Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
leonardodrs.comleonardodrs.com/SignalSolutions
The Modular Scout Solid-State Recorder is a customizable, ultra-small and rugged wideband data recorder designed to capture and store large amounts of data at various speeds, to meet specific requirements.
The recorder’s modular design allows the data I/O to be easily configured. The unit is offered with two interchangeable I/O modules: variable rate data interface (VRDI) - at 1, 2, 3, 4, 5, 6, 7, 8, 16-bit LVDS symbols or analog. The analog interface can accept a standard 70 MHz IF input with 40 MHz of bandwidth real sampling (anti-aliasing and reconstruction filters) or 60 MHz bandwidth I/Q sampling (unfiltered) or in variable rate mode, the user can select a sample rate of their choosing up to 200 MHz with selectable bypass mode. Additional bandwidths supported are 5, 10, 15, and 30 MHz (I/Q format).
A removable flash storage pack supports quick and easy installation and replacement of 1024, 2048 or 3840 GByte storage media.
Command and control is implemented with a remote Java GUI through a Gigabit Ethernet interface. The GUI
supports spectral display during record and playback. Spectral inversion is selectable on the input path and the output path. Multiple Modular Scouts are controlled through the same GUI with Multiple Unit Control (MUC). An embedded GPS receiver supplies timing and location information. Recorded data may be accessed by direct playback, transferred through the Ethernet interface, or transferred by connecting the DRS removable flash storage pack to a workstation.
An LCD display and push button control facilitates operation without the Ethernet interface.
MODULAR SCOUT SOLID STATE RECORDER
ULTRA-SMALL AND RUGGED DATA RECORDER
PRODUCT LINE AND ACCESSORIESNOMENCLATURE DESCRIPTION
SCT-MAIN Base Recorder for Modular Scout
SCT-MOD-AIF-1 Modular Scout Analog IF I/O Module (A/D input D/A output)
SCT-MOD-VRDI Modular Scout VRDI I/O Module
SCT-SP-XXX SATA Interface NAND MLC Flash Removable Storage Packs. See above for details.
RT-1012 Storage Pack Interface – External Expansion Unit to connect Scout Storage Pack to RDA2 series workstation
SCT-SYS-AIF-2 Modular Scout Recorder System consisting of SCT-MAIN, SCT-MOD-AIF-1 and SCT-SP-2048
SCT-SYS-AIF-3 Modular Scout Recorder System consisting of SCT-MAIN, SCT-MOD-AIF-1 and SCT-SP-1024
SCT-BPF-100MHZ External Bandpass Filter for SCT-MOD-AIF-1 60 MHz operation
PN 917737-001, -002 I REV R I April 2017
Cleared by DRS for public release under case number DRSSS0722 dated 12212016. Export of DRS SIGNAL SOLUTIONS products is subject to U.S. export controls. Licenses may be required. This material provides up-to-date general information on product performance and use. It is not contractual in nature, nor does it provide warranty of any kind. Information is subject to change at any time. Copyright © DRS SIGNAL SOLUTIONS 2010 - 2016. All Rights Reserved.
leonardodrs.com/SignalSolutions
Airborne & Intelligence SystemsSignal Solutions (SS)1 Milestone Center Court, Germantown, MD 20876 USATel: + 1.301.948.7550 I [email protected]
MODULAR SCOUT SOLID STATE RECORDER
SYSTEM CAPABILITIESPARAMETER SPECIFICATIONFlexible I/O Capabilities determined by I/O module installed
Command/control and Gigabit Ethernet data interface
Remote GUI Provides full control of the Modular Scout and display of Power Spectral Density Data
Front panel Limited control via LCD display with push button control
MODULAR I/O MODULESMODULE DESCRIPTIONAnalog A/D-D/A 70 MHz IF 40 MHz bandwidth real sampling or variable rate mode or 60 MHz bandwidth I/Q sampling (unfiltered)
VRDI Digital Input LVDS, 16-bit, 50 MHz maximum clock rate
SWAP (WITH I/O MODULE & STORAGE PACK)PARAMETER SPECIFICATIONSize (WxLxH) 4.0 x 8.6x 2.6 inches
Weight 3.2 lbs.
Power 6-16 Vdc
VRDI 13 watts maximum
Analog 16.5 watts maximum (40 MHz BW) 19.75 watts maximum (60 MHz BW)
ENVIRONMENTAL*PARAMETER SPECIFICATIONOperating temperature 0° to +50°C
Non-operating -20° to +70°C temperature
Humidity 10 to 90% non-condensing
Altitude Up to 10,000 ft.
FLASH STORAGE PACK CAPACITIES & RECORD TIMESSTORAGE PACK DESCRIPTIONSCT-SP-1024 1024 GBytes of encryption-enabled storage
Record times analog 2 hours, 12-bit data at 93 MSPS 3 hours, 8-bit data at 93 Msps 84 minutes, 8-bit data at 200 Msps
Record times VRDI 5 hours 40 minutes, 8-bit data at 50 Mbytes/sec
SCT-SP-2048 2048 GBytes of raw storage
Record times analog 4 hours, 12-bit data at 93 Msps 6 hours, 8-bit data at 93 Msps 168 minutes, 8-bit data at 200 Msps
Record times VRDI 11 hours 20 minutes, 8-bit data at 50 Mbytes/sec
SCT-SP-3840 3840 GBytes of raw storage
Record times analog 7 hours 30 minutes, 12-bit data at 93 Msps 11 hours 20 minutes, 8-bit data at 93 Msps 5 hours 20 minutes, 8-bit data at 200 Msps
Record times VRDI 21 hours 15 minutes, 8-bit data at 50 Mybtes/sec
*Contact factory for environmental requirements beyond these limits.
The highly configurable Modular Scout Solid State Recorder is designed for many applications including survey recording of signal environments and playback, pre- and post-demodulation signal collection, system validation, and training.
I/O Module
Main Chassis
Solid State Storage
I/O Module
Main Chassis
Storage Pack