Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Please glue them by aligning
the red and red/blue and blue
parts if they are marked on
the paper.
2
Note
Basic working method and markingsTo begin
How to assemble
Tools and materials needed
Items of Caution
-Ruler - scissors - blade cutter or "Exacto-knife" - awl or
other pointed tool (for making a folding crease) - felt pen
- pin set - glue - hand towel ( for cleaning your fingers) -
dictionary or other heavy book ( to press the papers flat).
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size. There
may be differences in dimensions, depending on the
type of printer used.
*Follow the working method and markings carefully.
*Cut carefully along the outter line with cutting blade,
Exacto-knife or scissors.
One - point Advice
*Before beginning assembly, test adhesive amounts
on extra paper.
*Cut carefully with cutting blade, Exacto-knife or
scissors.
*Occasionally, white spots will be apparent on folds
and cuts. Use a marker or pencil to fill in these spots.
It is recommended that this be done after each stage
of assembly because coloring becomes more difficult
once parts are assembled.
*As an adhesive, white wood glue is recommended.
Avoidoverapplicationas thismaycause thepaper to
wrinkle.
*For folding parts, first use an awl or other pointed
tool to make a light crease along the dotted or solid
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.
Do not fold or cut the parts
marked .
Red circles are the reference
posi ons for gluing surfaces.
These shaded areas indicate
where glue should be applied.
Cut out parts marked with an
asterisk(*).
Cut along these lines.
Dotted line
Fold along these lines.
The printed surface should be
on the inside of the folded shape.
Broken lines
Fold along these lines.
The printed surface should be
on the outside of the folded shape.
Solid lines
3
1
2
33
4
5
5 5
5
5
66
6
6 6
6
6
78
9
10
11
12
13
A-19(20)
A-33(34)
A-31(32) A-23(24)
A-21(22)
A-25(26)
A-15(16)
A-3(4)
A-7(8)
A-13(14)
A-73
A-77
A-27(28)
A-29(30)
A-71
A-5(6)
A-1(2)
A-75
A-17(18)
A-11(12)
A-9(10)
A-69
Engine 1Sheet A, 39 parts in total
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Engine
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.
*Assemble both sides. The diagramshows the left side. The number insidethe ( ) is for the right side.
13
4
1
2
33
4
5
55
5
5
66
6
66
6
6
78
9
10
11
12
13
A-53(54)
A-67(68)
A-65(66)A-59(60)
A-55(56)
A-57(58)
A-49(50)
A-37(38)
A-41(42)
A-47(48)
A-74
A-78
A-61(62)
A-63(64)
A-72
A-39(40)
A-35(36)
A-76
A-51(52)
A-45(46)
A-43(44)
A-70
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Engine
Engine 2Sheet A, 39 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.
*Assemble both sides. The diagramshows the left side. The number insidethe ( ) is for the right side.
13
5
1
2 3
3
4
4
A-89
A-85
A-117
A-116
A-115
A-87
A-81
A-91
A-95
A-79
A-83
A-97
A-99
A-93
Engine 4Sheet A, 3 parts in total
Engine 3Sheet A, 11 parts in total
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Engine
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.4
6
1
23
3
4
4
A-118A-119 A-120
A-121
A-92
A-84
A-88
A-80
A-90
A-94
A-82
A-85
A-98
A-100
A-95
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Engine
Engine 5Sheet A, 11 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.4
Engine 6Sheet A, 4 parts in total
7
1
1
2
3
4
5
1
234
5
6
7
A-113
A-114
A-109 A-112
A-110
A-111
A-105
A-104
A-103
A-107
A-108
A-106
A-101
A-102
1Glue in order from to on the graphic.
Engine 7Sheet A, 6 parts in total
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Engine
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.5
Engine 8Sheet A, 8 parts in total
7
7
8
1
1
1
2
2
3
A-129
A-127
A-128
A-123
A-125
A-124
A-122
1Glue in order from to on the graphic.
Engine 9Sheet A, 8 parts in total
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Engine
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.
*Assemble both sides. The diagramshows the left side. The number insidethe ( ) is for the right side.
Engine 10Sheet A, 3 parts in total
3
2
9
1
2
3
4 5
6
7
A-148
A-149
A-145
A-136
A-130A-137,138,139,140,141,142,143,144
A-132
A-146
A-147
A-133
A-131
A-134A-135
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Engine
Engine 11Sheet A, 15 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.
Engine 12Sheet A, 5 parts in total
7
10
1
1
2
2
3
3
3
3
4
4
5
5
6
6
7
89
1011
A-160A-168 A-167
A-159
A-150
A-151
A-154
A-155
A-156
A-153
A-165A-166
A-157A-158
A-161
A-164 A-163
A-162
A-152
Reference photo
1Glue in order from to on the graphic.
1Glue in order from to on the graphic.
Engine 13Sheet A, 7 parts in total
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Engine
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
Engine 14Sheet A, 12 parts in total
6
11
11
12
34 5
6
7
8
A-181
A-180
A-173
A-170
A-171
A-177
A-169
A-176
A-172Engine 15
Engine 14
Engine 13
1Glue in order from to on the graphic.
Engine 15Sheet A, 3 parts in total
Engine 16Sheet A, 28 parts in total
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Engine
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
8
12
1
23
4
5
6
7
88
99
10
11
12
13
14
15
16
16
1718 18
19 19
20
20
21
23
23
22
A-184
A-183
A-188
A-172
A-175
A-189
A-179
A-174
A-187 A-186
A-178
A-185
A-182
Engine 7
Engine 16
Engine 6
Engine 4
Engine 1Engine 1
Engine 3
Engine 1
Engine 2
Engine 5
Engine 12
Engine 11
Engine 10
Engine 9
Engine 8
EngineSheet A, 189 parts in total
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Engine
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.23
13
6
1
2
3
4
5
5
6
78
8
8
8
9
9
10
10
11
1111
11
12
1212
12
13
13
13
13 B-9
B-11
B-22
B-26B-7
B-13
B-14
B-8
B-25
B-21
B-10
B-23
B-27
B-3
B-16
B-18
B-5
B-6
B-1
B-24
B-20
B-15
B-12
B-17
B-19
B-2
B-4
Intake 1Sheet B, 27 parts in total
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
2 Assembling the Intake 1
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.13
12345678910111213