10
Undergraduate Research Experience in Sensors and Applications – Summer 2013 University of Texas Arlington Pyroelectric Infrared Sensors Dr. Donald Buttler Mid-Term Presentation By Dawit T. Woldemariam July 16, 2013

Undergraduate Research Experience in Sensors and Applications – Summer 2013

  • Upload
    lanai

  • View
    18

  • Download
    0

Embed Size (px)

DESCRIPTION

Undergraduate Research Experience in Sensors and Applications – Summer 2013 University of Texas Arlington. Pyroelectric Infrared Sensors Dr. Donald Buttler Mid-Term Presentation By Dawit T. Woldemariam July 16, 2013. Background. - PowerPoint PPT Presentation

Citation preview

Page 1: Undergraduate Research Experience in Sensors and Applications – Summer  2013

Undergraduate Research Experience in Sensors and Applications – Summer 2013

University of Texas Arlington

Pyroelectric Infrared SensorsDr. Donald Buttler

Mid-Term PresentationBy

Dawit T. WoldemariamJuly 16, 2013

Page 2: Undergraduate Research Experience in Sensors and Applications – Summer  2013

Background

All objects above absolute zero emit light corresponding to their temperatures.

The hotter the object is the shorter the wavelength of the emitted light.

Infrared light is an electromagnetic radiation whose wavelength lies between visible light and microwave.

Pyroelectricity is the property of materials to produce a temporary voltage when heated.

Pyroelectric coeficient tells the sensitivity of the material ; the higher the pyroelectric coefficient the more the current produced will be up on heating.

Page 3: Undergraduate Research Experience in Sensors and Applications – Summer  2013

Research Objective

To design a material with the highest possible pyroelectric coefficient to be used in infrared sensor designs.

i=A* P * (dT/dt)

Page 4: Undergraduate Research Experience in Sensors and Applications – Summer  2013

Research Procedure

1. Deposition of PZT on to a substrate2. measuring the temperature ramp (dT/dt) using a

temperature controller 3. measuring capacitances at different temperatures using an

LCR meter for device characterization 4. measuring the piezoelectric current using a parallel resistor

and a multimeter

Page 5: Undergraduate Research Experience in Sensors and Applications – Summer  2013

Deposition of PZT/PCT on to a substrate A measured amount of PZT is deposited on to a silicon-Gold

wafer using pulsed laser deposition (PLD) technique

Page 6: Undergraduate Research Experience in Sensors and Applications – Summer  2013

Why PZT? PZT (Lead Zicronate Titanate ) has a high dielectric

constant and exhibits a strong ferroelectricity. The higher dielectric constant increases the

capacitance , while a strong ferroelectricity produces higher pyroelectric current.

.

Page 7: Undergraduate Research Experience in Sensors and Applications – Summer  2013

Measuring Temperature Ramp The temperature ramp is measured by increasing the

temperature and recording the time.

Capacitance measurment Measuring capacitance vs time is important in determining

different characterstics of the device such as breakdown voltage and conductivity with time

Page 8: Undergraduate Research Experience in Sensors and Applications – Summer  2013

Measurement setup

Thermal Chuck LCR meter

Page 9: Undergraduate Research Experience in Sensors and Applications – Summer  2013

Probe stationgfgf

Page 10: Undergraduate Research Experience in Sensors and Applications – Summer  2013

Application Areas

Infrared sensors in general Some examples : night vision cameras, hospital surgical

devices