IIIIIHIIIIIIIlUlIIIIIIIIIIIIlUlIIIIIIIIII

UNDERCOUNTERDISHWASHER

Model DU1099XT Series

_ers Ice Makers Oishwashers Built In Ovens and SuMace Uilits RallOes Microwave Ovens Trash C0mpaelors Room Air Coflditioner_ Dehumidifiers, Automatic Washers Clothes Dryers Freezers

3368022

ContentsBEFORE YOU USE YOUR DISHWASHERIMPORTANT SAFETY INSTRUCTIONS :_PARTS AND FEATURESFOR BESTRESULTS

The F 'tering SystemQuiet Dperating h_)s

PROPER LOADING :.fop R :cK Loading :,Bolto_ _Pack Loading 0SHverware Basket Loading 6

ADDING DETERGENT ......... 7

PageBEFORE STARTING YOUR DISHWASHER 8STARTING YOUR DISHWASHER 8

Selecting a Cycle .... 8HEAl DRY or AIR DRY .......... 9

Changing a Setting ..... 9To Add a Dish After Starting 9

ENERGY SAVING TIPS ..... 10SPECIAL TIPS ......................... 11

COMMON DISHWASHING PROBLEMS.. 12IF YOU NEED SERVICE OR ASSISTANCE. 15WHIRLPOOL DISHWASHER WARRANTY 16

Jc:1988Whirlpool Corporation

Before you use your dishwasherIt is your personal responsibility and obligation to be sure your dishwasher:

• Is installed by a qualified installer.

• Has been installed where it is protected from the elements.

• Has been installed on a floor strong enough to support itsweight.• Has been properly connected to electricity, water and draint'

• Has been properly electrically grounded;*

• Has had all hang tags and temporary labels removed.

• Is nol used by children or anyone unable to operate it properly.• Is properly maintained.

• See installation instructions for complete information.

Parts and featuresModel DU1099XT Series

UPPERSPRAYARM

TOP RACK

RACK BUMPER

BOTTOM

DETERGENTDISPENSERS

USERGUIDE

[Permanent Laoel

HEATING ELEMENTDOOR COLOR PANEL

SPRAYTOWER

LOWERSPRAYARM

SILVERWAREBASKET

MODEL AND SERIALNUMBER PLATE

(not shown]

THEOVERFLOWPROTECTOR is

designed to preventtoo much water fromentering the dish-washer. II is notremovable.

FILTERSYSTEM(Screen and RemovablePump Guard]

(Op_ yo.r Model and Serial Numbers here..,_/he_ ,/o need service or call with a questior

' 2,re :r_s ID )rmation ready

'! Complete Model and Serial Numbers (from th_oldie Ioc #ea as shown}

2, Durcnasc date from sales slip

Copy this nformation in these spaces Keep lh_sbook and our sales slip together in a handyo!ace

Thank yoa for purchasing a Whirlpool prod-uct. Please complete and mail the Owner Regis-tration Card furnished with this product.

Model Number

Serial Number

Purchase Date

Service Company and Telephone Number

For Best ResultsYour dishwasher cleans by spraying a mix-

ture of hot, clean water and detergent againstsoiled surfaces of dishes When a cycle isstarted, the dishwasher fills with water to about

the level of the heating element This water ispumped through the rotating spray arms,drained through the filter system which re-moves food and soil, and pumped back

through the rotating spray arms. Soiled waterbspumped out and replaced with clean waterduring a cycie-the number of times dependson the cycle oeing used.

Load dishes so soiled surfaces face pow-erful spray from rotating arms.

The self-cleaning filtering system andremovable pump guard help eliminate pre-rinsing by removing food particles from thewater.

The filtering systemIt is not necessary to rinse dishes before

putting them into the dishwasher. Just removelarge pieces and quantities of food and bones,The filtering system helps keep food particlesout of the wash water. Small particles are flushedaway as water is pumped out. Larger particlesare trapped in the pump guard

To remove the pump guard for cleaning..I Wait at least 20 minutes after a cycle tar

the heating element to cool down.2. Unload and remove the bottom rack.

3. Press the outside wail of the pump guard atthe center to release the latch.

4. Lift out and rinse clean.

To replace the pump guard..1 Insert pump guard legs (on inside wall] into

matching openings in filter screen.2. Press down on outside wall until latch snaps

into place3. Replace bottom rack with rack bumpers in

front

Check Water

Temperature

140 F

Water must be hot

For best cleaning and drying results, water should be at least140°F {60°C).t. Turn on hot water faucet nearest the dishwasher, Let water run

until it is as hot as possible.

2. Hold a candy or meat thermometer in the stream of hot water tomeasure the temperature,

3. It the temperature is too low, have a qualified person raise thewater heater thermostat setting,

Quiet operating tips

To avoid thumping and clattering noises dunngoperation:

* Make sure lightweight load items are securedin the rack.

• Make sure pot lids and handles, pizza pans,cookie sheets, et¢, do not touch interior walls

or interfere with either of the spray armsrotation.

• Load dishes so they don't touch one another.

NOTE: Keep sink drain plugs inserted duringdlshwasher operation to prevent noise trans-fer through dralns.

Proper loadingAlways load dishes so soiled surfaces are reached by spray from rolating spray arms.

Water must be able to drain off completely for best drying results. Be careful to separateitems so spray can reach all surfaces.

Top rack leading

The top rack is designed for cups, glassesand smaller items.

a Place so open ends face down for clean-ing and draining.

• Load glosses in top rock only. Bottomrack is not designed for glasses. DamagemQy occur.

Ii• Place items in the rows between prongs.

Placing them over the prongs can leadto breakage.

• Be sure lightweight items are held firmlyin place.

• China, crystal and other delioate itemsmust not touch each other during dish-washer operation. Damage may occur.

MIXED LOAD UTENSIL LOAD

• Load plastic items in the top rack only. • Small bowls, pans and other utensils canOnly plastic items marked "dishwasher be placed in the top rack.safe" are recommended.

• Plastic items can be melted in the bottomrack

• Items with cooked-on or dried-on roods should be loaded in the bottom rack wilh

soiled surfaces facing the spray

Bottom rack loading

MIXED LOAD

/

DISH LOAD

• Make sure pot handles and other items do notstop rotation of either the upper or lower sprayarm. Spray arms must move freely.

• Load items so they do not block or cover spraytower.

• Securely place heavily soiled cookware facedown in rack.

UTENSIL LOAD

• Load cookie sheets, cake pans and otherlarge items at sides and back. Loadingsuch items in fronl may keep wafer sprayfrom reaching detergent dispenser

NOTE:

• Do not load glasses, cups or _Dlastic itemsin the bottom rack.

• When lower rack is removed, repJacewith bumpers in front.

• Place plates, soup bowls, etc,, between

prongs and facing the spray.

ilverware basket loading

odd tiqe sdverware basket while ds in orou! of the boflom rack lhe loaded basket

should be n the right front corner of thebottom rack

,,,,,LOad forks and spoons so they don't

nest together. Spray can't reach nesteditems

Mix items _n each section of the basket

with some pointing up and some down.Small items -baby battle caps, jar lids,

etc - car" de put in any section

Make sure sharp items (knives, larks,skewers, etc] are put in point down. Makesure long items do not slop the upperspray arm from turning.

Adding detergentThe kind and amount of dishwasher detergent you use is an important part of

getling your dishes clean. Read this section carefully.

Use automatic dlsh-

washer detergent only.Other detergents are

too mild and much toosudsy to work in thedishwasher.

Different brands of

dishwasher detergenthave different amounts

of phosphorus. Phospho-rus softens water and

helps prevent waterspots on dishes.

If water is hard andphosphorus conlent is

low [6.0°,'0 or less], youmay need to use more

detergent or use a brandwith a higher phosphoruscontent [8.7% or higher].

Do not add detergentuntil you are ready towash. Fresh automatic

dishwasher detergentis necessary for bestwashing results. Storedetergent tightly closednn a cool dry place.

PHOSPHORUSCONTENT

J

The detergent dispenserThe detergent dispenser has one section with

a cover and one without.• Put detergent in both sections for cycles with

two washes.

• Put detergent in the covered section only forcycles with one wash

• Push the cover downuntil it is latched

The cover opens auto-matically when the mainwash staffs. Detergent inthe open section fallsinto the dishwasherwhen the door is closed.

COVER COVER LATCH

Use covered section for... Use bothLIGHT Cycle sections for...

NORMAL Cycle

How much detergent to useThe amount of detergent to use __,• HARD- Fill 1 or both sections to lop

depends on the hardness of your __,,_'_ line if waler is 8 or more grains oiwater: If too little is used, dishes won't hardness.

be clean. However, if too much is " " _Xused in soft water, glassware will • MEDIUM- Fill 1 or bolh sections tobegin to etcl_ ; " "-,._\ , XX middle line if water is 5 Io 7 grains of

Find out your water's hardness by \ _..._ hardness.

_sk In?LY?Urr s!°f?eQ_eW _ toeL denP¢ _ } ,o._F,,,torbothsect,oos,ocounty extension agent ___ .... bottom line if water is O to 4 grains of

hardness

Before startingyour dishwasher1. Read "Important Safety Instructions" on page

2 before starting your dishwasher.

2. Spin the Upper and Lower Spray Arms tomake sure nothing will stop them from turningfreely.

DRY SELECTOR SWITCH

W.m

/DOOR LATCH

3. Push door firmly when closing and it will auto-matically latch.

4. Run hot water at sink nearest dishwasher untilit is hot. Turn it off.

Starting your dishwasher

NORMAL WASH cycle...

1. Select a drying option.

2. Turn Cycle Control Knob clockwise todot marked NORMAL. The dishwasher

will automatically stad that cycle.

LIGHT WASH cycle...

I. Select a drying option.

2. Turn Cycle Control Knob clockwiseto dot marked LIGHT. The dishwasher

will automatically start that cycle.

Selecting a cycle

RINSE & HOLD cycle...

1. Select AIR DRY OPTION only.

2. Turn Cycle Control Knob clockwiseto dot marked RINSE & HOLD. The dish-

washer will automatically start thatcycle.

NORMAL WASH CycleA double wash for normal to heav-ily soiled loads. [The Energy GuideLabel data is based on this cycle.]Cycle time is about 65 minutes.

CYCLE CONTROL KNOB

LIGHT WASH CycleFor normal, everyday soiled loads.Cycle time is about 60 minutes

RINSE & HOLD CycleFor rinsing a few items to be washedone or more days later. Cycle timeis about 10 minutes.

Use AIR DRY only

HEAT DRY or AIR DRY?

If the HEAT DRY Option is selected, air in thedishwasher is heated during the "dry" part ofthe cycle

If the AIR DRY Option is selected, air in thedishwasher is not heated. Using this option helpssave energy, but dishes take longer to dry (over-

night) and some water spotting may result.Some items (such as plastics) may need toweldrying.

For best results, use a solid rinse aid.

Changing a setting

You can change a setting anytime duringany cycle.

1. Lift up on the door latch to unlatch the doorand stop the cycle. Don't open the door untilthe spray arms stop spinning.

2. Turn the Cycle Control Knob clockwise to thecycle you want.

3. Be sure the detergent dispensers are filledproperly for the new cycle.

4. Press door firmly to latch it. The dishwasherwill automatically start the new cycle.

To add a dish after starting1. To be sure the added item is washed and

rinsed, make sure the Cycle Control Knobhas not passed LIGHT.

2. Lift up on the door latch to unlatch door tostop the cycle. Don't open the door until thespray arms stop spinning.

3. Open the door and add the dish.

4. Close the door Do not latch it. Wait 30 sec-onds for air in the dishwasher to warm up. Thishelps reduce the amount of moisture thatcan come from the vent when restarting thecycle.

5. Press door firmly to latch it. The dishwasherwill automatically start where it stopped

Energy saving tipsYou can help save energy if you:

I, Wash full loads. Running a half-filled dish- 2. Use the LIGHT WASH Cycle for normallywasher uses the same amount of electricity soiled loads. It uses less hot water and energyand hot water as a fully loaded machine, than NORMAL WASH.

3. Airdry dishes when you don't need a rapiddrying cycle. Allow longer drying times(overnight].

4.

5.

7.

Load correctly for best washing results. In-correct loading may cause poor washingand the need to rewash all or part of theload

Don't pre-rinse normally soiled dishes. Se-lect the correct cycle for the load and use

the recommended amount of detergent forgood washing results without hand rinsing.

Use your dishwasher during off-peak hours.Local utilities recommend this to avoid

heavy usage of energy at certain times ofday.

Kitchen cleanup can be done quickly andefficiently through the use of your dishwasher.Most appliance parts that can fit in the dish-washer can be cleaned by it. Burned-on soil,however, should be cleaned by hand.

10

Special tips on dishwasher useRemember, use your dishwasher only for the job it was designed to do.Some items ate not dishwasher safe or may require special care.Read these special tips for the following items:

Aluminum: Aluminum loses its bright, shiny appearance and darkens in color due to minerals inthe water and the alkalinity of the dishwasher detergent Colored aluminum may fade.

TIPS: It washed in the dishwasher avoid placing directly in front of detergent dispenser whereit could be sprinkled with undissolved detergent, causing spotting, pitting, and discoloration.Follow utensil manufacturers' cleaning instructions.

China: Hand-painted, metal-trJmmed_ and antique china fade due to high water temperaturesand a_kaline detergent solution in the dishwasher. NOTE: Delicate, antique items should not bewashed in the dishwasher.

TIPS: Load china carefully, Do not allow pieces to touch each other Test one piece by washing itdaily in the dishwasher for several weeks, Then compare it with the rest of the set to see if colorshave changed.

Crystal and decorative glasses: Crystal can break from sudden exposure to high watertemperature. Metal trim and colorful decoration on glass will fade in time when washed in thedishwasher NOTE: Delicate, antique items should not be washed in the dishwasher.

TIPS: Load crystal carefully in top rack only. Be sure to load a few larger items in the bottom rackto reduce amount of force of water spray reaching glassware from lower spray arm. Use theshortest cycle.

Flat_¥are.* Salty and acidic foods may tarnish silver and stainless flatware if allowed to remain onthe utensils. A film may form on sterling silver and silver plate items washed in a dishwasher. This film iscaused by reaction of silver with chlorine in the detergent. Gold flatware is not dishwasher sale.

TIPS: Rinse flatware as soon as possible, especially if it is not to be washed right away. Dishwasherdetergent may remove antique finishes. Wash by hand. Tarnish and film build-up can be removedwith silver polish.

Cast iron utensils: The seasoned finish will be removed in the dishwasher. Rusting will result,

TIPS: Wash by hand. To re-season, coat with unsalted fat and heat in a slow oven torah hour or two.

Plastics** Many plastics will have "Dishwasher Safe" written on them. Some plastics are heatsensitive and may melt or warp,

TIPS: if in doubt, try one piece. Place in upper rack only. AIR DRY option provides additionalprotection.

Non-stick finish utensils: Most can be washed in the dishwasher.

TIPS: Follow manufacturers' suggestions.

Wood: Many wooden items will crack and warp or lose their finish,

TIPS: Do not wash cutting boards, wooden salad bowls or knives with wooden handles in thedishwasher.

Pewter or pcwter-like materials: May streak, discolor, and pit.

TIPS: To keep pewter at its very best, hand wash with mild detergent

Dishwasher care & cleaning:Exterior - Regular use of a soft damp cloth or spongeand a mild detergent is all that is necessary, in most cases,to Keep the outside of your dishwasher nice looking andclean. Interior Hard water minerals may cause awhite film to build-up on the inside surfaces,especially just beneath the door area,Wear rubber gloves when cleaningthe dishwasher interior. Do not useany type of cleanser other thandishwasher detergent becauseit may cause foaming or sudsing.

Common dishwashing problemsPROBLEM CAUSED BY SOLUTION

Spofllng andfilming{hard water film}

Small particlesdeposited onitems

Dishes not dry

Black marks ondishes

Chipping orbreakingglassware

12

Hard water

Water is nolhot enough

Not enough

detergent, or

improper detergent

"Old" detergent

Improper loading

No rinse aid

AIR DRY Setting used

Spray arm or arms notrotating freely

"Old" detergent

Not enoughdetergent, orimproper detergent

Water is not hot

enough

Water pressure may

be low, dishwasher is

not filling properly

Water is not hot

enough

Improper loading

No rinse aid

AIR DRY Setting used

Aluminum utensilsrubbing against itemsduring washing

Improper loading

Fill detergent dispensers to capacity. Use dishwasher de-tergent with highest available phosphorus content Maybe necessary to install water softener

To remove spols and film, hy a vinegar rinse.

1. Wash and rinse load as usual. Use AIR DRY.2. Remove all metal items.

3 Put 2 cups (500 mL] white vinegar in a container on thebottom rack.

4 Run dishwasher through a complete washing cycle

Water temperature should be at least 140F (60 C]. Setwater heater thermostat tad higher setting Run water atsink until hot before starting

Use more dishwasher detergent. Use detergent with high-est available phosphorus content..especially with hardwater

Use only fresh dishwasher detergent. Store tightly closedcontainer, in opal, dry place. Discard old detergent. Do notfill dispensers until ready to start dishwasher.

Make sure dishes and glassware are loaded so sprayreaches all surfaces and items drain properly Do not ov-erload. Do not nest items

Make sure large items do not block spray from reachingdetergent dispensers

lry a bar rinse aid such as Solid Jet DRY®. Follow packagedirections

Drying without heat may result in some spotting of glassesand silver.

Check spray arms to make sure they turn freely after toad-ing Be sure a utensil has not prevented their turning

Use only fresh dishwasher detergent. Store tightly closedcontainer, in cool, dry place. Discard old detergent. Do notfill dispensers until ready to start dishwasher

Use more dishwasher detergent Use detergent with high-est available phosphorus contenf...especially with hardwater

Water temperalure should be at least 140:F (6OC). Setwater heater thermostat to a higher setting Run water atsink until hot before starting.

If water pressure is low, do not use water tar other purposeswhile dishwasher is running (to assure correct fills].

Water temperature should be at least 14OF (60°C) Setwater heater thermostat to a higher setting Run water atsink until hot before starting.

Make sure dishes and glassware are loaded so sprayreaches all surfaces and items drain properly. Do not ov-erload Do not nestilems

Try a bar rinse aid such as Solid Jet DRY :":.Follow packagedireclJons

Allow more time when using AIR DRY Option, or use HEAT

DRY Plastic items may need towel drying.

Use care In loading aluminum utenslls, especially anyllghtwelght foil container. Place so they do not touchdishes. Remove black marks with plastic scouring padand a mild abrasive cleanse[

Do not overload Load glasses in the top rack only Loadbetween prongs, not over them Glasses loaded overprongs will not be supported and may chip or break

PROBLEM

Dishes notwashing clean

CAUSED BY

Water is nothot enough

SOLUTION

Water temperature should be at least 140°F [60°C]. Set

water heater thermostat to a higher setting Run water at

sink until hot before starting.

Cloudy film onglassware,etchlng -permanentcorreslon

Dishes &Interior ofdishwasher

yellow orbrown

Rust spots onstalnless steel

-OR-Dark spots onflatware -stainless steel,sllver plate, orsterllng

Bronze tarnishon silverplate

improper loading

Spray arm or arms not

rotating freely

Not enough detergent

or improper

detergent

"Old" detergent

Water pressure may

be low, dishwasher is

not filling properly

Too much detergentin soft water

Inadequate rinsing

iron or manganese inwater

Allowing salty oracidic foods such asmayonnaise, vinegarfruit juices, saladdressings, milkproducts to remain onflatwareUndissolveddelergent coming incontact with flatware

SilverpJate is worn offExposed base metallakes on a bronzedhue

Make sure dishes and glassware are loaded so sprayreaches all surfaces and items .drain properly, Do not ov-erload, Do not nest items

Make sure large items do not block spray from reachingdetergent dispensers

Check spray arms to make sure they turn freely after load-ing Be sure a utensil has not prevented their turning

Use more dishwasher detergent. Use detergent with high-est available phosphorus content..especially with hardwater

Use only fresh dishwasher detergent. Store tightly closedcontainer, in cool, dry place. Discard old detergent. Do notfill dispensers until ready to starl dishwasher.If water pressure is low, do not use waler for other purposeswhile dishwasher is running [to assure correct fills)

Check for rainbow hue on glasses, A rainbow hue is thefirst sign of etching (corrosion of glass] Reduce the amountof dishwasher detergent Use a detergent with a lowerphosphorus content.

If water pressure is low do not use water for other purposeswhile dishwasher is running (to assure correct water fills].Make sure dishes and glassware are loaded properly toassure adequate rinsing and draining Do not overload

Temporary remedy:1 Set empty dishwasher for a "one wash" cycle2 Start dishwasher and unlatch door to stop it when Jlhas

filled for the wash part of the cycle.3. Add '& to '2 cup [120 to 240 mL] of citric acid crystals

(usually available in drugstores]4. Close and talch door to complete cycle.Permanent solution: Install an iron or manganese filter tohome wafer supply.

Rinse flatware that is to stand for several hours beforewashing [use Rinse & Hold). Clean stained items with silverpolish and re-wash, Do not put stainless steel and sliverflatware In the same sllverware basket compartment.Direct contact between these metals can cause perma-nerrt damage to the sllver.

Remove spots with silver polish. Avoid spilling concentrateddetergent on wet flatwa re.

Remove tarnish with silver polish Have silverreplated

Water left in

bottom of

dishwasher

Dishwasher cycle not

completed

Clogged drain air

gap

Allow dishwasher to complete cycle

Some plumbing codes require use of a drain air gap be-tween an undercounter dishwasher and the drain systemof the house, The air gap is usually located above the sinkor on the top of the counter near the dishwasher to preventthe possibility of water backing up from the drain into thedishwasher due to a plugged drain, The drain air gap isNOT a part of the dishwasher and is NOT covered by thedishwasher warranty The drain air gap should be keplclean to insure proper draining of the dishwasher

13

If you need service or assistance,we suggest you follow these five steps:|. Before calling for assistance...

Performance problems often result from littlethings you can find and fix yourself without toolsof any kind.

If your dishwasher will not run, or stops duringa cycle:• Is the door tightly closed and securely

latched?• Has the cycle been correctly set.• Is the water turned on?

• Have you checked your home's main fuses orcircuit breaker box?

• Is the dishwasher wired into a live circuit withthe proper voltage?

• If the motor has stopped because of an over-load, it will automatically reset itself within afew minutes, If the motor does not start, call forservice.

If water remains in the dishwasher:

• Has the cycle completed?

• A small amount of remaining water is normal.• Is drain hose or air gap clogged?

If detergent remains in the covered detergentcup:• Is the bottom rack in backwards? (The rack

bumpers should be at the front,]• Isthe dishwasher detergent fresh?• Is the cycle completed?

2. if youneed assistance*...

Call Whirlpool COOL-LINE ° service as-sistance telephone number. Dial free fromanywhere in the U.S.:

1-800-253-1301

and talk with one of our trained Consultants, TheConsultant can instruct you in how to obtain sat-isfactory operation from your appliance or, ifservice is necessary, recommend a qualifiedservice company in your area.

3. If you need service*...

! TEeH ARE /FRANCHISED SERVICEL FRAI -- __

Whirlpool has anationwide net-work of franchisedTECH-CARE * Serv-ice Companies,TECH-CARE servicelechnicians aretrained to fulfill theproduct warrantyand provide afteFwarranty service,

anywhere in the United States. To locate TECH-CARE service in your area, call our COOL-LINEservice assistance telephone number (see Step2] or look in your telephone directory YellowPages under:

APPLIANCES - HOUSEHOLD -

MAJOR - SERVICE & REPAIROR

WHIRLPO0_ APPLIANCESFRANCHSE [£CH CARE SERVI(]E

._,b_RV/( A ('f_MPA \'IA'.q

XYZ SERVICE CO XYZ S_RVICE CO!23 Maple 999 9999 123 Maple

ORWASHING MACHINES, DRYERS

& IRONERS SERVICING

WHIRLPO0_ APPLIANCESFRANCHISED IECH CARE SERVICE

'_EI_YI( "b: (I)_tlt4.\'lE'_XYZ S_.RV CE CO

1,_ Male 999 9999

4. If you have a problem*...

ELECTRICAL APPLIANCES •

MAJOR - REPAIRING & PARTS

WHIRLPOOL APPL ANCESFRANCH ,_EDTECH CARE SER_;CE

.R_V/UE U_MPA _IE._"

999 9999

Call our COOL-LINE service assistance tele-phone number [see Step 2] and talk with one of ourConsultants, or if you prefer, write to:

Mr. Robert StanleyDivision Vice President

Whirlpool Corporation2000 M-63Benton Harbor, MI 49022

5. If you need FSP*replacement parts*...

FSP is a registered trademark of Whirlpool Cor-poration for quality parts. Look for this symbol ofqualify whenever you need a replacement partfor your Whirlpool appliance. FSP replacementparts will fit right and work right, because they aremade 1o the same exacting specifications used tobuild every new Whirlpool appliance,

If you must call or write, please provide: modelnumber, serial number, date of purchase, and acomplete description of the problem. This informa-tion is needed in order to better respond to yourrequest for assistance_

14

Notes

t5

WHI POOU DISHWASHER

WARRANTYDW0002

LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR

FULL ONE-YEAR WARRANTY FSP® replacement parts and repair labor to correct defectsFrom Date of Purchase in materials or workmanship. Service must be provided by a

franchised TECH-CARE ®service company

LIMITED NINE-YEAR WARRANTY FSP replacement of the porcelain tub and/or DURAPERM" innerSecond Through Tenth Year From door should they fail to contain water due to defective materialsDate of Purchase or workmanship.

WHIRLPOOL WILL NOT PAY FOR

A. Service calls to:1. Correct the installation of the dishwasher.

2. Instruct you how to use the dishwasher.3. Replace house fuses or correct house wiring or plumbing.

B. Repairs when dishwasher is used in other than normal, single-family household use.C. Pick up and delivery. This product is designed to be repaired in the home.

D. Damage Io dishwasher caused by accident, misuse, fire, flood, acts of God or use of products notapproved by Whirlpool.

E. Any labor costs during limiled warranty.

WHIRLPOOL CORPORATION SHALLNOT BELIABLEFOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some statesdo not allow the exclusion or limitation of incidental or consequential damages so this limitation or exclusionmay not apply to you. This warranty gives you specific legal rights, and you may also have other rights whichvary from state to state.

Outside the United States, a different warranty may apply. For details, please contact your lranchised Whirlpooldistributor or mililary exchange.

Part No, 3368022

¢1988 Whirlpool Corporation

WhirlpoolPrinted in U.S,A.

_kers, D_sllwashers BuilHn Ovens anOSurface Unils, Aanges Microwave Ovens Trash ComDaciors, Room Air Conditioners Dehumidifiers. Aulomati¢ Washers, C]olhes Dryer_, Freezers. Relrigeral£