Upload
others
View
16
Download
0
Embed Size (px)
Citation preview
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 1
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
UnderstandingNAFS 11 – AAMA 450
ByElie Alkhoury, M.Eng. (Building Science), P.Eng
CAN-BEST Building Sciences Corporation
A FENCON 17 PresentationFebruary 10, 2017
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
www.CAN-BEST.com
Established in 1985
ISO 17025 SCC Accredited Laboratory
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 2
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
1. NAFS11 – Unit Rating
2. NAFS11 – Combination Rating
3. AAMA 450 – Mullion Rating
4. Option #1 – Assembly Testing
5. Option #2 – Mullion Testing
6. Option #3 – Calculations by P.E.
7. Grouping
8. AAMA 2502 –Comparative Analysis
9. CAN-BEST MRA
This Presentation
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 3
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
NAFS11 Rating - Individual Units (earlier presentation)
Secondary Designator Canadian Requirement)
Primary Designator
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Composite Unit
A fenestration product consisting of two or more sash, leaves, lites, or sliding door panels within a single frame utilizing an integral mullion.
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 4
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Combination Assembly
An assembly formed by a combination of two or more separate fenestrationproducts whose frames are mulled together utilizing a combination mullion or reinforcing mullion.
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Window WallA non-load-bearing fenestration system provided in combination assemblies and composite units, including transparent vision panels and/or opaque glass or metal panels, which spanfrom the top of a floor slab to the underside of the next higher floor slab.
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 5
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
1. NAFS11 – Unit Rating
2. NAFS11 – Combination Rating
3. AAMA 450 – Mullion Rating
4. Option #1 – Assembly Testing
5. Option #2 – Mullion Testing
6. Option #3 – Calculations by P.E.
7. Grouping
8. AAMA 2502 –Comparative Analysis
9. CAN-BEST MRA
This Presentation
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Mullion Labeling Introducing Product Type MA – Mullion Assembly
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 6
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Great Document
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Labeling Example – Fenestration Canada
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 7
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Rating a Combination Assembly Two options to rate combination assemblies
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Option (a) – One TestTest one Combination Window
1. Test one combination assembly with individual units meeting Gateway dimensions.
2. Rate individual units and mullion assembly separately. The lowest rating governs the Overall Rating.
3. Optional - Determine rating of smaller units having shorter mullion span and smaller tributary areas - AAMA 2502.
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 8
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Option (b)Test individual units
1. Test and rate individual units meeting Gateway dimensions.
2. Test and rate Mullion as per AAMA 450. The lowest rating governs the Overall Rating.
3. Optional - Determine rating of smaller units having shorter mullion span and smaller tributary areas - AAMA 2502.
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
1. NAFS11 – Unit Rating
2. NAFS11 – Combination Rating
3. AAMA 450 – Mullion Rating
4. Option #1 – Assembly Testing
5. Option #2 – Mullion Testing
6. Option #3 – Calculations by P.E.
7. Grouping
8. AAMA 2502 –Comparative Analysis
9. CAN-BEST MRA
This Presentation
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 9
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
AAMA 450Mullion Rating
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
AAMA 450Mullion Rating
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 10
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
1. NAFS11 – Unit Rating
2. NAFS11 – Combination Rating
3. AAMA 450 – Mullion Rating
4. Option #1 – Assembly Testing
5. Option #2 – Mullion Testing
6. Option #3 – Calculations by P.E.
7. Grouping
8. AAMA 2502 –Comparative Analysis
9. CAN-BEST MRA
This Presentation
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Option #1Assembly Testing
Obtained rating qualifies all smaller assembly sizes having shorter mullion span and smaller tributary areas.
Rating applies to same mullion section, seal and end connections.
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 11
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
1. NAFS11 – Unit Rating
2. NAFS11 – Combination Rating
3. AAMA 450 – Mullion Rating
4. Option #1 – Assembly Testing
5. Option #2 – Mullion Testing
6. Option #3 – Calculations by P.E.
7. Grouping
8. AAMA 2502 –Comparative Analysis
9. CAN-BEST MRA
This Presentation
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 12
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 13
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Mullion Cross
Section
Mullion Test Validation
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
1. NAFS11 – Unit Rating
2. NAFS11 – Combination Rating
3. AAMA 450 – Mullion Rating
4. Option #1 – Assembly Testing
5. Option #2 – Mullion Testing
6. Option #3 – Calculations by P.E.
7. Grouping
8. AAMA 2502 –Comparative Analysis
9. CAN-BEST MRA
This Presentation
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 14
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Mullion Cross
Section
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 15
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
1. NAFS11 – Unit Rating
2. NAFS11 – Combination Rating
3. AAMA 450 – Mullion Rating
4. Option #1 – Assembly Testing
5. Option #2 – Mullion Testing
6. Option #3 – Calculations by P.E.
7. Grouping
8. AAMA 2502 –Comparative Analysis
9. CAN-BEST MRA
This Presentation
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Grouping
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 16
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
1. NAFS11 – Unit Rating
2. NAFS11 – Combination Rating
3. AAMA 450 – Mullion Rating
4. Option #1 – Assembly Testing
5. Option #2 – Mullion Testing
6. Option #3 – Calculations by P.E.
7. Grouping
8. AAMA 2502 –Comparative Analysis
9. CAN-BEST MRA
This Presentation
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 17
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
AAMA 2502OptionalComparative Analysis
Allows rating determination for assemblies smaller than the tested assembly.
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
AAMA 2502
NAFS11
9.2.4 Specimen Size
.
.
Except as described in AAMA 2502 and/or WDMA I.S.11, Section 3.4, test results shall be valid only for
products up to and including the width and height of the specimen tested.
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 18
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Calculated Window Rating AAMA 2502
Mullion Cross
Section
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Window Rating – AAMA 2502
Tributary Width
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 19
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
1. NAFS11 – Unit Rating
2. NAFS11 – Combination Rating
3. AAMA 450 – Mullion Rating
4. Option #1 – Assembly Testing
5. Option #2 – Mullion Testing
6. Option #3 – Calculations by P.E.
7. Grouping
8. AAMA 2502 –Comparative Analysis
9. CAN-BEST MRA
This Presentation
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
Making the Leap
Rate your Mullionswith
CAN-BEST MRA Program(Mullion Rating Assessment)
a cost effective mullion rating program based on AAMA 450 – Option #2
Understanding NAFS 11 - AAMA 450, by Elie Alkhoury, M.Eng, P.Eng. 2/8/2017
www.can-best.com 20
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
CAN-BEST MRA – Grouped Products1. Review individual window products and associated
mullions having identical sealing details. Determine weakest window and mullion assembly.
2. If not done previously, test individual units to meet NAFS 11 Gateway Requirements.
3. Test one window assembly for Air, Water and structural.4. Test one mullion assembly as simply supported beam
single-point loading to determine it’s stiffness (EI), and validate with window test EI. Use EI to derive Mullion Assembly DP rating for various mullion spans and tributary width. Verify mullion connections adequacy.
5. Assign SAME rating to all mullion group members.
6. Prepare P.E. sealed AAMA 450 report.
© CAN-BEST 2017
Canadian Building Envelope Science and TechnologyISO 17025, SCC & AAMA Accredited Laboratories
www.can-best.com
CAN-BEST MRA – Individual Products1. Review individual window products and associated
mullions having identical sealing details. Determine weakest window and mullion assembly.
2. If not done previously, test individual units to meet NAFS 11 Gateway Requirements.
3. Test one window assembly for Air, Water and structural.4. Test EACH mullion assembly as simply supported beam
single-point loading to determine it’s stiffness (EI), and validate with window test EI. Use EI to derive Mullion Assembly DP rating for various mullion spans and tributary width. Verify mullion connections adequacy.
5. Assign ACTUAL rating.
6. Prepare P.E. sealed AAMA 450 report for each mullion configuration.