21m2.Manufactured to ISO9001 standard; 10 year warranty.Maximum performance isachieved with floor insulationto prevent heat migratingdownwards - see tile backerboard below.
TBB is an insulated backer board fully waterproof for walls and floors,unlike heavy cement-based moisture-resistant boards. 4mm to 60mmthickness. 2 sizes: 1250mm x 600mmand 2500mm x 600mm. Has the correct hard surface that cannot bepeirced with a finger nail.Insulated core for improved U-value.Minimises tile cracking when substrate moves or shrinks owing tostability engendered by glass fibre re-inforcement mesh. The perfectwetroom lining and tanking board -offers instant membrane when jointsare sealed.
Install beneath UFH to preventheat-loss below the floor. Youcan also use Tile Backer Boardas a general construction boardto build vanity units and partitions for tiling. Also available: special bathinfill panels, boxing for soilpipes, curved boards, fixingwashers and dowels.
10
UNDERFLOOR HEATING (UFH)
ULTIMATE TILE BACKER BOARD (TBB)
UFH mat and thermostat
TBB comes is available in a wide range of thicknesses
The unique Channel Deck incorporates the 800mm Purus Linechannel drain and the patentedNOOD* (no odour) trap.
■ For tile or vinyl.■ Can be reduced in size.■ 1 hour installation.
Purus Line channel drains are available for purchase separately. The superior Swedishquality has to be seen to be believed. The heavyweight stainlesssteel is built into a unique 4-pieceunit, unlike the lightweight 2-pieceunits of others.
■ Lengths available: 300mm,600mm, 700mm, 800mm,900mm and 1000mm.
■ Triangular corner drain available.■ 7 gratings available, plus unique
tile insert version. ■ Height-adjustable to suit tiling
level via integral raising screws.■ Pipe outlet options: 40mm (via
reducer)50mm and 75mm diameter. Vertical or horizontaloutlets available.
■ BBA approved drains.
11
MAXXUS CHANNEL DECK
M A X X U S
1200 x 900Reference Code: P6821937Dimensions: 1200mm x 900mmThickness: 22mm
1200mm
900m
m800 Linear Drainage
* NOOD is a patented ultra-high flow drainthat prevents back-flow and eliminates smellsshould a water seal trap evaporate.
• There is no flat perimeter band.Needs no support legs as drainnests into deck aperture.
1200 x 1200Reference Code: P6821938Dimensions: 1200mm x 1200mmThickness: 22mm
1200mm
1200
mm
800 Linear Drainage
A wetroom can be fitted anywhere in any building, even an attic or basement, with the aid of a pump toassist drainage. A wetroom is usuallylevel access (totally flat floor) butcan be raised or sunk below floorlevel.This is the ideal time to reconsiderthe heating options for the wetroomarea. You may be happy with radiators in an existing bathroom.
Consider underfloor heating, eitherconnecting water pipes to an existingsystem or using new electric underfloor heating. Both will requireinsulated tile backer board below toprevent heat migtrating downwards.A key benefit of our system is thatyou only need to waterproof the ‘wet area’, not the entire wetroom orbathroom. This reduces costs to athird of usual levels.
Note: All references to tileadhesive are flexible powdertype - NEVER use ready-mixed adhesives inbathrooms and wetrooms.Tools required:Jigsaw or circular saw, powerdrill, spirit level, screwdriver,50mm screws. Hammer andchisel (for concrete). Also youmay need silicone, flexible tileadhesive, mixing paddle, bucket and timber noggins.
Run a spirit level over the floor togain a general idea of the levels. The MAXXUS slope is only 2%, soanything out of level will cause
pooling. It may be fitted straightover joists or packed with plastic ortimber packers over the length of ajoist to avoid single point loading.
As an option, it may be laid ona bed of flexible tile adhesiveor mortar to take up misalignment in the floor or toraise to a higher level. Suitablefor vinyl or tiled flooring.
12
INSTALLATION OVERVIEW
Wetroom Innovations LimitedL9 Riverside Business ParkBakewellDerbyshireDE45 1GSTel/Fax: 01629 815500 (3 lines)Email: [email protected]: www.wetroominnovations.com
Plastic coving for vinyl
Joint filled with High Grab adhesive
or car body filler
Pre-formed screw fixing holes
Plastic capping to cover vinyl
flooring
Minimax drainDepth below tray
62mm
Typical installation of MAXXUSover vinyl wetfloor.
Typical tiled installation
18mm ply on 38mm x 38mmbattens supporting overhang
waste pipeexit options
Maxxus let into floor
18mm ply overlaid with4mm TBB
ceiling below
joist
62mm